Browse Source

🌐 Update Slovak language (#24397)

FB4S_WIFI
Roman Moravčík 2 years ago
committed by Scott Lahteine
parent
commit
f5bdb8b4d2
  1. 92
      Marlin/src/lcd/language/language_sk.h

92
Marlin/src/lcd/language/language_sk.h

@ -50,7 +50,10 @@ namespace Language_sk {
LSTR WELCOME_MSG = MACHINE_NAME _UxGT(" pripravená.");
LSTR MSG_YES = _UxGT("ÁNO");
LSTR MSG_NO = _UxGT("NIE");
LSTR MSG_HIGH = _UxGT("VYSOKÁ");
LSTR MSG_LOW = _UxGT("NÍZKA");
LSTR MSG_BACK = _UxGT("Naspäť");
LSTR MSG_ERROR = _UxGT("Chyba");
LSTR MSG_MEDIA_ABORTING = _UxGT("Ruším...");
LSTR MSG_MEDIA_INSERTED = _UxGT("Karta vložená");
LSTR MSG_MEDIA_REMOVED = _UxGT("Karta vybraná");
@ -64,6 +67,8 @@ namespace Language_sk {
LSTR MSG_LCD_SOFT_ENDSTOPS = _UxGT("Soft. endstopy");
LSTR MSG_MAIN = _UxGT("Hlavná ponuka");
LSTR MSG_ADVANCED_SETTINGS = _UxGT("Pokročilé nastav.");
LSTR MSG_TOOLBAR_SETUP = _UxGT("Panel nástrojov");
LSTR MSG_OPTION_DISABLED = _UxGT("Možnosť vypnutá");
LSTR MSG_CONFIGURATION = _UxGT("Konfigurácia");
LSTR MSG_RUN_AUTO_FILES = _UxGT("Auto-štart");
LSTR MSG_DISABLE_STEPPERS = _UxGT("Uvolniť motory");
@ -77,6 +82,7 @@ namespace Language_sk {
LSTR MSG_AUTO_HOME_Z = _UxGT("Domov os Z");
LSTR MSG_FILAMENT_SET = _UxGT("Nastav. filamentu");
LSTR MSG_FILAMENT_MAN = _UxGT("Správa filamentu");
LSTR MSG_MANUAL_LEVELING = _UxGT("Ručné rovnanie");
LSTR MSG_LEVBED_FL = _UxGT("Ľavý predný");
LSTR MSG_LEVBED_FR = _UxGT("Pravý predný");
LSTR MSG_LEVBED_C = _UxGT("Stred");
@ -109,7 +115,14 @@ namespace Language_sk {
LSTR MSG_PREHEAT_1_ALL = _UxGT("Zahriať ") PREHEAT_1_LABEL _UxGT(" všetko");
LSTR MSG_PREHEAT_1_BEDONLY = _UxGT("Zahriať ") PREHEAT_1_LABEL _UxGT(" podlož");
LSTR MSG_PREHEAT_1_SETTINGS = _UxGT("Zahriať ") PREHEAT_1_LABEL _UxGT(" nast.");
#ifdef PREHEAT_2_LABEL
LSTR MSG_PREHEAT_2 = _UxGT("Zahriať ") PREHEAT_2_LABEL;
LSTR MSG_PREHEAT_2_SETTINGS = _UxGT("Zahriať ") PREHEAT_2_LABEL _UxGT(" nast.");
#endif
#ifdef PREHEAT_3_LABEL
LSTR MSG_PREHEAT_3 = _UxGT("Zahriať ") PREHEAT_3_LABEL;
LSTR MSG_PREHEAT_3_SETTINGS = _UxGT("Zahriať ") PREHEAT_3_LABEL _UxGT(" nast.");
#endif
LSTR MSG_PREHEAT_M = _UxGT("Zahriať $");
LSTR MSG_PREHEAT_M_H = _UxGT("Zahriať $ ~");
LSTR MSG_PREHEAT_M_END = _UxGT("Zahriať $ hotend");
@ -144,7 +157,8 @@ namespace Language_sk {
LSTR MSG_BED_LEVELING = _UxGT("Vyrovnanie podložky");
LSTR MSG_LEVEL_BED = _UxGT("Vyrovnať podložku");
LSTR MSG_BED_TRAMMING = _UxGT("Vyrovnať rohy");
LSTR MSG_BED_TRAMMING_RAISE = _UxGT("Zdvyhnite podl., kým sa nezopne sonda");
LSTR MSG_BED_TRAMMING_MANUAL = _UxGT("Ručné vyrovnanie");
LSTR MSG_BED_TRAMMING_RAISE = _UxGT("Zdvihnite podl., kým sa nezopne sonda");
LSTR MSG_BED_TRAMMING_IN_RANGE = _UxGT("Rohy sú vrámci odchyl. Vyrovnajte podl.");
LSTR MSG_BED_TRAMMING_GOOD_POINTS = _UxGT("Dobré body: ");
LSTR MSG_BED_TRAMMING_LAST_Z = _UxGT("Posl. Z: ");
@ -155,10 +169,19 @@ namespace Language_sk {
LSTR MSG_MESH_VIEW = _UxGT("Zobraz. sieť bodov");
LSTR MSG_EDITING_STOPPED = _UxGT("Koniec úprav siete");
LSTR MSG_NO_VALID_MESH = _UxGT("Neplatná sieť bodov");
LSTR MSG_ACTIVATE_MESH = _UxGT("Zapnúť vyrovnanie");
LSTR MSG_PROBING_POINT = _UxGT("Skúšam bod");
LSTR MSG_MESH_X = _UxGT("Index X");
LSTR MSG_MESH_Y = _UxGT("Index Y");
LSTR MSG_MESH_INSET = _UxGT("Vložiť sieť");
LSTR MSG_MESH_MIN_X = _UxGT("Min. X sieťe");
LSTR MSG_MESH_MAX_X = _UxGT("Max. X sieťe");
LSTR MSG_MESH_MIN_Y = _UxGT("Min. Y sieťe");
LSTR MSG_MESH_MAX_Y = _UxGT("Max. Y sieťe");
LSTR MSG_MESH_AMAX = _UxGT("Maximál. oblasť");
LSTR MSG_MESH_CENTER = _UxGT("Stredová oblasť");
LSTR MSG_MESH_EDIT_Z = _UxGT("Hodnota Z");
LSTR MSG_MESH_CANCEL = _UxGT("Mriežka zrušená");
LSTR MSG_CUSTOM_COMMANDS = _UxGT("Vlastné príkazy");
LSTR MSG_M48_TEST = _UxGT("M48 Test sondy");
LSTR MSG_M48_POINT = _UxGT("M48 Bod");
@ -177,6 +200,9 @@ namespace Language_sk {
LSTR MSG_UBL_TOOLS = _UxGT("Nástroje UBL");
LSTR MSG_UBL_LEVEL_BED = _UxGT("UBL rovnanie");
LSTR MSG_LCD_TILTING_MESH = _UxGT("Vyrovnávam bod");
LSTR MSG_UBL_TILT_MESH = _UxGT("Nakloniť sieť");
LSTR MSG_UBL_TILTING_GRID = _UxGT("Veľkosť nakl. siete");
LSTR MSG_UBL_MESH_TILTED = _UxGT("Sieť naklonená");
LSTR MSG_UBL_MANUAL_MESH = _UxGT("Manuálna sieť bodov");
LSTR MSG_UBL_MESH_WIZARD = _UxGT("Spriev. UBL rovnan.");
LSTR MSG_UBL_BC_INSERT = _UxGT("Položte a zmerajte");
@ -225,6 +251,7 @@ namespace Language_sk {
LSTR MSG_UBL_MANUAL_FILLIN = _UxGT("Ručné vyplnenie");
LSTR MSG_UBL_SMART_FILLIN = _UxGT("Chytré vyplnenie");
LSTR MSG_UBL_FILLIN_MESH = _UxGT("Vyplniť mriežku");
LSTR MSG_UBL_MESH_FILLED = _UxGT("Doplnené chýb. body");
LSTR MSG_UBL_INVALIDATE_ALL = _UxGT("Zrušiť všetko");
LSTR MSG_UBL_INVALIDATE_CLOSEST = _UxGT("Zrušiť najbližší");
LSTR MSG_UBL_FINE_TUNE_ALL = _UxGT("Upraviť všetky");
@ -233,6 +260,7 @@ namespace Language_sk {
LSTR MSG_UBL_STORAGE_SLOT = _UxGT("Pamäťový slot");
LSTR MSG_UBL_LOAD_MESH = _UxGT("Načítať sieť bodov");
LSTR MSG_UBL_SAVE_MESH = _UxGT("Uložiť sieť bodov");
LSTR MSG_UBL_INVALID_SLOT = _UxGT("Najskôr zvol. slot siete");
LSTR MSG_MESH_LOADED = _UxGT("Sieť %i načítaná");
LSTR MSG_MESH_SAVED = _UxGT("Sieť %i uložená");
LSTR MSG_UBL_NO_STORAGE = _UxGT("Nedostatok miesta");
@ -325,9 +353,21 @@ namespace Language_sk {
LSTR MSG_PID_AUTOTUNE_E = _UxGT("Kalibrácia PID *");
LSTR MSG_PID_CYCLE = _UxGT("Cykly PID");
LSTR MSG_PID_AUTOTUNE_DONE = _UxGT("Kal. PID dokončená");
LSTR MSG_PID_AUTOTUNE_FAILED = _UxGT("Kal. PID zlyhala!");
LSTR MSG_BAD_EXTRUDER_NUM = _UxGT("Zlý extrudér");
LSTR MSG_TEMP_TOO_HIGH = _UxGT("Príliš vysoká tepl.");
LSTR MSG_TIMEOUT = _UxGT("Čas vypršal.");
LSTR MSG_PID_BAD_EXTRUDER_NUM = _UxGT("Auto-kal. zlyhala! Zlý extrúder.");
LSTR MSG_PID_TEMP_TOO_HIGH = _UxGT("Auto-kal. zlyhala! Príliš vysoká tepl.");
LSTR MSG_PID_TIMEOUT = _UxGT("Auto-kal. zlyhala! Čas vypršal.");
LSTR MSG_MPC_MEASURING_AMBIENT = _UxGT("Test. tepl. straty");
LSTR MSG_MPC_AUTOTUNE = _UxGT("Auto-kal. MPC");
LSTR MSG_MPC_EDIT = _UxGT("Upraviť * MPC");
LSTR MSG_MPC_POWER_E = _UxGT("Výkon *");
LSTR MSG_MPC_BLOCK_HEAT_CAPACITY_E = _UxGT("Blokovať C *");
LSTR MSG_SENSOR_RESPONSIVENESS_E = _UxGT("Rozliš. senz. *");
LSTR MSG_MPC_AMBIENT_XFER_COEFF_E = _UxGT("H okolia *");
LSTR MSG_MPC_AMBIENT_XFER_COEFF_FAN_E = _UxGT("H vent. okolia *");
LSTR MSG_SELECT = _UxGT("Vybrať");
LSTR MSG_SELECT_E = _UxGT("Vybrať *");
LSTR MSG_ACC = _UxGT("Zrýchlenie");
@ -379,6 +419,9 @@ namespace Language_sk {
LSTR MSG_ADVANCE_K_E = _UxGT("K pre posun *");
LSTR MSG_CONTRAST = _UxGT("Kontrast LCD");
LSTR MSG_BRIGHTNESS = _UxGT("Jas LCD");
LSTR MSG_LCD_TIMEOUT_SEC = _UxGT("Čas. limit LCD (s)");
LSTR MSG_SCREEN_TIMEOUT = _UxGT("Čas. limit LCD (m)");
LSTR MSG_BRIGHTNESS_OFF = _UxGT("Podsviet. vyp.");
LSTR MSG_STORE_EEPROM = _UxGT("Uložiť nastavenie");
LSTR MSG_LOAD_EEPROM = _UxGT("Načítať nastavenie");
LSTR MSG_RESTORE_DEFAULTS = _UxGT("Obnoviť nastavenie");
@ -391,6 +434,10 @@ namespace Language_sk {
LSTR MSG_RESET_PRINTER = _UxGT("Reštart. tlačiar.");
LSTR MSG_REFRESH = LCD_STR_REFRESH _UxGT("Obnoviť");
LSTR MSG_INFO_SCREEN = _UxGT("Info. obrazovka");
LSTR MSG_INFO_MACHINENAME = _UxGT("Názov stroja");
LSTR MSG_INFO_SIZE = _UxGT("Rozmer");
LSTR MSG_INFO_FWVERSION = _UxGT("Verzia firmvéru");
LSTR MSG_INFO_BUILD = _UxGT("Čas zostavenia");
LSTR MSG_PREPARE = _UxGT("Príprava tlače");
LSTR MSG_TUNE = _UxGT("Doladenie tlače");
LSTR MSG_POWER_MONITOR = _UxGT("Monitor napájania");
@ -405,6 +452,8 @@ namespace Language_sk {
LSTR MSG_BUTTON_RESET = _UxGT("Vynulovať");
LSTR MSG_BUTTON_IGNORE = _UxGT("Ignorovať");
LSTR MSG_BUTTON_CANCEL = _UxGT("Zrušiť");
LSTR MSG_BUTTON_CONFIRM = _UxGT("Potvrdiť");
LSTR MSG_BUTTON_CONTINUE = _UxGT("Pokračovať");
LSTR MSG_BUTTON_DONE = _UxGT("Hotovo");
LSTR MSG_BUTTON_BACK = _UxGT("Naspäť");
LSTR MSG_BUTTON_PROCEED = _UxGT("Pokračovať");
@ -414,6 +463,8 @@ namespace Language_sk {
LSTR MSG_BUTTON_PAUSE = _UxGT("Pauza");
LSTR MSG_BUTTON_RESUME = _UxGT("Obnoviť");
LSTR MSG_BUTTON_ADVANCED = _UxGT("Pokročilé");
LSTR MSG_BUTTON_SAVE = _UxGT("Uložiť");
LSTR MSG_BUTTON_PURGE = _UxGT("Vytlačiť");
LSTR MSG_PAUSING = _UxGT("Pozastavujem...");
LSTR MSG_PAUSE_PRINT = _UxGT("Pozastaviť tlač");
LSTR MSG_ADVANCED_PAUSE = _UxGT("Pokročil. pauza");
@ -433,11 +484,15 @@ namespace Language_sk {
LSTR MSG_PRINT_PAUSED = _UxGT("Tlač pozastavená");
LSTR MSG_PRINTING = _UxGT("Tlačím...");
LSTR MSG_STOPPING = _UxGT("Zastavujem...");
LSTR MSG_REMAINING_TIME = _UxGT("Zostávajúci");
LSTR MSG_PRINT_ABORTED = _UxGT("Tlač zrušená");
LSTR MSG_PRINT_DONE = _UxGT("Tlač dokončená");
LSTR MSG_PRINTER_KILLED = _UxGT("Tlačiareň zastavená!");
LSTR MSG_TURN_OFF = _UxGT("Vypnite tlačiareň");
LSTR MSG_NO_MOVE = _UxGT("Žiadny pohyb.");
LSTR MSG_KILLED = _UxGT("PRERUŠENÉ. ");
LSTR MSG_STOPPED = _UxGT("ZASTAVENÉ. ");
LSTR MSG_FWRETRACT = _UxGT("Firmv. retrakcia");
LSTR MSG_CONTROL_RETRACT = _UxGT("Retrakt mm");
LSTR MSG_CONTROL_RETRACT_SWAP = _UxGT("Výmena Re.mm");
LSTR MSG_CONTROL_RETRACTF = _UxGT("Retraktovať V");
@ -503,6 +558,9 @@ namespace Language_sk {
LSTR MSG_ZPROBE_XOFFSET = _UxGT("X ofset");
LSTR MSG_ZPROBE_YOFFSET = _UxGT("Y ofset");
LSTR MSG_ZPROBE_ZOFFSET = _UxGT("Z ofset");
LSTR MSG_ZPROBE_MARGIN = _UxGT("Hranica sondy");
LSTR MSG_Z_FEED_RATE = _UxGT("Rýchl. posunu Z");
LSTR MSG_ENABLE_HS_MODE = _UxGT("Povoliť rež. HS");
LSTR MSG_MOVE_NOZZLE_TO_BED = _UxGT("Pos. trysku k podl.");
LSTR MSG_BABYSTEP_X = _UxGT("Babystep X");
LSTR MSG_BABYSTEP_Y = _UxGT("Babystep Y");
@ -566,30 +624,32 @@ namespace Language_sk {
LSTR MSG_CASE_LIGHT_BRIGHTNESS = _UxGT("Jas svetla");
LSTR MSG_KILL_EXPECTED_PRINTER = _UxGT("Nesprávna tlačiareň");
LSTR MSG_COLORS_GET = _UxGT("Zvoliť farbu");
LSTR MSG_COLORS_SELECT = _UxGT("Zvoliť farby");
LSTR MSG_COLORS_APPLIED = _UxGT("Farby aplikované");
LSTR MSG_COLORS_RED = _UxGT("Červená");
LSTR MSG_COLORS_GREEN = _UxGT("Zelená");
LSTR MSG_COLORS_BLUE = _UxGT("Modrá");
LSTR MSG_COLORS_WHITE = _UxGT("Biela");
LSTR MSG_UI_LANGUAGE = _UxGT("Jazyk rozhrania");
LSTR MSG_SOUND_ENABLE = _UxGT("Povoliť zvuky");
LSTR MSG_LOCKSCREEN = _UxGT("Uzamknúť obrazovku");
LSTR MSG_LOCKSCREEN_LOCKED = _UxGT("Tlačiareň je uzamknutá,");
LSTR MSG_LOCKSCREEN_UNLOCK = _UxGT("potiahnite pre odomknutie.");
LSTR MSG_PLEASE_WAIT_REBOOT = _UxGT("Prosím čakajte do reštartu.");
#if LCD_WIDTH >= 20 || HAS_DWIN_E3V2
LSTR MSG_MEDIA_NOT_INSERTED = _UxGT("Nie je vložená karta.");
LSTR MSG_REMAINING_TIME = _UxGT("Zostávajúci čas");
LSTR MSG_PLEASE_WAIT_REBOOT = _UxGT("Prosím čakajte do reštartu. ");
LSTR MSG_PLEASE_PREHEAT = _UxGT("Prosím zahrejte hotend.");
LSTR MSG_INFO_PRINT_COUNT_RESET = _UxGT("Vynulovať počítadlo");
LSTR MSG_INFO_PRINT_COUNT = _UxGT("Počet tlačí");
LSTR MSG_INFO_PRINT_TIME = _UxGT("Celkový čas");
LSTR MSG_INFO_PRINT_LONGEST = _UxGT("Najdlhšia tlač");
LSTR MSG_INFO_PRINT_FILAMENT = _UxGT("Celkom vytlačené");
LSTR MSG_COLORS_GET = _UxGT("Zvoliť farbu");
LSTR MSG_COLORS_SELECT = _UxGT("Zvoliť farby");
LSTR MSG_COLORS_APPLIED = _UxGT("Farby aplikované");
LSTR MSG_COLORS_RED = _UxGT("Červená");
LSTR MSG_COLORS_GREEN = _UxGT("Zelená");
LSTR MSG_COLORS_BLUE = _UxGT("Modrá");
LSTR MSG_UI_LANGUAGE = _UxGT("Jazyk rozhrania");
LSTR MSG_SOUND_ENABLE = _UxGT("Povoliť zvuky");
LSTR MSG_LOCKSCREEN = _UxGT("Uzamknúť obrazovku");
#else
LSTR MSG_MEDIA_NOT_INSERTED = _UxGT("Žiadna karta");
LSTR MSG_PLEASE_PREHEAT = _UxGT("Prosím zahrejte");
LSTR MSG_INFO_PRINT_COUNT = _UxGT("Tlače");
LSTR MSG_REMAINING_TIME = _UxGT("Zostávajúci");
LSTR MSG_INFO_PRINT_TIME = _UxGT("Čas");
LSTR MSG_INFO_PRINT_LONGEST = _UxGT("Najdlhšia");
LSTR MSG_INFO_PRINT_FILAMENT = _UxGT("Vytlačené");
@ -610,10 +670,14 @@ namespace Language_sk {
LSTR MSG_FILAMENT_CHANGE_OPTION_HEADER = _UxGT("MOŽNOSTI POKRAČ.:");
LSTR MSG_FILAMENT_CHANGE_OPTION_PURGE = _UxGT("Vytlačiť viacej");
LSTR MSG_FILAMENT_CHANGE_OPTION_RESUME = _UxGT("Obnoviť tlač");
LSTR MSG_FILAMENT_CHANGE_PURGE_CONTINUE = _UxGT("Vytlač. alebo pokrač.?");
LSTR MSG_FILAMENT_CHANGE_NOZZLE = _UxGT(" Tryska: ");
LSTR MSG_RUNOUT_SENSOR = _UxGT("Senzor filamentu");
LSTR MSG_RUNOUT_DISTANCE_MM = _UxGT("Vzd. mm fil. senz.");
LSTR MSG_RUNOUT_ENABLE = _UxGT("Zapnúť senzor");
LSTR MSG_RUNOUT_ACTIVE = _UxGT("Senz. fil. zapn.");
LSTR MSG_INVERT_EXTRUDER = _UxGT("Invert. extrudér");
LSTR MSG_EXTRUDER_MIN_TEMP = _UxGT("Min. tepl. extrud.");
LSTR MSG_FANCHECK = _UxGT("Kontrola rýchl.");
LSTR MSG_KILL_HOMING_FAILED = _UxGT("Parkovanie zlyhalo");
LSTR MSG_LCD_PROBING_FAILED = _UxGT("Kalibrácia zlyhala");

Loading…
Cancel
Save