Browse Source

Creality 4.5.2 format and fix

vanilla_fb_2.0.x
Scott Lahteine 4 years ago
committed by Scott Lahteine
parent
commit
ec2843bcf3
  1. 2
      Marlin/src/pins/stm32f1/pins_CREALITY_V4.h
  2. 93
      Marlin/src/pins/stm32f1/pins_CREALITY_V452.h

2
Marlin/src/pins/stm32f1/pins_CREALITY_V4.h

@ -27,7 +27,7 @@
#if NOT_TARGET(__STM32F1__)
#error "Oops! Select an STM32F1 board in 'Tools > Board.'"
#elif HOTENDS > 1 || E_STEPPERS > 1
#error "Creality_V4 only supports one hotend / E-stepper. Comment out this line to continue."
#error "Creality V4 only supports one hotend / E-stepper. Comment out this line to continue."
#endif
#ifndef BOARD_INFO_NAME

93
Marlin/src/pins/stm32f1/pins_CREALITY_V452.h

@ -33,81 +33,88 @@
#define BOARD_NAME "Creality v4.5.2"
#define DEFAULT_MACHINE_NAME "Creality3D"
//
// Release PB4 (Z_STEP_PIN) from JTAG NRST role
//
#define DISABLE_DEBUG
#define BOARD_NO_NATIVE_USB
//
// EEPROM
//
#if NO_EEPROM_SELECTED
#define IIC_BL24CXX_EEPROM // EEPROM on I2C-0
#define IIC_BL24CXX_EEPROM // EEPROM on I2C-0
//#define SDCARD_EEPROM_EMULATION
#endif
#if ENABLED(IIC_BL24CXX_EEPROM)
#define IIC_EEPROM_SDA PA11
#define IIC_EEPROM_SCL PA12
#define MARLIN_EEPROM_SIZE 0x800 // 2Kb (24C16)
#define IIC_EEPROM_SDA PA11
#define IIC_EEPROM_SCL PA12
#define MARLIN_EEPROM_SIZE 0x800 // 2Kb (24C16)
#elif ENABLED(SDCARD_EEPROM_EMULATION)
#define MARLIN_EEPROM_SIZE 0x800 // 2Kb
#define MARLIN_EEPROM_SIZE 0x800 // 2Kb
#endif
//
// Limit Switches
//
#define X_MIN_PIN PC4
// #define X_MAX_PIN PA7
#define Y_MIN_PIN PC5
#define Z_MIN_PIN PA4
#define PROBE_TARE_PIN PA5
#define X_STOP_PIN PC4
#define Y_STOP_PIN PC5
#define Z_STOP_PIN PA4
#define FIL_RUNOUT_PIN PA7
//
// Steppers
// Probe
//
#define X_ENABLE_PIN PC3
#define X_STEP_PIN PB8
#define X_DIR_PIN PB7
#define Y_ENABLE_PIN PC3
#define Y_STEP_PIN PB6
#define Y_DIR_PIN PB5
#define PROBE_TARE_PIN PA5
#define PROBE_ENABLE_PIN PC6 // Optoswitch to Enable Z Probe
#define Z_ENABLE_PIN PC3
#define Z_STEP_PIN PB4
#define Z_DIR_PIN PB3
//
// Steppers
//
#define X_ENABLE_PIN PC3
#define X_STEP_PIN PB8
#define X_DIR_PIN PB7
#define E0_ENABLE_PIN PC3
#define E0_STEP_PIN PC2
#define E0_DIR_PIN PB9
#define Y_ENABLE_PIN PC3
#define Y_STEP_PIN PB6
#define Y_DIR_PIN PB5
#define Z_ENABLE_PIN PC3
#define Z_STEP_PIN PB4
#define Z_DIR_PIN PB3
//
// Release PB4 (Z_STEP_PIN) from JTAG NRST role
//
#define DISABLE_DEBUG
#define E0_ENABLE_PIN PC3
#define E0_STEP_PIN PC2
#define E0_DIR_PIN PB9
//
// Temperature Sensors
//
#define TEMP_0_PIN PB1 // TH1
#define TEMP_BED_PIN PB0 // TB1
#define TEMP_0_PIN PB1 // TH1
#define TEMP_BED_PIN PB0 // TB1
//
// Heaters / Fans
//
#define HEATER_0_PIN PA1 // HEATER1
#define HEATER_BED_PIN PA2 // HOT BED
#define HEATER_0_PIN PA1 // HEATER1
#define HEATER_BED_PIN PA2 // HOT BED
#define FAN_PIN PA0 // FAN
#define FAN_PIN PA0 // FAN
#define FAN_SOFT_PWM
/* SD card detect */
#define SD_DETECT_PIN PC7
#define NO_SD_HOST_DRIVE // SD is only seen by the printer
#define SDIO_SUPPORT // Extra added by Creality
#define SDIO_CLOCK 6000000 // In original source code overridden by Creality in sdio.h
//
// SD Card
//
#define SD_DETECT_PIN PC7
#define NO_SD_HOST_DRIVE // SD is only seen by the printer
#define CASE_LIGHT_PIN PA6
#define SDIO_SUPPORT // Extra added by Creality
#define SDIO_CLOCK 6000000 // In original source code overridden by Creality in sdio.h
#define FIL_RUNOUT_PIN PA7
#define PROBE_ENABLE_PIN PC6 // Optoswitch to Enable Z Probe
//
// Misc. Functions
//
#define CASE_LIGHT_PIN PA6

Loading…
Cancel
Save