Keith Bennett
4 years ago
committed by
Scott Lahteine
Scott Lahteine
4 changed files with 322 additions and 0 deletions
@ -0,0 +1,266 @@ |
|||
/**
|
|||
* Marlin 3D Printer Firmware |
|||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|||
* |
|||
* Based on Sprinter and grbl. |
|||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm |
|||
* |
|||
* This program is free software: you can redistribute it and/or modify |
|||
* it under the terms of the GNU General Public License as published by |
|||
* the Free Software Foundation, either version 3 of the License, or |
|||
* (at your option) any later version. |
|||
* |
|||
* This program is distributed in the hope that it will be useful, |
|||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
|||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
|||
* GNU General Public License for more details. |
|||
* |
|||
* You should have received a copy of the GNU General Public License |
|||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
* |
|||
*/ |
|||
#pragma once |
|||
|
|||
#ifndef BOARD_INFO_NAME |
|||
#define BOARD_INFO_NAME "BTT SKR E3 Turbo" |
|||
#endif |
|||
|
|||
// Onboard I2C EEPROM
|
|||
#define I2C_EEPROM |
|||
#define MARLIN_EEPROM_SIZE 0x1000 // 4KB (AT24C32)
|
|||
|
|||
//
|
|||
// Servos
|
|||
//
|
|||
#define SERVO0_PIN P1_23 |
|||
|
|||
//
|
|||
// TMC StallGuard DIAG pins
|
|||
//
|
|||
#define X_DIAG_PIN P1_29 // X-STOP
|
|||
#define Y_DIAG_PIN P1_28 // Y-STOP
|
|||
#define Z_DIAG_PIN P1_27 // Z-STOP
|
|||
#define E0_DIAG_PIN P1_26 // E0DET
|
|||
#define E1_DIAG_PIN P1_25 // E1DET
|
|||
|
|||
//
|
|||
// Limit Switches
|
|||
#define X_STOP_PIN X_DIAG_PIN |
|||
#define Y_STOP_PIN Y_DIAG_PIN |
|||
#define Z_STOP_PIN Z_DIAG_PIN |
|||
|
|||
//
|
|||
// Z Probe
|
|||
//
|
|||
#ifndef Z_MIN_PROBE_PIN |
|||
#define Z_MIN_PROBE_PIN P1_22 |
|||
#endif |
|||
|
|||
//
|
|||
// Filament Runout Sensor
|
|||
//
|
|||
#define FIL_RUNOUT_PIN P1_26 // E0DET
|
|||
#define FIL_RUNOUT2_PIN P1_25 // E1DET
|
|||
|
|||
//
|
|||
// Power Supply Control
|
|||
//
|
|||
#ifndef PS_ON_PIN |
|||
#define PS_ON_PIN P1_21 |
|||
#endif |
|||
|
|||
// LED driving pin
|
|||
#define NEOPIXEL_PIN P1_24 |
|||
|
|||
//
|
|||
// Power Loss Detection
|
|||
//
|
|||
#ifndef POWER_LOSS_PIN |
|||
#define POWER_LOSS_PIN P1_20 // PWRDET
|
|||
#endif |
|||
|
|||
//
|
|||
// Steppers
|
|||
//
|
|||
#define X_STEP_PIN P1_04 |
|||
#define X_DIR_PIN P1_08 |
|||
#define X_ENABLE_PIN P1_00 |
|||
#ifndef X_CS_PIN |
|||
#define X_CS_PIN P1_01 |
|||
#endif |
|||
|
|||
#define Y_STEP_PIN P1_14 |
|||
#define Y_DIR_PIN P1_15 |
|||
#define Y_ENABLE_PIN P1_09 |
|||
#ifndef Y_CS_PIN |
|||
#define Y_CS_PIN P1_10 |
|||
#endif |
|||
|
|||
#define Z_STEP_PIN P4_29 |
|||
#define Z_DIR_PIN P4_28 |
|||
#define Z_ENABLE_PIN P1_16 |
|||
#ifndef Z_CS_PIN |
|||
#define Z_CS_PIN P1_17 |
|||
#endif |
|||
|
|||
#define E0_STEP_PIN P2_06 |
|||
#define E0_DIR_PIN P2_07 |
|||
#define E0_ENABLE_PIN P0_04 |
|||
#ifndef E0_CS_PIN |
|||
#define E0_CS_PIN P0_05 |
|||
#endif |
|||
|
|||
#define E1_STEP_PIN P2_11 |
|||
#define E1_DIR_PIN P2_12 |
|||
#define E1_ENABLE_PIN P0_21 |
|||
#ifndef E1_CS_PIN |
|||
#define E1_CS_PIN P0_22 |
|||
#endif |
|||
|
|||
#if HAS_TMC_UART |
|||
/**
|
|||
* TMC2208/TMC2209 stepper drivers |
|||
* |
|||
* Hardware serial communication ports. |
|||
* If undefined software serial is used according to the pins below |
|||
*/ |
|||
|
|||
//
|
|||
// Software serial
|
|||
//
|
|||
#define X_SERIAL_TX_PIN P1_01 |
|||
#define X_SERIAL_RX_PIN P1_01 |
|||
|
|||
#define Y_SERIAL_TX_PIN P1_10 |
|||
#define Y_SERIAL_RX_PIN P1_10 |
|||
|
|||
#define Z_SERIAL_TX_PIN P1_17 |
|||
#define Z_SERIAL_RX_PIN P1_17 |
|||
|
|||
#define E0_SERIAL_TX_PIN P0_05 |
|||
#define E0_SERIAL_RX_PIN P0_05 |
|||
|
|||
#define E1_SERIAL_TX_PIN P0_22 |
|||
#define E1_SERIAL_RX_PIN P0_22 |
|||
|
|||
// Reduce baud rate to improve software serial reliability
|
|||
#define TMC_BAUD_RATE 19200 |
|||
#endif |
|||
|
|||
//
|
|||
// TMC Low Power Standby pins
|
|||
//
|
|||
#define X_STDBY_PIN P3_26 |
|||
#define Y_STDBY_PIN P3_25 |
|||
#define Z_STDBY_PIN P1_18 |
|||
#define E0_STDBY_PIN P1_19 |
|||
#define E1_STDBY_PIN P2_13 |
|||
|
|||
//
|
|||
// Temperature Sensors
|
|||
//
|
|||
#define TEMP_0_PIN P0_24 |
|||
#define TEMP_1_PIN P0_23 |
|||
//#define TEMP_2_PIN P1_30 // Onboard thermistor
|
|||
#define TEMP_BED_PIN P0_25 |
|||
|
|||
//
|
|||
// Heaters / Fans
|
|||
//
|
|||
#define HEATER_0_PIN P2_03 // EXTRUDER 0
|
|||
#define HEATER_1_PIN P2_04 // EXTRUDER 1
|
|||
#define HEATER_BED_PIN P2_05 // BED
|
|||
#define FAN_PIN P2_01 |
|||
#define FAN1_PIN P2_02 |
|||
|
|||
//
|
|||
// USB connect control
|
|||
//
|
|||
//#define USB_CONNECT_PIN P0_29
|
|||
//#define USB_CONNECT_INVERTING false
|
|||
|
|||
/**
|
|||
* _____ |
|||
* 5V | 1 2 | GND |
|||
* (LCD_EN) P0_18 | 3 4 | P0_17 (LCD_RS) |
|||
* (LCD_D4) P0_15 | 5 6 P0_20 (BTN_EN2) |
|||
* RESET | 7 8 | P0_19 (BTN_EN1) |
|||
* (BTN_ENC) P0_16 | 9 10| P2_08 (BEEPER) |
|||
* ----- |
|||
* EXP |
|||
*/ |
|||
|
|||
#define EXPA1_03_PIN P0_18 |
|||
#define EXPA1_04_PIN P0_17 |
|||
#define EXPA1_05_PIN P0_15 |
|||
#define EXPA1_06_PIN P0_20 |
|||
#define EXPA1_07_PIN -1 |
|||
#define EXPA1_08_PIN P0_19 |
|||
#define EXPA1_09_PIN P0_16 |
|||
#define EXPA1_10_PIN P2_08 |
|||
|
|||
#if HAS_SPI_LCD |
|||
|
|||
#if ENABLED(CR10_STOCKDISPLAY) |
|||
|
|||
#define BEEPER_PIN EXPA1_10_PIN |
|||
|
|||
#define BTN_EN1 EXPA1_08_PIN |
|||
#define BTN_EN2 EXPA1_06_PIN |
|||
#define BTN_ENC EXPA1_09_PIN |
|||
|
|||
#define LCD_PINS_RS EXPA1_04_PIN |
|||
#define LCD_PINS_ENABLE EXPA1_03_PIN |
|||
#define LCD_PINS_D4 EXPA1_05_PIN |
|||
|
|||
#elif ENABLED(ZONESTAR_LCD) // ANET A8 LCD Controller - Must convert to 3.3V - CONNECTING TO 5V WILL DAMAGE THE BOARD!
|
|||
|
|||
#error "CAUTION! ZONESTAR_LCD requires wiring modifications. See 'pins_BTT_SKR_E3_TURBO.h' for details. Comment out this line to continue." |
|||
|
|||
#define LCD_PINS_RS EXPA1_05_PIN |
|||
#define LCD_PINS_ENABLE EXPA1_09_PIN |
|||
#define LCD_PINS_D4 EXPA1_04_PIN |
|||
#define LCD_PINS_D5 EXPA1_06_PIN |
|||
#define LCD_PINS_D6 EXPA1_08_PIN |
|||
#define LCD_PINS_D7 EXPA1_10_PIN |
|||
#define ADC_KEYPAD_PIN P1_23 // Repurpose servo pin for ADC - CONNECTING TO 5V WILL DAMAGE THE BOARD!
|
|||
|
|||
#elif EITHER(MKS_MINI_12864, ENDER2_STOCKDISPLAY) |
|||
|
|||
#define BTN_EN1 EXPA1_08_PIN |
|||
#define BTN_EN2 EXPA1_06_PIN |
|||
#define BTN_ENC EXPA1_09_PIN |
|||
|
|||
#define DOGLCD_CS EXPA1_04_PIN |
|||
#define DOGLCD_A0 EXPA1_05_PIN |
|||
#define DOGLCD_SCK EXPA1_10_PIN |
|||
#define DOGLCD_MOSI EXPA1_03_PIN |
|||
#define FORCE_SOFT_SPI |
|||
#define LCD_BACKLIGHT_PIN -1 |
|||
|
|||
#else |
|||
|
|||
#error "Only ZONESTAR_LCD, MKS_MINI_12864, ENDER2_STOCKDISPLAY, and CR10_STOCKDISPLAY are currently supported on the BTT_SKR_E3_TURBO." |
|||
|
|||
#endif |
|||
|
|||
#endif // HAS_SPI_LCD
|
|||
|
|||
//
|
|||
// SD Support
|
|||
//
|
|||
#ifndef SDCARD_CONNECTION |
|||
#define SDCARD_CONNECTION ONBOARD |
|||
#endif |
|||
|
|||
#if SD_CONNECTION_IS(ONBOARD) |
|||
#define SD_DETECT_PIN P2_00 |
|||
#define SCK_PIN P0_07 |
|||
#define MISO_PIN P0_08 |
|||
#define MOSI_PIN P0_09 |
|||
#define SS_PIN P0_06 |
|||
#elif SD_CONNECTION_IS(CUSTOM_CABLE) |
|||
#error "SD CUSTOM_CABLE is not compatible with SKR E3 Turbo." |
|||
#endif |
|||
|
|||
#define ON_BOARD_SPI_DEVICE 1 // SPI1
|
|||
Loading…
Reference in new issue