Updated FolgerTech i3-2020 config

Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h

@@ -138,7 +138,7 @@
 
 // Optional custom name for your RepStrap or other custom machine
 // Displayed in the LCD "Ready" message
-#define CUSTOM_MACHINE_NAME "FT-2020 v4"
+#define CUSTOM_MACHINE_NAME "FT-2020 v5"
 
 // Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
 // You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
@@ -555,7 +555,7 @@
  * Override with M203
  *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
-#define DEFAULT_MAX_FEEDRATE          { 250, 250, 4, 17 }
+#define DEFAULT_MAX_FEEDRATE          { 250, 250, 6, 17 }
 
 /**
  * Default Max Acceleration (change/s) change = mm/s
@@ -563,7 +563,7 @@
  * Override with M201
  *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
-#define DEFAULT_MAX_ACCELERATION      { 1000, 1000, 4, 750 }
+#define DEFAULT_MAX_ACCELERATION      { 1000, 1000, 10, 750 }
 
 /**
  * Default Acceleration (change/s) change = mm/s
@@ -587,7 +587,7 @@
  */
 #define DEFAULT_XJERK                  8.5
 #define DEFAULT_YJERK                  8.5
-#define DEFAULT_ZJERK                  0.75
+#define DEFAULT_ZJERK                  0.3
 #define DEFAULT_EJERK                  4.0
 
 //===========================================================================
@@ -734,8 +734,8 @@
  * Example: `M851 Z-5` with a CLEARANCE of 4  =>  9mm from bed to nozzle.
  *     But: `M851 Z+1` with a CLEARANCE of 2  =>  2mm from bed to nozzle.
  */
-#define Z_CLEARANCE_DEPLOY_PROBE    3 // Z Clearance for Deploy/Stow
+#define Z_CLEARANCE_DEPLOY_PROBE    5 // Z Clearance for Deploy/Stow
-#define Z_CLEARANCE_BETWEEN_PROBES  3 // Z Clearance between probe points
+#define Z_CLEARANCE_BETWEEN_PROBES  5 // Z Clearance between probe points
 
 // For M851 give a range for adjusting the Z probe offset
 #define Z_PROBE_OFFSET_RANGE_MIN -20
@@ -806,8 +806,8 @@
 #define X_MIN_POS 6
 #define Y_MIN_POS 3
 #define Z_MIN_POS 0
-#define X_MAX_POS 207
+#define X_MAX_POS 212
-#define Y_MAX_POS 182
+#define Y_MAX_POS 190
 #define Z_MAX_POS 175
 
 /**
@@ -981,7 +981,7 @@
 
   //#define MESH_EDIT_GFX_OVERLAY   // Display a graphics overlay while editing the mesh
 
-  #define MESH_INSET 1              // Mesh inset margin on print area
+  #define MESH_INSET 0              // Mesh inset margin on print area
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y 10
 
@@ -1189,7 +1189,7 @@
   // Specify a park position as { X, Y, Z }
   #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
   #define NOZZLE_PARK_XY_FEEDRATE 100   // X and Y axes feedrate in mm/s (also used for delta printers Z axis)
-  #define NOZZLE_PARK_Z_FEEDRATE 5      // Z axis feedrate in mm/s (not used for delta printers)
+  #define NOZZLE_PARK_Z_FEEDRATE 8      // Z axis feedrate in mm/s (not used for delta printers)
 #endif
 
 /**