Browse Source

Updates to Formbot T-Rex 2+ configuration files (#12422)

Updates to Formbot T-Rex 2+ configuration files
pull/1/head
Roxy-3D 6 years ago
committed by GitHub
parent
commit
f19fd642ce
No known key found for this signature in database GPG Key ID: 4AEE18F83AFDEB23
  1. 56
      Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration.h
  2. 74
      Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
  3. 1
      Marlin/src/config/examples/Formbot/T_Rex_2+/_Bootscreen.h

56
Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration.h

@ -157,6 +157,17 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/** /**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -242,6 +253,9 @@
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
// For the other hotends it is their distance from the extruder 0 hotend. // For the other hotends it is their distance from the extruder 0 hotend.
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
#ifdef ROXYs_TRex #ifdef ROXYs_TRex
#define HOTEND_OFFSET_X {0.0, 0.00} // (mm) for each extruder, offset of the hotend on the X axis #define HOTEND_OFFSET_X {0.0, 0.00} // (mm) for each extruder, offset of the hotend on the X axis
@ -665,7 +679,6 @@
* Override with M92 * Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
*/ */
//#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 160, 1600, 93 }
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 800, 93 } #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 800, 93 }
/** /**
@ -673,7 +686,6 @@
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
*/ */
//#define DEFAULT_MAX_FEEDRATE { 250, 150, 5, 25 }
#define DEFAULT_MAX_FEEDRATE { 250, 100, 5, 25 } #define DEFAULT_MAX_FEEDRATE { 250, 100, 5, 25 }
/** /**
@ -692,11 +704,6 @@
* M204 R Retract Acceleration * M204 R Retract Acceleration
* M204 T Travel Acceleration * M204 T Travel Acceleration
*/ */
//#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves
//#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
//#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
#define DEFAULT_ACCELERATION 1500 // X, Y, Z and E acceleration for printing moves #define DEFAULT_ACCELERATION 1500 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 1500 // E acceleration for retracts #define DEFAULT_RETRACT_ACCELERATION 1500 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 1500 // X, Y, Z acceleration for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 1500 // X, Y, Z acceleration for travel (non printing) moves
@ -709,11 +716,6 @@
* When changing speed and direction, if the difference is less than the * When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously. * value set here, it may happen instantaneously.
*/ */
//#define DEFAULT_XJERK 20.0
//#define DEFAULT_YJERK 10.0
//#define DEFAULT_ZJERK 0.4
//#define DEFAULT_EJERK 5.0
#define DEFAULT_XJERK 12.0 // More conservitive numbers. #define DEFAULT_XJERK 12.0 // More conservitive numbers.
#define DEFAULT_YJERK 8.0 #define DEFAULT_YJERK 8.0
#define DEFAULT_ZJERK 0.4 #define DEFAULT_ZJERK 0.4
@ -801,6 +803,7 @@
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE //#define SOLENOID_PROBE
@ -846,7 +849,7 @@
#define MIN_PROBE_EDGE 0 #define MIN_PROBE_EDGE 0
// X and Y axis travel speed (mm/m) between probes // X and Y axis travel speed (mm/m) between probes
#define XY_PROBE_SPEED 7000 #define XY_PROBE_SPEED 5000
// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) // Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2)
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
@ -876,7 +879,7 @@
#define Z_CLEARANCE_DEPLOY_PROBE 7 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_DEPLOY_PROBE 7 // Z Clearance for Deploy/Stow
#define Z_CLEARANCE_BETWEEN_PROBES 7 // Z Clearance between probe points #define Z_CLEARANCE_BETWEEN_PROBES 7 // Z Clearance between probe points
#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
#define Z_AFTER_PROBING 7 // Z position after probing is done #define Z_AFTER_PROBING 10 // Z position after probing is done
#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
@ -970,11 +973,11 @@
#define Z_MIN_POS 0 #define Z_MIN_POS 0
#define X_MAX_POS 450 #define X_MAX_POS 450
#define Y_MAX_POS Y_BED_SIZE #define Y_MAX_POS Y_BED_SIZE
#if ENABLED(tallVersion) #define Z_MAX_POS 700
#define Z_MAX_POS 700
#else
#define Z_MAX_POS 500 // Z raise distance for tool-change, as needed for some extruders
#endif #define TOOLCHANGE_ZRAISE 2 // (mm)
/** /**
* Software Endstops * Software Endstops
@ -1110,7 +1113,7 @@
#if ENABLED(G26_MESH_VALIDATION) #if ENABLED(G26_MESH_VALIDATION)
#define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
#define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.
#define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. #define MESH_TEST_HOTEND_TEMP 208.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
#define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool.
#endif #endif
@ -1206,9 +1209,9 @@
//#define LCD_BED_LEVELING //#define LCD_BED_LEVELING
#if ENABLED(LCD_BED_LEVELING) #if ENABLED(LCD_BED_LEVELING)
#define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis.
#define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
//#define MESH_EDIT_MENU // Add a menu to edit mesh points //#define MESH_EDIT_MENU // Add a menu to edit mesh points
#endif #endif
// Add a menu item to move between bed corners for manual bed adjustment // Add a menu item to move between bed corners for manual bed adjustment
@ -1249,8 +1252,8 @@
#define Z_SAFE_HOMING #define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
#define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). #define Z_SAFE_HOMING_X_POINT (((X_BED_SIZE) / 2) - 15) // X point for Z homing when homing all axes (G28).
#define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). #define Z_SAFE_HOMING_Y_POINT (((Y_BED_SIZE) / 2) - 15) // Y point for Z homing when homing all axes (G28).
#endif #endif
// Homing speeds (mm/m) // Homing speeds (mm/m)
@ -1260,6 +1263,7 @@
// Validate that endstops are triggered on homing moves // Validate that endstops are triggered on homing moves
#define VALIDATE_HOMING_ENDSTOPS #define VALIDATE_HOMING_ENDSTOPS
// @section calibrate // @section calibrate
/** /**
@ -1484,7 +1488,7 @@
* *
* View the current statistics with M78. * View the current statistics with M78.
*/ */
#define PRINTCOUNTER //#define PRINTCOUNTER
//============================================================================= //=============================================================================
//============================= LCD and SD support ============================ //============================= LCD and SD support ============================

74
Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h

@ -219,7 +219,7 @@
* *
* Define one or both of these to override the default 0-255 range. * Define one or both of these to override the default 0-255 range.
*/ */
#define FAN_MIN_PWM 64 #define FAN_MIN_PWM 45
//#define FAN_MAX_PWM 128 //#define FAN_MAX_PWM 128
// @section extruder // @section extruder
@ -365,12 +365,12 @@
*/ */
#define DUAL_X_CARRIAGE #define DUAL_X_CARRIAGE
#if ENABLED(DUAL_X_CARRIAGE) #if ENABLED(DUAL_X_CARRIAGE)
#define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage
#define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage #define X1_MAX_POS (X_BED_SIZE) // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage
#define X2_MIN_POS 0 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage #define X2_MIN_POS 0 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
#define X2_MAX_POS (442-4.0) // set maximum to the distance between toolheads when both heads are homed #define X2_MAX_POS (442-4.0) // set maximum to the distance between toolheads when both heads are homed
#define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position
#define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position
// However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software
// override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops
// without modifying the firmware (through the "M218 T1 X???" command). // without modifying the firmware (through the "M218 T1 X???" command).
@ -433,6 +433,7 @@
#define Z_STEPPER_ALIGN_ACC 0.02 #define Z_STEPPER_ALIGN_ACC 0.02
#endif #endif
// @section machine // @section machine
#define AXIS_RELATIVE_MODES {false, false, false, false} #define AXIS_RELATIVE_MODES {false, false, false, false}
@ -513,6 +514,7 @@
//#define MICROSTEP16 LOW,LOW,HIGH //#define MICROSTEP16 LOW,LOW,HIGH
//#define MICROSTEP32 HIGH,LOW,HIGH //#define MICROSTEP32 HIGH,LOW,HIGH
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] #define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16]
@ -590,7 +592,7 @@
// Add an 'M73' G-code to set the current percentage // Add an 'M73' G-code to set the current percentage
#define LCD_SET_PROGRESS_MANUALLY #define LCD_SET_PROGRESS_MANUALLY
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS #if HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR) #if ENABLED(LCD_PROGRESS_BAR)
#define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar
@ -1061,7 +1063,7 @@
* 'M106 P<fan> T2' : Use the set secondary speed * 'M106 P<fan> T2' : Use the set secondary speed
* 'M106 P<fan> T1' : Restore the previous fan speed * 'M106 P<fan> T1' : Restore the previous fan speed
*/ */
#define EXTRA_FAN_SPEED //#define EXTRA_FAN_SPEED
/** /**
* Firmware-based and LCD-controlled retract * Firmware-based and LCD-controlled retract
@ -1097,34 +1099,6 @@
//#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously
#endif #endif
#endif #endif
/**
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
*/
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
#define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
#endif
/**
* Position to park head during tool change.
* Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
*/
//#define TOOLCHANGE_PARK
#if ENABLED(TOOLCHANGE_PARK)
#define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/** /**
* Advanced Pause * Advanced Pause
* Experimental feature for filament change support and for parking the nozzle when paused. * Experimental feature for filament change support and for parking the nozzle when paused.
@ -1162,19 +1136,19 @@
// until extrusion is consistent, and to purge old filament. // until extrusion is consistent, and to purge old filament.
// Filament Unload does a Retract, Delay, and Purge first: // Filament Unload does a Retract, Delay, and Purge first:
#define FILAMENT_UNLOAD_RETRACT_LENGTH 4 // (mm) Unload initial retract length. #define FILAMENT_UNLOAD_RETRACT_LENGTH 0 // (mm) Unload initial retract length.
#define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract. #define FILAMENT_UNLOAD_DELAY 500 // (ms) Delay for the filament to cool after retract.
#define FILAMENT_UNLOAD_PURGE_LENGTH 0 // (mm) An unretract is done, then this length is purged. #define FILAMENT_UNLOAD_PURGE_LENGTH 0 // (mm) An unretract is done, then this length is purged.
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. #define PAUSE_PARK_NOZZLE_TIMEOUT (3*60) // (seconds) Time limit before the nozzle is turned off for safety.
#define FILAMENT_CHANGE_ALERT_BEEPS 1 // Number of alert beeps to play when a response is needed. #define FILAMENT_CHANGE_ALERT_BEEPS 3 // Number of alert beeps to play when a response is needed.
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.
#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change #define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
#endif #endif
// @section tmc // @section tmc
@ -1694,18 +1668,6 @@
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif #endif
/**
* G-code Macros
*
* Add G-codes M810-M819 to define and run G-code macros.
* Macros are not saved to EEPROM.
*/
//#define GCODE_MACROS
#if ENABLED(GCODE_MACROS)
#define GCODE_MACROS_SLOTS 5 // Up to 10 may be used
#define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro
#endif
/** /**
* User-defined menu items that execute custom GCode * User-defined menu items that execute custom GCode
*/ */
@ -1851,7 +1813,7 @@
#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix #define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix
#define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral)
#define MAX7219_NUMBER_UNITS 2 // Number of Max7219 units in chain. #define MAX7219_NUMBER_UNITS 3 // Number of Max7219 units in chain.
#define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°)
// connector at: right=0 bottom=-90 top=90 left=180 // connector at: right=0 bottom=-90 top=90 left=180
#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order #define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order

1
Marlin/src/config/examples/Formbot/T_Rex_2+/_Bootscreen.h

@ -33,6 +33,7 @@
#define CUSTOM_BOOTSCREEN_TIMEOUT 2500 #define CUSTOM_BOOTSCREEN_TIMEOUT 2500
#define CUSTOM_BOOTSCREEN_BMPWIDTH 128 #define CUSTOM_BOOTSCREEN_BMPWIDTH 128
#define CUSTOM_BOOTSCREEN_BMPHEIGHT 64
const unsigned char custom_start_bmp[] PROGMEM = { const unsigned char custom_start_bmp[] PROGMEM = {
B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111, B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,

Loading…
Cancel
Save