Browse Source

Add Selena Compact board (#9407)

5-axis, high performance, powerful board with Smoothieware opensource firmware. Designed for 3D printer, Laser cutter or CNC mill. Five changed independent drivers on board. Two extruders 3d printer support.
pull/1/head
Alexey Shvetsov 7 years ago
committed by Scott Lahteine
parent
commit
da3a0d619c
  1. 1
      Marlin/src/core/boards.h
  2. 2
      Marlin/src/pins/pins.h
  3. 115
      Marlin/src/pins/pins_SELENA_COMPACT.h
  4. 1
      README.md

1
Marlin/src/core/boards.h

@ -162,6 +162,7 @@
#define BOARD_AZSMZ_MINI 1751 // AZSMZ Mini #define BOARD_AZSMZ_MINI 1751 // AZSMZ Mini
#define BOARD_AZTEEG_X5_GT 1752 // Azteeg X5 GT (Power outputs: Hotend0, Hotend1, Bed, Fan) #define BOARD_AZTEEG_X5_GT 1752 // Azteeg X5 GT (Power outputs: Hotend0, Hotend1, Bed, Fan)
#define BOARD_BIQU_BQ111_A4 1753 // BIQU BQ111-A4 (Power outputs: Hotend, Fan, Bed) #define BOARD_BIQU_BQ111_A4 1753 // BIQU BQ111-A4 (Power outputs: Hotend, Fan, Bed)
#define BOARD_SELENA_COMPACT 1754 // Selena Compact (Power outputs: Hotend0, Hotend1, Bed0, Bed1, Fan0, Fan1)
// //
// SAM3X8E ARM Cortex M3 // SAM3X8E ARM Cortex M3

2
Marlin/src/pins/pins.h

@ -341,6 +341,8 @@
#include "pins_BIQU_BQ111_A4.h" #include "pins_BIQU_BQ111_A4.h"
#elif MB(THE_BORG) #elif MB(THE_BORG)
#include "pins_THE_BORG.h" #include "pins_THE_BORG.h"
#elif MB(SELENA_COMPACT)
#include "pins_SELENA_COMPACT.h"
#else #else
#error "Unknown MOTHERBOARD value set in Configuration.h" #error "Unknown MOTHERBOARD value set in Configuration.h"
#endif #endif

115
Marlin/src/pins/pins_SELENA_COMPACT.h

@ -0,0 +1,115 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* Copyright (C) 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Selena Compact pin assignments
*/
#ifndef TARGET_LPC1768
#error "Oops! Make sure you have LPC1768 selected."
#endif
#ifndef BOARD_NAME
#define BOARD_NAME "Selena Compact"
#define DEFAULT_WEBSITE_URL "https://github.com/Ales2-k/Selena"
#endif
//
// Limit Switches
//
#define X_MIN_PIN P1_28
#define X_MAX_PIN P1_25
#define Y_MIN_PIN P2_11
#define Y_MAX_PIN -1
#define Z_MIN_PIN P1_27
#define Z_MAX_PIN -1
#define Z_PROBE P1_22
//
// Steppers
//
#define X_STEP_PIN P2_00
#define X_DIR_PIN P0_05
#define X_ENABLE_PIN P0_04
#define Y_STEP_PIN P2_01
#define Y_DIR_PIN P0_11
#define Y_ENABLE_PIN P0_10
#define Z_STEP_PIN P2_02
#define Z_DIR_PIN P0_20
#define Z_ENABLE_PIN P0_19
#define E0_STEP_PIN P2_03
#define E0_DIR_PIN P0_22
#define E0_ENABLE_PIN P0_21
#define E1_STEP_PIN P2_08
#define E1_DIR_PIN P2_13
#define E1_ENABLE_PIN P4_29
//
// Temperature Sensors
// 3.3V max when defined as an analog input
//
#define TEMP_BED_PIN 0 // A0 (TH1)
#define TEMP_0_PIN 1 // A1 (TH2)
#define TEMP_1_PIN 2 // A2 (TH3)
//
// Heaters / Fans
//
#define HEATER_BED_PIN P2_05
#define HEATER_BED2_PIN P2_04
#define HEATER_0_PIN P2_07
#define HEATER_1_PIN P2_06
#define FAN_PIN P1_24
#define FAN1_PIN P1_26
//
// Display
//
#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#define LCD_PINS_RS P0_16
#define LCD_PINS_ENABLE P0_18
#define LCD_PINS_D4 P0_15
#define LCD_PINS_D5 P1_00
#define LCD_PINS_D6 P1_01
#define LCD_PINS_D7 P1_04
#define BEEPER_PIN P1_31
#define BTN_EN1 P3_25
#define BTN_EN2 P3_26
#define BTN_ENC P1_30
#define SD_DETECT_PIN -1
#endif // REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
//
// Servo
//
#define SERVO0_PIN P1_23

1
README.md

@ -32,6 +32,7 @@ Marlin 2.0 adds a new abstraction layer so that Marlin can build and run on 32-b
[Re-ARM](https://www.kickstarter.com/projects/1245051645/re-arm-for-ramps-simple-32-bit-upgrade)|[LPC1768 ARM-Cortex M3](http://www.nxp.com/products/microcontrollers-and-processors/arm-based-processors-and-mcus/lpc-cortex-m-mcus/lpc1700-cortex-m3/512kb-flash-64kb-sram-ethernet-usb-lqfp100-package:LPC1768FBD100)|100MHz|512k|32+16+16k|3.3-5V|no [Re-ARM](https://www.kickstarter.com/projects/1245051645/re-arm-for-ramps-simple-32-bit-upgrade)|[LPC1768 ARM-Cortex M3](http://www.nxp.com/products/microcontrollers-and-processors/arm-based-processors-and-mcus/lpc-cortex-m-mcus/lpc1700-cortex-m3/512kb-flash-64kb-sram-ethernet-usb-lqfp100-package:LPC1768FBD100)|100MHz|512k|32+16+16k|3.3-5V|no
[MKS SBASE](http://forums.reprap.org/read.php?13,499322)|LPC1768 ARM-Cortex M3|100MHz|512k|32+16+16k|3.3-5V|no [MKS SBASE](http://forums.reprap.org/read.php?13,499322)|LPC1768 ARM-Cortex M3|100MHz|512k|32+16+16k|3.3-5V|no
[Azteeg X5 GT](https://www.panucatt.com/azteeg_X5_GT_reprap_3d_printer_controller_p/ax5gt.htm)|LPC1769 ARM-Cortex M3|120MHz|512k|32+16+16k|3.3-5V|no [Azteeg X5 GT](https://www.panucatt.com/azteeg_X5_GT_reprap_3d_printer_controller_p/ax5gt.htm)|LPC1769 ARM-Cortex M3|120MHz|512k|32+16+16k|3.3-5V|no
[Selena Compact](https://github.com/Ales2-k/Selena)|LPC1768 ARM-Cortex M3|100MHz|512k|32+16+16k|3.3-5V|no
[Teensy 3.5](https://www.pjrc.com/store/teensy35.html)|ARM-Cortex M4|120MHz|512k|192k|3.3-5V|yes [Teensy 3.5](https://www.pjrc.com/store/teensy35.html)|ARM-Cortex M4|120MHz|512k|192k|3.3-5V|yes
[Teensy 3.6](https://www.pjrc.com/store/teensy36.html)|ARM-Cortex M4|180MHz|1M|256k|3.3V|yes [Teensy 3.6](https://www.pjrc.com/store/teensy36.html)|ARM-Cortex M4|180MHz|1M|256k|3.3V|yes

Loading…
Cancel
Save