andrey
/
Marlin_FB4S
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

Add RAMPS 1.4.4 to AGCM4 (#16606)

pull/1/head
Giuliano Zaro 5 years ago
committed by GitHub
parent
a16f3baecc
commit
ff0c931e47
No known key found for this signature in database GPG Key ID: 4AEE18F83AFDEB23
6 changed files with 632 additions and 3 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 2
      .github/workflows/test-builds.yml
  2. 2
      Marlin/src/HAL/HAL_SAMD51/timers.h
  3. 6
      Marlin/src/core/boards.h
  4. 7
      Marlin/src/pins/pins.h
  5. 611
      Marlin/src/pins/samd/pins_RAMPS_144.h
  6. 7
      buildroot/share/tests/SAMD51_grandcentral_m4-tests

2
.github/workflows/test-builds.yml
View File

@ -32,6 +32,7 @@ jobs:
- megaatmega2560
- teensy31
- teensy35
- SAMD51_grandcentral_m4
# Extended AVR Environments
@ -75,7 +76,6 @@ jobs:
#- mks_robin_lite
#- mks_robin_mini
#- mks_robin_nano
#- SAMD51_grandcentral_m4
steps:

2
Marlin/src/HAL/HAL_SAMD51/timers.h
View File

@ -29,7 +29,7 @@
typedef uint32_t hal_timer_t;
#define HAL_TIMER_TYPE_MAX 0xFFFFFFFF
#define HAL_TIMER_RATE SystemCoreClock // frequency of timers peripherals
#define HAL_TIMER_RATE F_CPU // frequency of timers peripherals
#define STEP_TIMER_NUM 0 // index of timer to use for stepper (also +1 for 32bits counter)
#define PULSE_TIMER_NUM STEP_TIMER_NUM

6
Marlin/src/core/boards.h
View File

@ -295,7 +295,6 @@
#define BOARD_GTM32_MINI_A30 4022 // STM32F103VET6 controller
#define BOARD_GTM32_REV_B 4023 // STM32F103VET6 controller
//
// ARM Cortex-M4F
//
@ -340,6 +339,11 @@
#define BOARD_MRR_ESPE 6002
#define BOARD_E4D_BOX 6003 // E4d@BOX
//
// SAMD51 ARM Cortex M4
//
#define BOARD_AGCM4_RAMPS_144 6100 // RAMPS 1.4.4
//
// Simulations
//

7
Marlin/src/pins/pins.h
View File

@ -578,6 +578,13 @@
#elif MB(E4D_BOX)
#include "esp32/pins_E4D.h" // ESP32 env:esp32
//
// Adafruit Grand Central M4 (SAMD51 ARM Cortex-M4)
//
#elif MB(AGCM4_RAMPS_144)
#include "samd/pins_RAMPS_144.h" // SAMD51 env:SAMD51_grandcentral_m4
//
// Linux Native Debug board
//

611
Marlin/src/pins/samd/pins_RAMPS_144.h
View File

@ -0,0 +1,611 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* AGCM4 with RAMPS v1.4.4 pin assignments
*/
#ifndef ARDUINO_GRAND_CENTRAL_M4
#error "Oops! Select 'Adafruit Grand Central M4' in 'Tools > Board.'"
#endif
#ifndef BOARD_INFO_NAME
#define BOARD_INFO_NAME "AGCM4 RAMPS 1.4.4"
#endif
//
// Servos
//
#define SERVO0_PIN 11
#define SERVO1_PIN 6
#define SERVO2_PIN 5
#define SERVO3_PIN 4
//
// EEPROM
//
#define E2END 0x7FFF // 32Kb (24lc256)
#define I2C_EEPROM // EEPROM on I2C-0
//
// Limit Switches
//
#define X_MIN_PIN 3
#define X_MAX_PIN 2
#define Y_MIN_PIN 14
#define Y_MAX_PIN 15
#define Z_MIN_PIN 18
#define Z_MAX_PIN 19
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 18
#endif
//
// Steppers
//
#define X_STEP_PIN 67 // Mega/Due:54 - AGCM4:67
#define X_DIR_PIN 68 // Mega/Due:55 - AGCM4:68
#define X_ENABLE_PIN 38
#ifndef X_CS_PIN
#define X_CS_PIN 47
#endif
#define Y_STEP_PIN 73 // Mega/Due:60 - AGCM4:73
#define Y_DIR_PIN 74 // Mega/Due:61 - AGCM4:74
#define Y_ENABLE_PIN 69 // Mega/Due:56 - AGCM4:69
#ifndef Y_CS_PIN
#define Y_CS_PIN 45
#endif
#define Z_STEP_PIN 46
#define Z_DIR_PIN 48
#define Z_ENABLE_PIN 54 // Mega/Due:62 - AGCM4:54
#ifndef Z_CS_PIN
#define Z_CS_PIN 32
#endif
#define Z2_STEP_PIN 36
#define Z2_DIR_PIN 34
#define Z2_ENABLE_PIN 30
#ifndef Z2_CS_PIN
#define Z2_CS_PIN 22
#endif
#define E0_STEP_PIN 26
#define E0_DIR_PIN 28
#define E0_ENABLE_PIN 24
#ifndef E0_CS_PIN
#define E0_CS_PIN 43
#endif
//
// Temperature Sensors
//
#define TEMP_0_PIN 13
#define TEMP_BED_PIN 14
#define TEMP_CHAMBER_PIN 15
//
// Heaters / Fans
//
#define HEATER_0_PIN 10
#define HEATER_BED_PIN 8
#define FAN_PIN 9
#define FAN1_PIN 7
#define FAN2_PIN 12
//
// Misc. Functions
//
#define SDSS 53
#define LED_PIN 13
#ifndef FILWIDTH_PIN
#define FILWIDTH_PIN 5 // Analog Input on AUX2
#endif
// RAMPS 1.4 DIO 4 on the servos connector
#ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN 4
#endif
#ifndef PS_ON_PIN
#define PS_ON_PIN 39
#endif
#if ENABLED(CASE_LIGHT_ENABLE) && !defined(CASE_LIGHT_PIN) && !defined(SPINDLE_LASER_ENA_PIN)
#if NUM_SERVOS <= 1 // Prefer the servo connector
#define CASE_LIGHT_PIN 6 // Hardware PWM
#endif
#endif
//
// M3/M4/M5 - Spindle/Laser Control
//
#if HAS_CUTTER && !defined(SPINDLE_LASER_ENA_PIN)
#if !NUM_SERVOS // Use servo connector if possible
#define SPINDLE_LASER_ENA_PIN 4 // Pullup or pulldown!
#define SPINDLE_LASER_PWM_PIN 6 // Hardware PWM
#define SPINDLE_DIR_PIN 5
#else
#error "No auto-assignable Spindle/Laser pins available."
#endif
#endif
//
// TMC software SPI
//
#if ENABLED(TMC_USE_SW_SPI)
#ifndef TMC_SW_MOSI
#define TMC_SW_MOSI 58 // Mega/Due:66 - AGCM4:58
#endif
#ifndef TMC_SW_MISO
#define TMC_SW_MISO 44
#endif
#ifndef TMC_SW_SCK
#define TMC_SW_SCK 56 // Mega/Due:64 - AGCM4:56
#endif
#endif
#if HAS_TMC220x
/**
* TMC2208/TMC2209 stepper drivers
*
* Hardware serial communication ports.
* If undefined software serial is used according to the pins below
*/
//#define X_HARDWARE_SERIAL Serial1
//#define X2_HARDWARE_SERIAL Serial1
//#define Y_HARDWARE_SERIAL Serial1
//#define Y2_HARDWARE_SERIAL Serial1
//#define Z_HARDWARE_SERIAL Serial1
//#define Z2_HARDWARE_SERIAL Serial1
//#define E0_HARDWARE_SERIAL Serial1
//#define E1_HARDWARE_SERIAL Serial1
//#define E2_HARDWARE_SERIAL Serial1
//#define E3_HARDWARE_SERIAL Serial1
//#define E4_HARDWARE_SERIAL Serial1
//
// Software serial
//
#ifndef X_SERIAL_TX_PIN
#define X_SERIAL_TX_PIN 47
#endif
#ifndef X_SERIAL_RX_PIN
#define X_SERIAL_RX_PIN 47
#endif
#ifndef X2_SERIAL_TX_PIN
#define X2_SERIAL_TX_PIN -1
#endif
#ifndef X2_SERIAL_RX_PIN
#define X2_SERIAL_RX_PIN -1
#endif
#ifndef Y_SERIAL_TX_PIN
#define Y_SERIAL_TX_PIN 45
#endif
#ifndef Y_SERIAL_RX_PIN
#define Y_SERIAL_RX_PIN 45
#endif
#ifndef Y2_SERIAL_TX_PIN
#define Y2_SERIAL_TX_PIN -1
#endif
#ifndef Y2_SERIAL_RX_PIN
#define Y2_SERIAL_RX_PIN -1
#endif
#ifndef Z_SERIAL_TX_PIN
#define Z_SERIAL_TX_PIN 32
#endif
#ifndef Z_SERIAL_RX_PIN
#define Z_SERIAL_RX_PIN 32
#endif
#ifndef Z2_SERIAL_TX_PIN
#define Z2_SERIAL_TX_PIN 22
#endif
#ifndef Z2_SERIAL_RX_PIN
#define Z2_SERIAL_RX_PIN 22
#endif
#ifndef E0_SERIAL_TX_PIN
#define E0_SERIAL_TX_PIN 43
#endif
#ifndef E0_SERIAL_RX_PIN
#define E0_SERIAL_RX_PIN 43
#endif
#ifndef E1_SERIAL_TX_PIN
#define E1_SERIAL_TX_PIN -1
#endif
#ifndef E1_SERIAL_RX_PIN
#define E1_SERIAL_RX_PIN -1
#endif
#ifndef E2_SERIAL_TX_PIN
#define E2_SERIAL_TX_PIN -1
#endif
#ifndef E2_SERIAL_RX_PIN
#define E2_SERIAL_RX_PIN -1
#endif
#ifndef E3_SERIAL_TX_PIN
#define E3_SERIAL_TX_PIN -1
#endif
#ifndef E3_SERIAL_RX_PIN
#define E3_SERIAL_RX_PIN -1
#endif
#ifndef E4_SERIAL_TX_PIN
#define E4_SERIAL_TX_PIN -1
#endif
#ifndef E4_SERIAL_RX_PIN
#define E4_SERIAL_RX_PIN -1
#endif
#ifndef E5_SERIAL_TX_PIN
#define E5_SERIAL_TX_PIN -1
#endif
#ifndef E5_SERIAL_RX_PIN
#define E5_SERIAL_RX_PIN -1
#endif
#ifndef E6_SERIAL_TX_PIN
#define E6_SERIAL_TX_PIN -1
#endif
#ifndef E6_SERIAL_RX_PIN
#define E6_SERIAL_RX_PIN -1
#endif
#ifndef E7_SERIAL_TX_PIN
#define E7_SERIAL_TX_PIN -1
#endif
#ifndef E7_SERIAL_RX_PIN
#define E7_SERIAL_RX_PIN -1
#endif
#endif
//////////////////////////
// LCDs and Controllers //
//////////////////////////
#if HAS_SPI_LCD
//
// LCD Display output pins
//
#if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
// TO TEST
// #define LCD_PINS_RS 49 // CS chip select /SS chip slave select
// #define LCD_PINS_ENABLE 51 // SID (MOSI)
// #define LCD_PINS_D4 52 // SCK (CLK) clock
#elif BOTH(NEWPANEL, PANEL_ONE)
// TO TEST
// #define LCD_PINS_RS 40
// #define LCD_PINS_ENABLE 42
// #define LCD_PINS_D4 57 // Mega/Due:65 - AGCM4:57
// #define LCD_PINS_D5 58 // Mega/Due:66 - AGCM4:58
// #define LCD_PINS_D6 44
// #define LCD_PINS_D7 56 // Mega/Due:64 - AGCM4:56
#else
#if ENABLED(CR10_STOCKDISPLAY)
// TO TEST
// #define LCD_PINS_RS 27
// #define LCD_PINS_ENABLE 29
// #define LCD_PINS_D4 25
#if DISABLED(NEWPANEL)
// TO TEST
// #define BEEPER_PIN 37
#endif
#elif ENABLED(ZONESTAR_LCD)
// TO TEST
// #define LCD_PINS_RS 56 // Mega/Due:64 - AGCM4:56
// #define LCD_PINS_ENABLE 44
// #define LCD_PINS_D4 55 // Mega/Due:63 - AGCM4:55
// #define LCD_PINS_D5 40
// #define LCD_PINS_D6 42
// #define LCD_PINS_D7 57 // Mega/Due:65 - AGCM4:57
#else
#if EITHER(MKS_12864OLED, MKS_12864OLED_SSD1306)
// TO TEST
// #define LCD_PINS_DC 25 // Set as output on init
// #define LCD_PINS_RS 27 // Pull low for 1s to init
// DOGM SPI LCD Support
// #define DOGLCD_CS 16
// #define DOGLCD_MOSI 17
// #define DOGLCD_SCK 23
// #define DOGLCD_A0 LCD_PINS_DC
#else
#define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 23
#define LCD_PINS_D5 25
#define LCD_PINS_D6 27
#endif
#define LCD_PINS_D7 29
#if DISABLED(NEWPANEL)
#define BEEPER_PIN 33
#endif
#endif
#if DISABLED(NEWPANEL)
// Buttons attached to a shift register
// Not wired yet
//#define SHIFT_CLK 38
//#define SHIFT_LD 42
//#define SHIFT_OUT 40
//#define SHIFT_EN 17
#endif
#endif
//
// LCD Display input pins
//
#if ENABLED(NEWPANEL)
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
#define BEEPER_PIN 37
#if ENABLED(CR10_STOCKDISPLAY)
// TO TEST
// #define BTN_EN1 17
// #define BTN_EN2 23
#else
#define BTN_EN1 31
#define BTN_EN2 33
#endif
#define BTN_ENC 35
#ifndef SD_DETECT_PIN
#define SD_DETECT_PIN 49
#endif
#define KILL_PIN 41
#if ENABLED(BQ_LCD_SMART_CONTROLLER)
// TO TEST
// #define LCD_BACKLIGHT_PIN 39
#endif
#elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
// TO TEST
// #define BTN_EN1 56 // Mega/Due:64 - AGCM4:56
// #define BTN_EN2 72 // Mega/Due:59 - AGCM4:72
// #define BTN_ENC 55
// #define SD_DETECT_PIN 42
#elif ENABLED(LCD_I2C_PANELOLU2)
// TO TEST
// #define BTN_EN1 47
// #define BTN_EN2 43
// #define BTN_ENC 32
// #define LCD_SDSS SDSS
// #define KILL_PIN 41
#elif ENABLED(LCD_I2C_VIKI)
// TO TEST
// #define BTN_EN1 40 // http://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42.
// #define BTN_EN2 42
// #define BTN_ENC -1
// #define LCD_SDSS SDSS
// #define SD_DETECT_PIN 49
#elif ANY(VIKI2, miniVIKI)
// TO TEST
// #define DOGLCD_CS 45
// #define DOGLCD_A0 44
// #define LCD_SCREEN_ROT_180
// #define BEEPER_PIN 33
// #define STAT_LED_RED_PIN 32
// #define STAT_LED_BLUE_PIN 35
// #define BTN_EN1 22
// #define BTN_EN2 7
// #define BTN_ENC 39
// #define SD_DETECT_PIN -1 // Pin 49 for display SD interface, 72 for easy adapter board
// #define KILL_PIN 31
#elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
// TO TEST
// #define DOGLCD_CS 29
// #define DOGLCD_A0 27
// #define BEEPER_PIN 23
// #define LCD_BACKLIGHT_PIN 33
// #define BTN_EN1 35
// #define BTN_EN2 37
// #define BTN_ENC 31
// #define LCD_SDSS SDSS
// #define SD_DETECT_PIN 49
// #define KILL_PIN 41
#elif EITHER(MKS_MINI_12864, FYSETC_MINI_12864)
// TO TEST
//#define BEEPER_PIN 37
//#define BTN_ENC 35
//#define SD_DETECT_PIN 49
//#ifndef KILL_PIN
// #define KILL_PIN 41
//#endif
#if ENABLED(MKS_MINI_12864) // Added in Marlin 1.1.6
// TO TEST
// #define DOGLCD_A0 27
// #define DOGLCD_CS 25
// GLCD features
// Uncomment screen orientation
// #define LCD_SCREEN_ROT_90
// #define LCD_SCREEN_ROT_180
// #define LCD_SCREEN_ROT_270
// not connected to a pin
// #define LCD_BACKLIGHT_PIN 57 // backlight LED on A11/D? (Mega/Due:65 - AGCM4:57)
// #define BTN_EN1 31
// #define BTN_EN2 33
#elif ENABLED(FYSETC_MINI_12864)
// From https://wiki.fysetc.com/Mini12864_Panel/?fbclid=IwAR1FyjuNdVOOy9_xzky3qqo_WeM5h-4gpRnnWhQr_O1Ef3h0AFnFXmCehK8
// TO TEST
// #define DOGLCD_A0 16
// #define DOGLCD_CS 17
// #define BTN_EN1 33
// #define BTN_EN2 31
//#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems
// results in LCD soft SPI mode 3, SD soft SPI mode 0
// #define LCD_RESET_PIN 23 // Must be high or open for LCD to operate normally.
#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
#ifndef RGB_LED_R_PIN
// TO TEST
// #define RGB_LED_R_PIN 25
#endif
#ifndef RGB_LED_G_PIN
// TO TEST
// #define RGB_LED_G_PIN 27
#endif
#ifndef RGB_LED_B_PIN
// TO TEST
// #define RGB_LED_B_PIN 29
#endif
#elif ENABLED(FYSETC_MINI_12864_2_1)
// TO TEST
// #define NEOPIXEL_PIN 25
#endif
#endif
#elif ENABLED(MINIPANEL)
// TO TEST
// #define BEEPER_PIN 42
// not connected to a pin
// #define LCD_BACKLIGHT_PIN 57 // backlight LED on A11/D? (Mega/Due:65 - AGCM4:57)
// #define DOGLCD_A0 44
// #define DOGLCD_CS 58 // Mega/Due:66 - AGCM4:58
// GLCD features
// Uncomment screen orientation
// #define LCD_SCREEN_ROT_90
// #define LCD_SCREEN_ROT_180
// #define LCD_SCREEN_ROT_270
// #define BTN_EN1 40
// #define BTN_EN2 55 // Mega/Due:63 - AGCM4:55
// #define BTN_ENC 72 // Mega/Due:59 - AGCM4:72
// #define SD_DETECT_PIN 49
// #define KILL_PIN 56 // Mega/Due:64 - AGCM4:56
#elif ENABLED(ZONESTAR_LCD)
// TO TEST
// #define ADC_KEYPAD_PIN 12
#elif ENABLED(AZSMZ_12864)
// TO TEST
#else
// Beeper on AUX-4
// #define BEEPER_PIN 33
// Buttons are directly attached to AUX-2
#if ENABLED(REPRAPWORLD_KEYPAD)
// TO TEST
// #define SHIFT_OUT 40
// #define SHIFT_CLK 44
// #define SHIFT_LD 42
// #define BTN_EN1 56 // Mega/Due:64 - AGCM4:56
// #define BTN_EN2 72 // Mega/Due:59 - AGCM4:72
// #define BTN_ENC 55 // Mega/Due:63 - AGCM4:55
#elif ENABLED(PANEL_ONE)
// TO TEST
// #define BTN_EN1 72 // AUX2 PIN 3 (Mega/Due:59 - AGCM4:72)
// #define BTN_EN2 55 // AUX2 PIN 4 (Mega/Due:63 - AGCM4:55)
// #define BTN_ENC 49 // AUX3 PIN 7
#else
// TO TEST
// #define BTN_EN1 37
// #define BTN_EN2 35
// #define BTN_ENC 31
#endif
#if ENABLED(G3D_PANEL)
// TO TEST
// #define SD_DETECT_PIN 49
// #define KILL_PIN 41
#endif
#endif
#endif // NEWPANEL
#endif // HAS_SPI_LCD
//
// SD Support
//
#ifndef SDCARD_CONNECTION
#define SDCARD_CONNECTION ONBOARD
#endif
#if SD_CONNECTION_IS(ONBOARD)
#undef SDSS
#define SDSS 83
#undef SD_DETECT_PIN
#define SD_DETECT_PIN 95
#endif

7
buildroot/share/tests/SAMD51_grandcentral_m4-tests
View File

@ -6,5 +6,12 @@
# exit on first failure
set -e
#
# Build with the default configurations
#
restore_configs
opt_set MOTHERBOARD BOARD_AGCM4_RAMPS_144
exec_test $1 $2 "Build Grand Central M4 Default Configuration"
# clean up
restore_configs

Write Preview
Loading…
Cancel
Save