Merge pull request #535 from GabinoLopez/patch-1

Update language.h

Marlin/language.h

@@ -695,88 +695,95 @@
 #define WELCOME_MSG MACHINE_NAME "Lista."
 #define MSG_SD_INSERTED "Tarjeta SD Colocada"
 #define MSG_SD_REMOVED "Tarjeta SD Retirada"
-#define MSG_MAIN " Menu Principal \003"
+#define MSG_MAIN "Menu Principal"
 #define MSG_AUTOSTART " Autostart"
 #define MSG_DISABLE_STEPPERS "Apagar Motores"
-#define MSG_AUTO_HOME " Llevar Ejes al Cero"
+#define MSG_AUTO_HOME "Llevar al Origen" // "Llevar Ejes al Cero"
 #define MSG_SET_ORIGIN "Establecer Cero"
-#define MSG_COOLDOWN " Enfriar"
-#define MSG_EXTRUDE " Extruir"
-#define MSG_RETRACT " Retraer"
 #define MSG_PREHEAT_PLA "Precalentar PLA"
 #define MSG_PREHEAT_PLA_SETTINGS "Ajustar temp. PLA"
 #define MSG_PREHEAT_ABS "Precalentar ABS"
 #define MSG_PREHEAT_ABS_SETTINGS "Ajustar temp. ABS"
-#define MSG_MOVE_AXIS " Mover Ejes      \x7E"
-#define MSG_SPEED " Velocidad:"
-#define MSG_NOZZLE " \002Fusor:"
-#define MSG_NOZZLE1 " \002Fusor2:"
-#define MSG_NOZZLE2 " \002Fusor3:"
-#define MSG_BED " \002Base:"
-#define MSG_FAN_SPEED " Ventilador:"
-#define MSG_FLOW " Flujo:"
-#define MSG_CONTROL " Control \003"
-#define MSG_MIN " \002 Min:"
-#define MSG_MAX " \002 Max:"
-#define MSG_FACTOR " \002 Fact:"
-#define MSG_AUTOTEMP " Autotemp:"
+#define MSG_COOLDOWN "Enfriar"
+#define MSG_EXTRUDE "Extruir"
+#define MSG_RETRACT "Retraer"
+#define MSG_MOVE_AXIS "Mover Ejes"
+#define MSG_SPEED "Velocidad"
+#define MSG_NOZZLE "Nozzle"
+#define MSG_NOZZLE1 "Nozzle2"
+#define MSG_NOZZLE2 "Nozzle3"
+#define MSG_BED "Base"
+#define MSG_FAN_SPEED "Ventilador"
+#define MSG_FLOW "Flujo"
+#define MSG_CONTROL "Control"
+#define MSG_MIN "\002 Min"
+#define MSG_MAX "\002 Max"
+#define MSG_FACTOR "\002 Fact"
+#define MSG_AUTOTEMP "Autotemp"
 #define MSG_ON "On"
 #define MSG_OFF "Off"
-#define MSG_PID_P " PID-P: "
-#define MSG_PID_I " PID-I: "
-#define MSG_PID_D " PID-D: "
-#define MSG_PID_C " PID-C: "
-#define MSG_ACC  " Acc:"
-#define MSG_VXY_JERK " Vxy-agit: "
-#define MSG_VZ_JERK "Vz-agit"
-#define MSG_VE_JERK "Ve-agit"
+#define MSG_PID_P "PID-P"
+#define MSG_PID_I "PID-I"
+#define MSG_PID_D "PID-D"
+#define MSG_PID_C "PID-C"
+#define MSG_ACC  "Acel"
+#define MSG_VXY_JERK "Vxy-jerk"
+#define MSG_VZ_JERK "Vz-jerk"
+#define MSG_VE_JERK "Ve-jerk"
 #define MSG_VMAX "Vmax"
-#define MSG_X "x:"
-#define MSG_Y "y:"
-#define MSG_Z "z:"
-#define MSG_E "e:"
-#define MSG_VMIN " Vmin:"
-#define MSG_VTRAV_MIN " VTrav min:"
+#define MSG_X "x"
+#define MSG_Y "y"
+#define MSG_Z "z"
+#define MSG_E "e"
+#define MSG_VMIN "Vmin"
+#define MSG_VTRAV_MIN "VTrav min"
 #define MSG_AMAX "Amax"
-#define MSG_A_RETRACT " A-retrac.:"
-#define MSG_XSTEPS " Xpasos/mm:"
-#define MSG_YSTEPS " Ypasos/mm:"
-#define MSG_ZSTEPS " Zpasos/mm:"
-#define MSG_ESTEPS " Epasos/mm:"
-#define MSG_MAIN_WIDE " Menu Principal  \003"
-#define MSG_RECTRACT_WIDE " Retraer         \x7E"
-#define MSG_TEMPERATURE_WIDE " Temperatura     \x7E"
-#define MSG_TEMPERATURE_RTN  " Temperatura     \003"
-#define MSG_MOTION_WIDE " Movimiento      \x7E"
+#define MSG_A_RETRACT "A-retrac."
+#define MSG_XSTEPS "X pasos/mm"
+#define MSG_YSTEPS "Y pasos/mm"
+#define MSG_ZSTEPS "Z pasos/mm"
+#define MSG_ESTEPS "E pasos/mm"
+#define MSG_RECTRACT "Retraer"
+#define MSG_TEMPERATURE "Temperatura"
+#define MSG_MOTION "Movimiento"
 #define MSG_STORE_EPROM "Guardar Memoria"
 #define MSG_LOAD_EPROM "Cargar Memoria"
 #define MSG_RESTORE_FAILSAFE "Rest. de emergencia"
-#define MSG_REFRESH "\004Volver a cargar"
-#define MSG_WATCH " Monitorizar \003"
-#define MSG_PREPARE " Preparar \x7E"
-#define MSG_PREPARE_ALT " Preparar \003"
-#define MSG_CONTROL_ARROW " Control  \x7E"
-#define MSG_RETRACT_ARROW " Retraer  \x7E"
-#define MSG_TUNE " Ajustar \x7E"
-#define MSG_PAUSE_PRINT " Pausar Impresion \x7E"
-#define MSG_RESUME_PRINT " Reanudar Impresion \x7E"
-#define MSG_STOP_PRINT " Detener Impresion \x7E"
-#define MSG_CARD_MENU " Menu de SD    \x7E"
+#define MSG_REFRESH "Volver a cargar"
+#define MSG_WATCH "Monitorizar"
+#define MSG_PREPARE "Preparar"
+#define MSG_TUNE "Ajustar"
+#define MSG_PAUSE_PRINT "Pausar Impresion"
+#define MSG_RESUME_PRINT "Reanudar Impresion"
+#define MSG_STOP_PRINT "Detener Impresion"
+#define MSG_CARD_MENU "Menu de SD"
 #define MSG_NO_CARD "No hay Tarjeta SD"
 #define MSG_DWELL "Reposo..."
 #define MSG_USERWAIT "Esperando Ordenes..."
+#define MSG_RESUMING "Resumiendo Impresion"
 #define MSG_NO_MOVE "Sin movimiento"
-#define MSG_PART_RELEASE "Desacople Parcial"
 #define MSG_KILLED "PARADA DE EMERGENCIA. "
 #define MSG_STOPPED "PARADA."
-#define MSG_STEPPER_RELEASED "Desacoplada."
-#define MSG_CONTROL_RETRACT  " Retraer mm:"
-#define MSG_CONTROL_RETRACTF " Retraer  F:"
-#define MSG_CONTROL_RETRACT_ZLIFT " Levantar mm:"
-#define MSG_CONTROL_RETRACT_RECOVER " DesRet +mm:"
-#define MSG_CONTROL_RETRACT_RECOVERF " DesRet F:"
-#define MSG_AUTORETRACT " AutoRetr.:"
+#define MSG_CONTROL_RETRACT  "Retraer mm"
+#define MSG_CONTROL_RETRACTF "Retraer  F"
+#define MSG_CONTROL_RETRACT_ZLIFT "Levantar mm"
+#define MSG_CONTROL_RETRACT_RECOVER "DesRet +mm"
+#define MSG_CONTROL_RETRACT_RECOVERF "DesRet F"
+#define MSG_AUTORETRACT "AutoRetr."
 #define MSG_FILAMENTCHANGE "Change filament"
+#define MSG_INIT_SDCARD "Iniciando. Tarjeta-SD"
+#define MSG_CNG_SDCARD "Cambiar Tarjeta-SD"
+#define MSG_RECTRACT_WIDE "Retraer"
+#define MSG_TEMPERATURE_WIDE "Temperatura"
+#define MSG_TEMPERATURE_RTN  "Temperatura"
+#define MSG_MAIN_WIDE "Menu Principal"
+#define MSG_MOTION_WIDE "Movimiento"
+#define MSG_PREPARE_ALT "Preparar"
+#define MSG_CONTROL_ARROW "Control"
+#define MSG_RETRACT_ARROW "Retraer"
+#define MSG_PART_RELEASE "Desacople Parcial"
+#define MSG_STEPPER_RELEASED "Desacoplada."
+
 // Serial Console Messages
 
 #define MSG_Enqueing "En cola \""
@@ -821,11 +828,11 @@
 #define MSG_Y_MIN "y_min: "
 #define MSG_Y_MAX "y_max: "
 #define MSG_Z_MIN "z_min: "
+#define MSG_Z_MAX "z_max: "
 #define MSG_M119_REPORT "Comprobando fines de carrera."
 #define MSG_ENDSTOP_HIT "PULSADO"
 #define MSG_ENDSTOP_OPEN "abierto"
-#define MSG_HOTEND_OFFSET "Despl. Hotend:"
-        
+#define MSG_HOTEND_OFFSET "Hotend offsets:"
 #define MSG_SD_CANT_OPEN_SUBDIR "No se pudo abrir la subcarpeta."
 #define MSG_SD_INIT_FAIL "Fallo al iniciar la SD"
 #define MSG_SD_VOL_INIT_FAIL "Fallo al montar el volumen"