Cleanup extruder runout configs

9 years ago · f84d85f761
17 changed files with 51 additions and 51 deletions
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@ -147,9 +147,9 @@
 //if the machine is idle, and the temperature over MINTEMP, every couple of SECONDS some filament is extruded
 //#define EXTRUDER_RUNOUT_PREVENT
 #define EXTRUDER_RUNOUT_MINTEMP 190
-#define EXTRUDER_RUNOUT_SECONDS 30.
-#define EXTRUDER_RUNOUT_ESTEPS 14. //mm filament
-#define EXTRUDER_RUNOUT_SPEED 1500.  //extrusion speed
+#define EXTRUDER_RUNOUT_SECONDS 30
+#define EXTRUDER_RUNOUT_ESTEPS 14   // mm filament
+#define EXTRUDER_RUNOUT_SPEED 1500  // extrusion speed
 #define EXTRUDER_RUNOUT_EXTRUDE 100

 // @section temperature
--- a/Marlin/example_configurations/Cartesio/Configuration_adv.h
+++ b/Marlin/example_configurations/Cartesio/Configuration_adv.h
@ -147,9 +147,9 @@
 //if the machine is idle, and the temperature over MINTEMP, every couple of SECONDS some filament is extruded
 //#define EXTRUDER_RUNOUT_PREVENT
 #define EXTRUDER_RUNOUT_MINTEMP 190
-#define EXTRUDER_RUNOUT_SECONDS 30.
-#define EXTRUDER_RUNOUT_ESTEPS 14. //mm filament
-#define EXTRUDER_RUNOUT_SPEED 1500.  //extrusion speed
+#define EXTRUDER_RUNOUT_SECONDS 30
+#define EXTRUDER_RUNOUT_ESTEPS 14   // mm filament
+#define EXTRUDER_RUNOUT_SPEED 1500  // extrusion speed
 #define EXTRUDER_RUNOUT_EXTRUDE 100

 // @section temperature
--- a/Marlin/example_configurations/Felix/Configuration_adv.h
+++ b/Marlin/example_configurations/Felix/Configuration_adv.h
@ -147,9 +147,9 @@
 //if the machine is idle, and the temperature over MINTEMP, every couple of SECONDS some filament is extruded
 //#define EXTRUDER_RUNOUT_PREVENT
 #define EXTRUDER_RUNOUT_MINTEMP 190
-#define EXTRUDER_RUNOUT_SECONDS 30.
-#define EXTRUDER_RUNOUT_ESTEPS 14. //mm filament
-#define EXTRUDER_RUNOUT_SPEED 1500.  //extrusion speed
+#define EXTRUDER_RUNOUT_SECONDS 30
+#define EXTRUDER_RUNOUT_ESTEPS 14   // mm filament
+#define EXTRUDER_RUNOUT_SPEED 1500  // extrusion speed
 #define EXTRUDER_RUNOUT_EXTRUDE 100

 // @section temperature
--- a/Marlin/example_configurations/Hephestos/Configuration_adv.h
+++ b/Marlin/example_configurations/Hephestos/Configuration_adv.h
@ -147,9 +147,9 @@
 //if the machine is idle, and the temperature over MINTEMP, every couple of SECONDS some filament is extruded
 //#define EXTRUDER_RUNOUT_PREVENT
 #define EXTRUDER_RUNOUT_MINTEMP 190
-#define EXTRUDER_RUNOUT_SECONDS 30.
-#define EXTRUDER_RUNOUT_ESTEPS 14. //mm filament
-#define EXTRUDER_RUNOUT_SPEED 1500.  //extrusion speed
+#define EXTRUDER_RUNOUT_SECONDS 30
+#define EXTRUDER_RUNOUT_ESTEPS 14   // mm filament
+#define EXTRUDER_RUNOUT_SPEED 1500  // extrusion speed
 #define EXTRUDER_RUNOUT_EXTRUDE 100

 // @section temperature
--- a/Marlin/example_configurations/Hephestos_2/Configuration_adv.h
+++ b/Marlin/example_configurations/Hephestos_2/Configuration_adv.h
@ -147,9 +147,9 @@
 //if the machine is idle, and the temperature over MINTEMP, every couple of SECONDS some filament is extruded
 //#define EXTRUDER_RUNOUT_PREVENT
 #define EXTRUDER_RUNOUT_MINTEMP 190
-#define EXTRUDER_RUNOUT_SECONDS 30.
-#define EXTRUDER_RUNOUT_ESTEPS 14. //mm filament
-#define EXTRUDER_RUNOUT_SPEED 1500.  //extrusion speed
+#define EXTRUDER_RUNOUT_SECONDS 30
+#define EXTRUDER_RUNOUT_ESTEPS 14   // mm filament
+#define EXTRUDER_RUNOUT_SPEED 1500  // extrusion speed
 #define EXTRUDER_RUNOUT_EXTRUDE 100

 // @section temperature
--- a/Marlin/example_configurations/K8200/Configuration_adv.h
+++ b/Marlin/example_configurations/K8200/Configuration_adv.h
@ -153,9 +153,9 @@
 //if the machine is idle, and the temperature over MINTEMP, every couple of SECONDS some filament is extruded
 //#define EXTRUDER_RUNOUT_PREVENT
 #define EXTRUDER_RUNOUT_MINTEMP 190
-#define EXTRUDER_RUNOUT_SECONDS 30.
-#define EXTRUDER_RUNOUT_ESTEPS 14. //mm filament
-#define EXTRUDER_RUNOUT_SPEED 1500.  //extrusion speed
+#define EXTRUDER_RUNOUT_SECONDS 30
+#define EXTRUDER_RUNOUT_ESTEPS 14   // mm filament
+#define EXTRUDER_RUNOUT_SPEED 1500  // extrusion speed
 #define EXTRUDER_RUNOUT_EXTRUDE 100

 // @section temperature
--- a/Marlin/example_configurations/RigidBot/Configuration_adv.h
+++ b/Marlin/example_configurations/RigidBot/Configuration_adv.h
@ -147,9 +147,9 @@
 //if the machine is idle, and the temperature over MINTEMP, every couple of SECONDS some filament is extruded
 //#define EXTRUDER_RUNOUT_PREVENT
 #define EXTRUDER_RUNOUT_MINTEMP 190
-#define EXTRUDER_RUNOUT_SECONDS 30.
-#define EXTRUDER_RUNOUT_ESTEPS 14. //mm filament
-#define EXTRUDER_RUNOUT_SPEED 1500.  //extrusion speed
+#define EXTRUDER_RUNOUT_SECONDS 30
+#define EXTRUDER_RUNOUT_ESTEPS 14   // mm filament
+#define EXTRUDER_RUNOUT_SPEED 1500  // extrusion speed
 #define EXTRUDER_RUNOUT_EXTRUDE 100

 // @section temperature
--- a/Marlin/example_configurations/SCARA/Configuration_adv.h
+++ b/Marlin/example_configurations/SCARA/Configuration_adv.h
@ -147,9 +147,9 @@
 //if the machine is idle, and the temperature over MINTEMP, every couple of SECONDS some filament is extruded
 //#define EXTRUDER_RUNOUT_PREVENT
 #define EXTRUDER_RUNOUT_MINTEMP 180
-#define EXTRUDER_RUNOUT_SECONDS 30.
-#define EXTRUDER_RUNOUT_ESTEPS 14. //mm filament
-#define EXTRUDER_RUNOUT_SPEED 180.  //extrusion speed
+#define EXTRUDER_RUNOUT_SECONDS 30
+#define EXTRUDER_RUNOUT_ESTEPS 14   // mm filament
+#define EXTRUDER_RUNOUT_SPEED 180   // extrusion speed
 #define EXTRUDER_RUNOUT_EXTRUDE 100

 // @section temperature
--- a/Marlin/example_configurations/TAZ4/Configuration_adv.h
+++ b/Marlin/example_configurations/TAZ4/Configuration_adv.h
@ -147,9 +147,9 @@
 //if the machine is idle, and the temperature over MINTEMP, every couple of SECONDS some filament is extruded
 //#define EXTRUDER_RUNOUT_PREVENT
 #define EXTRUDER_RUNOUT_MINTEMP 190
-#define EXTRUDER_RUNOUT_SECONDS 30.
-#define EXTRUDER_RUNOUT_ESTEPS 14. //mm filament
-#define EXTRUDER_RUNOUT_SPEED 1500.  //extrusion speed
+#define EXTRUDER_RUNOUT_SECONDS 30
+#define EXTRUDER_RUNOUT_ESTEPS 14   // mm filament
+#define EXTRUDER_RUNOUT_SPEED 1500  // extrusion speed
 #define EXTRUDER_RUNOUT_EXTRUDE 100

 // @section temperature
--- a/Marlin/example_configurations/WITBOX/Configuration_adv.h
+++ b/Marlin/example_configurations/WITBOX/Configuration_adv.h
@ -147,9 +147,9 @@
 //if the machine is idle, and the temperature over MINTEMP, every couple of SECONDS some filament is extruded
 //#define EXTRUDER_RUNOUT_PREVENT
 #define EXTRUDER_RUNOUT_MINTEMP 190
-#define EXTRUDER_RUNOUT_SECONDS 30.
-#define EXTRUDER_RUNOUT_ESTEPS 14. //mm filament
-#define EXTRUDER_RUNOUT_SPEED 1500.  //extrusion speed
+#define EXTRUDER_RUNOUT_SECONDS 30
+#define EXTRUDER_RUNOUT_ESTEPS 14   // mm filament
+#define EXTRUDER_RUNOUT_SPEED 1500  // extrusion speed
 #define EXTRUDER_RUNOUT_EXTRUDE 100

 // @section temperature
--- a/Marlin/example_configurations/delta/biv2.5/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/biv2.5/Configuration_adv.h
@ -147,9 +147,9 @@
 //if the machine is idle, and the temperature over MINTEMP, every couple of SECONDS some filament is extruded
 //#define EXTRUDER_RUNOUT_PREVENT
 #define EXTRUDER_RUNOUT_MINTEMP 190
-#define EXTRUDER_RUNOUT_SECONDS 30.
-#define EXTRUDER_RUNOUT_ESTEPS 14. //mm filament
-#define EXTRUDER_RUNOUT_SPEED 1500.  //extrusion speed
+#define EXTRUDER_RUNOUT_SECONDS 30
+#define EXTRUDER_RUNOUT_ESTEPS 14   // mm filament
+#define EXTRUDER_RUNOUT_SPEED 1500  // extrusion speed
 #define EXTRUDER_RUNOUT_EXTRUDE 100

 // @section temperature
--- a/Marlin/example_configurations/delta/generic/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/generic/Configuration_adv.h
@ -147,9 +147,9 @@
 //if the machine is idle, and the temperature over MINTEMP, every couple of SECONDS some filament is extruded
 //#define EXTRUDER_RUNOUT_PREVENT
 #define EXTRUDER_RUNOUT_MINTEMP 190
-#define EXTRUDER_RUNOUT_SECONDS 30.
-#define EXTRUDER_RUNOUT_ESTEPS 14. //mm filament
-#define EXTRUDER_RUNOUT_SPEED 1500.  //extrusion speed
+#define EXTRUDER_RUNOUT_SECONDS 30
+#define EXTRUDER_RUNOUT_ESTEPS 14   // mm filament
+#define EXTRUDER_RUNOUT_SPEED 1500  // extrusion speed
 #define EXTRUDER_RUNOUT_EXTRUDE 100

 // @section temperature
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
@ -147,9 +147,9 @@
 //if the machine is idle, and the temperature over MINTEMP, every couple of SECONDS some filament is extruded
 //#define EXTRUDER_RUNOUT_PREVENT
 #define EXTRUDER_RUNOUT_MINTEMP 190
-#define EXTRUDER_RUNOUT_SECONDS 30.
-#define EXTRUDER_RUNOUT_ESTEPS 14. //mm filament
-#define EXTRUDER_RUNOUT_SPEED 1500.  //extrusion speed
+#define EXTRUDER_RUNOUT_SECONDS 30
+#define EXTRUDER_RUNOUT_ESTEPS 14   // mm filament
+#define EXTRUDER_RUNOUT_SPEED 1500  // extrusion speed
 #define EXTRUDER_RUNOUT_EXTRUDE 100

 // @section temperature
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
@ -152,9 +152,9 @@
 //if the machine is idle, and the temperature over MINTEMP, every couple of SECONDS some filament is extruded
 //#define EXTRUDER_RUNOUT_PREVENT
 #define EXTRUDER_RUNOUT_MINTEMP 190
-#define EXTRUDER_RUNOUT_SECONDS 30.
-#define EXTRUDER_RUNOUT_ESTEPS 14. //mm filament
-#define EXTRUDER_RUNOUT_SPEED 1500.  //extrusion speed
+#define EXTRUDER_RUNOUT_SECONDS 30
+#define EXTRUDER_RUNOUT_ESTEPS 14   // mm filament
+#define EXTRUDER_RUNOUT_SPEED 1500  // extrusion speed
 #define EXTRUDER_RUNOUT_EXTRUDE 100

 // @section temperature
--- a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
@ -147,9 +147,9 @@
 //if the machine is idle, and the temperature over MINTEMP, every couple of SECONDS some filament is extruded
 //#define EXTRUDER_RUNOUT_PREVENT
 #define EXTRUDER_RUNOUT_MINTEMP 190
-#define EXTRUDER_RUNOUT_SECONDS 30.
-#define EXTRUDER_RUNOUT_ESTEPS 14. //mm filament
-#define EXTRUDER_RUNOUT_SPEED 1500.  //extrusion speed
+#define EXTRUDER_RUNOUT_SECONDS 30
+#define EXTRUDER_RUNOUT_ESTEPS 14   // mm filament
+#define EXTRUDER_RUNOUT_SPEED 1500  // extrusion speed
 #define EXTRUDER_RUNOUT_EXTRUDE 100

 // @section temperature
--- a/Marlin/example_configurations/makibox/Configuration_adv.h
+++ b/Marlin/example_configurations/makibox/Configuration_adv.h
@ -147,9 +147,9 @@
 //if the machine is idle, and the temperature over MINTEMP, every couple of SECONDS some filament is extruded
 //#define EXTRUDER_RUNOUT_PREVENT
 #define EXTRUDER_RUNOUT_MINTEMP 190
-#define EXTRUDER_RUNOUT_SECONDS 30.
-#define EXTRUDER_RUNOUT_ESTEPS 14. //mm filament
-#define EXTRUDER_RUNOUT_SPEED 1500.  //extrusion speed
+#define EXTRUDER_RUNOUT_SECONDS 30
+#define EXTRUDER_RUNOUT_ESTEPS 14   // mm filament
+#define EXTRUDER_RUNOUT_SPEED 1500  // extrusion speed
 #define EXTRUDER_RUNOUT_EXTRUDE 100

 // @section temperature
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
@ -147,9 +147,9 @@
 //if the machine is idle, and the temperature over MINTEMP, every couple of SECONDS some filament is extruded
 //#define EXTRUDER_RUNOUT_PREVENT
 #define EXTRUDER_RUNOUT_MINTEMP 190
-#define EXTRUDER_RUNOUT_SECONDS 30.
-#define EXTRUDER_RUNOUT_ESTEPS 14. //mm filament
-#define EXTRUDER_RUNOUT_SPEED 1500.  //extrusion speed
+#define EXTRUDER_RUNOUT_SECONDS 30
+#define EXTRUDER_RUNOUT_ESTEPS 14   // mm filament
+#define EXTRUDER_RUNOUT_SPEED 1500  // extrusion speed
 #define EXTRUDER_RUNOUT_EXTRUDE 100

 // @section temperature