Browse Source

Make POSITION macros global

pull/1/head
Scott Lahteine 8 years ago
parent
commit
f75b0c2ee1
  1. 20
      Marlin/Marlin.h
  2. 66
      Marlin/Marlin_main.cpp

20
Marlin/Marlin.h

@ -292,14 +292,26 @@ extern bool volumetric_enabled;
extern int extruder_multiplier[EXTRUDERS]; // sets extrude multiply factor (in percent) for each extruder individually
extern float filament_size[EXTRUDERS]; // cross-sectional area of filament (in millimeters), typically around 1.75 or 2.85, 0 disables the volumetric calculations for the extruder.
extern float volumetric_multiplier[EXTRUDERS]; // reciprocal of cross-sectional area of filament (in square millimeters), stored this way to reduce computational burden in planner
extern float current_position[NUM_AXIS];
extern float home_offset[3]; // axis[n].home_offset
extern float sw_endstop_min[3]; // axis[n].sw_endstop_min
extern float sw_endstop_max[3]; // axis[n].sw_endstop_max
extern bool axis_known_position[3]; // axis[n].is_known
extern bool axis_homed[3]; // axis[n].is_homed
extern volatile bool wait_for_heatup;
extern float current_position[NUM_AXIS];
extern float position_shift[3];
extern float home_offset[3];
extern float sw_endstop_min[3];
extern float sw_endstop_max[3];
#define LOGICAL_POSITION(POS, AXIS) (POS + home_offset[AXIS] + position_shift[AXIS])
#define RAW_POSITION(POS, AXIS) (POS - home_offset[AXIS] - position_shift[AXIS])
#define LOGICAL_X_POSITION(POS) LOGICAL_POSITION(POS, X_AXIS)
#define LOGICAL_Y_POSITION(POS) LOGICAL_POSITION(POS, Y_AXIS)
#define LOGICAL_Z_POSITION(POS) LOGICAL_POSITION(POS, Z_AXIS)
#define RAW_X_POSITION(POS) RAW_POSITION(POS, X_AXIS)
#define RAW_Y_POSITION(POS) RAW_POSITION(POS, Y_AXIS)
#define RAW_Z_POSITION(POS) RAW_POSITION(POS, Z_AXIS)
#define RAW_CURRENT_POSITION(AXIS) RAW_POSITION(current_position[AXIS], AXIS)
// GCode support for external objects
bool code_seen(char);
int code_value_int();

66
Marlin/Marlin_main.cpp

@ -331,10 +331,6 @@ float position_shift[3] = { 0 };
// Set by M206, M428, or menu item. Saved to EEPROM.
float home_offset[3] = { 0 };
#define LOGICAL_POSITION(POS, AXIS) (POS + home_offset[AXIS] + position_shift[AXIS])
#define RAW_POSITION(POS, AXIS) (POS - home_offset[AXIS] - position_shift[AXIS])
#define RAW_CURRENT_POSITION(AXIS) (RAW_POSITION(current_position[AXIS], AXIS))
// Software Endstops. Default to configured limits.
float sw_endstop_min[3] = { X_MIN_POS, Y_MIN_POS, Z_MIN_POS };
float sw_endstop_max[3] = { X_MAX_POS, Y_MAX_POS, Z_MAX_POS };
@ -1408,7 +1404,7 @@ XYZ_CONSTS_FROM_CONFIG(signed char, home_dir, HOME_DIR);
static float x_home_pos(int extruder) {
if (extruder == 0)
return LOGICAL_POSITION(base_home_pos(X_AXIS), X_AXIS);
return LOGICAL_X_POSITION(base_home_pos(X_AXIS));
else
/**
* In dual carriage mode the extruder offset provides an override of the
@ -1513,7 +1509,7 @@ static void set_axis_is_at_home(AxisEnum axis) {
if (active_extruder != 0)
current_position[X_AXIS] = x_home_pos(active_extruder);
else
current_position[X_AXIS] = LOGICAL_POSITION(base_home_pos(X_AXIS), X_AXIS);
current_position[X_AXIS] = LOGICAL_X_POSITION(base_home_pos(X_AXIS));
update_software_endstops(X_AXIS);
return;
}
@ -1803,7 +1799,7 @@ static void clean_up_after_endstop_or_probe_move() {
SERIAL_ECHOLNPGM(")");
}
#endif
float z_dest = LOGICAL_POSITION(z_raise, Z_AXIS);
float z_dest = LOGICAL_Z_POSITION(z_raise);
if (zprobe_zoffset < 0)
z_dest -= zprobe_zoffset;
@ -2964,7 +2960,7 @@ inline void gcode_G28() {
if (home_all_axis || homeX || homeY) {
// Raise Z before homing any other axes and z is not already high enough (never lower z)
destination[Z_AXIS] = LOGICAL_POSITION(MIN_Z_HEIGHT_FOR_HOMING, Z_AXIS);
destination[Z_AXIS] = LOGICAL_Z_POSITION(MIN_Z_HEIGHT_FOR_HOMING);
if (destination[Z_AXIS] > current_position[Z_AXIS]) {
#if ENABLED(DEBUG_LEVELING_FEATURE)
@ -3218,12 +3214,12 @@ inline void gcode_G28() {
;
line_to_current_position();
current_position[X_AXIS] = LOGICAL_POSITION(x, X_AXIS);
current_position[Y_AXIS] = LOGICAL_POSITION(y, Y_AXIS);
current_position[X_AXIS] = LOGICAL_X_POSITION(x);
current_position[Y_AXIS] = LOGICAL_Y_POSITION(y);
line_to_current_position();
#if Z_RAISE_BETWEEN_PROBINGS > 0 || MIN_Z_HEIGHT_FOR_HOMING > 0
current_position[Z_AXIS] = LOGICAL_POSITION(MESH_HOME_SEARCH_Z, Z_AXIS);
current_position[Z_AXIS] = LOGICAL_Z_POSITION(MESH_HOME_SEARCH_Z);
line_to_current_position();
#endif
@ -3641,14 +3637,14 @@ inline void gcode_G28() {
#endif
// Probe at 3 arbitrary points
float z_at_pt_1 = probe_pt( LOGICAL_POSITION(ABL_PROBE_PT_1_X, X_AXIS),
LOGICAL_POSITION(ABL_PROBE_PT_1_Y, Y_AXIS),
float z_at_pt_1 = probe_pt( LOGICAL_X_POSITION(ABL_PROBE_PT_1_X, X_AXIS),
LOGICAL_Y_POSITION(ABL_PROBE_PT_1_Y, Y_AXIS),
stow_probe_after_each, verbose_level),
z_at_pt_2 = probe_pt( LOGICAL_POSITION(ABL_PROBE_PT_2_X, X_AXIS),
LOGICAL_POSITION(ABL_PROBE_PT_2_Y, Y_AXIS),
z_at_pt_2 = probe_pt( LOGICAL_X_POSITION(ABL_PROBE_PT_2_X, X_AXIS),
LOGICAL_Y_POSITION(ABL_PROBE_PT_2_Y, Y_AXIS),
stow_probe_after_each, verbose_level),
z_at_pt_3 = probe_pt( LOGICAL_POSITION(ABL_PROBE_PT_3_X, X_AXIS),
LOGICAL_POSITION(ABL_PROBE_PT_3_Y, Y_AXIS),
z_at_pt_3 = probe_pt( LOGICAL_X_POSITION(ABL_PROBE_PT_3_X, X_AXIS),
LOGICAL_Y_POSITION(ABL_PROBE_PT_3_Y, Y_AXIS),
stow_probe_after_each, verbose_level);
if (!dryrun) set_bed_level_equation_3pts(z_at_pt_1, z_at_pt_2, z_at_pt_3);
@ -7748,9 +7744,9 @@ void clamp_to_software_endstops(float target[3]) {
void inverse_kinematics(const float in_cartesian[3]) {
const float cartesian[3] = {
RAW_POSITION(in_cartesian[X_AXIS], X_AXIS),
RAW_POSITION(in_cartesian[Y_AXIS], Y_AXIS),
RAW_POSITION(in_cartesian[Z_AXIS], Z_AXIS)
RAW_X_POSITION(in_cartesian[X_AXIS]),
RAW_Y_POSITION(in_cartesian[Y_AXIS]),
RAW_Z_POSITION(in_cartesian[Z_AXIS])
};
delta[TOWER_1] = sqrt(delta_diagonal_rod_2_tower_1
@ -7778,13 +7774,13 @@ void clamp_to_software_endstops(float target[3]) {
float delta_safe_distance_from_top() {
float cartesian[3] = {
LOGICAL_POSITION(0, X_AXIS),
LOGICAL_POSITION(0, Y_AXIS),
LOGICAL_POSITION(0, Z_AXIS)
LOGICAL_X_POSITION(0),
LOGICAL_Y_POSITION(0),
LOGICAL_Z_POSITION(0)
};
inverse_kinematics(cartesian);
float distance = delta[TOWER_3];
cartesian[Y_AXIS] = LOGICAL_POSITION(DELTA_PRINTABLE_RADIUS, Y_AXIS);
cartesian[Y_AXIS] = LOGICAL_Y_POSITION(DELTA_PRINTABLE_RADIUS);
inverse_kinematics(cartesian);
return abs(distance - delta[TOWER_3]);
}
@ -7876,8 +7872,8 @@ void clamp_to_software_endstops(float target[3]) {
int half = (AUTO_BED_LEVELING_GRID_POINTS - 1) / 2;
float h1 = 0.001 - half, h2 = half - 0.001,
grid_x = max(h1, min(h2, RAW_POSITION(cartesian[X_AXIS], X_AXIS) / delta_grid_spacing[0])),
grid_y = max(h1, min(h2, RAW_POSITION(cartesian[Y_AXIS], Y_AXIS) / delta_grid_spacing[1]));
grid_x = max(h1, min(h2, RAW_X_POSITION(cartesian[X_AXIS]) / delta_grid_spacing[0])),
grid_y = max(h1, min(h2, RAW_Y_POSITION(cartesian[Y_AXIS]) / delta_grid_spacing[1]));
int floor_x = floor(grid_x), floor_y = floor(grid_y);
float ratio_x = grid_x - floor_x, ratio_y = grid_y - floor_y,
z1 = bed_level[floor_x + half][floor_y + half],
@ -7918,9 +7914,9 @@ void set_current_from_steppers_for_axis(AxisEnum axis) {
current_position[axis] = LOGICAL_POSITION(cartesian_position[axis], axis);
#elif ENABLED(AUTO_BED_LEVELING_FEATURE)
vector_3 pos = planner.adjusted_position();
current_position[axis] = LOGICAL_POSITION(axis == X_AXIS ? pos.x : axis == Y_AXIS ? pos.y : pos.z, axis);
current_position[axis] = axis == X_AXIS ? pos.x : axis == Y_AXIS ? pos.y : pos.z;
#else
current_position[axis] = LOGICAL_POSITION(stepper.get_axis_position_mm(axis), axis); // CORE handled transparently
current_position[axis] = stepper.get_axis_position_mm(axis); // CORE handled transparently
#endif
}
@ -7930,8 +7926,8 @@ void set_current_from_steppers_for_axis(AxisEnum axis) {
void mesh_line_to_destination(float fr_mm_m, uint8_t x_splits = 0xff, uint8_t y_splits = 0xff) {
int cx1 = mbl.cell_index_x(RAW_CURRENT_POSITION(X_AXIS)),
cy1 = mbl.cell_index_y(RAW_CURRENT_POSITION(Y_AXIS)),
cx2 = mbl.cell_index_x(RAW_POSITION(destination[X_AXIS], X_AXIS)),
cy2 = mbl.cell_index_y(RAW_POSITION(destination[Y_AXIS], Y_AXIS));
cx2 = mbl.cell_index_x(RAW_X_POSITION(destination[X_AXIS])),
cy2 = mbl.cell_index_y(RAW_Y_POSITION(destination[Y_AXIS]));
NOMORE(cx1, MESH_NUM_X_POINTS - 2);
NOMORE(cy1, MESH_NUM_Y_POINTS - 2);
NOMORE(cx2, MESH_NUM_X_POINTS - 2);
@ -7952,14 +7948,14 @@ void mesh_line_to_destination(float fr_mm_m, uint8_t x_splits = 0xff, uint8_t y_
int8_t gcx = max(cx1, cx2), gcy = max(cy1, cy2);
if (cx2 != cx1 && TEST(x_splits, gcx)) {
memcpy(end, destination, sizeof(end));
destination[X_AXIS] = LOGICAL_POSITION(mbl.get_probe_x(gcx), X_AXIS);
destination[X_AXIS] = LOGICAL_X_POSITION(mbl.get_probe_x(gcx));
normalized_dist = (destination[X_AXIS] - current_position[X_AXIS]) / (end[X_AXIS] - current_position[X_AXIS]);
destination[Y_AXIS] = MBL_SEGMENT_END(Y);
CBI(x_splits, gcx);
}
else if (cy2 != cy1 && TEST(y_splits, gcy)) {
memcpy(end, destination, sizeof(end));
destination[Y_AXIS] = LOGICAL_POSITION(mbl.get_probe_y(gcy), Y_AXIS);
destination[Y_AXIS] = LOGICAL_Y_POSITION(mbl.get_probe_y(gcy));
normalized_dist = (destination[Y_AXIS] - current_position[Y_AXIS]) / (end[Y_AXIS] - current_position[Y_AXIS]);
destination[X_AXIS] = MBL_SEGMENT_END(X);
CBI(y_splits, gcy);
@ -8374,8 +8370,8 @@ void prepare_move_to_destination() {
float SCARA_pos[2];
static float SCARA_C2, SCARA_S2, SCARA_K1, SCARA_K2, SCARA_theta, SCARA_psi;
SCARA_pos[X_AXIS] = RAW_POSITION(cartesian[X_AXIS], X_AXIS) * axis_scaling[X_AXIS] - SCARA_offset_x; //Translate SCARA to standard X Y
SCARA_pos[Y_AXIS] = RAW_POSITION(cartesian[Y_AXIS], Y_AXIS) * axis_scaling[Y_AXIS] - SCARA_offset_y; // With scaling factor.
SCARA_pos[X_AXIS] = RAW_X_POSITION(cartesian[X_AXIS]) * axis_scaling[X_AXIS] - SCARA_offset_x; //Translate SCARA to standard X Y
SCARA_pos[Y_AXIS] = RAW_Y_POSITION(cartesian[Y_AXIS]) * axis_scaling[Y_AXIS] - SCARA_offset_y; // With scaling factor.
#if (Linkage_1 == Linkage_2)
SCARA_C2 = ((sq(SCARA_pos[X_AXIS]) + sq(SCARA_pos[Y_AXIS])) / (2 * (float)L1_2)) - 1;
@ -8393,7 +8389,7 @@ void prepare_move_to_destination() {
delta[X_AXIS] = SCARA_theta * SCARA_RAD2DEG; // Multiply by 180/Pi - theta is support arm angle
delta[Y_AXIS] = (SCARA_theta + SCARA_psi) * SCARA_RAD2DEG; // - equal to sub arm angle (inverted motor)
delta[Z_AXIS] = RAW_POSITION(cartesian[Z_AXIS], Z_AXIS);
delta[Z_AXIS] = RAW_Z_POSITION(cartesian[Z_AXIS]);
/**
SERIAL_ECHOPGM("cartesian x="); SERIAL_ECHO(cartesian[X_AXIS]);

Loading…
Cancel
Save