Allow stopwatch and printcounter to go over 18 hours

Marlin/Marlin_main.cpp

@@ -1172,8 +1172,7 @@ inline void get_serial_commands() {
           print_job_timer.stop();
           char time[30];
           millis_t t = print_job_timer.duration();
-          int hours = t / 60 / 60, minutes = (t / 60) % 60;
-          sprintf_P(time, PSTR("%i " MSG_END_HOUR " %i " MSG_END_MINUTE), hours, minutes);
+          sprintf_P(time, PSTR("%i " MSG_END_HOUR " %i " MSG_END_MINUTE), int(t / 60 / 60), int(t / 60) % 60);
           SERIAL_ECHO_START;
           SERIAL_ECHOLN(time);
           lcd_setstatus(time, true);

Marlin/dogm_lcd_implementation.h

@@ -386,7 +386,7 @@ static void lcd_implementation_status_screen() {
     }
 
     u8g.setPrintPos(80,48);
-    uint16_t time = print_job_timer.duration() / 60;
+    millis_t time = print_job_timer.duration() / 60;
     if (time != 0) {
       lcd_print(itostr2(time/60));
       lcd_print(':');

Marlin/printcounter.cpp

@@ -27,12 +27,12 @@ PrintCounter::PrintCounter(): super() {
   this->loadStats();
 }
 
-uint16_t PrintCounter::deltaDuration() {
+millis_t PrintCounter::deltaDuration() {
   #if ENABLED(DEBUG_PRINTCOUNTER)
     PrintCounter::debug(PSTR("deltaDuration"));
   #endif
 
-  uint16_t tmp = this->lastDuration;
+  millis_t tmp = this->lastDuration;
   this->lastDuration = this->duration();
   return this->lastDuration - tmp;
 }
@@ -88,12 +88,12 @@ void PrintCounter::showStats() {
   SERIAL_ECHO(this->data.totalPrints - this->data.finishedPrints
     - ((this->isRunning() || this->isPaused()) ? 1 : 0)); // Removes 1 from failures with an active counter
 
-  uint32_t t = this->data.printTime / 60;
+  millis_t t = this->data.printTime / 60; // minutes from seconds
   SERIAL_ECHOPGM(", Total print time: ");
-  SERIAL_ECHO(t / 60);
+  SERIAL_ECHO(t / 60); // hours
 
   SERIAL_ECHOPGM("h ");
-  SERIAL_ECHO(t % 60);
+  SERIAL_ECHO(t % 60); // minutes
 
   SERIAL_ECHOPGM("min");
 
@@ -110,10 +110,10 @@ void PrintCounter::showStats() {
 void PrintCounter::tick() {
   if (!this->isRunning()) return;
 
-  static uint32_t update_before = millis(),
+  static millis_t update_before = millis(),
                   eeprom_before = millis();
 
-  uint32_t now = millis();
+  millis_t now = millis();
 
   // Trying to get the amount of calculations down to the bare min
   const static uint16_t i = this->updateInterval * 1000;
@@ -128,8 +128,7 @@ void PrintCounter::tick() {
   }
 
   // Trying to get the amount of calculations down to the bare min
-  const static uint32_t j = this->saveInterval * 1000;
-
+  const static millis_t j = this->saveInterval * 1000;
   if (now - eeprom_before >= j) {
     eeprom_before = now;
     this->saveStats();

Marlin/printcounter.h

@@ -35,8 +35,8 @@ struct printStatistics {    // 13 bytes
   //const uint8_t magic;    // Magic header, it will always be 0x16
   uint16_t totalPrints;     // Number of prints
   uint16_t finishedPrints;  // Number of complete prints
-  uint32_t printTime;       // Total printing time
-  uint32_t longestPrint;    // Longest print job - not in use
+  millis_t printTime;       // Total printing time
+  millis_t longestPrint;    // Longest print job - not in use
 };
 
 class PrintCounter: public Stopwatch {
@@ -74,7 +74,7 @@ class PrintCounter: public Stopwatch {
      * @details Stores the timestamp of the last deltaDuration(), this is
      * required due to the updateInterval cycle.
      */
-    uint16_t lastDuration;
+    millis_t lastDuration;
 
     /**
      * @brief Stats were loaded from EERPROM
@@ -90,7 +90,7 @@ class PrintCounter: public Stopwatch {
      * used internally for print statistics accounting is not intended to be a
      * user callable function.
      */
-    uint16_t deltaDuration();
+    millis_t deltaDuration();
 
   public:
     /**

Marlin/stopwatch.cpp

@@ -88,9 +88,9 @@ bool Stopwatch::isPaused() {
   return (this->state == STOPWATCH_PAUSED) ? true : false;
 }
 
-uint16_t Stopwatch::duration() {
+millis_t Stopwatch::duration() {
   return (((this->isRunning()) ? millis() : this->stopTimestamp)
-          - this->startTimestamp) / 1000 + this->accumulator;
+          - this->startTimestamp) / 1000UL + this->accumulator;
 }
 
 #if ENABLED(DEBUG_STOPWATCH)

Marlin/stopwatch.h

@@ -42,9 +42,9 @@ enum StopwatchState {
 class Stopwatch {
   private:
     StopwatchState state;
-    uint16_t accumulator;
-    uint32_t startTimestamp;
-    uint32_t stopTimestamp;
+    millis_t accumulator;
+    millis_t startTimestamp;
+    millis_t stopTimestamp;
 
   public:
     /**
@@ -101,7 +101,7 @@ class Stopwatch {
      * @details Returns the total number of seconds the timer has been running.
      * @return the delta since starting the stopwatch
      */
-    uint16_t duration();
+    millis_t duration();
 
     #if ENABLED(DEBUG_STOPWATCH)
 

Marlin/ultralcd.cpp

@@ -1967,13 +1967,13 @@ void kill_screen(const char* lcd_msg) {
         print_job_counter.loadStats();
         printStatistics stats = print_job_counter.getStats();
 
-        char printTime[6];
-        sprintf(printTime, "%02d:%02d", int(stats.printTime / 3600), int(stats.printTime / 60) % 60);
+        char timeString[8];
+        sprintf_P(timeString, PSTR("%i:%02i"), int(stats.printTime / 60 / 60), int(stats.printTime / 60) % 60);
 
-        START_SCREEN();
+        START_SCREEN();                                                                              // 12345678901234567890
         STATIC_ITEM(MSG_INFO_PRINT_COUNT ": ", false, false, itostr3left(stats.totalPrints));        // Print Count : 999
         STATIC_ITEM(MSG_INFO_FINISHED_PRINTS ": ", false, false, itostr3left(stats.finishedPrints)); // Finished    : 666
-        STATIC_ITEM(MSG_INFO_PRINT_TIME ": ", false, false, printTime);                              // Total Time  : 12:34
+        STATIC_ITEM(MSG_INFO_PRINT_TIME ": ", false, false, timeString);                             // Total Time  : 123:45
         END_SCREEN();
       }
     #endif // PRINTCOUNTER