Browse Source

Code formatting in planner.cpp

pull/1/head
Scott Lahteine 8 years ago
parent
commit
ddde785b37
  1. 38
      Marlin/planner.cpp

38
Marlin/planner.cpp

@ -80,30 +80,31 @@ block_t Planner::block_buffer[BLOCK_BUFFER_SIZE];
volatile uint8_t Planner::block_buffer_head = 0; // Index of the next block to be pushed volatile uint8_t Planner::block_buffer_head = 0; // Index of the next block to be pushed
volatile uint8_t Planner::block_buffer_tail = 0; volatile uint8_t Planner::block_buffer_tail = 0;
float Planner::max_feedrate_mm_s[NUM_AXIS]; // Max speeds in mm per second float Planner::max_feedrate_mm_s[NUM_AXIS], // Max speeds in mm per second
float Planner::axis_steps_per_mm[NUM_AXIS]; Planner::axis_steps_per_mm[NUM_AXIS],
float Planner::steps_to_mm[NUM_AXIS]; Planner::steps_to_mm[NUM_AXIS];
unsigned long Planner::max_acceleration_steps_per_s2[NUM_AXIS];
unsigned long Planner::max_acceleration_mm_per_s2[NUM_AXIS]; // Use M201 to override by software unsigned long Planner::max_acceleration_steps_per_s2[NUM_AXIS],
Planner::max_acceleration_mm_per_s2[NUM_AXIS]; // Use M201 to override by software
millis_t Planner::min_segment_time; millis_t Planner::min_segment_time;
float Planner::min_feedrate_mm_s; float Planner::min_feedrate_mm_s,
float Planner::acceleration; // Normal acceleration mm/s^2 DEFAULT ACCELERATION for all printing moves. M204 SXXXX Planner::acceleration, // Normal acceleration mm/s^2 DEFAULT ACCELERATION for all printing moves. M204 SXXXX
float Planner::retract_acceleration; // Retract acceleration mm/s^2 filament pull-back and push-forward while standing still in the other axes M204 TXXXX Planner::retract_acceleration, // Retract acceleration mm/s^2 filament pull-back and push-forward while standing still in the other axes M204 TXXXX
float Planner::travel_acceleration; // Travel acceleration mm/s^2 DEFAULT ACCELERATION for all NON printing moves. M204 MXXXX Planner::travel_acceleration, // Travel acceleration mm/s^2 DEFAULT ACCELERATION for all NON printing moves. M204 MXXXX
float Planner::max_xy_jerk; // The largest speed change requiring no acceleration Planner::max_xy_jerk, // The largest speed change requiring no acceleration
float Planner::max_z_jerk; Planner::max_z_jerk,
float Planner::max_e_jerk; Planner::max_e_jerk,
float Planner::min_travel_feedrate_mm_s; Planner::min_travel_feedrate_mm_s;
#if ENABLED(AUTO_BED_LEVELING_FEATURE) #if ENABLED(AUTO_BED_LEVELING_FEATURE)
matrix_3x3 Planner::bed_level_matrix; // Transform to compensate for bed level matrix_3x3 Planner::bed_level_matrix; // Transform to compensate for bed level
#endif #endif
#if ENABLED(AUTOTEMP) #if ENABLED(AUTOTEMP)
float Planner::autotemp_max = 250; float Planner::autotemp_max = 250,
float Planner::autotemp_min = 210; Planner::autotemp_min = 210,
float Planner::autotemp_factor = 0.1; Planner::autotemp_factor = 0.1;
bool Planner::autotemp_enabled = false; bool Planner::autotemp_enabled = false;
#endif #endif
@ -111,9 +112,8 @@ float Planner::min_travel_feedrate_mm_s;
long Planner::position[NUM_AXIS] = { 0 }; long Planner::position[NUM_AXIS] = { 0 };
float Planner::previous_speed[NUM_AXIS]; float Planner::previous_speed[NUM_AXIS],
Planner::previous_nominal_speed;
float Planner::previous_nominal_speed;
#if ENABLED(DISABLE_INACTIVE_EXTRUDER) #if ENABLED(DISABLE_INACTIVE_EXTRUDER)
uint8_t Planner::g_uc_extruder_last_move[EXTRUDERS] = { 0 }; uint8_t Planner::g_uc_extruder_last_move[EXTRUDERS] = { 0 };

Loading…
Cancel
Save