Browse Source

Clean up and finish #5887

pull/1/head
Scott Lahteine 8 years ago
parent
commit
fb4aead2b1
  1. 13
      Marlin/Configuration_adv.h
  2. 7
      Marlin/example_configurations/Cartesio/Configuration_adv.h
  3. 7
      Marlin/example_configurations/Felix/Configuration_adv.h
  4. 7
      Marlin/example_configurations/Hephestos/Configuration_adv.h
  5. 7
      Marlin/example_configurations/Hephestos_2/Configuration_adv.h
  6. 7
      Marlin/example_configurations/K8200/Configuration_adv.h
  7. 7
      Marlin/example_configurations/K8400/Configuration_adv.h
  8. 7
      Marlin/example_configurations/RigidBot/Configuration_adv.h
  9. 7
      Marlin/example_configurations/SCARA/Configuration_adv.h
  10. 7
      Marlin/example_configurations/TAZ4/Configuration_adv.h
  11. 7
      Marlin/example_configurations/WITBOX/Configuration_adv.h
  12. 7
      Marlin/example_configurations/delta/generic/Configuration_adv.h
  13. 7
      Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
  14. 7
      Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
  15. 7
      Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
  16. 7
      Marlin/example_configurations/makibox/Configuration_adv.h
  17. 7
      Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
  18. 27
      Marlin/ultralcd.cpp

13
Marlin/Configuration_adv.h

@ -1128,17 +1128,12 @@
*/
//#define EXTENDED_CAPABILITIES_REPORT
/**
* Double Clicking of LCD Panel's Encoder Wheel while at the Status Screen will jump
* to the Z-BabyStepping menu.
* Double-click the Encoder button on the Status Screen for Z Babystepping.
*/
//#define DOUBLE_CLICK_JUMPS_TO_Z_BABYSTEPPING
#define DOUBLE_CLICK_TIME_WINDOW 1250 // How quickly the double click must be done in miliseconds.
// Please notice this time must be a little bit longer than what
// is actually desired because there is some latency in detecting a
// change in LCD Panel Button Status.
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: You may need to add extra time to mitigate controller latency.
/**
* Volumetric extrusion default state

7
Marlin/example_configurations/Cartesio/Configuration_adv.h

@ -1125,6 +1125,13 @@
*/
//#define EXTENDED_CAPABILITIES_REPORT
/**
* Double-click the Encoder button on the Status Screen for Z Babystepping.
*/
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: You may need to add extra time to mitigate controller latency.
/**
* Volumetric extrusion default state
* Activate to make volumetric extrusion the default method,

7
Marlin/example_configurations/Felix/Configuration_adv.h

@ -1125,6 +1125,13 @@
*/
//#define EXTENDED_CAPABILITIES_REPORT
/**
* Double-click the Encoder button on the Status Screen for Z Babystepping.
*/
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: You may need to add extra time to mitigate controller latency.
/**
* Volumetric extrusion default state
* Activate to make volumetric extrusion the default method,

7
Marlin/example_configurations/Hephestos/Configuration_adv.h

@ -1125,6 +1125,13 @@
*/
//#define EXTENDED_CAPABILITIES_REPORT
/**
* Double-click the Encoder button on the Status Screen for Z Babystepping.
*/
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: You may need to add extra time to mitigate controller latency.
/**
* Volumetric extrusion default state
* Activate to make volumetric extrusion the default method,

7
Marlin/example_configurations/Hephestos_2/Configuration_adv.h

@ -1108,6 +1108,13 @@
*/
//#define EXTENDED_CAPABILITIES_REPORT
/**
* Double-click the Encoder button on the Status Screen for Z Babystepping.
*/
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: You may need to add extra time to mitigate controller latency.
/**
* Volumetric extrusion default state
* Activate to make volumetric extrusion the default method,

7
Marlin/example_configurations/K8200/Configuration_adv.h

@ -1138,6 +1138,13 @@
*/
//#define EXTENDED_CAPABILITIES_REPORT
/**
* Double-click the Encoder button on the Status Screen for Z Babystepping.
*/
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: You may need to add extra time to mitigate controller latency.
/**
* Volumetric extrusion default state
* Activate to make volumetric extrusion the default method,

7
Marlin/example_configurations/K8400/Configuration_adv.h

@ -1125,6 +1125,13 @@
*/
//#define EXTENDED_CAPABILITIES_REPORT
/**
* Double-click the Encoder button on the Status Screen for Z Babystepping.
*/
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: You may need to add extra time to mitigate controller latency.
/**
* Volumetric extrusion default state
* Activate to make volumetric extrusion the default method,

7
Marlin/example_configurations/RigidBot/Configuration_adv.h

@ -1125,6 +1125,13 @@
*/
//#define EXTENDED_CAPABILITIES_REPORT
/**
* Double-click the Encoder button on the Status Screen for Z Babystepping.
*/
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: You may need to add extra time to mitigate controller latency.
/**
* Volumetric extrusion default state
* Activate to make volumetric extrusion the default method,

7
Marlin/example_configurations/SCARA/Configuration_adv.h

@ -1125,6 +1125,13 @@
*/
//#define EXTENDED_CAPABILITIES_REPORT
/**
* Double-click the Encoder button on the Status Screen for Z Babystepping.
*/
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: You may need to add extra time to mitigate controller latency.
/**
* Volumetric extrusion default state
* Activate to make volumetric extrusion the default method,

7
Marlin/example_configurations/TAZ4/Configuration_adv.h

@ -1133,6 +1133,13 @@
*/
//#define EXTENDED_CAPABILITIES_REPORT
/**
* Double-click the Encoder button on the Status Screen for Z Babystepping.
*/
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: You may need to add extra time to mitigate controller latency.
/**
* Volumetric extrusion default state
* Activate to make volumetric extrusion the default method,

7
Marlin/example_configurations/WITBOX/Configuration_adv.h

@ -1125,6 +1125,13 @@
*/
//#define EXTENDED_CAPABILITIES_REPORT
/**
* Double-click the Encoder button on the Status Screen for Z Babystepping.
*/
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: You may need to add extra time to mitigate controller latency.
/**
* Volumetric extrusion default state
* Activate to make volumetric extrusion the default method,

7
Marlin/example_configurations/delta/generic/Configuration_adv.h

@ -1127,6 +1127,13 @@
*/
//#define EXTENDED_CAPABILITIES_REPORT
/**
* Double-click the Encoder button on the Status Screen for Z Babystepping.
*/
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: You may need to add extra time to mitigate controller latency.
/**
* Volumetric extrusion default state
* Activate to make volumetric extrusion the default method,

7
Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h

@ -1127,6 +1127,13 @@
*/
//#define EXTENDED_CAPABILITIES_REPORT
/**
* Double-click the Encoder button on the Status Screen for Z Babystepping.
*/
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: You may need to add extra time to mitigate controller latency.
/**
* Volumetric extrusion default state
* Activate to make volumetric extrusion the default method,

7
Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h

@ -1132,6 +1132,13 @@
*/
//#define EXTENDED_CAPABILITIES_REPORT
/**
* Double-click the Encoder button on the Status Screen for Z Babystepping.
*/
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: You may need to add extra time to mitigate controller latency.
/**
* Volumetric extrusion default state
* Activate to make volumetric extrusion the default method,

7
Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h

@ -1127,6 +1127,13 @@
*/
//#define EXTENDED_CAPABILITIES_REPORT
/**
* Double-click the Encoder button on the Status Screen for Z Babystepping.
*/
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: You may need to add extra time to mitigate controller latency.
/**
* Volumetric extrusion default state
* Activate to make volumetric extrusion the default method,

7
Marlin/example_configurations/makibox/Configuration_adv.h

@ -1125,6 +1125,13 @@
*/
//#define EXTENDED_CAPABILITIES_REPORT
/**
* Double-click the Encoder button on the Status Screen for Z Babystepping.
*/
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: You may need to add extra time to mitigate controller latency.
/**
* Volumetric extrusion default state
* Activate to make volumetric extrusion the default method,

7
Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h

@ -1125,6 +1125,13 @@
*/
//#define EXTENDED_CAPABILITIES_REPORT
/**
* Double-click the Encoder button on the Status Screen for Z Babystepping.
*/
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: You may need to add extra time to mitigate controller latency.
/**
* Volumetric extrusion default state
* Activate to make volumetric extrusion the default method,

27
Marlin/ultralcd.cpp

@ -51,7 +51,6 @@ int lcd_preheat_hotend_temp[2], lcd_preheat_bed_temp[2], lcd_preheat_fan_speed[2
#if ENABLED(BABYSTEPPING)
long babysteps_done = 0;
millis_t status_screen_click_time = 0;
static void lcd_babystep_z();
#endif
@ -417,22 +416,20 @@ uint16_t max_display_update_time = 0;
* General function to go directly to a screen
*/
void lcd_goto_screen(screenFunc_t screen, const uint32_t encoder = 0) {
#ifdef DOUBLE_CLICK_JUMPS_TO_Z_BABYSTEPPING
#if ENABLED(BABYSTEPPING)
if (currentScreen==lcd_status_screen && screen==lcd_main_menu) // We are in leaving the status screen to goto the main_menu
status_screen_click_time = millis(); // screen. Mark the time so we know how quick the user is
// pressing buttons.
if (currentScreen==lcd_main_menu) {
if ( screen==lcd_status_screen && status_screen_click_time+DOUBLE_CLICK_TIME_WINDOW>millis() ) {
lcdDrawUpdate = LCDVIEW_CLEAR_CALL_REDRAW;
status_screen_click_time = 0;
lcd_babystep_z();
return;
}
if (currentScreen != screen) {
#if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) && ENABLED(BABYSTEPPING)
static millis_t doubleclick_expire_ms = 0;
// Going to lcd_main_menu from status screen? Remember first click time.
// Going back to status screen within a very short time? Go to Z babystepping.
if (screen == lcd_main_menu) {
if (currentScreen == lcd_status_screen)
doubleclick_expire_ms = millis() + DOUBLECLICK_MAX_INTERVAL;
}
else if (screen == lcd_status_screen && currentScreen == lcd_main_menu && PENDING(millis(), doubleclick_expire_ms))
screen = lcd_babystep_z;
#endif
#endif
if (currentScreen != screen) {
currentScreen = screen;
encoderPosition = encoder;
if (screen == lcd_status_screen) {

Loading…
Cancel
Save