Browse Source

Use pin/port names for CHITU pins

vanilla_fb_2.0.x
Scott Lahteine 5 years ago
committed by Scott Lahteine
parent
commit
e62b52da99
  1. 152
      Marlin/src/pins/stm32f1/pins_CHITU3D.h

152
Marlin/src/pins/stm32f1/pins_CHITU3D.h

@ -86,7 +86,7 @@
// //
#define SDSS -1 #define SDSS -1
#define LED_PIN -1 #define LED_PIN -1
#define CASE_LIGHT_PIN 8 #define CASE_LIGHT_PIN PA8 // 8
#define PS_ON_PIN -1 #define PS_ON_PIN -1
#define KILL_PIN PD6 // LED strip 24v #define KILL_PIN PD6 // LED strip 24v
@ -111,8 +111,8 @@
// //
// Temperature Sensors // Temperature Sensors
// //
#define TEMP_BED_PIN PA0 // Analog Input #define TEMP_BED_PIN PA0 // Analog Input
#define TEMP_0_PIN PA1 // Analog Input #define TEMP_0_PIN PA1 // Analog Input
#define TEMP_1_PIN -1 // Analog Input #define TEMP_1_PIN -1 // Analog Input
#define TEMP_2_PIN -1 // Analog Input #define TEMP_2_PIN -1 // Analog Input
@ -122,9 +122,9 @@
#if HAS_SPI_LCD #if HAS_SPI_LCD
#if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
#define LCD_PINS_RS 49 // CS chip select /SS chip slave select #define LCD_PINS_RS PD1 // 49 // CS chip select /SS chip slave select
#define LCD_PINS_ENABLE 51 // SID (MOSI) #define LCD_PINS_ENABLE PD3 // 51 // SID (MOSI)
#define LCD_PINS_D4 52 // SCK (CLK) clock #define LCD_PINS_D4 PD4 // 52 // SCK (CLK) clock
#elif BOTH(NEWPANEL, PANEL_ONE) #elif BOTH(NEWPANEL, PANEL_ONE)
#define LCD_PINS_RS PB8 #define LCD_PINS_RS PB8
#define LCD_PINS_ENABLE PD2 #define LCD_PINS_ENABLE PD2
@ -140,13 +140,13 @@
#define LCD_PINS_D6 PB14 #define LCD_PINS_D6 PB14
#define LCD_PINS_D7 PB15 #define LCD_PINS_D7 PB15
#if DISABLED(NEWPANEL) #if DISABLED(NEWPANEL)
#define BEEPER_PIN 33 #define BEEPER_PIN PC1 // 33
// Buttons attached to a shift register // Buttons attached to a shift register
// Not wired yet // Not wired yet
//#define SHIFT_CLK 38 //#define SHIFT_CLK PC6 // 38
//#define SHIFT_LD 42 //#define SHIFT_LD PC10 // 42
//#define SHIFT_OUT 40 //#define SHIFT_OUT PC8 // 40
//#define SHIFT_EN 17 //#define SHIFT_EN PA1 // 17
#endif #endif
#endif #endif
@ -154,125 +154,125 @@
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
#define BEEPER_PIN 37 #define BEEPER_PIN PC5
#define BTN_EN1 31 #define BTN_EN1 PB15 // 31
#define BTN_EN2 33 #define BTN_EN2 PC1 // 33
#define BTN_ENC 35 #define BTN_ENC PC3 // 35
#define SD_DETECT_PIN 49 #define SD_DETECT_PIN PD1 // 49
#define KILL_PIN 41 #define KILL_PIN PC9 // 41
#if ENABLED(BQ_LCD_SMART_CONTROLLER) #if ENABLED(BQ_LCD_SMART_CONTROLLER)
#define LCD_BACKLIGHT_PIN 39 #define LCD_BACKLIGHT_PIN PC7 // 39
#endif #endif
#elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD) #elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
#define BTN_EN1 64 #define BTN_EN1 PE0 // 64
#define BTN_EN2 59 #define BTN_EN2 PD11 // 59
#define BTN_ENC 63 #define BTN_ENC PD15 // 63
#define SD_DETECT_PIN 42 #define SD_DETECT_PIN PC10 // 42
#elif ENABLED(LCD_I2C_PANELOLU2) #elif ENABLED(LCD_I2C_PANELOLU2)
#define BTN_EN1 47 #define BTN_EN1 PC15 // 47
#define BTN_EN2 43 #define BTN_EN2 PC11 // 43
#define BTN_ENC 32 #define BTN_ENC PC0 // 32
#define LCD_SDSS 53 #define LCD_SDSS PD5 // 53
#define SD_DETECT_PIN -1 #define SD_DETECT_PIN -1
#define KILL_PIN 41 #define KILL_PIN PC9 // 41
#elif ENABLED(LCD_I2C_VIKI) #elif ENABLED(LCD_I2C_VIKI)
#define BTN_EN1 22 // http://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42. #define BTN_EN1 PB6 // 22 // http://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42.
#define BTN_EN2 7 // 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13. #define BTN_EN2 PA7 // 7 // 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13.
#define BTN_ENC -1 #define BTN_ENC -1
#define LCD_SDSS 53 #define LCD_SDSS PD5 // 53
#define SD_DETECT_PIN 49 #define SD_DETECT_PIN PD1 // 49
#elif ANY(VIKI2, miniVIKI) #elif ANY(VIKI2, miniVIKI)
#define BEEPER_PIN 33 #define BEEPER_PIN PC1 // 33
// Pins for DOGM SPI LCD Support // Pins for DOGM SPI LCD Support
#define DOGLCD_A0 44 #define DOGLCD_A0 PC12 // 44
#define DOGLCD_CS 45 #define DOGLCD_CS PC13 // 45
#define LCD_SCREEN_ROT_180 #define LCD_SCREEN_ROT_180
#define BTN_EN1 22 #define BTN_EN1 PB6 // 22
#define BTN_EN2 7 #define BTN_EN2 PA7 // 7
#define BTN_ENC 39 #define BTN_ENC PC7 // 39
#define SDSS 53 #define SDSS PD5 // 53
#define SD_DETECT_PIN -1 // Pin 49 for display sd interface, 72 for easy adapter board #define SD_DETECT_PIN -1 // Pin 49 for display sd interface, 72 for easy adapter board
#define KILL_PIN 31 #define KILL_PIN PB15 // 31
#define STAT_LED_RED_PIN 32 #define STAT_LED_RED_PIN PC0 // 32
#define STAT_LED_BLUE_PIN 35 #define STAT_LED_BLUE_PIN PC3 // 35
#elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
#define BTN_EN1 35 #define BTN_EN1 PC3 // 35
#define BTN_EN2 37 #define BTN_EN2 PC5 // 37
#define BTN_ENC 31 #define BTN_ENC PB15 // 31
#define SD_DETECT_PIN 49 #define SD_DETECT_PIN PD1 // 49
#define LCD_SDSS 53 #define LCD_SDSS PD5 // 53
#define KILL_PIN 41 #define KILL_PIN PC9 // 41
#define BEEPER_PIN 23 #define BEEPER_PIN PB7 // 23
#define DOGLCD_CS 29 #define DOGLCD_CS PB13 // 29
#define DOGLCD_A0 27 #define DOGLCD_A0 PB11 // 27
#define LCD_BACKLIGHT_PIN 33 #define LCD_BACKLIGHT_PIN PC1 // 33
#elif ENABLED(MINIPANEL) #elif ENABLED(MINIPANEL)
#define BEEPER_PIN 42 #define BEEPER_PIN PC10 // 42
// Pins for DOGM SPI LCD Support // Pins for DOGM SPI LCD Support
#define DOGLCD_A0 44 #define DOGLCD_A0 PC12 // 44
#define DOGLCD_CS 66 #define DOGLCD_CS PE2 // 66
#define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65 #define LCD_BACKLIGHT_PIN PE1 // 65 // backlight LED on A11/D65
#define SDSS 53 #define SDSS PD5 // 53
#define KILL_PIN 64 #define KILL_PIN PE0 // 64
// GLCD features // GLCD features
// Uncomment screen orientation // Uncomment screen orientation
//#define LCD_SCREEN_ROT_90 //#define LCD_SCREEN_ROT_90
//#define LCD_SCREEN_ROT_180 //#define LCD_SCREEN_ROT_180
//#define LCD_SCREEN_ROT_270 //#define LCD_SCREEN_ROT_270
// The encoder and click button // The encoder and click button
#define BTN_EN1 40 #define BTN_EN1 PC8 // 40
#define BTN_EN2 63 #define BTN_EN2 PD15 // 63
#define BTN_ENC 59 #define BTN_ENC PD11 // 59
// not connected to a pin // not connected to a pin
#define SD_DETECT_PIN 49 #define SD_DETECT_PIN PD1 // 49
#else #else
// Beeper on AUX-4 // Beeper on AUX-4
#define BEEPER_PIN 33 #define BEEPER_PIN PC1 // 33
// Buttons directly attached to AUX-2 // Buttons directly attached to AUX-2
#if ENABLED(REPRAPWORLD_KEYPAD) #if ENABLED(REPRAPWORLD_KEYPAD)
#define BTN_EN1 64 #define BTN_EN1 PE0 // 64
#define BTN_EN2 59 #define BTN_EN2 PD11 // 59
#define BTN_ENC 63 #define BTN_ENC PD15 // 63
#define SHIFT_OUT 40 #define SHIFT_OUT PC8 // 40
#define SHIFT_CLK 44 #define SHIFT_CLK PC12 // 44
#define SHIFT_LD 42 #define SHIFT_LD PC10 // 42
#elif ENABLED(PANEL_ONE) #elif ENABLED(PANEL_ONE)
#define BTN_EN1 59 // AUX2 PIN 3 #define BTN_EN1 PD11 // 59 // AUX2 PIN 3
#define BTN_EN2 63 // AUX2 PIN 4 #define BTN_EN2 PD15 // 63 // AUX2 PIN 4
#define BTN_ENC 49 // AUX3 PIN 7 #define BTN_ENC PD1 // 49 // AUX3 PIN 7
#else #else
#define BTN_EN1 37 #define BTN_EN1 PC5 // 37
#define BTN_EN2 35 #define BTN_EN2 PC3 // 35
#define BTN_ENC 31 #define BTN_ENC PB15 // 31
#endif #endif
#if ENABLED(G3D_PANEL) #if ENABLED(G3D_PANEL)
#define SD_DETECT_PIN 49 #define SD_DETECT_PIN PD1 // 49
#define KILL_PIN 41 #define KILL_PIN PC9 // 41
#else #else
//#define SD_DETECT_PIN -1 // Ramps doesn't use this //#define SD_DETECT_PIN -1 // Ramps doesn't use this
#endif #endif

Loading…
Cancel
Save