Browse Source

Fix auto bed leveling - turn on after successful G29

pull/1/head
Scott Lahteine 8 years ago
parent
commit
e0e0166075
  1. 30
      Marlin/Marlin_main.cpp

30
Marlin/Marlin_main.cpp

@ -3516,7 +3516,7 @@ inline void gcode_G28() {
stepper.synchronize(); stepper.synchronize();
// Disable auto bed leveling during G29 // Disable auto bed leveling during G29
bool abl_should_reenable = planner.abl_enabled; bool abl_should_enable = planner.abl_enabled;
planner.abl_enabled = false; planner.abl_enabled = false;
@ -3534,7 +3534,7 @@ inline void gcode_G28() {
// Deploy the probe. Probe will raise if needed. // Deploy the probe. Probe will raise if needed.
if (DEPLOY_PROBE()) { if (DEPLOY_PROBE()) {
planner.abl_enabled = abl_should_reenable; planner.abl_enabled = abl_should_enable;
return; return;
} }
@ -3555,7 +3555,7 @@ inline void gcode_G28() {
bilinear_grid_spacing[X_AXIS] = xGridSpacing; bilinear_grid_spacing[X_AXIS] = xGridSpacing;
bilinear_grid_spacing[Y_AXIS] = yGridSpacing; bilinear_grid_spacing[Y_AXIS] = yGridSpacing;
// Can't re-enable (on error) until the new grid is written // Can't re-enable (on error) until the new grid is written
abl_should_reenable = false; abl_should_enable = false;
} }
#elif ENABLED(AUTO_BED_LEVELING_LINEAR) #elif ENABLED(AUTO_BED_LEVELING_LINEAR)
@ -3617,7 +3617,7 @@ inline void gcode_G28() {
measured_z = probe_pt(xProbe, yProbe, stow_probe_after_each, verbose_level); measured_z = probe_pt(xProbe, yProbe, stow_probe_after_each, verbose_level);
if (measured_z == NAN) { if (measured_z == NAN) {
planner.abl_enabled = abl_should_reenable; planner.abl_enabled = abl_should_enable;
return; return;
} }
@ -3661,7 +3661,7 @@ inline void gcode_G28() {
} }
if (measured_z == NAN) { if (measured_z == NAN) {
planner.abl_enabled = abl_should_reenable; planner.abl_enabled = abl_should_enable;
return; return;
} }
@ -3675,14 +3675,14 @@ inline void gcode_G28() {
planner.bed_level_matrix = matrix_3x3::create_look_at(planeNormal); planner.bed_level_matrix = matrix_3x3::create_look_at(planeNormal);
// Can't re-enable (on error) until the new grid is written // Can't re-enable (on error) until the new grid is written
abl_should_reenable = false; abl_should_enable = false;
} }
#endif // AUTO_BED_LEVELING_3POINT #endif // AUTO_BED_LEVELING_3POINT
// Raise to _Z_CLEARANCE_DEPLOY_PROBE. Stow the probe. // Raise to _Z_CLEARANCE_DEPLOY_PROBE. Stow the probe.
if (STOW_PROBE()) { if (STOW_PROBE()) {
planner.abl_enabled = abl_should_reenable; planner.abl_enabled = abl_should_enable;
return; return;
} }
@ -3855,27 +3855,29 @@ inline void gcode_G28() {
current_position[Y_AXIS] = LOGICAL_Y_POSITION(y_dist) + Y_TILT_FULCRUM; current_position[Y_AXIS] = LOGICAL_Y_POSITION(y_dist) + Y_TILT_FULCRUM;
current_position[Z_AXIS] = new_z; current_position[Z_AXIS] = new_z;
SYNC_PLAN_POSITION_KINEMATIC();
#if ENABLED(DEBUG_LEVELING_FEATURE) #if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) DEBUG_POS("G29 corrected XYZ", current_position); if (DEBUGGING(LEVELING)) DEBUG_POS("G29 corrected XYZ", current_position);
#endif #endif
SYNC_PLAN_POSITION_KINEMATIC();
abl_should_enable = true;
} }
#elif ENABLED(AUTO_BED_LEVELING_BILINEAR) #elif ENABLED(AUTO_BED_LEVELING_BILINEAR)
if (!dryrun) { if (!dryrun) {
#if ENABLED(DEBUG_LEVELING_FEATURE) #if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) SERIAL_ECHOPAIR("G29 uncorrected Z:", current_position[Z_AXIS]); if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPAIR("G29 uncorrected Z:", current_position[Z_AXIS]);
#endif #endif
current_position[Z_AXIS] -= bilinear_z_offset(current_position); current_position[Z_AXIS] -= bilinear_z_offset(current_position);
SYNC_PLAN_POSITION_KINEMATIC();
#if ENABLED(DEBUG_LEVELING_FEATURE) #if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) SERIAL_ECHOPAIR("G29 corrected Z:", current_position[Z_AXIS]); if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPAIR(" corrected Z:", current_position[Z_AXIS]);
#endif #endif
SYNC_PLAN_POSITION_KINEMATIC();
abl_should_enable = true;
} }
#endif // ABL_PLANAR #endif // ABL_PLANAR
@ -3897,7 +3899,7 @@ inline void gcode_G28() {
KEEPALIVE_STATE(IN_HANDLER); KEEPALIVE_STATE(IN_HANDLER);
// Auto Bed Leveling is complete! Enable if possible. // Auto Bed Leveling is complete! Enable if possible.
planner.abl_enabled = dryrun ? abl_should_reenable : true; planner.abl_enabled = dryrun ? abl_should_enable : true;
} }
#endif // HAS_ABL #endif // HAS_ABL

Loading…
Cancel
Save