Browse Source

Add 5DPrint D8 Driver Board info and temperature table for Makibox hot bed

pull/1/head
Cameron Lai 11 years ago
parent
commit
da6b536182
  1. 2
      Marlin/Configuration.h
  2. 35
      Marlin/thermistortables.h

2
Marlin/Configuration.h

@ -70,6 +70,7 @@
// 91 = Final OMCA board // 91 = Final OMCA board
// 301= Rambo // 301= Rambo
// 21 = Elefu Ra Board (v3) // 21 = Elefu Ra Board (v3)
// 88 = 5DPrint D8 Driver Board
#ifndef MOTHERBOARD #ifndef MOTHERBOARD
#define MOTHERBOARD 7 #define MOTHERBOARD 7
@ -116,6 +117,7 @@
// 9 is 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) // 9 is 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
// 10 is 100k RS thermistor 198-961 (4.7k pullup) // 10 is 100k RS thermistor 198-961 (4.7k pullup)
// 11 is 100k beta 3950 1% thermistor (4.7k pullup) // 11 is 100k beta 3950 1% thermistor (4.7k pullup)
// 12 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
// 20 is the PT100 circuit found in the Ultimainboard V2.x // 20 is the PT100 circuit found in the Ultimainboard V2.x
// 60 is 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 // 60 is 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
// //

35
Marlin/thermistortables.h

@ -921,6 +921,41 @@ const short temptable_60[][2] PROGMEM = {
{1008*OVERSAMPLENR, 0}, {1008*OVERSAMPLENR, 0},
}; };
#endif #endif
#if (THERMISTORBED == 12)
//100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
const short temptable_12[][2] PROGMEM = {
{35*OVERSAMPLENR, 180}, //top rating 180C
{211*OVERSAMPLENR, 140},
{233*OVERSAMPLENR, 135},
{261*OVERSAMPLENR, 130},
{290*OVERSAMPLENR, 125},
{328*OVERSAMPLENR, 120},
{362*OVERSAMPLENR, 115},
{406*OVERSAMPLENR, 110},
{446*OVERSAMPLENR, 105},
{496*OVERSAMPLENR, 100},
{539*OVERSAMPLENR, 95},
{585*OVERSAMPLENR, 90},
{629*OVERSAMPLENR, 85},
{675*OVERSAMPLENR, 80},
{718*OVERSAMPLENR, 75},
{758*OVERSAMPLENR, 70},
{793*OVERSAMPLENR, 65},
{822*OVERSAMPLENR, 60},
{841*OVERSAMPLENR, 55},
{875*OVERSAMPLENR, 50},
{899*OVERSAMPLENR, 45},
{926*OVERSAMPLENR, 40},
{946*OVERSAMPLENR, 35},
{962*OVERSAMPLENR, 30},
{977*OVERSAMPLENR, 25},
{987*OVERSAMPLENR, 20},
{995*OVERSAMPLENR, 15},
{1001*OVERSAMPLENR, 10},
{1010*OVERSAMPLENR, 0},
{1023*OVERSAMPLENR, -40},
};
#endif
// Pt1000 and Pt100 handling // Pt1000 and Pt100 handling
// //

Loading…
Cancel
Save