Browse Source

Merge remote-tracking branch 'upstream/Development' into Development

Latest upstream commits
pull/1/head
Scott Lahteine 10 years ago
parent
commit
dcde09fdff
  1. 43
      Marlin/Conditionals.h
  2. 2
      Marlin/Configuration.h
  3. 4
      Marlin/ConfigurationStore.cpp
  4. 14
      Marlin/Marlin_main.cpp
  5. 3
      Marlin/SanityCheck.h
  6. 16
      Marlin/dogm_lcd_implementation.h
  7. 12
      Marlin/ultralcd_implementation_hitachi_HD44780.h

43
Marlin/Conditionals.h

@ -143,16 +143,45 @@
#endif
#else //no panel but just LCD
#ifdef ULTRA_LCD
#ifdef DOGLCD // Change number of lines to match the 128x64 graphics display
#define LCD_WIDTH 22
#define LCD_HEIGHT 5
#else
#define LCD_WIDTH 16
#define LCD_HEIGHT 2
#endif
#ifdef DOGLCD // Change number of lines to match the 128x64 graphics display
#define LCD_WIDTH 22
#define LCD_HEIGHT 5
#else
#define LCD_WIDTH 16
#define LCD_HEIGHT 2
#endif
#endif
#endif
#ifdef DOGLCD
/* Custom characters defined in font font_6x10_marlin_symbols */
// \x00 intentionally skipped to avoid problems in strings
#define LCD_STR_REFRESH "\x01"
#define LCD_STR_FOLDER "\x02"
#define LCD_STR_ARROW_RIGHT "\x03"
#define LCD_STR_UPLEVEL "\x04"
#define LCD_STR_CLOCK "\x05"
#define LCD_STR_FEEDRATE "\x06"
#define LCD_STR_BEDTEMP "\x07"
#define LCD_STR_THERMOMETER "\x08"
#define LCD_STR_DEGREE "\x09"
#define LCD_STR_SPECIAL_MAX '\x09'
// Maximum here is 0x1f because 0x20 is ' ' (space) and the normal charsets begin.
// Better stay below 0x10 because DISPLAY_CHARSET_HD44780_WESTERN begins here.
#else
/* Custom characters defined in the first 8 characters of the LCD */
#define LCD_STR_BEDTEMP "\x00" // this will have 'unexpected' results when used in a string!
#define LCD_STR_DEGREE "\x01"
#define LCD_STR_THERMOMETER "\x02"
#define LCD_STR_UPLEVEL "\x03"
#define LCD_STR_REFRESH "\x04"
#define LCD_STR_FOLDER "\x05"
#define LCD_STR_FEEDRATE "\x06"
#define LCD_STR_CLOCK "\x07"
#define LCD_STR_ARROW_RIGHT ">" /* from the default character set */
#endif
/**
* Default LCD contrast for dogm-like LCD displays
*/

2
Marlin/Configuration.h

@ -420,7 +420,7 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic
//#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
//===========================================================================
//============================ Manual Bed Leveling ==========================
//============================ Mesh Bed Leveling ============================
//===========================================================================
// #define MANUAL_BED_LEVELING // Add display menu option for bed leveling

4
Marlin/ConfigurationStore.cpp

@ -669,7 +669,7 @@ void Config_PrintSettings(bool forReplay) {
#ifdef DELTA
SERIAL_ECHO_START;
if (!forReplay) {
SERIAL_ECHOLNPGM("Endstop adjustement (mm):");
SERIAL_ECHOLNPGM("Endstop adjustment (mm):");
SERIAL_ECHO_START;
}
SERIAL_ECHOPAIR(" M666 X", endstop_adj[X_AXIS] );
@ -686,7 +686,7 @@ void Config_PrintSettings(bool forReplay) {
#elif defined(Z_DUAL_ENDSTOPS)
SERIAL_ECHO_START;
if (!forReplay) {
SERIAL_ECHOLNPGM("Z2 Endstop adjustement (mm):");
SERIAL_ECHOLNPGM("Z2 Endstop adjustment (mm):");
SERIAL_ECHO_START;
}
SERIAL_ECHOPAIR(" M666 Z", z_endstop_adj );

14
Marlin/Marlin_main.cpp

@ -1369,7 +1369,7 @@ inline void set_destination_to_current() { memcpy(destination, current_position,
#endif
if (verbose_level > 2) {
SERIAL_PROTOCOLPGM(MSG_BED);
SERIAL_PROTOCOLPGM("Bed");
SERIAL_PROTOCOLPGM(" X: ");
SERIAL_PROTOCOL_F(x, 3);
SERIAL_PROTOCOLPGM(" Y: ");
@ -2518,7 +2518,7 @@ inline void gcode_G28() {
feedrate = homing_feedrate[Z_AXIS];
run_z_probe();
SERIAL_PROTOCOLPGM(MSG_BED);
SERIAL_PROTOCOLPGM("Bed");
SERIAL_PROTOCOLPGM(" X: ");
SERIAL_PROTOCOL(current_position[X_AXIS] + 0.0001);
SERIAL_PROTOCOLPGM(" Y: ");
@ -2856,7 +2856,7 @@ inline void gcode_M42() {
inline void gcode_M48() {
double sum = 0.0, mean = 0.0, sigma = 0.0, sample_set[50];
int verbose_level = 1, n_samples = 10, n_legs = 0;
uint8_t verbose_level = 1, n_samples = 10, n_legs = 0;
if (code_seen('V') || code_seen('v')) {
verbose_level = code_value_short();
@ -2964,7 +2964,7 @@ inline void gcode_M42() {
if (deploy_probe_for_each_reading) stow_z_probe();
for (uint16_t n=0; n < n_samples; n++) {
for (uint8_t n=0; n < n_samples; n++) {
do_blocking_move_to(X_probe_location, Y_probe_location, Z_start_location); // Make sure we are at the probe location
@ -2979,7 +2979,7 @@ inline void gcode_M42() {
//SERIAL_ECHOPAIR(" direction: ",dir);
//SERIAL_EOL;
for (int l = 0; l < n_legs - 1; l++) {
for (uint8_t l = 0; l < n_legs - 1; l++) {
ms = millis();
theta += RADIANS(dir * (ms % 20L));
radius += (ms % 10L) - 5L;
@ -3018,7 +3018,7 @@ inline void gcode_M42() {
// Get the current mean for the data points we have so far
//
sum = 0.0;
for (int j = 0; j <= n; j++) sum += sample_set[j];
for (uint8_t j = 0; j <= n; j++) sum += sample_set[j];
mean = sum / (n + 1);
//
@ -3026,7 +3026,7 @@ inline void gcode_M42() {
// data points we have so far
//
sum = 0.0;
for (int j = 0; j <= n; j++) {
for (uint8_t j = 0; j <= n; j++) {
float ss = sample_set[j] - mean;
sum += ss * ss;
}

3
Marlin/SanityCheck.h

@ -101,6 +101,9 @@
#ifdef ENABLE_AUTO_BED_LEVELING
#error Select ENABLE_AUTO_BED_LEVELING or MESH_BED_LEVELING, not both
#endif
#if MESH_NUM_X_POINTS > 7 || MESH_NUM_Y_POINTS > 7
#error MESH_NUM_X_POINTS and MESH_NUM_Y_POINTS need to be less than 8
#endif
#endif
/**

16
Marlin/dogm_lcd_implementation.h

@ -108,22 +108,6 @@
#define START_ROW 0
/* Custom characters defined in font font_6x10_marlin_symbols */
// \x00 intentionally skipped to avoid problems in strings
#define LCD_STR_REFRESH "\x01"
#define LCD_STR_FOLDER "\x02"
#define LCD_STR_ARROW_RIGHT "\x03"
#define LCD_STR_UPLEVEL "\x04"
#define LCD_STR_CLOCK "\x05"
#define LCD_STR_FEEDRATE "\x06"
#define LCD_STR_BEDTEMP "\x07"
#define LCD_STR_THERMOMETER "\x08"
#define LCD_STR_DEGREE "\x09"
#define LCD_STR_SPECIAL_MAX '\x09'
// Maximum here is 0x1f because 0x20 is ' ' (space) and the normal charsets begin.
// Better stay below 0x10 because DISPLAY_CHARSET_HD44780_WESTERN begins here.
// LCD selection
#ifdef U8GLIB_ST7920
//U8GLIB_ST7920_128X64_RRD u8g(0,0,0);

12
Marlin/ultralcd_implementation_hitachi_HD44780.h

@ -201,18 +201,6 @@
#define LCD_STR_PROGRESS "\x03\x04\x05"
#endif
/* Custom characters defined in the first 8 characters of the LCD */
#define LCD_STR_BEDTEMP "\x00" // this will have 'unexpected' results when used in a string!
#define LCD_STR_DEGREE "\x01"
#define LCD_STR_THERMOMETER "\x02"
#define LCD_STR_UPLEVEL "\x03"
#define LCD_STR_REFRESH "\x04"
#define LCD_STR_FOLDER "\x05"
#define LCD_STR_FEEDRATE "\x06"
#define LCD_STR_CLOCK "\x07"
//#define LCD_STR_ARROW_RIGHT "\x7E" /* from the default character set. Only available on DISPLAY_CHARSET_HD44780_JAPAN - at this place!*/
#define LCD_STR_ARROW_RIGHT ">" /* from the default character set */
static void lcd_set_custom_characters(
#ifdef LCD_PROGRESS_BAR
bool progress_bar_set=true

Loading…
Cancel
Save