thisiskeithb
5 years ago
committed by
Scott Lahteine
Scott Lahteine
6 changed files with 218 additions and 7 deletions
@ -0,0 +1,143 @@ |
|||
/**
|
|||
* Marlin 3D Printer Firmware |
|||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|||
* |
|||
* Based on Sprinter and grbl. |
|||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm |
|||
* |
|||
* This program is free software: you can redistribute it and/or modify |
|||
* it under the terms of the GNU General Public License as published by |
|||
* the Free Software Foundation, either version 3 of the License, or |
|||
* (at your option) any later version. |
|||
* |
|||
* This program is distributed in the hope that it will be useful, |
|||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
|||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
|||
* GNU General Public License for more details. |
|||
* |
|||
* You should have received a copy of the GNU General Public License |
|||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
* |
|||
*/ |
|||
#pragma once |
|||
|
|||
#ifndef __STM32F1__ |
|||
#error "Oops! Select an STM32F1 board in 'Tools > Board.'" |
|||
#endif |
|||
|
|||
#if HOTENDS > 1 || E_STEPPERS > 1 |
|||
#error "MKS Robin Lite supports up to 1 hotends / E-steppers. Comment out this line to continue." |
|||
#endif |
|||
|
|||
#ifndef BOARD_NAME |
|||
#define BOARD_NAME "MKS Robin Lite" |
|||
#endif |
|||
#define BOARD_WEBSITE_URL "https://github.com/makerbase-mks"
|
|||
|
|||
//#define DISABLE_DEBUG
|
|||
#define DISABLE_JTAG |
|||
#define ENABLE_SPI2 |
|||
|
|||
//
|
|||
// Limit Switches
|
|||
//
|
|||
#define X_STOP_PIN PC13 |
|||
#define Y_STOP_PIN PC0 |
|||
#define Z_MIN_PIN PC12 |
|||
#define Z_MAX_PIN PB9 |
|||
|
|||
//
|
|||
// Steppers
|
|||
//
|
|||
#define X_STEP_PIN PC6 |
|||
#define X_DIR_PIN PB12 |
|||
#define X_ENABLE_PIN PB10 |
|||
|
|||
#define Y_STEP_PIN PB11 |
|||
#define Y_DIR_PIN PB2 |
|||
#define Y_ENABLE_PIN PB10 |
|||
|
|||
#define Z_STEP_PIN PB1 |
|||
#define Z_DIR_PIN PC5 |
|||
#define Z_ENABLE_PIN PB10 |
|||
|
|||
#define E0_STEP_PIN PC4 |
|||
#define E0_DIR_PIN PA5 |
|||
#define E0_ENABLE_PIN PA4 |
|||
|
|||
//
|
|||
// Heaters / Fans
|
|||
//
|
|||
#define HEATER_0_PIN PC9 |
|||
#define FAN_PIN PA8 |
|||
#define HEATER_BED_PIN PC8 |
|||
|
|||
//
|
|||
// Temperature Sensors
|
|||
//
|
|||
#define TEMP_BED_PIN PA1 |
|||
#define TEMP_0_PIN PA0 |
|||
|
|||
#define FIL_RUNOUT_PIN PB8 // MT_DET
|
|||
|
|||
//
|
|||
// LCD Pins
|
|||
//
|
|||
#if HAS_SPI_LCD |
|||
#define BEEPER_PIN PD2 |
|||
#define BTN_ENC PB3 |
|||
#define LCD_PINS_RS PC3 |
|||
|
|||
#define BTN_EN1 PB5 |
|||
#define BTN_EN2 PB4 |
|||
|
|||
#define LCD_PINS_ENABLE PC2 |
|||
|
|||
#if ENABLED(MKS_MINI_12864) |
|||
|
|||
#define LCD_BACKLIGHT_PIN -1 |
|||
#define LCD_RESET_PIN -1 |
|||
#define DOGLCD_A0 PC1 |
|||
#define DOGLCD_CS PC2 |
|||
#define DOGLCD_SCK PB13 |
|||
#define DOGLCD_MOSI PB15 |
|||
|
|||
#else // !MKS_MINI_12864
|
|||
|
|||
#define LCD_PINS_D4 PC1 |
|||
#if ENABLED(ULTIPANEL) |
|||
#define LCD_PINS_D5 -1 |
|||
#define LCD_PINS_D6 -1 |
|||
#define LCD_PINS_D7 -1 |
|||
#endif |
|||
|
|||
#endif // !MKS_MINI_12864
|
|||
|
|||
#endif // HAS_SPI_LCD
|
|||
|
|||
// Motor current PWM pins
|
|||
#define MOTOR_CURRENT_PWM_XY_PIN PB0 |
|||
#define MOTOR_CURRENT_PWM_Z_PIN PA7 |
|||
#define MOTOR_CURRENT_PWM_E_PIN PA6 |
|||
#define MOTOR_CURRENT_PWM_RANGE (65535/10/3.3) // (255 * (1000mA / 65535)) * 257 = 1000 is equal 1.6v Vref in turn equal 1Amp
|
|||
#define DEFAULT_PWM_MOTOR_CURRENT { 1000, 1000, 1000 } // 1.05Amp per driver, here is XY, Z and E. This values determined empirically.
|
|||
|
|||
//
|
|||
// SD Card
|
|||
//
|
|||
#define ENABLE_SPI2 |
|||
#define SD_DETECT_PIN PC10 |
|||
#define SCK_PIN PB13 |
|||
#define MISO_PIN P1B4 |
|||
#define MOSI_PIN P1B5 |
|||
#define SS_PIN PA15 |
|||
|
|||
#ifndef ST7920_DELAY_1 |
|||
#define ST7920_DELAY_1 DELAY_NS(125) |
|||
#endif |
|||
#ifndef ST7920_DELAY_2 |
|||
#define ST7920_DELAY_2 DELAY_NS(125) |
|||
#endif |
|||
#ifndef ST7920_DELAY_3 |
|||
#define ST7920_DELAY_3 DELAY_NS(125) |
|||
#endif |
|||
@ -0,0 +1,14 @@ |
|||
MEMORY |
|||
{ |
|||
ram (rwx) : ORIGIN = 0x20000000, LENGTH = 48K - 40 |
|||
rom (rx) : ORIGIN = 0x08005000, LENGTH = 256K - 20K |
|||
} |
|||
|
|||
/* Provide memory region aliases for common.inc */ |
|||
REGION_ALIAS("REGION_TEXT", rom); |
|||
REGION_ALIAS("REGION_DATA", ram); |
|||
REGION_ALIAS("REGION_BSS", ram); |
|||
REGION_ALIAS("REGION_RODATA", rom); |
|||
|
|||
/* Let common.inc handle the real work. */ |
|||
INCLUDE common.inc |
|||
@ -0,0 +1,30 @@ |
|||
Import("env") |
|||
|
|||
# Relocate firmware from 0x08000000 to 0x08005000 |
|||
for define in env['CPPDEFINES']: |
|||
if define[0] == "VECT_TAB_ADDR": |
|||
env['CPPDEFINES'].remove(define) |
|||
env['CPPDEFINES'].append(("VECT_TAB_ADDR", "0x08005000")) |
|||
env.Replace(LDSCRIPT_PATH="buildroot/share/PlatformIO/ldscripts/mks_robin_lite.ld") |
|||
|
|||
# Encrypt ${PROGNAME}.bin and save it as 'mksLite.bin' |
|||
def encrypt(source, target, env): |
|||
import os |
|||
|
|||
key = [0xA3, 0xBD, 0xAD, 0x0D, 0x41, 0x11, 0xBB, 0x8D, 0xDC, 0x80, 0x2D, 0xD0, 0xD2, 0xC4, 0x9B, 0x1E, 0x26, 0xEB, 0xE3, 0x33, 0x4A, 0x15, 0xE4, 0x0A, 0xB3, 0xB1, 0x3C, 0x93, 0xBB, 0xAF, 0xF7, 0x3E] |
|||
|
|||
firmware = open(target[0].path, "rb") |
|||
robin = open(target[0].dir.path +'/mksLite.bin', "wb") |
|||
length = os.path.getsize(target[0].path) |
|||
position = 0 |
|||
try: |
|||
while position < length: |
|||
byte = firmware.read(1) |
|||
if position >= 320 and position < 31040: |
|||
byte = chr(ord(byte) ^ key[position & 31]) |
|||
robin.write(byte) |
|||
position += 1 |
|||
finally: |
|||
firmware.close() |
|||
robin.close() |
|||
env.AddPostAction("$BUILD_DIR/${PROGNAME}.bin", encrypt); |
|||
Loading…
Reference in new issue