Browse Source

Print job timer comment changed

pull/1/head
Petr Zahradnik 8 years ago
committed by Scott Lahteine
parent
commit
e282d69f63
  1. 5
      Marlin/Configuration.h
  2. 5
      Marlin/example_configurations/Cartesio/Configuration.h
  3. 5
      Marlin/example_configurations/Felix/Configuration.h
  4. 5
      Marlin/example_configurations/Hephestos/Configuration.h
  5. 5
      Marlin/example_configurations/Hephestos_2/Configuration.h
  6. 5
      Marlin/example_configurations/K8200/Configuration.h
  7. 5
      Marlin/example_configurations/K8400/Configuration.h
  8. 5
      Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
  9. 5
      Marlin/example_configurations/RigidBot/Configuration.h
  10. 5
      Marlin/example_configurations/SCARA/Configuration.h
  11. 5
      Marlin/example_configurations/TAZ4/Configuration.h
  12. 5
      Marlin/example_configurations/WITBOX/Configuration.h
  13. 5
      Marlin/example_configurations/adafruit/ST7565/Configuration.h
  14. 5
      Marlin/example_configurations/delta/biv2.5/Configuration.h
  15. 5
      Marlin/example_configurations/delta/generic/Configuration.h
  16. 5
      Marlin/example_configurations/delta/kossel_mini/Configuration.h
  17. 5
      Marlin/example_configurations/delta/kossel_pro/Configuration.h
  18. 5
      Marlin/example_configurations/delta/kossel_xl/Configuration.h
  19. 5
      Marlin/example_configurations/makibox/Configuration.h
  20. 5
      Marlin/example_configurations/tvrrug/Round2/Configuration.h

5
Marlin/Configuration.h

@ -790,7 +790,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
// Print job timer // Print job timer
// //
// Enable this option to automatically start and stop the // Enable this option to automatically start and stop the
// print job timer when M104 and M109 commands are received. // print job timer when M104/M109/M190 commands are received.
// M104 (extruder without wait) - high temp = none, low temp = stop timer
// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
// M190 (bed with wait) - high temp = start timer, low temp = none
// //
// In all cases the timer can be started and stopped using // In all cases the timer can be started and stopped using
// the following commands: // the following commands:

5
Marlin/example_configurations/Cartesio/Configuration.h

@ -789,7 +789,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
// Print job timer // Print job timer
// //
// Enable this option to automatically start and stop the // Enable this option to automatically start and stop the
// print job timer when M104 and M109 commands are received. // print job timer when M104/M109/M190 commands are received.
// M104 (extruder without wait) - high temp = none, low temp = stop timer
// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
// M190 (bed with wait) - high temp = start timer, low temp = none
// //
// In all cases the timer can be started and stopped using // In all cases the timer can be started and stopped using
// the following commands: // the following commands:

5
Marlin/example_configurations/Felix/Configuration.h

@ -773,7 +773,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
// Print job timer // Print job timer
// //
// Enable this option to automatically start and stop the // Enable this option to automatically start and stop the
// print job timer when M104 and M109 commands are received. // print job timer when M104/M109/M190 commands are received.
// M104 (extruder without wait) - high temp = none, low temp = stop timer
// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
// M190 (bed with wait) - high temp = start timer, low temp = none
// //
// In all cases the timer can be started and stopped using // In all cases the timer can be started and stopped using
// the following commands: // the following commands:

5
Marlin/example_configurations/Hephestos/Configuration.h

@ -782,7 +782,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
// Print job timer // Print job timer
// //
// Enable this option to automatically start and stop the // Enable this option to automatically start and stop the
// print job timer when M104 and M109 commands are received. // print job timer when M104/M109/M190 commands are received.
// M104 (extruder without wait) - high temp = none, low temp = stop timer
// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
// M190 (bed with wait) - high temp = start timer, low temp = none
// //
// In all cases the timer can be started and stopped using // In all cases the timer can be started and stopped using
// the following commands: // the following commands:

5
Marlin/example_configurations/Hephestos_2/Configuration.h

@ -784,7 +784,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
// Print job timer // Print job timer
// //
// Enable this option to automatically start and stop the // Enable this option to automatically start and stop the
// print job timer when M104 and M109 commands are received. // print job timer when M104/M109/M190 commands are received.
// M104 (extruder without wait) - high temp = none, low temp = stop timer
// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
// M190 (bed with wait) - high temp = start timer, low temp = none
// //
// In all cases the timer can be started and stopped using // In all cases the timer can be started and stopped using
// the following commands: // the following commands:

5
Marlin/example_configurations/K8200/Configuration.h

@ -807,7 +807,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
// Print job timer // Print job timer
// //
// Enable this option to automatically start and stop the // Enable this option to automatically start and stop the
// print job timer when M104 and M109 commands are received. // print job timer when M104/M109/M190 commands are received.
// M104 (extruder without wait) - high temp = none, low temp = stop timer
// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
// M190 (bed with wait) - high temp = start timer, low temp = none
// //
// In all cases the timer can be started and stopped using // In all cases the timer can be started and stopped using
// the following commands: // the following commands:

5
Marlin/example_configurations/K8400/Configuration.h

@ -790,7 +790,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
// Print job timer // Print job timer
// //
// Enable this option to automatically start and stop the // Enable this option to automatically start and stop the
// print job timer when M104 and M109 commands are received. // print job timer when M104/M109/M190 commands are received.
// M104 (extruder without wait) - high temp = none, low temp = stop timer
// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
// M190 (bed with wait) - high temp = start timer, low temp = none
// //
// In all cases the timer can be started and stopped using // In all cases the timer can be started and stopped using
// the following commands: // the following commands:

5
Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h

@ -790,7 +790,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
// Print job timer // Print job timer
// //
// Enable this option to automatically start and stop the // Enable this option to automatically start and stop the
// print job timer when M104 and M109 commands are received. // print job timer when M104/M109/M190 commands are received.
// M104 (extruder without wait) - high temp = none, low temp = stop timer
// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
// M190 (bed with wait) - high temp = start timer, low temp = none
// //
// In all cases the timer can be started and stopped using // In all cases the timer can be started and stopped using
// the following commands: // the following commands:

5
Marlin/example_configurations/RigidBot/Configuration.h

@ -788,7 +788,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
// Print job timer // Print job timer
// //
// Enable this option to automatically start and stop the // Enable this option to automatically start and stop the
// print job timer when M104 and M109 commands are received. // print job timer when M104/M109/M190 commands are received.
// M104 (extruder without wait) - high temp = none, low temp = stop timer
// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
// M190 (bed with wait) - high temp = start timer, low temp = none
// //
// In all cases the timer can be started and stopped using // In all cases the timer can be started and stopped using
// the following commands: // the following commands:

5
Marlin/example_configurations/SCARA/Configuration.h

@ -798,7 +798,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
// Print job timer // Print job timer
// //
// Enable this option to automatically start and stop the // Enable this option to automatically start and stop the
// print job timer when M104 and M109 commands are received. // print job timer when M104/M109/M190 commands are received.
// M104 (extruder without wait) - high temp = none, low temp = stop timer
// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
// M190 (bed with wait) - high temp = start timer, low temp = none
// //
// In all cases the timer can be started and stopped using // In all cases the timer can be started and stopped using
// the following commands: // the following commands:

5
Marlin/example_configurations/TAZ4/Configuration.h

@ -811,7 +811,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
// Print job timer // Print job timer
// //
// Enable this option to automatically start and stop the // Enable this option to automatically start and stop the
// print job timer when M104 and M109 commands are received. // print job timer when M104/M109/M190 commands are received.
// M104 (extruder without wait) - high temp = none, low temp = stop timer
// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
// M190 (bed with wait) - high temp = start timer, low temp = none
// //
// In all cases the timer can be started and stopped using // In all cases the timer can be started and stopped using
// the following commands: // the following commands:

5
Marlin/example_configurations/WITBOX/Configuration.h

@ -782,7 +782,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
// Print job timer // Print job timer
// //
// Enable this option to automatically start and stop the // Enable this option to automatically start and stop the
// print job timer when M104 and M109 commands are received. // print job timer when M104/M109/M190 commands are received.
// M104 (extruder without wait) - high temp = none, low temp = stop timer
// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
// M190 (bed with wait) - high temp = start timer, low temp = none
// //
// In all cases the timer can be started and stopped using // In all cases the timer can be started and stopped using
// the following commands: // the following commands:

5
Marlin/example_configurations/adafruit/ST7565/Configuration.h

@ -790,7 +790,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
// Print job timer // Print job timer
// //
// Enable this option to automatically start and stop the // Enable this option to automatically start and stop the
// print job timer when M104 and M109 commands are received. // print job timer when M104/M109/M190 commands are received.
// M104 (extruder without wait) - high temp = none, low temp = stop timer
// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
// M190 (bed with wait) - high temp = start timer, low temp = none
// //
// In all cases the timer can be started and stopped using // In all cases the timer can be started and stopped using
// the following commands: // the following commands:

5
Marlin/example_configurations/delta/biv2.5/Configuration.h

@ -885,7 +885,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
// Print job timer // Print job timer
// //
// Enable this option to automatically start and stop the // Enable this option to automatically start and stop the
// print job timer when M104 and M109 commands are received. // print job timer when M104/M109/M190 commands are received.
// M104 (extruder without wait) - high temp = none, low temp = stop timer
// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
// M190 (bed with wait) - high temp = start timer, low temp = none
// //
// In all cases the timer can be started and stopped using // In all cases the timer can be started and stopped using
// the following commands: // the following commands:

5
Marlin/example_configurations/delta/generic/Configuration.h

@ -879,7 +879,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
// Print job timer // Print job timer
// //
// Enable this option to automatically start and stop the // Enable this option to automatically start and stop the
// print job timer when M104 and M109 commands are received. // print job timer when M104/M109/M190 commands are received.
// M104 (extruder without wait) - high temp = none, low temp = stop timer
// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
// M190 (bed with wait) - high temp = start timer, low temp = none
// //
// In all cases the timer can be started and stopped using // In all cases the timer can be started and stopped using
// the following commands: // the following commands:

5
Marlin/example_configurations/delta/kossel_mini/Configuration.h

@ -882,7 +882,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
// Print job timer // Print job timer
// //
// Enable this option to automatically start and stop the // Enable this option to automatically start and stop the
// print job timer when M104 and M109 commands are received. // print job timer when M104/M109/M190 commands are received.
// M104 (extruder without wait) - high temp = none, low temp = stop timer
// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
// M190 (bed with wait) - high temp = start timer, low temp = none
// //
// In all cases the timer can be started and stopped using // In all cases the timer can be started and stopped using
// the following commands: // the following commands:

5
Marlin/example_configurations/delta/kossel_pro/Configuration.h

@ -882,7 +882,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
// Print job timer // Print job timer
// //
// Enable this option to automatically start and stop the // Enable this option to automatically start and stop the
// print job timer when M104 and M109 commands are received. // print job timer when M104/M109/M190 commands are received.
// M104 (extruder without wait) - high temp = none, low temp = stop timer
// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
// M190 (bed with wait) - high temp = start timer, low temp = none
// //
// In all cases the timer can be started and stopped using // In all cases the timer can be started and stopped using
// the following commands: // the following commands:

5
Marlin/example_configurations/delta/kossel_xl/Configuration.h

@ -884,7 +884,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
// Print job timer // Print job timer
// //
// Enable this option to automatically start and stop the // Enable this option to automatically start and stop the
// print job timer when M104 and M109 commands are received. // print job timer when M104/M109/M190 commands are received.
// M104 (extruder without wait) - high temp = none, low temp = stop timer
// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
// M190 (bed with wait) - high temp = start timer, low temp = none
// //
// In all cases the timer can be started and stopped using // In all cases the timer can be started and stopped using
// the following commands: // the following commands:

5
Marlin/example_configurations/makibox/Configuration.h

@ -793,7 +793,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
// Print job timer // Print job timer
// //
// Enable this option to automatically start and stop the // Enable this option to automatically start and stop the
// print job timer when M104 and M109 commands are received. // print job timer when M104/M109/M190 commands are received.
// M104 (extruder without wait) - high temp = none, low temp = stop timer
// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
// M190 (bed with wait) - high temp = start timer, low temp = none
// //
// In all cases the timer can be started and stopped using // In all cases the timer can be started and stopped using
// the following commands: // the following commands:

5
Marlin/example_configurations/tvrrug/Round2/Configuration.h

@ -784,7 +784,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
// Print job timer // Print job timer
// //
// Enable this option to automatically start and stop the // Enable this option to automatically start and stop the
// print job timer when M104 and M109 commands are received. // print job timer when M104/M109/M190 commands are received.
// M104 (extruder without wait) - high temp = none, low temp = stop timer
// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
// M190 (bed with wait) - high temp = start timer, low temp = none
// //
// In all cases the timer can be started and stopped using // In all cases the timer can be started and stopped using
// the following commands: // the following commands:

Loading…
Cancel
Save