andrey
/
Marlin_FB4S
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

Fix G76 probe height / position (#17392)

vanilla_fb_2.0.x
Tor-p 5 years ago
committed by GitHub
parent
1d81bb7a2b
commit
d6f39a69af
No known key found for this signature in database GPG Key ID: 4AEE18F83AFDEB23
6 changed files with 67 additions and 66 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 11
      Marlin/Configuration_adv.h
  2. 10
      Marlin/src/feature/probe_temp_comp.cpp
  3. 24
      Marlin/src/feature/probe_temp_comp.h
  4. 61
      Marlin/src/gcode/calibrate/G76_M871.cpp
  5. 15
      Marlin/src/inc/SanityCheck.h
  6. 2
      buildroot/share/tests/rambo-tests

11
Marlin/Configuration_adv.h
View File

@ -1600,18 +1600,11 @@
// Add additional compensation depending on hotend temperature
// Note: this values cannot be calibrated and have to be set manually
#if ENABLED(PROBE_TEMP_COMPENSATION)
// Max temperature that can be reached by heated bed.
// This is required only for the calibration process.
#define PTC_MAX_BED_TEMP BED_MAXTEMP
// Park position to wait for probe cooldown
#define PTC_PARK_POS_X 0.0F
#define PTC_PARK_POS_Y 0.0F
#define PTC_PARK_POS_Z 100.0F
#define PTC_PARK_POS { 0, 0, 100 }
// Probe position to probe and wait for probe to reach target temperature
#define PTC_PROBE_POS_X 90.0F
#define PTC_PROBE_POS_Y 100.0F
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually

10
Marlin/src/feature/probe_temp_comp.cpp
View File

@ -29,11 +29,11 @@
ProbeTempComp temp_comp;
int16_t ProbeTempComp::z_offsets_probe[ProbeTempComp::cali_info_init[TSI_PROBE].measurements], // = {0}
ProbeTempComp::z_offsets_bed[ProbeTempComp::cali_info_init[TSI_BED].measurements]; // = {0}
int16_t ProbeTempComp::z_offsets_probe[cali_info_init[TSI_PROBE].measurements], // = {0}
ProbeTempComp::z_offsets_bed[cali_info_init[TSI_BED].measurements]; // = {0}
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
int16_t ProbeTempComp::z_offsets_ext[ProbeTempComp::cali_info_init[TSI_EXT].measurements]; // = {0}
int16_t ProbeTempComp::z_offsets_ext[cali_info_init[TSI_EXT].measurements]; // = {0}
#endif
int16_t *ProbeTempComp::sensor_z_offsets[TSI_COUNT] = {
@ -44,9 +44,9 @@ int16_t *ProbeTempComp::sensor_z_offsets[TSI_COUNT] = {
};
const temp_calib_t ProbeTempComp::cali_info[TSI_COUNT] = {
ProbeTempComp::cali_info_init[TSI_PROBE], ProbeTempComp::cali_info_init[TSI_BED]
cali_info_init[TSI_PROBE], cali_info_init[TSI_BED]
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
, ProbeTempComp::cali_info_init[TSI_EXT]
, cali_info_init[TSI_EXT]
#endif
};

24
Marlin/src/feature/probe_temp_comp.h
View File

@ -44,30 +44,28 @@ typedef struct {
* Z-probes like the P.I.N.D.A V2 allow for compensation of
* measurement errors/shifts due to changed temperature.
*/
class ProbeTempComp {
public:
static constexpr temp_calib_t cali_info_init[TSI_COUNT] = {
static constexpr temp_calib_t cali_info_init[TSI_COUNT] = {
{ 10, 5, 30, 30 + 10 * 5 }, // Probe
{ 10, 5, 60, 60 + 10 * 5 }, // Bed
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
{ 20, 5, 180, 180 + 5 * 20 } // Extruder
#endif
};
};
class ProbeTempComp {
public:
static const temp_calib_t cali_info[TSI_COUNT];
// Where to park nozzle to wait for probe cooldown
static constexpr float park_point_x = PTC_PARK_POS_X,
park_point_y = PTC_PARK_POS_Y,
park_point_z = PTC_PARK_POS_Z,
static constexpr xyz_pos_t park_point = PTC_PARK_POS;
// XY coordinates of nozzle for probing the bed
measure_point_x = PTC_PROBE_POS_X, // Coordinates to probe
measure_point_y = PTC_PROBE_POS_Y;
//measure_point_x = 12.0f, // Coordinates to probe on MK52 magnetic heatbed
//measure_point_y = 7.3f;
static constexpr xy_pos_t measure_point = PTC_PROBE_POS; // Coordinates to probe
//measure_point = { 12.0f, 7.3f }; // Coordinates for the MK52 magnetic heatbed
static constexpr int max_bed_temp = PTC_MAX_BED_TEMP, // Max temperature to avoid heating errors
probe_calib_bed_temp = max_bed_temp, // Bed temperature while calibrating probe
static constexpr int probe_calib_bed_temp = BED_MAXTEMP - 10, // Bed temperature while calibrating probe
bed_calib_probe_temp = 30; // Probe temperature while calibrating bed
static int16_t *sensor_z_offsets[TSI_COUNT],

61
Marlin/src/gcode/calibrate/G76_M871.cpp
View File

@ -103,13 +103,19 @@ void GcodeSuite::G76() {
return false;
};
auto g76_probe = [](const xy_pos_t &xypos) {
auto g76_probe = [](const TempSensorID sid, uint16_t &targ, const xy_pos_t &nozpos) {
do_blocking_move_to_z(5.0); // Raise nozzle before probing
const float measured_z = probe.probe_at_point(xypos, PROBE_PT_NONE, 0, false); // verbose=0, probe_relative=false
const float measured_z = probe.probe_at_point(nozpos, PROBE_PT_NONE, 0, false); // verbose=0, probe_relative=false
if (isnan(measured_z))
SERIAL_ECHOLNPGM("!Received NAN. Aborting.");
else
else {
SERIAL_ECHOLNPAIR_F("Measured: ", measured_z);
if (targ == cali_info_init[sid].start_temp)
temp_comp.prepare_new_calibration(measured_z);
else
temp_comp.push_back_new_measurement(sid, measured_z);
targ += cali_info_init[sid].temp_res;
}
return measured_z;
};
@ -125,8 +131,9 @@ void GcodeSuite::G76() {
// Synchronize with planner
planner.synchronize();
const xyz_pos_t parkpos = { temp_comp.park_point_x, temp_comp.park_point_y, temp_comp.park_point_z };
const xy_pos_t ppos = { temp_comp.measure_point_x, temp_comp.measure_point_y };
const xyz_pos_t parkpos = temp_comp.park_point,
probe_pos_xyz = temp_comp.measure_point + xyz_pos_t({ 0.0f, 0.0f, 0.5f }),
noz_pos_xyz = probe_pos_xyz - probe.offset_xy; // Nozzle position based on probe position
if (do_bed_cal || do_probe_cal) {
// Ensure park position is reachable
@ -135,7 +142,7 @@ void GcodeSuite::G76() {
SERIAL_ECHOLNPGM("!Park");
else {
// Ensure probe position is reachable
reachable = probe.can_reach(ppos);
reachable = probe.can_reach(probe_pos_xyz);
if (!reachable) SERIAL_ECHOLNPGM("!Probe");
}
@ -149,8 +156,6 @@ void GcodeSuite::G76() {
remember_feedrate_scaling_off();
// Nozzle position based on probe position
const xy_pos_t noz_pos = ppos - probe.offset_xy;
/******************************************
* Calibrate bed temperature offsets
@ -159,9 +164,13 @@ void GcodeSuite::G76() {
// Report temperatures every second and handle heating timeouts
millis_t next_temp_report = millis() + 1000;
auto report_targets = [&](const uint16_t tb, const uint16_t tp) {
SERIAL_ECHOLNPAIR("Target Bed:", tb, " Probe:", tp);
};
if (do_bed_cal) {
uint16_t target_bed = temp_comp.cali_info_init[TSI_BED].start_temp,
uint16_t target_bed = cali_info_init[TSI_BED].start_temp,
target_probe = temp_comp.bed_calib_probe_temp;
SERIAL_ECHOLNPGM("Waiting for cooling.");
@ -176,7 +185,7 @@ void GcodeSuite::G76() {
for (;;) {
thermalManager.setTargetBed(target_bed);
SERIAL_ECHOLNPAIR("Target Bed:", target_bed, " Probe:", target_probe);
report_targets(target_bed, target_probe);
// Park nozzle
do_blocking_move_to(parkpos);
@ -188,21 +197,13 @@ void GcodeSuite::G76() {
}
// Move the nozzle to the probing point and wait for the probe to reach target temp
do_blocking_move_to_xy(noz_pos);
do_blocking_move_to(noz_pos_xyz);
SERIAL_ECHOLNPGM("Waiting for probe heating.");
while (thermalManager.degProbe() < target_probe)
report_temps(next_temp_report);
const float measured_z = g76_probe(noz_pos);
if (isnan(measured_z)) break;
if (target_bed == temp_comp.cali_info_init[TSI_BED].start_temp)
temp_comp.prepare_new_calibration(measured_z);
else
temp_comp.push_back_new_measurement(TSI_BED, measured_z);
target_bed += temp_comp.cali_info_init[TSI_BED].temp_res;
if (target_bed > temp_comp.max_bed_temp) break;
const float measured_z = g76_probe(TSI_BED, target_bed, noz_pos_xyz);
if (isnan(measured_z) || target_bed > BED_MAXTEMP - 10) break;
}
SERIAL_ECHOLNPAIR("Retrieved measurements: ", temp_comp.get_index());
@ -231,7 +232,9 @@ void GcodeSuite::G76() {
const uint16_t target_bed = temp_comp.probe_calib_bed_temp;
thermalManager.setTargetBed(target_bed);
uint16_t target_probe = temp_comp.cali_info_init[TSI_PROBE].start_temp;
uint16_t target_probe = cali_info_init[TSI_PROBE].start_temp;
report_targets(target_bed, target_probe);
// Wait for heatbed to reach target temp and probe to cool below target temp
wait_for_temps(target_bed, target_probe, next_temp_report);
@ -244,7 +247,7 @@ void GcodeSuite::G76() {
bool timeout = false;
for (;;) {
// Move probe to probing point and wait for it to reach target temperature
do_blocking_move_to_xy(noz_pos);
do_blocking_move_to(noz_pos_xyz);
SERIAL_ECHOLNPAIR("Waiting for probe heating. Bed:", target_bed, " Probe:", target_probe);
const millis_t probe_timeout_ms = millis() + 900UL * 1000UL;
@ -257,16 +260,8 @@ void GcodeSuite::G76() {
}
if (timeout) break;
const float measured_z = g76_probe(noz_pos);
if (isnan(measured_z)) break;
if (target_probe == temp_comp.cali_info_init[TSI_PROBE].start_temp)
temp_comp.prepare_new_calibration(measured_z);
else
temp_comp.push_back_new_measurement(TSI_PROBE, measured_z);
target_probe += temp_comp.cali_info_init[TSI_PROBE].temp_res;
if (target_probe > temp_comp.cali_info_init[TSI_PROBE].end_temp) break;
const float measured_z = g76_probe(TSI_PROBE, target_probe, noz_pos_xyz);
if (isnan(measured_z) || target_probe > cali_info_init[TSI_PROBE].end_temp) break;
}
SERIAL_ECHOLNPAIR("Retrieved measurements: ", temp_comp.get_index());

15
Marlin/src/inc/SanityCheck.h
View File

@ -491,6 +491,21 @@
#error "DUGS_UI_MOVE_DIS_OPTION is spelled DGUS_UI_MOVE_DIS_OPTION. Please update Configuration_adv.h."
#endif
/**
* Probe temp compensation requirements
*/
#if ENABLED(PROBE_TEMP_COMPENSATION)
#if defined(PTC_PARK_POS_X) || defined(PTC_PARK_POS_Y) || defined(PTC_PARK_POS_Z)
#error "PTC_PARK_POS_[XYZ] is now PTC_PARK_POS (array). Please update Configuration_adv.h."
#elif !defined(PTC_PARK_POS)
#error "PROBE_TEMP_COMPENSATION requires PTC_PARK_POS."
#elif defined(PTC_PROBE_POS_X) || defined(PTC_PROBE_POS_Y)
#error "PTC_PROBE_POS_[XY] is now PTC_PROBE_POS (array). Please update Configuration_adv.h."
#elif !defined(PTC_PROBE_POS)
#error "PROBE_TEMP_COMPENSATION requires PTC_PROBE_POS."
#endif
#endif
/**
* Marlin release, version and default string
*/

2
buildroot/share/tests/rambo-tests
View File

@ -50,7 +50,7 @@ opt_set GRID_MAX_POINTS_X 16
opt_set FANMUX0_PIN 53
opt_disable USE_WATCHDOG
opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER LCD_PROGRESS_BAR LCD_PROGRESS_BAR_TEST \
FIX_MOUNTED_PROBE Z_SAFE_HOMING CODEPENDENT_XY_HOMING PIDTEMPBED \
FIX_MOUNTED_PROBE Z_SAFE_HOMING CODEPENDENT_XY_HOMING PIDTEMPBED PROBE_TEMP_COMPENSATION \
PROBING_HEATERS_OFF PROBING_FANS_OFF PROBING_STEPPERS_OFF WAIT_FOR_BED_HEATER \
EEPROM_SETTINGS SDSUPPORT SD_REPRINT_LAST_SELECTED_FILE BINARY_FILE_TRANSFER \
BLINKM PCA9632 RGB_LED RGB_LED_R_PIN RGB_LED_G_PIN RGB_LED_B_PIN LED_CONTROL_MENU \

Write Preview
Loading…
Cancel
Save