Fix feedrate in gcode_T (max_feedrate is mm/s)

Marlin/Marlin_main.cpp

@@ -6633,11 +6633,13 @@ inline void gcode_T(uint8_t tmp_extruder) {
       if (next_feedrate > 0.0) stored_feedrate = feedrate = next_feedrate;
     }
     else {
+      feedrate =
         #ifdef XY_TRAVEL_SPEED
-        feedrate = XY_TRAVEL_SPEED;
+          XY_TRAVEL_SPEED
         #else
-        feedrate = min(planner.max_feedrate[X_AXIS], planner.max_feedrate[Y_AXIS]);
+          min(planner.max_feedrate[X_AXIS], planner.max_feedrate[Y_AXIS]) * 60
         #endif
+      ;
     }
 
     if (tmp_extruder != active_extruder) {

Marlin/planner.cpp

@@ -80,7 +80,7 @@ block_t Planner::block_buffer[BLOCK_BUFFER_SIZE];
 volatile uint8_t Planner::block_buffer_head = 0;           // Index of the next block to be pushed
 volatile uint8_t Planner::block_buffer_tail = 0;
 
-float Planner::max_feedrate[NUM_AXIS]; // Max speeds in mm per minute
+float Planner::max_feedrate[NUM_AXIS]; // Max speeds in mm per second
 float Planner::axis_steps_per_mm[NUM_AXIS];
 unsigned long Planner::max_acceleration_steps_per_s2[NUM_AXIS];
 unsigned long Planner::max_acceleration_mm_per_s2[NUM_AXIS]; // Use M201 to override by software

Marlin/planner.h

@@ -115,7 +115,7 @@ class Planner {
     static volatile uint8_t block_buffer_head;           // Index of the next block to be pushed
     static volatile uint8_t block_buffer_tail;
 
-    static float max_feedrate[NUM_AXIS]; // Max speeds in mm per minute
+    static float max_feedrate[NUM_AXIS]; // Max speeds in mm per second
     static float axis_steps_per_mm[NUM_AXIS];
     static unsigned long max_acceleration_steps_per_s2[NUM_AXIS];
     static unsigned long max_acceleration_mm_per_s2[NUM_AXIS]; // Use M201 to override by software