Browse Source

Pins, comment cleanup

vanilla_fb_2.0.x
Scott Lahteine 4 years ago
parent
commit
d6a56b882f
  1. 1
      Marlin/src/inc/Conditionals_LCD.h
  2. 4
      Marlin/src/inc/Conditionals_adv.h
  3. 2
      Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h
  4. 10
      Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3P.h
  5. 7
      Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO.h
  6. 10
      Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h
  7. 2
      Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h
  8. 17
      Marlin/src/pins/stm32f4/pins_MKS_ROBIN_NANO_V3.h
  9. 11
      Marlin/src/pins/stm32f4/pins_MKS_ROBIN_PRO_V2.h
  10. 3
      Marlin/src/pins/stm32f7/pins_NUCLEO_F767ZI.h
  11. 2
      buildroot/share/PlatformIO/variants/BIGTREE_GTR_V1/hal_conf_extra.h
  12. 2
      buildroot/share/PlatformIO/variants/BIGTREE_SKR_PRO_1v1/hal_conf_extra.h
  13. 5
      buildroot/tests/STM32F103VE_longer-tests

1
Marlin/src/inc/Conditionals_LCD.h

@ -833,6 +833,7 @@
#else
// Clear probe pin settings when no probe is selected
#undef Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
#undef USE_PROBE_FOR_Z_HOMING
#endif
#if Z_HOME_DIR > 0

4
Marlin/src/inc/Conditionals_adv.h

@ -382,6 +382,10 @@
#define POLL_JOG
#endif
#ifndef HOMING_BUMP_MM
#define HOMING_BUMP_MM { 0, 0, 0 }
#endif
/**
* Driver Timings (in nanoseconds)
* NOTE: Driver timing order is longest-to-shortest duration.

2
Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h

@ -189,7 +189,7 @@
// Reduce baud rate to improve software serial reliability
#define TMC_BAUD_RATE 19200
#endif // TMC2208 || TMC2209
#endif // HAS_TMC_UART
//
// Temperature Sensors

10
Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3P.h

@ -40,7 +40,6 @@
//
// Release PB4 (Y_ENABLE_PIN) from JTAG NRST role
//
#define DISABLE_DEBUG
//
@ -59,6 +58,11 @@
//
#define SPI_DEVICE 2
//
// Servos
//
#define SERVO0_PIN PA8 // Enable BLTOUCH
//
// Limit Switches
//
@ -155,7 +159,7 @@
// Reduce baud rate to improve software serial reliability
#define TMC_BAUD_RATE 19200
#endif // TMC2208 || TMC2209
#endif // HAS_TMC_UART
//
// Temperature Sensors
@ -200,8 +204,6 @@
#define FIL_RUNOUT_PIN PA4
#endif
#define SERVO0_PIN PA8 // Enable BLTOUCH
//#define LED_PIN PB2
//

7
Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO.h

@ -56,6 +56,11 @@
#define SPI_DEVICE 2
//
// Servos
//
#define SERVO0_PIN PA8 // Enable BLTOUCH
//
// Limit Switches
//
@ -148,8 +153,6 @@
#define FIL_RUNOUT2_PIN PE6
#endif
#define SERVO0_PIN PA8 // Enable BLTOUCH support
//#define LED_PIN PB2
//

10
Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h

@ -43,7 +43,6 @@
//
// Release PB4 (Y_ENABLE_PIN) from JTAG NRST role
//
#define DISABLE_DEBUG
//
@ -62,6 +61,11 @@
//
#define SPI_DEVICE 2
//
// Servos
//
#define SERVO0_PIN PA8 // Enable BLTOUCH
//
// Limit Switches
//
@ -163,7 +167,7 @@
// Reduce baud rate to improve software serial reliability
#define TMC_BAUD_RATE 19200
#endif // TMC2208 || TMC2209
#endif // HAS_TMC_UART
//
// Temperature Sensors
@ -218,8 +222,6 @@
#define FIL_RUNOUT2_PIN PE6
#endif
#define SERVO0_PIN PA8 // Enable BLTOUCH
//#define LED_PIN PB2
//

2
Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h

@ -48,7 +48,7 @@
//
// Servos
//
#define SERVO0_PIN PA8 // BLTOUCH
#define SERVO0_PIN PA8 // Enable BLTOUCH
//
// Limit Switches

17
Marlin/src/pins/stm32f4/pins_MKS_ROBIN_NANO_V3.h

@ -31,6 +31,9 @@
#define BOARD_INFO_NAME "MKS Robin Nano V3"
// USB Flash Drive support
#define HAS_OTG_USB_HOST_SUPPORT
// Avoid conflict with TIMER_TONE
#define STEP_TIMER 10
@ -42,6 +45,12 @@
//
// Release PB4 (Z_DIR_PIN) from JTAG NRST role
//
//#define DISABLE_DEBUG
//
// Servos
//
#define SERVO0_PIN PA8 // Enable BLTOUCH
//
// Limit Switches
@ -98,8 +107,8 @@
//
// Software SPI pins for TMC2130 stepper drivers
// This board only supports SW SPI for stepper drivers
//
// This board only support SW SPI for stepper drivers
#if HAS_TMC_SPI
#define TMC_USE_SW_SPI
#endif
@ -179,6 +188,7 @@
#define POWER_LOSS_PIN PW_DET
#define PS_ON_PIN PW_OFF
//
// Enable MKSPWC support
//
@ -186,11 +196,10 @@
//#define KILL_PIN PA2
//#define KILL_PIN_INVERTING true
#define SERVO0_PIN PA8 // Enable BLTOUCH support
//#define LED_PIN PB2
// Random Info
#define USB_SERIAL -1 //Usb Serial
#define USB_SERIAL -1 // USB Serial
#define WIFI_SERIAL 3 // USART3
#define MKS_WIFI_MODULE_SERIAL 1 // USART1
#define MKS_WIFI_MODULE_SPI 2 // SPI2
@ -346,5 +355,3 @@
#endif // !MKS_MINI_12864
#endif // HAS_SPI_LCD
#define HAS_OTG_USB_HOST_SUPPORT

11
Marlin/src/pins/stm32f4/pins_MKS_ROBIN_PRO_V2.h

@ -40,12 +40,18 @@
//
// Release PB4 (Y_ENABLE_PIN) from JTAG NRST role
//
//#define DISABLE_DEBUG
//
// Note: MKS Robin board is using SPI2 interface.
//
//#define SPI_MODULE 2
//
// Servos
//
#define SERVO0_PIN PA8 // Enable BLTOUCH
//
// Limit Switches
//
@ -55,8 +61,6 @@
#define E0_DIAG_PIN PC4
#define E1_DIAG_PIN PE7
//
#define X_STOP_PIN PA15
#define Y_STOP_PIN PA12
#define Z_MIN_PIN PA11
@ -159,7 +163,7 @@
// Reduce baud rate to improve software serial reliability
#define TMC_BAUD_RATE 19200
#endif // TMC2208 || TMC2209
#endif // HAS_TMC_UART
//
// Temperature Sensors
@ -191,7 +195,6 @@
//#define SUICIDE_PIN PB2 // Enable MKSPWC support
//#define KILL_PIN PA2 // Enable MKSPWC support
//#define KILL_PIN_INVERTING true // Enable MKSPWC support
#define SERVO0_PIN PA8 // Enable BLTOUCH support
//#define LED_PIN PB2
#ifndef SDCARD_CONNECTION

3
Marlin/src/pins/stm32f7/pins_NUCLEO_F767ZI.h

@ -188,9 +188,6 @@
#define LCD_PINS_RS PF12 // LCD_RS
#define LCD_PINS_ENABLE PD15 // LCD_EN
#define LCD_PINS_D4 PB13 // LCD_D4
// #define LCD_PINS_D5
// #define LCD_PINS_D6
// #define LCD_PINS_D7
#define BTN_EN1 PF13 // BTN_EN1
#define BTN_EN2 PE9 // BTN_EN2

2
buildroot/share/PlatformIO/variants/BIGTREE_GTR_V1/hal_conf_extra.h

@ -44,7 +44,7 @@
#undef HAL_IRDA_MODULE_ENABLED
#undef HAL_SMARTCARD_MODULE_ENABLED
#undef HAL_WWDG_MODULE_ENABLED
#undef HAL_HCD_MODULE_ENABLED
//#undef HAL_HCD_MODULE_ENABLED
#undef HAL_FMPI2C_MODULE_ENABLED
#undef HAL_SPDIFRX_MODULE_ENABLED
#undef HAL_DFSDM_MODULE_ENABLED

2
buildroot/share/PlatformIO/variants/BIGTREE_SKR_PRO_1v1/hal_conf_extra.h

@ -44,7 +44,7 @@
#undef HAL_IRDA_MODULE_ENABLED
#undef HAL_SMARTCARD_MODULE_ENABLED
#undef HAL_WWDG_MODULE_ENABLED
#undef HAL_HCD_MODULE_ENABLED
//#undef HAL_HCD_MODULE_ENABLED
#undef HAL_FMPI2C_MODULE_ENABLED
#undef HAL_SPDIFRX_MODULE_ENABLED
#undef HAL_DFSDM_MODULE_ENABLED

5
buildroot/tests/STM32F103VE_longer-tests

@ -11,9 +11,8 @@ opt_enable BAUD_RATE_GCODE
exec_test $1 $2 "CLASSIC_UI U20 config" "$3"
use_example_configs Alfawise/U20
opt_enable BAUD_RATE_GCODE
opt_enable TFT_COLOR_UI
opt_disable TFT_CLASSIC_UI
opt_enable BAUD_RATE_GCODE TFT_COLOR_UI
opt_disable TFT_CLASSIC_UI CUSTOM_STATUS_SCREEN_IMAGE
exec_test $1 $2 "COLOR_UI U20 config" "$3"
use_example_configs Alfawise/U20-bltouch

Loading…
Cancel
Save