Обновлено

Marlin/Configuration.h

@@ -681,13 +681,13 @@
  */
 #define X_DRIVER_TYPE  TMC2208_STANDALONE
 #define Y_DRIVER_TYPE  TMC2208_STANDALONE
-#define Z_DRIVER_TYPE  TMC2208_STANDALONE
+#define Z_DRIVER_TYPE  A4988
 //#define X2_DRIVER_TYPE A4988
 //#define Y2_DRIVER_TYPE A4988
 //#define Z2_DRIVER_TYPE A4988
 //#define Z3_DRIVER_TYPE A4988
 //#define Z4_DRIVER_TYPE A4988
-#define E0_DRIVER_TYPE TMC2209_STANDALONE
+#define E0_DRIVER_TYPE A4988
 //#define E1_DRIVER_TYPE A4988
 //#define E2_DRIVER_TYPE A4988
 //#define E3_DRIVER_TYPE A4988
@@ -863,7 +863,7 @@
  *      - normally-closed switches to GND and D32.
  *      - normally-open switches to 5V and D32.
  */
-#define Z_MIN_PROBE_PIN BL_TOUCH_Z_PIN // Pin 32 is the RAMPS default
+//#define Z_MIN_PROBE_PIN BL_TOUCH_Z_PIN // Pin 32 is the RAMPS default
 
 /**
  * Probe Type
@@ -1041,7 +1041,7 @@
 #define Z_PROBE_OFFSET_RANGE_MAX 20
 
 // Enable the M48 repeatability test to test probe accuracy
-#define Z_MIN_PROBE_REPEATABILITY_TEST
+//#define Z_MIN_PROBE_REPEATABILITY_TEST
 
 // Before deploy/stow pause for user confirmation
 //#define PAUSE_BEFORE_DEPLOY_STOW
@@ -1087,9 +1087,9 @@
 
 // @section machine
 
-#define ALL_DRV_2208
+//#define ALL_DRV_2208
 //#define FB_4S_STOCK
-//#define FB_5_STOCK
+#define FB_5_STOCK
 
 #ifdef ALL_DRV_2208
 #define USR_E0_DIR true
@@ -1197,9 +1197,9 @@
  * RAMPS-based boards use SERVO3_PIN for the first runout sensor.
  * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc.
  */
-//#define FILAMENT_RUNOUT_SENSOR
+#define FILAMENT_RUNOUT_SENSOR
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500.
+  #define FIL_RUNOUT_ENABLED_DEFAULT false // Enable the sensor on startup. Override with M412 followed by M500.
   #define NUM_RUNOUT_SENSORS   1          // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each.
   #define FIL_RUNOUT_STATE     HIGH        // Pin state indicating that filament is NOT present.
   //#define FIL_RUNOUT_PULLUP               // Use internal pullup for filament runout pins.
@@ -1369,7 +1369,7 @@
  * Add a bed leveling sub-menu for ABL or MBL.
  * Include a guided procedure if manual probing is enabled.
  */
-#define LCD_BED_LEVELING
+//#define LCD_BED_LEVELING
 
 #if ENABLED(LCD_BED_LEVELING)
   #define MESH_EDIT_Z_STEP  0.025 // (mm) Step size while manually probing Z axis.

Marlin/Configuration_adv.h

@@ -405,8 +405,8 @@
  *
  * Define one or both of these to override the default 0-255 range.
  */
-//#define FAN_MIN_PWM 50
-//#define FAN_MAX_PWM 128
+#define FAN_MIN_PWM 64
+#define FAN_MAX_PWM 255
 
 /**
  * FAST PWM FAN Settings
@@ -769,7 +769,7 @@
 //
 // Add the G35 command to read bed corners to help adjust screws. Requires a bed probe.
 //
-#define ASSISTED_TRAMMING
+//#define ASSISTED_TRAMMING
 #if ENABLED(ASSISTED_TRAMMING)
   // Define positions for probing points, use the hotend as reference not the sensor.
   #define TRAMMING_POINT_XY { {  20, 20 }, { 200,  20 }, { 200, 200 }, { 20, 200 } }
@@ -1095,7 +1095,7 @@
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
 // Add an 'M73' G-code to set the current percentage
-//#define LCD_SET_PROGRESS_MANUALLY
+#define LCD_SET_PROGRESS_MANUALLY
 
 // Show the E position (filament used) during printing
 //#define LCD_SHOW_E_TOTAL
@@ -1162,7 +1162,7 @@
    * an option on the LCD screen to continue the print from the last-known
    * point in the file.
    */
-  //#define POWER_LOSS_RECOVERY
+  #define POWER_LOSS_RECOVERY
   #if ENABLED(POWER_LOSS_RECOVERY)
     #define PLR_ENABLED_DEFAULT   false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500)
     //#define BACKUP_POWER_SUPPLY       // Backup power / UPS to move the steppers on power loss
@@ -1484,7 +1484,7 @@
 
   // UTF8 processing and rendering.
   // Unsupported characters are shown as '?'.
-  //#define TOUCH_UI_USE_UTF8
+  #define TOUCH_UI_USE_UTF8
   #if ENABLED(TOUCH_UI_USE_UTF8)
     // Western accents support. These accented characters use
     // combined bitmaps and require relatively little storage.
@@ -1509,8 +1509,8 @@
   #define TOUCH_UI_FIT_TEXT
 
   // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE)
-  //#define LCD_LANGUAGE_1 en
-  //#define LCD_LANGUAGE_2 fr
+  #define LCD_LANGUAGE_1 en
+  #define LCD_LANGUAGE_2 ru
   //#define LCD_LANGUAGE_3 de
   //#define LCD_LANGUAGE_4 es
   //#define LCD_LANGUAGE_5 it
@@ -1953,21 +1953,21 @@
  *
  * Note that M207 / M208 / M209 settings are saved to EEPROM.
  */
-//#define FWRETRACT
+#define FWRETRACT
 #if ENABLED(FWRETRACT)
-  #define FWRETRACT_AUTORETRACT           // Override slicer retractions
+  //#define FWRETRACT_AUTORETRACT           // Override slicer retractions
   #if ENABLED(FWRETRACT_AUTORETRACT)
     #define MIN_AUTORETRACT 0.1           // (mm) Don't convert E moves under this length
     #define MAX_AUTORETRACT 10.0          // (mm) Don't convert E moves over this length
   #endif
-  #define RETRACT_LENGTH 3                // (mm) Default retract length (positive value)
-  #define RETRACT_LENGTH_SWAP 13          // (mm) Default swap retract length (positive value)
-  #define RETRACT_FEEDRATE 45             // (mm/s) Default feedrate for retracting
-  #define RETRACT_ZRAISE 0                // (mm) Default retract Z-raise
+  #define RETRACT_LENGTH 0.8                // (mm) Default retract length (positive value)
+  #define RETRACT_LENGTH_SWAP 16          // (mm) Default swap retract length (positive value)
+  #define RETRACT_FEEDRATE 30             // (mm/s) Default feedrate for retracting
+  #define RETRACT_ZRAISE 0.2                // (mm) Default retract Z-raise
   #define RETRACT_RECOVER_LENGTH 0        // (mm) Default additional recover length (added to retract length on recover)
   #define RETRACT_RECOVER_LENGTH_SWAP 0   // (mm) Default additional swap recover length (added to retract length on recover from toolchange)
-  #define RETRACT_RECOVER_FEEDRATE 8      // (mm/s) Default feedrate for recovering from retraction
-  #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction
+  #define RETRACT_RECOVER_FEEDRATE 30      // (mm/s) Default feedrate for recovering from retraction
+  #define RETRACT_RECOVER_FEEDRATE_SWAP 30 // (mm/s) Default feedrate for recovering from swap retraction
   #if ENABLED(MIXING_EXTRUDER)
     //#define RETRACT_SYNC_MIXING         // Retract and restore all mixing steppers simultaneously
   #endif