Bob Kuhn
6 years ago
committed by
Scott Lahteine
Scott Lahteine
15 changed files with 1173 additions and 151 deletions
@ -1 +1,34 @@ |
|||||
#error "PINS_DEBUGGING is not yet supported for STM32!" |
/**
|
||||
|
* Marlin 3D Printer Firmware |
||||
|
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
|
* |
||||
|
* This program is free software: you can redistribute it and/or modify |
||||
|
* it under the terms of the GNU General Public License as published by |
||||
|
* the Free Software Foundation, either version 3 of the License, or |
||||
|
* (at your option) any later version. |
||||
|
* |
||||
|
* This program is distributed in the hope that it will be useful, |
||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
|
* GNU General Public License for more details. |
||||
|
* |
||||
|
* You should have received a copy of the GNU General Public License |
||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
|
* |
||||
|
*/ |
||||
|
#pragma once |
||||
|
|
||||
|
#if !(defined(NUM_DIGITAL_PINS) || defined(BOARD_NR_GPIO_PINS)) |
||||
|
#error "M43 not supported for this board" |
||||
|
#endif |
||||
|
|
||||
|
// Strange - STM32F4 comes to HAL_STM32 rather than HAL_STM32F4 for these files
|
||||
|
#ifdef STM32F4 |
||||
|
#ifdef NUM_DIGITAL_PINS // Only in ST's Arduino core (STM32duino, STM32Core)
|
||||
|
#include "pinsDebug_STM32duino.h" |
||||
|
#elif defined(BOARD_NR_GPIO_PINS) // Only in STM32GENERIC (Maple)
|
||||
|
#include "pinsDebug_STM32GENERIC.h" |
||||
|
#else |
||||
|
#error "M43 not supported for this board" |
||||
|
#endif |
||||
|
#endif |
||||
|
|||||
@ -0,0 +1,138 @@ |
|||||
|
/**
|
||||
|
* Marlin 3D Printer Firmware |
||||
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
|
* |
||||
|
* This program is free software: you can redistribute it and/or modify |
||||
|
* it under the terms of the GNU General Public License as published by |
||||
|
* the Free Software Foundation, either version 3 of the License, or |
||||
|
* (at your option) any later version. |
||||
|
* |
||||
|
* This program is distributed in the hope that it will be useful, |
||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
|
* GNU General Public License for more details. |
||||
|
* |
||||
|
* You should have received a copy of the GNU General Public License |
||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
|
* |
||||
|
*/ |
||||
|
#pragma once |
||||
|
|
||||
|
/**
|
||||
|
* Support routines for STM32GENERIC (Maple) |
||||
|
*/ |
||||
|
|
||||
|
/**
|
||||
|
* Translation of routines & variables used by pinsDebug.h |
||||
|
*/ |
||||
|
|
||||
|
#ifdef BOARD_NR_GPIO_PINS // Only in STM32GENERIC (Maple)
|
||||
|
|
||||
|
#ifdef __STM32F1__ |
||||
|
#include "../HAL_STM32F1/fastio_STM32F1.h" |
||||
|
#elif defined(STM32F4) |
||||
|
#include "../HAL_STM32F4/fastio_STM32F4.h" |
||||
|
#elif defined(STM32F7) |
||||
|
#include "../HAL_STM32F7/fastio_STM32F7.h" |
||||
|
#endif |
||||
|
|
||||
|
extern const stm32_pin_info PIN_MAP[BOARD_NR_GPIO_PINS]; |
||||
|
|
||||
|
#define NUM_DIGITAL_PINS BOARD_NR_GPIO_PINS |
||||
|
#define NUMBER_PINS_TOTAL BOARD_NR_GPIO_PINS |
||||
|
#define VALID_PIN(pin) (pin >= 0 && pin < BOARD_NR_GPIO_PINS) |
||||
|
#define GET_ARRAY_PIN(p) pin_t(pin_array[p].pin) |
||||
|
#define pwm_status(pin) PWM_PIN(pin) |
||||
|
#define digitalRead_mod(p) extDigitalRead(p) |
||||
|
#define NAME_FORMAT(p) PSTR("%-##p##s") |
||||
|
#define PRINT_PIN(p) do{ sprintf_P(buffer, PSTR("%3hd "), int16_t(p)); SERIAL_ECHO(buffer); }while(0) |
||||
|
#define PRINT_PORT(p) print_port(p) |
||||
|
#define PRINT_ARRAY_NAME(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0) |
||||
|
#define MULTI_NAME_PAD 20 // space needed to be pretty if not first name assigned to a pin
|
||||
|
|
||||
|
// pins that will cause hang/reset/disconnect in M43 Toggle and Watch utilities
|
||||
|
#ifndef M43_NEVER_TOUCH |
||||
|
#define M43_NEVER_TOUCH(Q) (Q >= 9 && Q <= 12) // SERIAL/USB pins PA9(TX) PA10(RX)
|
||||
|
#endif |
||||
|
|
||||
|
static inline int8_t get_pin_mode(pin_t pin) { |
||||
|
return VALID_PIN(pin) ? _GET_MODE(pin) : -1; |
||||
|
} |
||||
|
|
||||
|
static inline pin_t DIGITAL_PIN_TO_ANALOG_PIN(pin_t pin) { |
||||
|
if (!VALID_PIN(pin)) return -1; |
||||
|
int8_t adc_channel = int8_t(PIN_MAP[pin].adc_channel); |
||||
|
#ifdef NUM_ANALOG_INPUTS |
||||
|
if (adc_channel >= NUM_ANALOG_INPUTS) adc_channel = ADCx; |
||||
|
#endif |
||||
|
return pin_t(adc_channel); |
||||
|
} |
||||
|
|
||||
|
static inline bool IS_ANALOG(pin_t pin) { |
||||
|
if (!VALID_PIN(pin)) return false; |
||||
|
if (PIN_MAP[pin].adc_channel != ADCx) { |
||||
|
#ifdef NUM_ANALOG_INPUTS |
||||
|
if (PIN_MAP[pin].adc_channel >= NUM_ANALOG_INPUTS) return false; |
||||
|
#endif |
||||
|
return _GET_MODE(pin) == GPIO_INPUT_ANALOG && !M43_NEVER_TOUCH(pin); |
||||
|
} |
||||
|
return false; |
||||
|
} |
||||
|
|
||||
|
static inline bool GET_PINMODE(const pin_t pin) { |
||||
|
return VALID_PIN(pin) && !IS_INPUT(pin); |
||||
|
} |
||||
|
|
||||
|
static inline bool GET_ARRAY_IS_DIGITAL(const int16_t array_pin) { |
||||
|
const pin_t pin = GET_ARRAY_PIN(array_pin); |
||||
|
return (!IS_ANALOG(pin) |
||||
|
#ifdef NUM_ANALOG_INPUTS |
||||
|
|| PIN_MAP[pin].adc_channel >= NUM_ANALOG_INPUTS |
||||
|
#endif |
||||
|
); |
||||
|
} |
||||
|
|
||||
|
static inline void pwm_details(const pin_t pin) { |
||||
|
if (PWM_PIN(pin)) { |
||||
|
timer_dev * const tdev = PIN_MAP[pin].timer_device; |
||||
|
const uint8_t channel = PIN_MAP[pin].timer_channel; |
||||
|
const char num = ( |
||||
|
#ifdef STM32_HIGH_DENSITY |
||||
|
tdev == &timer8 ? '8' : |
||||
|
tdev == &timer5 ? '5' : |
||||
|
#endif |
||||
|
tdev == &timer4 ? '4' : |
||||
|
tdev == &timer3 ? '3' : |
||||
|
tdev == &timer2 ? '2' : |
||||
|
tdev == &timer1 ? '1' : '?' |
||||
|
); |
||||
|
char buffer[10]; |
||||
|
sprintf_P(buffer, PSTR(" TIM%c CH%c"), num, ('0' + channel)); |
||||
|
SERIAL_ECHO(buffer); |
||||
|
} |
||||
|
} |
||||
|
|
||||
|
static inline void print_port(pin_t pin) { |
||||
|
const char port = 'A' + char(pin >> 4); // pin div 16
|
||||
|
/* seems not to be required for our devices
|
||||
|
gpio_dev * const gp = PIN_MAP[pin].gpio_device; |
||||
|
const char port = ( |
||||
|
#if STM32_NR_GPIO_PORTS > 4 |
||||
|
gp == &gpiog ? 'G' : |
||||
|
gp == &gpiof ? 'F' : |
||||
|
gp == &gpioe ? 'E' : |
||||
|
#endif |
||||
|
gp == &gpiod ? 'D' : |
||||
|
gp == &gpioc ? 'C' : |
||||
|
gp == &gpiob ? 'B' : |
||||
|
gp == &gpioa ? 'A' : '?' |
||||
|
); |
||||
|
*/ |
||||
|
const int16_t gbit = PIN_MAP[pin].gpio_bit; |
||||
|
char buffer[6]; |
||||
|
sprintf_P(buffer, PSTR("P%c%hd "), port, gbit); |
||||
|
if (gbit < 10) SERIAL_CHAR(' '); |
||||
|
SERIAL_ECHO(buffer); |
||||
|
} |
||||
|
|
||||
|
#endif // BOARD_NR_GPIO_PINS
|
||||
@ -0,0 +1,276 @@ |
|||||
|
/**
|
||||
|
* Marlin 3D Printer Firmware |
||||
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
|
* |
||||
|
* This program is free software: you can redistribute it and/or modify |
||||
|
* it under the terms of the GNU General Public License as published by |
||||
|
* the Free Software Foundation, either version 3 of the License, or |
||||
|
* (at your option) any later version. |
||||
|
* |
||||
|
* This program is distributed in the hope that it will be useful, |
||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
|
* GNU General Public License for more details. |
||||
|
* |
||||
|
* You should have received a copy of the GNU General Public License |
||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
|
* |
||||
|
*/ |
||||
|
#pragma once |
||||
|
|
||||
|
#include <Arduino.h> |
||||
|
|
||||
|
#ifdef NUM_DIGITAL_PINS // Only in ST's Arduino core (STM32duino, STM32Core)
|
||||
|
|
||||
|
/**
|
||||
|
* Life gets complicated if you want an easy to use 'M43 I' output (in port/pin order) |
||||
|
* because the variants in this platform do not always define all the I/O port/pins |
||||
|
* that a CPU has. |
||||
|
* |
||||
|
* VARIABLES: |
||||
|
* Ard_num - Arduino pin number - defined by the platform. It is used by digitalRead and |
||||
|
* digitalWrite commands and by M42. |
||||
|
* - does not contain port/pin info |
||||
|
* - is not in port/pin order |
||||
|
* - typically a variant will only assign Ard_num to port/pins that are actually used |
||||
|
* Index - M43 counter - only used to get Ard_num |
||||
|
* x - a parameter/argument used to search the pin_array to try to find a signal name |
||||
|
* associated with a Ard_num |
||||
|
* Port_pin - port number and pin number for use with CPU registers and printing reports |
||||
|
* |
||||
|
* Since M43 uses digitalRead and digitalWrite commands, only the Port_pins with an Ard_num |
||||
|
* are accessed and/or displayed. |
||||
|
* |
||||
|
* Three arrays are used. |
||||
|
* |
||||
|
* digitalPin[] is provided by the platform. It consists of the Port_pin numbers in |
||||
|
* Arduino pin number order. |
||||
|
* |
||||
|
* pin_array is a structure generated by the pins/pinsDebug.h header file. It is generated by |
||||
|
* the preprocessor. Only the signals associated with enabled options are in this table. |
||||
|
* It contains: |
||||
|
* - name of the signal |
||||
|
* - the Ard_num assigned by the pins_YOUR_BOARD.h file using the platform defines. |
||||
|
* EXAMPLE: "#define KILL_PIN PB1" results in Ard_num of 57. 57 is then used as an |
||||
|
* index into digitalPin[] to get the Port_pin number |
||||
|
* - if it is a digital or analog signal. PWMs are considered digital here. |
||||
|
* |
||||
|
* pin_xref is a structure generated by this header file. It is generated by the |
||||
|
* preprocessor. It is in port/pin order. It contains just the port/pin numbers defined by the |
||||
|
* platform for this variant. |
||||
|
* - Ard_num |
||||
|
* - printable version of Port_pin |
||||
|
* |
||||
|
* Routines with an "x" as a parameter/argument are used to search the pin_array to try to |
||||
|
* find a signal name associated with a port/pin. |
||||
|
* |
||||
|
* NOTE - the Arduino pin number is what is used by the M42 command, NOT the port/pin for that |
||||
|
* signal. The Arduino pin number is listed by the M43 I command. |
||||
|
*/ |
||||
|
|
||||
|
extern const PinName digitalPin[]; // provided by the platform
|
||||
|
|
||||
|
////////////////////////////////////////////////////////
|
||||
|
//
|
||||
|
// make a list of the Arduino pin numbers in the Port/Pin order
|
||||
|
//
|
||||
|
|
||||
|
#define _PIN_ADD_2(NAME_ALPHA, ARDUINO_NUM) { {NAME_ALPHA}, ARDUINO_NUM }, |
||||
|
#define _PIN_ADD(NAME_ALPHA, ARDUINO_NUM) { NAME_ALPHA, ARDUINO_NUM }, |
||||
|
#define PIN_ADD(NAME) _PIN_ADD(#NAME, NAME) |
||||
|
|
||||
|
typedef struct { |
||||
|
char Port_pin_alpha[5]; |
||||
|
pin_t Ard_num; |
||||
|
} XrefInfo; |
||||
|
|
||||
|
const XrefInfo pin_xref[] PROGMEM = { |
||||
|
#include "pins_Xref.h" |
||||
|
}; |
||||
|
|
||||
|
////////////////////////////////////////////////////////////
|
||||
|
|
||||
|
#define MODE_PIN_INPUT 0 // Input mode (reset state)
|
||||
|
#define MODE_PIN_OUTPUT 1 // General purpose output mode
|
||||
|
#define MODE_PIN_ALT 2 // Alternate function mode
|
||||
|
#define MODE_PIN_ANALOG 3 // Analog mode
|
||||
|
|
||||
|
#define PIN_NUM(P) (P & 0x000F) |
||||
|
#define PIN_NUM_ALPHA_LEFT(P) (((P & 0x000F) < 10) ? ('0' + (P & 0x000F)) : '1') |
||||
|
#define PIN_NUM_ALPHA_RIGHT(P) (((P & 0x000F) > 9) ? ('0' + (P & 0x000F) - 10) : 0 ) |
||||
|
#define PORT_NUM(P) ((P >> 4) & 0x0007) |
||||
|
#define PORT_ALPHA(P) ('A' + (P >> 4)) |
||||
|
|
||||
|
/**
|
||||
|
* Translation of routines & variables used by pinsDebug.h |
||||
|
*/ |
||||
|
#define NUMBER_PINS_TOTAL NUM_DIGITAL_PINS |
||||
|
#define VALID_PIN(ANUM) ((ANUM) >= 0 && (ANUM) < NUMBER_PINS_TOTAL) |
||||
|
#define digitalRead_mod(Ard_num) extDigitalRead(Ard_num) // must use Arduino pin numbers when doing reads
|
||||
|
#define NAME_FORMAT(p) PSTR("%-##p##s") |
||||
|
#define PRINT_PIN(Q) |
||||
|
#define PRINT_PORT(ANUM) port_print(ANUM) |
||||
|
#define DIGITAL_PIN_TO_ANALOG_PIN(ANUM) -1 // will report analog pin number in the print port routine
|
||||
|
#define GET_PIN_MAP_PIN_M43(Index) pin_xref[Index].Ard_num |
||||
|
|
||||
|
// x is a variable used to search pin_array
|
||||
|
#define GET_ARRAY_IS_DIGITAL(x) ((bool) pin_array[x].is_digital) |
||||
|
#define GET_ARRAY_PIN(x) ((pin_t) pin_array[x].pin) |
||||
|
#define PRINT_ARRAY_NAME(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0) |
||||
|
#define MULTI_NAME_PAD 33 // space needed to be pretty if not first name assigned to a pin
|
||||
|
|
||||
|
#ifndef M43_NEVER_TOUCH |
||||
|
#define _M43_NEVER_TOUCH(Index) (Index >= 9 && Index <= 12) // SERIAL/USB pins: PA9(TX) PA10(RX) PA11(USB_DM) PA12(USB_DP)
|
||||
|
#ifdef KILL_PIN |
||||
|
#define M43_NEVER_TOUCH(Index) m43_never_touch(Index) |
||||
|
|
||||
|
bool m43_never_touch(const pin_t Index) { |
||||
|
static pin_t M43_kill_index = -1; |
||||
|
if (M43_kill_index < 0) |
||||
|
for (M43_kill_index = 0; M43_kill_index < NUMBER_PINS_TOTAL; M43_kill_index++) |
||||
|
if (KILL_PIN == GET_PIN_MAP_PIN_M43(M43_kill_index)) break; |
||||
|
return _M43_NEVER_TOUCH(Index) || Index == M43_kill_index; // KILL_PIN and SERIAL/USB
|
||||
|
} |
||||
|
#else |
||||
|
#define M43_NEVER_TOUCH(Index) _M43_NEVER_TOUCH(Index) |
||||
|
#endif |
||||
|
#endif |
||||
|
|
||||
|
uint8_t get_pin_mode(const pin_t Ard_num) { |
||||
|
uint32_t mode_all = 0; |
||||
|
const PinName dp = digitalPin[Ard_num]; |
||||
|
switch (PORT_ALPHA(dp)) { |
||||
|
case 'A' : mode_all = GPIOA->MODER; break; |
||||
|
case 'B' : mode_all = GPIOB->MODER; break; |
||||
|
case 'C' : mode_all = GPIOC->MODER; break; |
||||
|
case 'D' : mode_all = GPIOD->MODER; break; |
||||
|
#ifdef PE_0 |
||||
|
case 'E' : mode_all = GPIOE->MODER; break; |
||||
|
#elif defined (PF_0) |
||||
|
case 'F' : mode_all = GPIOF->MODER; break; |
||||
|
#elif defined (PG_0) |
||||
|
case 'G' : mode_all = GPIOG->MODER; break; |
||||
|
#elif defined (PH_0) |
||||
|
case 'H' : mode_all = GPIOH->MODER; break; |
||||
|
#elif defined (PI_0) |
||||
|
case 'I' : mode_all = GPIOI->MODER; break; |
||||
|
#elif defined (PJ_0) |
||||
|
case 'J' : mode_all = GPIOJ->MODER; break; |
||||
|
#elif defined (PK_0) |
||||
|
case 'K' : mode_all = GPIOK->MODER; break; |
||||
|
#elif defined (PL_0) |
||||
|
case 'L' : mode_all = GPIOL->MODER; break; |
||||
|
#endif |
||||
|
} |
||||
|
return (mode_all >> (2 * uint8_t(PIN_NUM(dp)))) & 0x03; |
||||
|
} |
||||
|
|
||||
|
bool GET_PINMODE(const pin_t Ard_num) { |
||||
|
const uint8_t pin_mode = get_pin_mode(Ard_num); |
||||
|
return pin_mode == MODE_PIN_OUTPUT || pin_mode == MODE_PIN_ALT; // assume all alt definitions are PWM
|
||||
|
} |
||||
|
|
||||
|
int8_t digital_pin_to_analog_pin(pin_t Ard_num) { |
||||
|
Ard_num -= NUM_ANALOG_FIRST; |
||||
|
return (Ard_num >= 0 && Ard_num < NUM_ANALOG_INPUTS) ? Ard_num : -1; |
||||
|
} |
||||
|
|
||||
|
bool IS_ANALOG(const pin_t Ard_num) { |
||||
|
return get_pin_mode(Ard_num) == MODE_PIN_ANALOG; |
||||
|
} |
||||
|
|
||||
|
bool is_digital(const pin_t x) { |
||||
|
const uint8_t pin_mode = get_pin_mode(pin_array[x].pin); |
||||
|
return pin_mode == MODE_PIN_INPUT || pin_mode == MODE_PIN_OUTPUT; |
||||
|
} |
||||
|
|
||||
|
void port_print(const pin_t Ard_num) { |
||||
|
char buffer[16]; |
||||
|
pin_t Index; |
||||
|
for (Index = 0; Index < NUMBER_PINS_TOTAL; Index++) |
||||
|
if (Ard_num == GET_PIN_MAP_PIN_M43(Index)) break; |
||||
|
|
||||
|
char * const ppa = pin_xref[Index].Port_pin_alpha; |
||||
|
sprintf_P(buffer, PSTR("%s"), ppa); |
||||
|
SERIAL_ECHO(buffer); |
||||
|
if (ppa[3] == '\0') SERIAL_CHAR(' '); |
||||
|
|
||||
|
// print analog pin number
|
||||
|
const int8_t Port_pin = digital_pin_to_analog_pin(Ard_num); |
||||
|
if (Port_pin >= 0) { |
||||
|
sprintf_P(buffer, PSTR(" (A%d) "), Port_pin); |
||||
|
SERIAL_ECHO(buffer); |
||||
|
if (Port_pin < 10) SERIAL_CHAR(' '); |
||||
|
} |
||||
|
else |
||||
|
SERIAL_ECHO_SP(7); |
||||
|
|
||||
|
// Print number to be used with M42
|
||||
|
sprintf_P(buffer, PSTR(" M42 P%d "), Ard_num); |
||||
|
SERIAL_ECHO(buffer); |
||||
|
if (Ard_num < 10) SERIAL_CHAR(' '); |
||||
|
if (Ard_num < 100) SERIAL_CHAR(' '); |
||||
|
} |
||||
|
|
||||
|
bool pwm_status(const pin_t Ard_num) { |
||||
|
return get_pin_mode(Ard_num) == MODE_PIN_ALT; |
||||
|
} |
||||
|
|
||||
|
void pwm_details(const pin_t Ard_num) { |
||||
|
if (pwm_status(Ard_num)) { |
||||
|
uint32_t alt_all = 0; |
||||
|
const PinName dp = digitalPin[Ard_num]; |
||||
|
pin_t pin_number = uint8_t(PIN_NUM(dp)); |
||||
|
const bool over_7 = pin_number >= 8; |
||||
|
const uint8_t ind = over_7 ? 1 : 0; |
||||
|
switch (PORT_ALPHA(dp)) { // get alt function
|
||||
|
case 'A' : alt_all = GPIOA->AFR[ind]; break; |
||||
|
case 'B' : alt_all = GPIOB->AFR[ind]; break; |
||||
|
case 'C' : alt_all = GPIOC->AFR[ind]; break; |
||||
|
case 'D' : alt_all = GPIOD->AFR[ind]; break; |
||||
|
#ifdef PE_0 |
||||
|
case 'E' : alt_all = GPIOE->AFR[ind]; break; |
||||
|
#elif defined (PF_0) |
||||
|
case 'F' : alt_all = GPIOF->AFR[ind]; break; |
||||
|
#elif defined (PG_0) |
||||
|
case 'G' : alt_all = GPIOG->AFR[ind]; break; |
||||
|
#elif defined (PH_0) |
||||
|
case 'H' : alt_all = GPIOH->AFR[ind]; break; |
||||
|
#elif defined (PI_0) |
||||
|
case 'I' : alt_all = GPIOI->AFR[ind]; break; |
||||
|
#elif defined (PJ_0) |
||||
|
case 'J' : alt_all = GPIOJ->AFR[ind]; break; |
||||
|
#elif defined (PK_0) |
||||
|
case 'K' : alt_all = GPIOK->AFR[ind]; break; |
||||
|
#elif defined (PL_0) |
||||
|
case 'L' : alt_all = GPIOL->AFR[ind]; break; |
||||
|
#endif |
||||
|
} |
||||
|
if (over_7) pin_number -= 8; |
||||
|
|
||||
|
uint8_t alt_func = (alt_all >> (4 * pin_number)) & 0x0F; |
||||
|
SERIAL_ECHOPAIR("Alt Function: ", alt_func); |
||||
|
if (alt_func < 10) SERIAL_CHAR(' '); |
||||
|
SERIAL_ECHOPGM(" - "); |
||||
|
switch (alt_func) { |
||||
|
case 0 : SERIAL_ECHOPGM("system (misc. I/O)"); break; |
||||
|
case 1 : SERIAL_ECHOPGM("TIM1/TIM2 (probably PWM)"); break; |
||||
|
case 2 : SERIAL_ECHOPGM("TIM3..5 (probably PWM)"); break; |
||||
|
case 3 : SERIAL_ECHOPGM("TIM8..11 (probably PWM)"); break; |
||||
|
case 4 : SERIAL_ECHOPGM("I2C1..3"); break; |
||||
|
case 5 : SERIAL_ECHOPGM("SPI1/SPI2"); break; |
||||
|
case 6 : SERIAL_ECHOPGM("SPI3"); break; |
||||
|
case 7 : SERIAL_ECHOPGM("USART1..3"); break; |
||||
|
case 8 : SERIAL_ECHOPGM("USART4..6"); break; |
||||
|
case 9 : SERIAL_ECHOPGM("CAN1/CAN2, TIM12..14 (probably PWM)"); break; |
||||
|
case 10 : SERIAL_ECHOPGM("OTG"); break; |
||||
|
case 11 : SERIAL_ECHOPGM("ETH"); break; |
||||
|
case 12 : SERIAL_ECHOPGM("FSMC, SDIO, OTG"); break; |
||||
|
case 13 : SERIAL_ECHOPGM("DCMI"); break; |
||||
|
case 14 : SERIAL_ECHOPGM("unused (shouldn't see this)"); break; |
||||
|
case 15 : SERIAL_ECHOPGM("EVENTOUT"); break; |
||||
|
} |
||||
|
} |
||||
|
} // pwm_details
|
||||
|
|
||||
|
#endif // NUM_DIGITAL_PINS
|
||||
@ -0,0 +1,612 @@ |
|||||
|
/**
|
||||
|
* Marlin 3D Printer Firmware |
||||
|
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
|
* |
||||
|
* Based on Sprinter and grbl. |
||||
|
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm |
||||
|
* |
||||
|
* This program is free software: you can redistribute it and/or modify |
||||
|
* it under the terms of the GNU General Public License as published by |
||||
|
* the Free Software Foundation, either version 3 of the License, or |
||||
|
* (at your option) any later version. |
||||
|
* |
||||
|
* This program is distributed in the hope that it will be useful, |
||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
|
* GNU General Public License for more details. |
||||
|
* |
||||
|
* You should have received a copy of the GNU General Public License |
||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
|
* |
||||
|
*/ |
||||
|
|
||||
|
//
|
||||
|
// make a list of the Arduino pin numbers in the Port/Pin order
|
||||
|
//
|
||||
|
#ifdef PA0 |
||||
|
PIN_ADD(PA0) |
||||
|
#endif |
||||
|
#ifdef PA1 |
||||
|
PIN_ADD(PA1) |
||||
|
#endif |
||||
|
#ifdef PA2 |
||||
|
PIN_ADD(PA2) |
||||
|
#endif |
||||
|
#ifdef PA3 |
||||
|
PIN_ADD(PA3) |
||||
|
#endif |
||||
|
#ifdef PA4 |
||||
|
PIN_ADD(PA4) |
||||
|
#endif |
||||
|
#ifdef PA5 |
||||
|
PIN_ADD(PA5) |
||||
|
#endif |
||||
|
#ifdef PA6 |
||||
|
PIN_ADD(PA6) |
||||
|
#endif |
||||
|
#ifdef PA7 |
||||
|
PIN_ADD(PA7) |
||||
|
#endif |
||||
|
#ifdef PA8 |
||||
|
PIN_ADD(PA8) |
||||
|
#endif |
||||
|
#ifdef PA9 |
||||
|
PIN_ADD(PA9) |
||||
|
#endif |
||||
|
#ifdef PA10 |
||||
|
PIN_ADD(PA10) |
||||
|
#endif |
||||
|
#ifdef PA11 |
||||
|
PIN_ADD(PA11) |
||||
|
#endif |
||||
|
#ifdef PA12 |
||||
|
PIN_ADD(PA12) |
||||
|
#endif |
||||
|
#ifdef PA13 |
||||
|
PIN_ADD(PA13) |
||||
|
#endif |
||||
|
#ifdef PA14 |
||||
|
PIN_ADD(PA14) |
||||
|
#endif |
||||
|
#ifdef PA15 |
||||
|
PIN_ADD(PA15) |
||||
|
#endif |
||||
|
|
||||
|
#ifdef PB0 |
||||
|
PIN_ADD(PB0) |
||||
|
#endif |
||||
|
#ifdef PB1 |
||||
|
PIN_ADD(PB1) |
||||
|
#endif |
||||
|
#ifdef PB2 |
||||
|
PIN_ADD(PB2) |
||||
|
#endif |
||||
|
#ifdef PB3 |
||||
|
PIN_ADD(PB3) |
||||
|
#endif |
||||
|
#ifdef PB4 |
||||
|
PIN_ADD(PB4) |
||||
|
#endif |
||||
|
#ifdef PB5 |
||||
|
PIN_ADD(PB5) |
||||
|
#endif |
||||
|
#ifdef PB6 |
||||
|
PIN_ADD(PB6) |
||||
|
#endif |
||||
|
#ifdef PB7 |
||||
|
PIN_ADD(PB7) |
||||
|
#endif |
||||
|
#ifdef PB8 |
||||
|
PIN_ADD(PB8) |
||||
|
#endif |
||||
|
#ifdef PB9 |
||||
|
PIN_ADD(PB9) |
||||
|
#endif |
||||
|
#ifdef PB10 |
||||
|
PIN_ADD(PB10) |
||||
|
#endif |
||||
|
#ifdef PB11 |
||||
|
PIN_ADD(PB11) |
||||
|
#endif |
||||
|
#ifdef PB12 |
||||
|
PIN_ADD(PB12) |
||||
|
#endif |
||||
|
#ifdef PB13 |
||||
|
PIN_ADD(PB13) |
||||
|
#endif |
||||
|
#ifdef PB14 |
||||
|
PIN_ADD(PB14) |
||||
|
#endif |
||||
|
#ifdef PB15 |
||||
|
PIN_ADD(PB15) |
||||
|
#endif |
||||
|
|
||||
|
#ifdef PC0 |
||||
|
PIN_ADD(PC0) |
||||
|
#endif |
||||
|
#ifdef PC1 |
||||
|
PIN_ADD(PC1) |
||||
|
#endif |
||||
|
#ifdef PC2 |
||||
|
PIN_ADD(PC2) |
||||
|
#endif |
||||
|
#ifdef PC3 |
||||
|
PIN_ADD(PC3) |
||||
|
#endif |
||||
|
#ifdef PC4 |
||||
|
PIN_ADD(PC4) |
||||
|
#endif |
||||
|
#ifdef PC5 |
||||
|
PIN_ADD(PC5) |
||||
|
#endif |
||||
|
#ifdef PC6 |
||||
|
PIN_ADD(PC6) |
||||
|
#endif |
||||
|
#ifdef PC7 |
||||
|
PIN_ADD(PC7) |
||||
|
#endif |
||||
|
#ifdef PC8 |
||||
|
PIN_ADD(PC8) |
||||
|
#endif |
||||
|
#ifdef PC9 |
||||
|
PIN_ADD(PC9) |
||||
|
#endif |
||||
|
#ifdef PC10 |
||||
|
PIN_ADD(PC10) |
||||
|
#endif |
||||
|
#ifdef PC11 |
||||
|
PIN_ADD(PC11) |
||||
|
#endif |
||||
|
#ifdef PC12 |
||||
|
PIN_ADD(PC12) |
||||
|
#endif |
||||
|
#ifdef PC13 |
||||
|
PIN_ADD(PC13) |
||||
|
#endif |
||||
|
#ifdef PC14 |
||||
|
PIN_ADD(PC14) |
||||
|
#endif |
||||
|
#ifdef PC15 |
||||
|
PIN_ADD(PC15) |
||||
|
#endif |
||||
|
|
||||
|
#ifdef PD0 |
||||
|
PIN_ADD(PD0) |
||||
|
#endif |
||||
|
#ifdef PD1 |
||||
|
PIN_ADD(PD1) |
||||
|
#endif |
||||
|
#ifdef PD2 |
||||
|
PIN_ADD(PD2) |
||||
|
#endif |
||||
|
#ifdef PD3 |
||||
|
PIN_ADD(PD3) |
||||
|
#endif |
||||
|
#ifdef PD4 |
||||
|
PIN_ADD(PD4) |
||||
|
#endif |
||||
|
#ifdef PD5 |
||||
|
PIN_ADD(PD5) |
||||
|
#endif |
||||
|
#ifdef PD6 |
||||
|
PIN_ADD(PD6) |
||||
|
#endif |
||||
|
#ifdef PD7 |
||||
|
PIN_ADD(PD7) |
||||
|
#endif |
||||
|
#ifdef PD8 |
||||
|
PIN_ADD(PD8) |
||||
|
#endif |
||||
|
#ifdef PD9 |
||||
|
PIN_ADD(PD9) |
||||
|
#endif |
||||
|
#ifdef PD10 |
||||
|
PIN_ADD(PD10) |
||||
|
#endif |
||||
|
#ifdef PD11 |
||||
|
PIN_ADD(PD11) |
||||
|
#endif |
||||
|
#ifdef PD12 |
||||
|
PIN_ADD(PD12) |
||||
|
#endif |
||||
|
#ifdef PD13 |
||||
|
PIN_ADD(PD13) |
||||
|
#endif |
||||
|
#ifdef PD14 |
||||
|
PIN_ADD(PD14) |
||||
|
#endif |
||||
|
#ifdef PD15 |
||||
|
PIN_ADD(PD15) |
||||
|
#endif |
||||
|
|
||||
|
#ifdef PE0 |
||||
|
PIN_ADD(PE0) |
||||
|
#endif |
||||
|
#ifdef PE1 |
||||
|
PIN_ADD(PE1) |
||||
|
#endif |
||||
|
#ifdef PE2 |
||||
|
PIN_ADD(PE2) |
||||
|
#endif |
||||
|
#ifdef PE3 |
||||
|
PIN_ADD(PE3) |
||||
|
#endif |
||||
|
#ifdef PE4 |
||||
|
PIN_ADD(PE4) |
||||
|
#endif |
||||
|
#ifdef PE5 |
||||
|
PIN_ADD(PE5) |
||||
|
#endif |
||||
|
#ifdef PE6 |
||||
|
PIN_ADD(PE6) |
||||
|
#endif |
||||
|
#ifdef PE7 |
||||
|
PIN_ADD(PE7) |
||||
|
#endif |
||||
|
#ifdef PE8 |
||||
|
PIN_ADD(PE8) |
||||
|
#endif |
||||
|
#ifdef PE9 |
||||
|
PIN_ADD(PE9) |
||||
|
#endif |
||||
|
#ifdef PE10 |
||||
|
PIN_ADD(PE10) |
||||
|
#endif |
||||
|
#ifdef PE11 |
||||
|
PIN_ADD(PE11) |
||||
|
#endif |
||||
|
#ifdef PE12 |
||||
|
PIN_ADD(PE12) |
||||
|
#endif |
||||
|
#ifdef PE13 |
||||
|
PIN_ADD(PE13) |
||||
|
#endif |
||||
|
#ifdef PE14 |
||||
|
PIN_ADD(PE14) |
||||
|
#endif |
||||
|
#ifdef PE15 |
||||
|
PIN_ADD(PE15) |
||||
|
#endif |
||||
|
|
||||
|
#ifdef PF0 |
||||
|
PIN_ADD(PF0) |
||||
|
#endif |
||||
|
#ifdef PF1 |
||||
|
PIN_ADD(PF1) |
||||
|
#endif |
||||
|
#ifdef PF2 |
||||
|
PIN_ADD(PF2) |
||||
|
#endif |
||||
|
#ifdef PF3 |
||||
|
PIN_ADD(PF3) |
||||
|
#endif |
||||
|
#ifdef PF4 |
||||
|
PIN_ADD(PF4) |
||||
|
#endif |
||||
|
#ifdef PF5 |
||||
|
PIN_ADD(PF5) |
||||
|
#endif |
||||
|
#ifdef PF6 |
||||
|
PIN_ADD(PF6) |
||||
|
#endif |
||||
|
#ifdef PF7 |
||||
|
PIN_ADD(PF7) |
||||
|
#endif |
||||
|
#ifdef PF8 |
||||
|
PIN_ADD(PF8) |
||||
|
#endif |
||||
|
#ifdef PF9 |
||||
|
PIN_ADD(PF9) |
||||
|
#endif |
||||
|
#ifdef PF10 |
||||
|
PIN_ADD(PF10) |
||||
|
#endif |
||||
|
#ifdef PF11 |
||||
|
PIN_ADD(PF11) |
||||
|
#endif |
||||
|
#ifdef PF12 |
||||
|
PIN_ADD(PF12) |
||||
|
#endif |
||||
|
#ifdef PF13 |
||||
|
PIN_ADD(PF13) |
||||
|
#endif |
||||
|
#ifdef PF14 |
||||
|
PIN_ADD(PF14) |
||||
|
#endif |
||||
|
#ifdef PF15 |
||||
|
PIN_ADD(PF15) |
||||
|
#endif |
||||
|
|
||||
|
#ifdef PG0 |
||||
|
PIN_ADD(PG0) |
||||
|
#endif |
||||
|
#ifdef PG1 |
||||
|
PIN_ADD(PG1) |
||||
|
#endif |
||||
|
#ifdef PG2 |
||||
|
PIN_ADD(PG2) |
||||
|
#endif |
||||
|
#ifdef PG3 |
||||
|
PIN_ADD(PG3) |
||||
|
#endif |
||||
|
#ifdef PG4 |
||||
|
PIN_ADD(PG4) |
||||
|
#endif |
||||
|
#ifdef PG5 |
||||
|
PIN_ADD(PG5) |
||||
|
#endif |
||||
|
#ifdef PG6 |
||||
|
PIN_ADD(PG6) |
||||
|
#endif |
||||
|
#ifdef PG7 |
||||
|
PIN_ADD(PG7) |
||||
|
#endif |
||||
|
#ifdef PG8 |
||||
|
PIN_ADD(PG8) |
||||
|
#endif |
||||
|
#ifdef PG9 |
||||
|
PIN_ADD(PG9) |
||||
|
#endif |
||||
|
#ifdef PG10 |
||||
|
PIN_ADD(PG10) |
||||
|
#endif |
||||
|
#ifdef PG11 |
||||
|
PIN_ADD(PG11) |
||||
|
#endif |
||||
|
#ifdef PG12 |
||||
|
PIN_ADD(PG12) |
||||
|
#endif |
||||
|
#ifdef PG13 |
||||
|
PIN_ADD(PG13) |
||||
|
#endif |
||||
|
#ifdef PG14 |
||||
|
PIN_ADD(PG14) |
||||
|
#endif |
||||
|
#ifdef PG15 |
||||
|
PIN_ADD(PG15) |
||||
|
#endif |
||||
|
|
||||
|
#ifdef PH0 |
||||
|
PIN_ADD(PH0) |
||||
|
#endif |
||||
|
#ifdef PH1 |
||||
|
PIN_ADD(PH1) |
||||
|
#endif |
||||
|
#ifdef PH2 |
||||
|
PIN_ADD(PH2) |
||||
|
#endif |
||||
|
#ifdef PH3 |
||||
|
PIN_ADD(PH3) |
||||
|
#endif |
||||
|
#ifdef PH4 |
||||
|
PIN_ADD(PH4) |
||||
|
#endif |
||||
|
#ifdef PH5 |
||||
|
PIN_ADD(PH5) |
||||
|
#endif |
||||
|
#ifdef PH6 |
||||
|
PIN_ADD(PH6) |
||||
|
#endif |
||||
|
#ifdef PH7 |
||||
|
PIN_ADD(PH7) |
||||
|
#endif |
||||
|
#ifdef PH8 |
||||
|
PIN_ADD(PH8) |
||||
|
#endif |
||||
|
#ifdef PH9 |
||||
|
PIN_ADD(PH9) |
||||
|
#endif |
||||
|
#ifdef PH10 |
||||
|
PIN_ADD(PH10) |
||||
|
#endif |
||||
|
#ifdef PH11 |
||||
|
PIN_ADD(PH11) |
||||
|
#endif |
||||
|
#ifdef PH12 |
||||
|
PIN_ADD(PH12) |
||||
|
#endif |
||||
|
#ifdef PH13 |
||||
|
PIN_ADD(PH13) |
||||
|
#endif |
||||
|
#ifdef PH14 |
||||
|
PIN_ADD(PH14) |
||||
|
#endif |
||||
|
#ifdef PH15 |
||||
|
PIN_ADD(PH15) |
||||
|
#endif |
||||
|
|
||||
|
#ifdef PI0 |
||||
|
PIN_ADD(PI0) |
||||
|
#endif |
||||
|
#ifdef PI1 |
||||
|
PIN_ADD(PI1) |
||||
|
#endif |
||||
|
#ifdef PI2 |
||||
|
PIN_ADD(PI2) |
||||
|
#endif |
||||
|
#ifdef PI3 |
||||
|
PIN_ADD(PI3) |
||||
|
#endif |
||||
|
#ifdef PI4 |
||||
|
PIN_ADD(PI4) |
||||
|
#endif |
||||
|
#ifdef PI5 |
||||
|
PIN_ADD(PI5) |
||||
|
#endif |
||||
|
#ifdef PI6 |
||||
|
PIN_ADD(PI6) |
||||
|
#endif |
||||
|
#ifdef PI7 |
||||
|
PIN_ADD(PI7) |
||||
|
#endif |
||||
|
#ifdef PI8 |
||||
|
PIN_ADD(PI8) |
||||
|
#endif |
||||
|
#ifdef PI9 |
||||
|
PIN_ADD(PI9) |
||||
|
#endif |
||||
|
#ifdef PI10 |
||||
|
PIN_ADD(PI10) |
||||
|
#endif |
||||
|
#ifdef PI11 |
||||
|
PIN_ADD(PI11) |
||||
|
#endif |
||||
|
#ifdef PI12 |
||||
|
PIN_ADD(PI12) |
||||
|
#endif |
||||
|
#ifdef PI13 |
||||
|
PIN_ADD(PI13) |
||||
|
#endif |
||||
|
#ifdef PI14 |
||||
|
PIN_ADD(PI14) |
||||
|
#endif |
||||
|
#ifdef PI15 |
||||
|
PIN_ADD(PI15) |
||||
|
#endif |
||||
|
|
||||
|
#ifdef PJ0 |
||||
|
PIN_ADD(PJ0) |
||||
|
#endif |
||||
|
#ifdef PJ1 |
||||
|
PIN_ADD(PJ1) |
||||
|
#endif |
||||
|
#ifdef PJ2 |
||||
|
PIN_ADD(PJ2) |
||||
|
#endif |
||||
|
#ifdef PJ3 |
||||
|
PIN_ADD(PJ3) |
||||
|
#endif |
||||
|
#ifdef PJ4 |
||||
|
PIN_ADD(PJ4) |
||||
|
#endif |
||||
|
#ifdef PJ5 |
||||
|
PIN_ADD(PJ5) |
||||
|
#endif |
||||
|
#ifdef PJ6 |
||||
|
PIN_ADD(PJ6) |
||||
|
#endif |
||||
|
#ifdef PJ7 |
||||
|
PIN_ADD(PJ7) |
||||
|
#endif |
||||
|
#ifdef PJ8 |
||||
|
PIN_ADD(PJ8) |
||||
|
#endif |
||||
|
#ifdef PJ9 |
||||
|
PIN_ADD(PJ9) |
||||
|
#endif |
||||
|
#ifdef PJ10 |
||||
|
PIN_ADD(PJ10) |
||||
|
#endif |
||||
|
#ifdef PJ11 |
||||
|
PIN_ADD(PJ11) |
||||
|
#endif |
||||
|
#ifdef PJ12 |
||||
|
PIN_ADD(PJ12) |
||||
|
#endif |
||||
|
#ifdef PJ13 |
||||
|
PIN_ADD(PJ13) |
||||
|
#endif |
||||
|
#ifdef PJ14 |
||||
|
PIN_ADD(PJ14) |
||||
|
#endif |
||||
|
#ifdef PJ15 |
||||
|
PIN_ADD(PJ15) |
||||
|
#endif |
||||
|
|
||||
|
#ifdef PK0 |
||||
|
PIN_ADD(PK0) |
||||
|
#endif |
||||
|
#ifdef PK1 |
||||
|
PIN_ADD(PK1) |
||||
|
#endif |
||||
|
#ifdef PK2 |
||||
|
PIN_ADD(PK2) |
||||
|
#endif |
||||
|
#ifdef PK3 |
||||
|
PIN_ADD(PK3) |
||||
|
#endif |
||||
|
#ifdef PK4 |
||||
|
PIN_ADD(PK4) |
||||
|
#endif |
||||
|
#ifdef PK5 |
||||
|
PIN_ADD(PK5) |
||||
|
#endif |
||||
|
#ifdef PK6 |
||||
|
PIN_ADD(PK6) |
||||
|
#endif |
||||
|
#ifdef PK7 |
||||
|
PIN_ADD(PK7) |
||||
|
#endif |
||||
|
#ifdef PK8 |
||||
|
PIN_ADD(PK8) |
||||
|
#endif |
||||
|
#ifdef PK9 |
||||
|
PIN_ADD(PK9) |
||||
|
#endif |
||||
|
#ifdef PK10 |
||||
|
PIN_ADD(PK10) |
||||
|
#endif |
||||
|
#ifdef PK11 |
||||
|
PIN_ADD(PK11) |
||||
|
#endif |
||||
|
#ifdef PK12 |
||||
|
PIN_ADD(PK12) |
||||
|
#endif |
||||
|
#ifdef PK13 |
||||
|
PIN_ADD(PK13) |
||||
|
#endif |
||||
|
#ifdef PK14 |
||||
|
PIN_ADD(PK14) |
||||
|
#endif |
||||
|
#ifdef PK15 |
||||
|
PIN_ADD(PK15) |
||||
|
#endif |
||||
|
|
||||
|
#ifdef PL0 |
||||
|
PIN_ADD(PL0) |
||||
|
#endif |
||||
|
#ifdef PL1 |
||||
|
PIN_ADD(PL1) |
||||
|
#endif |
||||
|
#ifdef PL2 |
||||
|
PIN_ADD(PL2) |
||||
|
#endif |
||||
|
#ifdef PL3 |
||||
|
PIN_ADD(PL3) |
||||
|
#endif |
||||
|
#ifdef PL4 |
||||
|
PIN_ADD(PL4) |
||||
|
#endif |
||||
|
#ifdef PL5 |
||||
|
PIN_ADD(PL5) |
||||
|
#endif |
||||
|
#ifdef PL6 |
||||
|
PIN_ADD(PL6) |
||||
|
#endif |
||||
|
#ifdef PL7 |
||||
|
PIN_ADD(PL7) |
||||
|
#endif |
||||
|
#ifdef PL8 |
||||
|
PIN_ADD(PL8) |
||||
|
#endif |
||||
|
#ifdef PL9 |
||||
|
PIN_ADD(PL9) |
||||
|
#endif |
||||
|
#ifdef PL10 |
||||
|
PIN_ADD(PL10) |
||||
|
#endif |
||||
|
#ifdef PL11 |
||||
|
PIN_ADD(PL11) |
||||
|
#endif |
||||
|
#ifdef PL12 |
||||
|
PIN_ADD(PL12) |
||||
|
#endif |
||||
|
#ifdef PL13 |
||||
|
PIN_ADD(PL13) |
||||
|
#endif |
||||
|
#ifdef PL14 |
||||
|
PIN_ADD(PL14) |
||||
|
#endif |
||||
|
#ifdef PL15 |
||||
|
PIN_ADD(PL15) |
||||
|
#endif |
||||
@ -1 +1,27 @@ |
|||||
#error Debug pins is not supported on this Platform! |
/**
|
||||
|
* Marlin 3D Printer Firmware |
||||
|
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
|
* |
||||
|
* This program is free software: you can redistribute it and/or modify |
||||
|
* it under the terms of the GNU General Public License as published by |
||||
|
* the Free Software Foundation, either version 3 of the License, or |
||||
|
* (at your option) any later version. |
||||
|
* |
||||
|
* This program is distributed in the hope that it will be useful, |
||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
|
* GNU General Public License for more details. |
||||
|
* |
||||
|
* You should have received a copy of the GNU General Public License |
||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
|
* |
||||
|
*/ |
||||
|
#pragma once |
||||
|
|
||||
|
#ifdef NUM_DIGITAL_PINS // Only in ST's Arduino core (STM32duino, STM32Core)
|
||||
|
#include "../HAL_STM32/pinsDebug_STM32duino.h" |
||||
|
#elif defined(BOARD_NR_GPIO_PINS) // Only in STM32GENERIC (Maple)
|
||||
|
#include "../HAL_STM32/pinsDebug_STM32GENERIC.h" |
||||
|
#else |
||||
|
#error "M43 not supported for this board" |
||||
|
#endif |
||||
|
|||||
@ -1 +1,27 @@ |
|||||
#error Debug pins is not supported on this Platform! |
/**
|
||||
|
* Marlin 3D Printer Firmware |
||||
|
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
|
* |
||||
|
* This program is free software: you can redistribute it and/or modify |
||||
|
* it under the terms of the GNU General Public License as published by |
||||
|
* the Free Software Foundation, either version 3 of the License, or |
||||
|
* (at your option) any later version. |
||||
|
* |
||||
|
* This program is distributed in the hope that it will be useful, |
||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
|
* GNU General Public License for more details. |
||||
|
* |
||||
|
* You should have received a copy of the GNU General Public License |
||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
|
* |
||||
|
*/ |
||||
|
#pragma once |
||||
|
|
||||
|
#ifdef NUM_DIGITAL_PINS // Only in ST's Arduino core (STM32duino, STM32Core)
|
||||
|
#include "../HAL_STM32/pinsDebug_STM32duino.h" |
||||
|
#elif defined(BOARD_NR_GPIO_PINS) // Only in STM32GENERIC (Maple)
|
||||
|
#include "../HAL_STM32/pinsDebug_STM32GENERIC.h" |
||||
|
#else |
||||
|
#error "M43 not supported for this board" |
||||
|
#endif |
||||
|
|||||
Loading…
Reference in new issue