HAL folder organization (#14763)

Marlin/src/HAL/HAL.h

@@ -21,34 +21,6 @@
  */
 #pragma once
 
-#ifdef __AVR__
-  #define HAL_PLATFORM HAL_AVR
-#elif defined(ARDUINO_ARCH_SAM)
-  #define HAL_PLATFORM HAL_DUE
-#elif defined(__MK20DX256__)
-  #define HAL_PLATFORM HAL_TEENSY31_32
-#elif defined(__MK64FX512__) || defined(__MK66FX1M0__)
-  #define HAL_PLATFORM HAL_TEENSY35_36
-#elif defined(TARGET_LPC1768)
-  #define HAL_PLATFORM HAL_LPC1768
-#elif defined(__STM32F1__) || defined(TARGET_STM32F1)
-  #define HAL_PLATFORM HAL_STM32F1
-#elif defined(STM32GENERIC) && (defined(STM32F4) || defined(STM32F7))
-  #define HAL_PLATFORM HAL_STM32_F4_F7
-#elif defined(ARDUINO_ARCH_STM32)
-  #define HAL_PLATFORM HAL_STM32
-#elif defined(ARDUINO_ARCH_ESP32)
-  #define HAL_PLATFORM HAL_ESP32
-#elif defined(__PLAT_LINUX__)
-  #define HAL_PLATFORM HAL_LINUX
-#elif defined(__SAMD51__)
-  #define HAL_PLATFORM HAL_SAMD51
-#else
-  #error "Unsupported Platform!"
-#endif
-
-#define XSTR_(M) #M
-#define XSTR(M) XSTR_(M)
-#define HAL_PATH(PATH, NAME) XSTR(PATH/HAL_PLATFORM/NAME)
+#include "platforms.h"
 
 #include HAL_PATH(.,HAL.h)

Marlin/src/HAL/HAL_AVR/fastio_1280.h → Marlin/src/HAL/HAL_AVR/fastio/fastio_1280.h

@@ -29,7 +29,7 @@
  *   Logical Pin   : 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 | 78 79 80 xx xx 84 85 71 70 xx xx xx xx xx 81 82 83 xx xx 72 72 75 76 77 74 xx xx xx xx xx
  */
 
-#include "fastio_AVR.h"
+#include "../fastio_AVR.h"
 
 // change for your board
 #define DEBUG_LED   DIO21

Marlin/src/HAL/HAL_AVR/fastio_1281.h → Marlin/src/HAL/HAL_AVR/fastio/fastio_1281.h

@@ -28,7 +28,7 @@
  *   Port:        A0 A1 A2 A3 A4 A5 A6 A7 B0 B1 B2 B3 B4 B5 B6 B7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 E0 E1 E2 E3 E4 E5 E6 E7 F0 F1 F2 F3 F4 F5 F6 F7 G0 G1 G2 G3 G4 G5
  */
 
-#include "fastio_AVR.h"
+#include "../fastio_AVR.h"
 
 // change for your board
 #define DEBUG_LED   DIO46

Marlin/src/HAL/HAL_AVR/fastio_168.h → Marlin/src/HAL/HAL_AVR/fastio/fastio_168.h

@@ -28,7 +28,7 @@
  *   Port:        B0 B1 B2 B3 B4 B5 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7
  */
 
-#include "fastio_AVR.h"
+#include "../fastio_AVR.h"
 
 #define DEBUG_LED   AIO5
 

Marlin/src/HAL/HAL_AVR/fastio_644.h → Marlin/src/HAL/HAL_AVR/fastio/fastio_644.h

@@ -54,7 +54,7 @@
  *                        +--------+
  */
 
-#include "fastio_AVR.h"
+#include "../fastio_AVR.h"
 
 #define DEBUG_LED   DIO0
 

Marlin/src/HAL/HAL_AVR/fastio_AT90USB.h → Marlin/src/HAL/HAL_AVR/fastio/fastio_AT90USB.h

@@ -29,7 +29,7 @@
  *            The logical pins 46 and 47 are not supported by Teensyduino, but are supported below as E2 and E3
  */
 
-#include "fastio_AVR.h"
+#include "../fastio_AVR.h"
 
 // change for your board
 #define DEBUG_LED   DIO31 /* led D5 red */

Marlin/src/HAL/HAL_AVR/fastio_AVR.h

@@ -27,8 +27,6 @@
  * Contributed by Triffid_Hunter and modified by Kliment, thinkyhead, Bob-the-Kuhn, et.al.
  */
 
-#include "../../core/macros.h"
-
 #include <avr/io.h>
 
 #define AVR_AT90USB1286_FAMILY (defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1286P__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB646P__) || defined(__AVR_AT90USB647__))
@@ -41,15 +39,15 @@
  * Include Ports and Functions
  */
 #if AVR_ATmega328_FAMILY
-  #include "fastio_168.h"
+  #include "fastio/fastio_168.h"
 #elif AVR_ATmega1284_FAMILY
-  #include "fastio_644.h"
+  #include "fastio/fastio_644.h"
 #elif AVR_ATmega2560_FAMILY
-  #include "fastio_1280.h"
+  #include "fastio/fastio_1280.h"
 #elif AVR_AT90USB1286_FAMILY
-  #include "fastio_AT90USB.h"
+  #include "fastio/fastio_AT90USB.h"
 #elif AVR_ATmega2561_FAMILY
-  #include "fastio_1281.h"
+  #include "fastio/fastio_1281.h"
 #else
   #error "No FastIO definition for the selected AVR Board."
 #endif
@@ -274,6 +272,8 @@ enum ClockSource2 : char {
 #define SET_FOCB(T,V) SET_FOC(T,B,V)
 #define SET_FOCC(T,V) SET_FOC(T,C,V)
 
+#if 0
+
 /**
  * PWM availability macros
  */
@@ -337,6 +337,8 @@ enum ClockSource2 : char {
 
 #define PWM_CHK(P) (PWM_CHK_HEATER(P) || PWM_CHK_SERVO(P) || PWM_CHK_MOTOR_CURRENT(P) || PWM_CHK_FAN_A(P) || PWM_CHK_FAN_B(P))
 
+#endif // PWM_CHK is not used in Marlin
+
 // define which hardware PWMs are available for the current CPU
 // all timer 1 PWMS deleted from this list because they are never available
 #if AVR_ATmega2560_FAMILY

Marlin/src/HAL/HAL_AVR/inc/Conditionals_LCD.h

@@ -0,0 +1,22 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once

Marlin/src/HAL/HAL_AVR/inc/Conditionals_adv.h

@@ -0,0 +1,22 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once

Marlin/src/HAL/HAL_AVR/inc/Conditionals_post.h

@@ -0,0 +1,22 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once

Marlin/src/HAL/HAL_DUE/u8g_com_HAL_DUE_shared_hw_spi.cpp → Marlin/src/HAL/HAL_DUE/dogm/u8g_com_HAL_DUE_shared_hw_spi.cpp

@@ -21,58 +21,57 @@
  */
 
 
-/*
-
-  based on u8g_com_msp430_hw_spi.c
-
-  Universal 8bit Graphics Library
-
-  Copyright (c) 2012, olikraus@gmail.com
-  All rights reserved.
-
-  Redistribution and use in source and binary forms, with or without modification,
-  are permitted provided that the following conditions are met:
-
-  * Redistributions of source code must retain the above copyright notice, this list
-  of conditions and the following disclaimer.
-
-  * Redistributions in binary form must reproduce the above copyright notice, this
-  list of conditions and the following disclaimer in the documentation and/or other
-  materials provided with the distribution.
-
-  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
-  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
-  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
-  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-*/
+/**
+ * Based on u8g_com_msp430_hw_spi.c
+ *
+ * Universal 8bit Graphics Library
+ *
+ * Copyright (c) 2012, olikraus@gmail.com
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *
+ * * Redistributions of source code must retain the above copyright notice, this list
+ * of conditions and the following disclaimer.
+ *
+ * * Redistributions in binary form must reproduce the above copyright notice, this
+ * list of conditions and the following disclaimer in the documentation and/or other
+ * materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
 
 #ifdef __SAM3X8E__
 
-#include "../../inc/MarlinConfigPre.h"
+#include "../../../inc/MarlinConfigPre.h"
 
 #if HAS_GRAPHICAL_LCD
 
 #include <U8glib.h>
 
-#include "../../Marlin.h"
+#include "../../../Marlin.h"
 
 void spiBegin();
 void spiInit(uint8_t spiRate);
 void spiSend(uint8_t b);
 void spiSend(const uint8_t* buf, size_t n);
 
-#include "../shared/Marduino.h"
-#include "fastio_Due.h"
+#include "../../shared/Marduino.h"
+#include "../fastio_Due.h"
 
 void u8g_SetPIOutput_DUE_hw_spi(u8g_t *u8g, uint8_t pin_index) {
    PIO_Configure(g_APinDescription[u8g->pin_list[pin_index]].pPort, PIO_OUTPUT_1,

Marlin/src/HAL/HAL_DUE/u8g_com_HAL_DUE_st7920_sw_spi.cpp → Marlin/src/HAL/HAL_DUE/dogm/u8g_com_HAL_DUE_st7920_sw_spi.cpp

@@ -55,11 +55,11 @@
 
 #ifdef ARDUINO_ARCH_SAM
 
-#include "../../inc/MarlinConfigPre.h"
+#include "../../../inc/MarlinConfigPre.h"
 
 #if ENABLED(U8GLIB_ST7920)
 
-#include "../shared/Delay.h"
+#include "../../shared/Delay.h"
 
 #include <U8glib.h>
 
@@ -145,8 +145,8 @@ uint8_t u8g_com_HAL_DUE_ST7920_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_va
 }
 
 #if ENABLED(LIGHTWEIGHT_UI)
-  #include "../../lcd/ultralcd.h"
-  #include "../shared/HAL_ST7920.h"
+  #include "../../../lcd/ultralcd.h"
+  #include "../../shared/HAL_ST7920.h"
 
   #define ST7920_CS_PIN LCD_PINS_RS
 

Marlin/src/HAL/HAL_DUE/u8g_com_HAL_DUE_sw_spi.cpp → Marlin/src/HAL/HAL_DUE/dogm/u8g_com_HAL_DUE_sw_spi.cpp

@@ -55,7 +55,7 @@
 
 #ifdef ARDUINO_ARCH_SAM
 
-#include "../../inc/MarlinConfigPre.h"
+#include "../../../inc/MarlinConfigPre.h"
 
 #if HAS_GRAPHICAL_LCD && DISABLED(U8GLIB_ST7920)
 
@@ -64,8 +64,8 @@
 
 #include "u8g_com_HAL_DUE_sw_spi_shared.h"
 
-#include "../shared/Marduino.h"
-#include "../shared/Delay.h"
+#include "../../shared/Marduino.h"
+#include "../../shared/Delay.h"
 
 #include <U8glib.h>
 

Marlin/src/HAL/HAL_DUE/u8g_com_HAL_DUE_sw_spi_shared.cpp → Marlin/src/HAL/HAL_DUE/dogm/u8g_com_HAL_DUE_sw_spi_shared.cpp

@@ -55,11 +55,11 @@
 
 #ifdef ARDUINO_ARCH_SAM
 
-#include "../../inc/MarlinConfigPre.h"
+#include "../../../inc/MarlinConfigPre.h"
 
 #if HAS_GRAPHICAL_LCD
 
-#include "../shared/Delay.h"
+#include "../../shared/Delay.h"
 
 #include <U8glib.h>
 

Marlin/src/HAL/HAL_DUE/u8g_com_HAL_DUE_sw_spi_shared.h → Marlin/src/HAL/HAL_DUE/dogm/u8g_com_HAL_DUE_sw_spi_shared.h

@@ -21,8 +21,8 @@
  */
 #pragma once
 
-#include "../../inc/MarlinConfigPre.h"
-#include "../shared/Marduino.h"
+#include "../../../inc/MarlinConfigPre.h"
+#include "../../shared/Marduino.h"
 
 void u8g_SetPIOutput_DUE(u8g_t *u8g, uint8_t pin_index);
 void u8g_SetPILevel_DUE(u8g_t *u8g, uint8_t pin_index, uint8_t level);

Marlin/src/HAL/HAL_DUE/G2_PWM.cpp → Marlin/src/HAL/HAL_DUE/fastio/G2_PWM.cpp

@@ -40,7 +40,7 @@
  * Some jitter in the Vref signal is OK so the interrupt priority is left at its default value.
  */
 
-#include "../../inc/MarlinConfig.h"
+#include "../../../inc/MarlinConfig.h"
 
 #if MB(PRINTRBOARD_G2)
 

Marlin/src/HAL/HAL_DUE/G2_PWM.h → Marlin/src/HAL/HAL_DUE/fastio/G2_PWM.h

@@ -26,8 +26,8 @@
  * PR #7500. It is hardwired for the PRINTRBOARD_G2 Motor Current needs.
  */
 
-#include "../../inc/MarlinConfigPre.h"
-#include "../../module/stepper.h"
+#include "../../../inc/MarlinConfigPre.h"
+#include "../../../module/stepper.h"
 //C:\Users\bobku\Documents\GitHub\Marlin-Bob-2\Marlin\src\module\stepper.h
 //C:\Users\bobku\Documents\GitHub\Marlin-Bob-2\Marlin\src\HAL\HAL_DUE\G2_PWM.h
 

Marlin/src/HAL/HAL_DUE/fastio_Due.h

@@ -77,7 +77,7 @@
 
 #if MB(PRINTRBOARD_G2)
 
-  #include "G2_pins.h"
+  #include "fastio/G2_pins.h"
 
   // Set pin as input
   #define _SET_INPUT(IO) do{ \

Marlin/src/HAL/HAL_DUE/inc/Conditionals_LCD.h

@@ -0,0 +1,22 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once

Marlin/src/HAL/HAL_DUE/inc/Conditionals_adv.h

@@ -0,0 +1,22 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once

Marlin/src/HAL/HAL_DUE/inc/Conditionals_post.h

@@ -0,0 +1,22 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once

Marlin/src/HAL/HAL_ESP32/inc/Conditionals_LCD.h

@@ -0,0 +1,22 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once

Marlin/src/HAL/HAL_ESP32/inc/Conditionals_adv.h

@@ -0,0 +1,22 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once

Marlin/src/HAL/HAL_ESP32/inc/Conditionals_post.h

@@ -0,0 +1,22 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once

Marlin/src/HAL/HAL_LINUX/inc/Conditionals_LCD.h

@@ -0,0 +1,22 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once

Marlin/src/HAL/HAL_LINUX/inc/Conditionals_adv.h

@@ -0,0 +1,22 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once

Marlin/src/HAL/HAL_LINUX/inc/Conditionals_post.h

@@ -0,0 +1,22 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once

Marlin/src/HAL/HAL_LPC1768/inc/Conditionals_LCD.h

@@ -0,0 +1,22 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once

Marlin/src/HAL/HAL_LPC1768/inc/Conditionals_adv.h

@@ -0,0 +1,22 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once

Marlin/src/HAL/HAL_LPC1768/inc/Conditionals_post.h

@@ -0,0 +1,22 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once

Marlin/src/HAL/HAL_SAMD51/inc/Conditionals_LCD.h

@@ -0,0 +1,22 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once

Marlin/src/HAL/HAL_SAMD51/inc/Conditionals_adv.h

@@ -0,0 +1,22 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once

Marlin/src/HAL/HAL_SAMD51/inc/Conditionals_post.h

@@ -0,0 +1,22 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once

Marlin/src/HAL/HAL_STM32/inc/Conditionals_LCD.h

@@ -0,0 +1,22 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once

Marlin/src/HAL/HAL_STM32/inc/Conditionals_adv.h

@@ -0,0 +1,22 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once

Marlin/src/HAL/HAL_STM32/inc/Conditionals_post.h

@@ -0,0 +1,22 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once

Marlin/src/HAL/HAL_STM32F1/HAL_sdio_STM32F1.h

@@ -23,8 +23,8 @@
 
 #include "../shared/Marduino.h"
 
-#include "libmaple/sdio.h"
-#include "libmaple/dma.h"
+#include <libmaple/sdio.h>
+#include <libmaple/dma.h>
 
 // ------------------------
 // Defines

Marlin/src/HAL/HAL_STM32F1/u8g_com_stm32duino_fsmc.cpp → Marlin/src/HAL/HAL_STM32F1/dogm/u8g_com_stm32duino_fsmc.cpp

@@ -26,17 +26,17 @@
  * Communication interface for FSMC
  */
 
-#include "../../inc/MarlinConfig.h"
+#include "../../../inc/MarlinConfig.h"
 
 #if defined(ARDUINO_ARCH_STM32F1) && PIN_EXISTS(FSMC_CS) // FSMC on 100/144 pins SoCs
 
 #if HAS_GRAPHICAL_LCD
 
-#include "U8glib.h"
-#include "libmaple/fsmc.h"
-#include "libmaple/gpio.h"
-#include "libmaple/dma.h"
-#include "boards.h"
+#include <U8glib.h>
+#include <libmaple/fsmc.h>
+#include <libmaple/gpio.h>
+#include <libmaple/dma.h>
+#include <boards.h>
 
 #ifndef LCD_READ_ID
   #define LCD_READ_ID 0x04   // Read display identification information (0xD3 on ILI9341)

Marlin/src/HAL/HAL_STM32F1/u8g_com_stm32duino_swspi.cpp → Marlin/src/HAL/HAL_STM32F1/dogm/u8g_com_stm32duino_swspi.cpp

@@ -18,11 +18,11 @@
  */
 #ifdef __STM32F1__
 
-#include "../../inc/MarlinConfig.h"
+#include "../../../inc/MarlinConfig.h"
 
 #if HAS_GRAPHICAL_LCD && ENABLED(FORCE_SOFT_SPI)
 
-#include "HAL.h"
+#include "../HAL.h"
 #include <U8glib.h>
 
 #undef SPI_SPEED

Marlin/src/HAL/HAL_STM32F1/inc/Conditionals_LCD.h

@@ -0,0 +1,22 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once

Marlin/src/HAL/HAL_STM32F1/inc/Conditionals_adv.h

@@ -0,0 +1,22 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once

Marlin/src/HAL/HAL_STM32F1/inc/Conditionals_post.h

@@ -0,0 +1,22 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once

Marlin/src/HAL/HAL_STM32_F4_F7/inc/Conditionals_LCD.h

@@ -0,0 +1,22 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once

Marlin/src/HAL/HAL_STM32_F4_F7/inc/Conditionals_adv.h

@@ -0,0 +1,22 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once

Marlin/src/HAL/HAL_STM32_F4_F7/inc/Conditionals_post.h

@@ -0,0 +1,22 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once

Marlin/src/HAL/HAL_TEENSY31_32/inc/Conditionals_LCD.h

@@ -0,0 +1,22 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once

Marlin/src/HAL/HAL_TEENSY31_32/inc/Conditionals_adv.h

@@ -0,0 +1,22 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once

Marlin/src/HAL/HAL_TEENSY31_32/inc/Conditionals_post.h

@@ -0,0 +1,22 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once

Marlin/src/HAL/HAL_TEENSY35_36/inc/Conditionals_LCD.h

@@ -0,0 +1,22 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once

Marlin/src/HAL/HAL_TEENSY35_36/inc/Conditionals_adv.h

@@ -0,0 +1,22 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once

Marlin/src/HAL/HAL_TEENSY35_36/inc/Conditionals_post.h

@@ -0,0 +1,22 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once

Marlin/src/HAL/platforms.h

@@ -0,0 +1,52 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#ifdef __AVR__
+  #define HAL_PLATFORM HAL_AVR
+#elif defined(ARDUINO_ARCH_SAM)
+  #define HAL_PLATFORM HAL_DUE
+#elif defined(__MK20DX256__)
+  #define HAL_PLATFORM HAL_TEENSY31_32
+#elif defined(__MK64FX512__) || defined(__MK66FX1M0__)
+  #define HAL_PLATFORM HAL_TEENSY35_36
+#elif defined(TARGET_LPC1768)
+  #define HAL_PLATFORM HAL_LPC1768
+#elif defined(__STM32F1__) || defined(TARGET_STM32F1)
+  #define HAL_PLATFORM HAL_STM32F1
+#elif defined(STM32GENERIC) && (defined(STM32F4) || defined(STM32F7))
+  #define HAL_PLATFORM HAL_STM32_F4_F7
+#elif defined(ARDUINO_ARCH_STM32)
+  #define HAL_PLATFORM HAL_STM32
+#elif defined(ARDUINO_ARCH_ESP32)
+  #define HAL_PLATFORM HAL_ESP32
+#elif defined(__PLAT_LINUX__)
+  #define HAL_PLATFORM HAL_LINUX
+#elif defined(__SAMD51__)
+  #define HAL_PLATFORM HAL_SAMD51
+#else
+  #error "Unsupported Platform!"
+#endif
+
+#define XSTR_(M) #M
+#define XSTR(M) XSTR_(M)
+#define HAL_PATH(PATH, NAME) XSTR(PATH/HAL_PLATFORM/NAME)

Marlin/src/inc/MarlinConfig.h

@@ -30,13 +30,13 @@
 #include "../HAL/HAL.h"
 
 #include "../pins/pins.h"
-
 #include HAL_PATH(../HAL, spi_pins.h)
 
 #include "Conditionals_post.h"
-#include "SanityCheck.h"
+#include HAL_PATH(../HAL, inc/Conditionals_post.h)
 
-#include HAL_PATH(../HAL, SanityCheck.h)
+#include "SanityCheck.h"
+#include HAL_PATH(../HAL, inc/SanityCheck.h)
 
 // Include all core headers
 #include "../core/enum.h"

Marlin/src/inc/MarlinConfigPre.h

@@ -27,12 +27,19 @@
 // Prefix header to acquire configurations
 //
 
+#include "../HAL/platforms.h"
+
 #include "../core/boards.h"
 #include "../core/macros.h"
 #include "../core/millis_t.h"
 #include "Version.h"
 #include "../../Configuration.h"
+
 #include "Conditionals_LCD.h"
+#include HAL_PATH(../HAL, inc/Conditionals_LCD.h)
+
 #include "../core/drivers.h"
 #include "../../Configuration_adv.h"
+
 #include "Conditionals_adv.h"
+#include HAL_PATH(../HAL, inc/Conditionals_adv.h)