Creality 4.5.2 format and fix

Marlin/src/pins/stm32f1/pins_CREALITY_V4.h

@@ -27,7 +27,7 @@
 #if NOT_TARGET(__STM32F1__)
   #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
 #elif HOTENDS > 1 || E_STEPPERS > 1
-  #error "Creality_V4 only supports one hotend / E-stepper. Comment out this line to continue."
+  #error "Creality V4 only supports one hotend / E-stepper. Comment out this line to continue."
 #endif
 
 #ifndef BOARD_INFO_NAME

Marlin/src/pins/stm32f1/pins_CREALITY_V452.h

@@ -33,81 +33,88 @@
 #define BOARD_NAME "Creality v4.5.2"
 #define DEFAULT_MACHINE_NAME "Creality3D"
 
+//
+// Release PB4 (Z_STEP_PIN) from JTAG NRST role
+//
+#define DISABLE_DEBUG
+
 #define BOARD_NO_NATIVE_USB
 
 //
 // EEPROM
 //
 #if NO_EEPROM_SELECTED
-  #define IIC_BL24CXX_EEPROM                    // EEPROM on I2C-0
+  #define IIC_BL24CXX_EEPROM                      // EEPROM on I2C-0
   //#define SDCARD_EEPROM_EMULATION
 #endif
 
 #if ENABLED(IIC_BL24CXX_EEPROM)
-  #define IIC_EEPROM_SDA                  PA11
+  #define IIC_EEPROM_SDA                    PA11
-  #define IIC_EEPROM_SCL                  PA12
+  #define IIC_EEPROM_SCL                    PA12
-  #define MARLIN_EEPROM_SIZE             0x800  // 2Kb (24C16)
+  #define MARLIN_EEPROM_SIZE               0x800  // 2Kb (24C16)
 #elif ENABLED(SDCARD_EEPROM_EMULATION)
-  #define MARLIN_EEPROM_SIZE             0x800  // 2Kb
+  #define MARLIN_EEPROM_SIZE               0x800  // 2Kb
 #endif
 
 //
 // Limit Switches
 //
-#define X_MIN_PIN           PC4
+#define X_STOP_PIN                          PC4
-// #define X_MAX_PIN          PA7
+#define Y_STOP_PIN                          PC5
-#define Y_MIN_PIN           PC5
+#define Z_STOP_PIN                          PA4
-#define Z_MIN_PIN           PA4
+
-#define PROBE_TARE_PIN      PA5
+#define FIL_RUNOUT_PIN                      PA7
 
 //
-// Steppers
+// Probe
 //
-#define X_ENABLE_PIN        PC3
+#define PROBE_TARE_PIN                      PA5
-#define X_STEP_PIN          PB8
+#define PROBE_ENABLE_PIN                    PC6   // Optoswitch to Enable Z Probe
-#define X_DIR_PIN           PB7
-
-#define Y_ENABLE_PIN        PC3
-#define Y_STEP_PIN          PB6
-#define Y_DIR_PIN           PB5
 
-#define Z_ENABLE_PIN        PC3
+//
-#define Z_STEP_PIN          PB4
+// Steppers
-#define Z_DIR_PIN           PB3
+//
+#define X_ENABLE_PIN                        PC3
+#define X_STEP_PIN                          PB8
+#define X_DIR_PIN                           PB7
 
-#define E0_ENABLE_PIN       PC3
+#define Y_ENABLE_PIN                        PC3
-#define E0_STEP_PIN         PC2
+#define Y_STEP_PIN                          PB6
-#define E0_DIR_PIN          PB9
+#define Y_DIR_PIN                           PB5
 
+#define Z_ENABLE_PIN                        PC3
+#define Z_STEP_PIN                          PB4
+#define Z_DIR_PIN                           PB3
 
-//
+#define E0_ENABLE_PIN                       PC3
-// Release PB4 (Z_STEP_PIN) from JTAG NRST role
+#define E0_STEP_PIN                         PC2
-//
+#define E0_DIR_PIN                          PB9
-#define DISABLE_DEBUG
 
 //
 // Temperature Sensors
 //
-#define TEMP_0_PIN         PB1   // TH1
+#define TEMP_0_PIN                          PB1   // TH1
-#define TEMP_BED_PIN       PB0   // TB1
+#define TEMP_BED_PIN                        PB0   // TB1
 
 //
 // Heaters / Fans
+//
+#define HEATER_0_PIN                        PA1   // HEATER1
+#define HEATER_BED_PIN                      PA2   // HOT BED
 
-#define HEATER_0_PIN       PA1   // HEATER1
+#define FAN_PIN                             PA0   // FAN
-#define HEATER_BED_PIN     PA2   // HOT BED
-
-#define FAN_PIN            PA0   // FAN
 #define FAN_SOFT_PWM
 
-/* SD card detect */
+//
-#define SD_DETECT_PIN      PC7
+// SD Card
-#define NO_SD_HOST_DRIVE       // SD is only seen by the printer
+//
-
+#define SD_DETECT_PIN                       PC7
-#define SDIO_SUPPORT           // Extra added by Creality
+#define NO_SD_HOST_DRIVE                          // SD is only seen by the printer
-#define SDIO_CLOCK     6000000 // In original source code overridden by Creality in sdio.h
 
-#define CASE_LIGHT_PIN     PA6
+#define SDIO_SUPPORT                              // Extra added by Creality
+#define SDIO_CLOCK                       6000000  // In original source code overridden by Creality in sdio.h
 
-#define FIL_RUNOUT_PIN     PA7
+//
-#define PROBE_ENABLE_PIN   PC6 // Optoswitch to Enable Z Probe
+// Misc. Functions
+//
+#define CASE_LIGHT_PIN                      PA6