andrey
/
Marlin_FB4S
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

Adjust Travis CI tests

pull/1/head
Scott Lahteine 6 years ago
parent
d6d48e63fb
commit
d52deeb15a
7 changed files with 69 additions and 37 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Unified View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 4
      .travis.yml
  2. 3
      buildroot/share/tests/DUE_tests
  3. 3
      buildroot/share/tests/LPC1768_tests
  4. 3
      buildroot/share/tests/STM32F1_tests
  5. 72
      buildroot/share/tests/megaatmega2560_tests
  6. 5
      buildroot/share/tests/run_tests
  7. 16
      buildroot/share/tests/teensy35_tests

4
.travis.yml
View File

@ -17,8 +17,8 @@ cache:
env: env:
- TEST_PLATFORM="megaatmega2560" - TEST_PLATFORM="megaatmega2560"
- TEST_PLATFORM="LPC1768"
- TEST_PLATFORM="DUE" - TEST_PLATFORM="DUE"
- TEST_PLATFORM="LPC1768"
- TEST_PLATFORM="STM32F1" - TEST_PLATFORM="STM32F1"
- TEST_PLATFORM="teensy35" - TEST_PLATFORM="teensy35"
@ -49,4 +49,4 @@ before_script:
- cat ${TRAVIS_BUILD_DIR}/Marlin/src/inc/_Version.h - cat ${TRAVIS_BUILD_DIR}/Marlin/src/inc/_Version.h
# #
script: script:
- start_tests ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM} - run_tests ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}

3
buildroot/share/tests/DUE_tests
View File

@ -1,4 +1,7 @@
#!/usr/bin/env bash #!/usr/bin/env bash
#
# Build tests for DUE (Atmel SAM3X8E ARM Cortex-M3)
#
# exit on first failure # exit on first failure
set -e set -e

3
buildroot/share/tests/LPC1768_tests
View File

@ -1,4 +1,7 @@
#!/usr/bin/env bash #!/usr/bin/env bash
#
# Build tests for LPC1768 (NXP ARM Cortex-M3)
#
# exit on first failure # exit on first failure
set -e set -e

3
buildroot/share/tests/STM32F1_tests
View File

@ -1,4 +1,7 @@
#!/usr/bin/env bash #!/usr/bin/env bash
#
# Build tests for STM32F103RE
#
# exit on first failure # exit on first failure
set -e set -e

72
buildroot/share/tests/megaatmega2560_tests
View File

@ -1,4 +1,7 @@
#!/usr/bin/env bash #!/usr/bin/env bash
#
# Build tests for AVR
#
# exit on first failure # exit on first failure
set -e set -e
@ -7,11 +10,13 @@ set -e
# Backup pins_RAMPS.h # Backup pins_RAMPS.h
# #
cp Marlin/src/pins/pins_RAMPS.h Marlin/src/pins/pins_RAMPS.h.backup cp Marlin/src/pins/pins_RAMPS.h Marlin/src/pins/pins_RAMPS.h.backup
# #
# Build with the default configurations # Build with the default configurations
# #
restore_configs restore_configs
exec_test $1 $2 "Default Configuration" exec_test $1 $2 "Default Configuration"
# #
# Test 2 extruders (one MAX6675) and heated bed on basic RAMPS 1.4 # Test 2 extruders (one MAX6675) and heated bed on basic RAMPS 1.4
# Test a "Fix Mounted" Probe with Safe Homing, some arc options, # Test a "Fix Mounted" Probe with Safe Homing, some arc options,
@ -23,15 +28,18 @@ opt_set TEMP_SENSOR_0 -2
opt_set TEMP_SENSOR_1 1 opt_set TEMP_SENSOR_1 1
opt_set TEMP_SENSOR_BED 1 opt_set TEMP_SENSOR_BED 1
opt_set POWER_SUPPLY 1 opt_set POWER_SUPPLY 1
opt_set GRID_MAX_POINTS_X 16
opt_enable PIDTEMPBED FIX_MOUNTED_PROBE Z_SAFE_HOMING \ opt_enable PIDTEMPBED FIX_MOUNTED_PROBE Z_SAFE_HOMING \
REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT EEPROM_SETTINGS PINS_DEBUGGING \ REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT EEPROM_SETTINGS PINS_DEBUGGING \
BLINKM PCA9632 RGB_LED NEOPIXEL_LED AUTO_POWER_CONTROL NOZZLE_PARK_FEATURE FILAMENT_RUNOUT_SENSOR \ BLINKM PCA9632 RGB_LED NEOPIXEL_LED AUTO_POWER_CONTROL NOZZLE_PARK_FEATURE FILAMENT_RUNOUT_SENSOR \
AUTO_BED_LEVELING_LINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE SKEW_CORRECTION SKEW_CORRECTION_FOR_Z SKEW_CORRECTION_GCODE AUTO_BED_LEVELING_LINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \
opt_enable_adv ARC_P_CIRCLES ADVANCED_PAUSE_FEATURE CNC_WORKSPACE_PLANES CNC_COORDINATE_SYSTEMS POWER_LOSS_RECOVERY POWER_LOSS_PIN POWER_LOSS_STATE \ SKEW_CORRECTION SKEW_CORRECTION_FOR_Z SKEW_CORRECTION_GCODE
opt_enable_adv ARC_P_CIRCLES ADVANCED_PAUSE_FEATURE CNC_WORKSPACE_PLANES CNC_COORDINATE_SYSTEMS \
POWER_LOSS_RECOVERY POWER_LOSS_PIN POWER_LOSS_STATE \
FWRETRACT MAX7219_DEBUG LED_CONTROL_MENU CASE_LIGHT_ENABLE CASE_LIGHT_USE_NEOPIXEL CODEPENDENT_XY_HOMING FWRETRACT MAX7219_DEBUG LED_CONTROL_MENU CASE_LIGHT_ENABLE CASE_LIGHT_USE_NEOPIXEL CODEPENDENT_XY_HOMING
opt_set GRID_MAX_POINTS_X 16
opt_set_adv FANMUX0_PIN 53 opt_set_adv FANMUX0_PIN 53
exec_test $1 $2 "Extruders(2) MAX6675 Fixed Probe etc" exec_test $1 $2 "RAMPS with 2 extruders, RRDFGSC, Linear ABL, LEDs, and many options"
# #
# Test a probeless build of AUTO_BED_LEVELING_UBL, with lots of extruders # Test a probeless build of AUTO_BED_LEVELING_UBL, with lots of extruders
# #
@ -47,7 +55,8 @@ opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 DEBUG_LEVELING_FEATU
EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT
opt_enable_adv USB_FLASH_DRIVE_SUPPORT SDCARD_SORT_ALPHA STATUS_MESSAGE_SCROLLING SCROLL_LONG_FILENAMES LIGHTWEIGHT_UI \ opt_enable_adv USB_FLASH_DRIVE_SUPPORT SDCARD_SORT_ALPHA STATUS_MESSAGE_SCROLLING SCROLL_LONG_FILENAMES LIGHTWEIGHT_UI \
CUSTOM_USER_MENUS I2C_POSITION_ENCODERS BABYSTEPPING BABYSTEP_XY LIN_ADVANCE NANODLP_Z_SYNC QUICK_HOME JUNCTION_DEVIATION CUSTOM_USER_MENUS I2C_POSITION_ENCODERS BABYSTEPPING BABYSTEP_XY LIN_ADVANCE NANODLP_Z_SYNC QUICK_HOME JUNCTION_DEVIATION
exec_test $1 $2 "Probeless build of AUTO_BED_LEVELING_UBL, with lots of extruders" exec_test $1 $2 "Azteeg X3 with 5 extruders, RRDFGSC, probeless UBL, Linear Advance, and more"
# #
# Add a Sled Z Probe, use UBL Cartesian moves, use Japanese language # Add a Sled Z Probe, use UBL Cartesian moves, use Japanese language
# #
@ -55,7 +64,8 @@ opt_enable Z_PROBE_SLED SKEW_CORRECTION SKEW_CORRECTION_FOR_Z SKEW_CORRECTION_GC
opt_set LCD_LANGUAGE jp-kana opt_set LCD_LANGUAGE jp-kana
opt_disable SEGMENT_LEVELED_MOVES opt_disable SEGMENT_LEVELED_MOVES
opt_enable_adv BABYSTEP_ZPROBE_OFFSET DOUBLECLICK_FOR_Z_BABYSTEPPING BABYSTEP_HOTEND_Z_OFFSET opt_enable_adv BABYSTEP_ZPROBE_OFFSET DOUBLECLICK_FOR_Z_BABYSTEPPING BABYSTEP_HOTEND_Z_OFFSET
exec_test $1 $2 "Add a Sled Z Probe, use UBL Cartesian moves, use Japanese language" exec_test $1 $2 "... Sled Z Probe, Skew, UBL Cartesian moves, Japanese, and Z probe BABYSTEPPING"
# #
# Test a Servo Probe # Test a Servo Probe
# ...with AUTO_BED_LEVELING_3POINT, DEBUG_LEVELING_FEATURE, EEPROM_SETTINGS, EEPROM_CHITCHAT, EXTENDED_CAPABILITIES_REPORT, and AUTO_REPORT_TEMPERATURES # ...with AUTO_BED_LEVELING_3POINT, DEBUG_LEVELING_FEATURE, EEPROM_SETTINGS, EEPROM_CHITCHAT, EXTENDED_CAPABILITIES_REPORT, and AUTO_REPORT_TEMPERATURES
@ -65,27 +75,24 @@ opt_enable Z_PROBE_SERVO_NR Z_SERVO_ANGLES DEACTIVATE_SERVOS_AFTER_MOVE \
AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE EEPROM_SETTINGS EEPROM_CHITCHAT AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE EEPROM_SETTINGS EEPROM_CHITCHAT
opt_set NUM_SERVOS 1 opt_set NUM_SERVOS 1
opt_enable_adv NO_VOLUMETRICS EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES AUTOTEMP G38_PROBE_TARGET opt_enable_adv NO_VOLUMETRICS EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES AUTOTEMP G38_PROBE_TARGET
exec_test $1 $2 "Servo Probe with AUTO_BED_LEVELING_3POINT, DEBUG_LEVELING_FEATURE, EEPROM_SETTINGS etc" exec_test $1 $2 "RAMPS with Servo Probe, 3-Point ABL, DEBUG_LEVELING_FEATURE, EEPROM, G38, and more"
# #
# Test MESH_BED_LEVELING feature, with LCD # Test MESH_BED_LEVELING feature, with LCD
# #
restore_configs restore_configs
opt_enable MESH_BED_LEVELING G26_MESH_EDITING MESH_G28_REST_ORIGIN LCD_BED_LEVELING ULTIMAKERCONTROLLER opt_enable MESH_BED_LEVELING G26_MESH_EDITING MESH_G28_REST_ORIGIN LCD_BED_LEVELING ULTIMAKERCONTROLLER
exec_test $1 $2 "MESH_BED_LEVELING feature, with LCD" exec_test $1 $2 "MESH_BED_LEVELING feature, with LCD"
# #
# Test MINIRAMBO for PWM_MOTOR_CURRENT # Test MINIRAMBO with PWM_MOTOR_CURRENT and many features
# PROBE_MANUALLY feature, with LCD support,
# ULTIMAKERCONTROLLER, FILAMENT_LCD_DISPLAY, FILAMENT_WIDTH_SENSOR,
# PRINTCOUNTER, NOZZLE_PARK_FEATURE, NOZZLE_CLEAN_FEATURE, PCA9632,
# Z_DUAL_ENDSTOPS, BEZIER_CURVE_SUPPORT, EXPERIMENTAL_I2CBUS,
# ADVANCED_PAUSE_FEATURE, ADVANCED_PAUSE_CONTINUOUS_PURGE, PARK_HEAD_ON_PAUSE, LCD_INFO_MENU,
# EEPROM_SETTINGS, EEPROM_CHITCHAT, M100_FREE_MEMORY_WATCHER,
# INCH_MODE_SUPPORT, TEMPERATURE_UNITS_SUPPORT
# #
restore_configs restore_configs
opt_set MOTHERBOARD BOARD_MINIRAMBO opt_set MOTHERBOARD BOARD_MINIRAMBO
opt_enable PROBE_MANUALLY AUTO_BED_LEVELING_BILINEAR G26_MESH_EDITING LCD_BED_LEVELING ULTIMAKERCONTROLLER \ opt_enable PROBE_MANUALLY AUTO_BED_LEVELING_BILINEAR G26_MESH_EDITING LCD_BED_LEVELING \
EEPROM_SETTINGS EEPROM_CHITCHAT M100_FREE_MEMORY_WATCHER M100_FREE_MEMORY_DUMPER M100_FREE_MEMORY_CORRUPTOR INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT \ EEPROM_SETTINGS EEPROM_CHITCHAT \
M100_FREE_MEMORY_WATCHER M100_FREE_MEMORY_DUMPER M100_FREE_MEMORY_CORRUPTOR \
INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT \
ULTIMAKERCONTROLLER SDSUPPORT \ ULTIMAKERCONTROLLER SDSUPPORT \
PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE PCA9632 PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE PCA9632
opt_enable_adv BEZIER_CURVE_SUPPORT EXPERIMENTAL_I2CBUS \ opt_enable_adv BEZIER_CURVE_SUPPORT EXPERIMENTAL_I2CBUS \
@ -94,6 +101,7 @@ opt_enable_adv BEZIER_CURVE_SUPPORT EXPERIMENTAL_I2CBUS \
opt_set_adv PWM_MOTOR_CURRENT "{ 1300, 1300, 1250 }" opt_set_adv PWM_MOTOR_CURRENT "{ 1300, 1300, 1250 }"
opt_set_adv I2C_SLAVE_ADDRESS 63 opt_set_adv I2C_SLAVE_ADDRESS 63
exec_test $1 $2 "MINIRAMBO for PWM_MOTOR_CURRENT etc" exec_test $1 $2 "MINIRAMBO for PWM_MOTOR_CURRENT etc"
# #
# Mixing Extruder with 5 steppers, Cyrillic # Mixing Extruder with 5 steppers, Cyrillic
# #
@ -103,6 +111,7 @@ opt_enable MIXING_EXTRUDER CR10_STOCKDISPLAY
opt_set MIXING_STEPPERS 5 opt_set MIXING_STEPPERS 5
opt_set LCD_LANGUAGE ru opt_set LCD_LANGUAGE ru
exec_test $1 $2 "Mixing Extruder with 5 steppers, Cyrillic" exec_test $1 $2 "Mixing Extruder with 5 steppers, Cyrillic"
# #
# Test DUAL_X_CARRIAGE # Test DUAL_X_CARRIAGE
# #
@ -113,6 +122,7 @@ opt_set TEMP_SENSOR_1 1
opt_enable USE_XMAX_PLUG opt_enable USE_XMAX_PLUG
opt_enable_adv DUAL_X_CARRIAGE opt_enable_adv DUAL_X_CARRIAGE
exec_test $1 $2 "DUAL_X_CARRIAGE" exec_test $1 $2 "DUAL_X_CARRIAGE"
# #
# Test SPEAKER with BOARD_BQ_ZUM_MEGA_3D and BQ_LCD_SMART_CONTROLLER # Test SPEAKER with BOARD_BQ_ZUM_MEGA_3D and BQ_LCD_SMART_CONTROLLER
# #
@ -121,17 +131,22 @@ exec_test $1 $2 "DUAL_X_CARRIAGE"
#opt_set LCD_FEEDBACK_FREQUENCY_DURATION_MS 10 #opt_set LCD_FEEDBACK_FREQUENCY_DURATION_MS 10
#opt_set LCD_FEEDBACK_FREQUENCY_HZ 100 #opt_set LCD_FEEDBACK_FREQUENCY_HZ 100
#opt_enable BQ_LCD_SMART_CONTROLLER SPEAKER #opt_enable BQ_LCD_SMART_CONTROLLER SPEAKER
# #
# Enable COREXY # Enable COREXY
# #
#restore_configs #restore_configs
#opt_enable COREXY #opt_enable COREXY
#exec_test $1 $2 "Stuff" #exec_test $1 $2 "Stuff"
# #
# Test many less common options # Test many less common options
# #
restore_configs restore_configs
opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO
opt_set EXTRUDERS 2
opt_set TEMP_SENSOR_1 -4
opt_set SERVO_DELAY "{ 300, 300, 300 }"
opt_enable COREYX USE_XMAX_PLUG \ opt_enable COREYX USE_XMAX_PLUG \
REPRAP_DISCOUNT_SMART_CONTROLLER BABYSTEPPING DAC_MOTOR_CURRENT_DEFAULT \ REPRAP_DISCOUNT_SMART_CONTROLLER BABYSTEPPING DAC_MOTOR_CURRENT_DEFAULT \
FILAMENT_LCD_DISPLAY FILAMENT_WIDTH_SENSOR \ FILAMENT_LCD_DISPLAY FILAMENT_WIDTH_SENSOR \
@ -140,16 +155,13 @@ opt_enable COREYX USE_XMAX_PLUG \
opt_set_adv FAN_MIN_PWM 50 opt_set_adv FAN_MIN_PWM 50
opt_set_adv FAN_KICKSTART_TIME 100 opt_set_adv FAN_KICKSTART_TIME 100
opt_set_adv XY_FREQUENCY_LIMIT 15 opt_set_adv XY_FREQUENCY_LIMIT 15
opt_enable_adv SHOW_TEMP_ADC_VALUES HOME_Y_BEFORE_X EMERGENCY_PARSER FAN_KICKSTART_TIME \ opt_enable_adv SHOW_TEMP_ADC_VALUES HOME_Y_BEFORE_X EMERGENCY_PARSER \
ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED ADVANCED_OK \ ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED ADVANCED_OK \
VOLUMETRIC_DEFAULT_ON NO_WORKSPACE_OFFSETS ACTION_ON_KILL \ VOLUMETRIC_DEFAULT_ON NO_WORKSPACE_OFFSETS ACTION_ON_KILL \
EXTRA_FAN_SPEED FWERETRACT Z_DUAL_STEPPER_DRIVERS Z_DUAL_ENDSTOPS \ EXTRA_FAN_SPEED FWERETRACT Z_DUAL_STEPPER_DRIVERS Z_DUAL_ENDSTOPS \
MENU_ADDAUTOSTART SDCARD_SORT_ALPHA MENU_ADDAUTOSTART SDCARD_SORT_ALPHA
opt_set EXTRUDERS 2
opt_set TEMP_SENSOR_1 -4
opt_set SERVO_DELAY "{ 300, 300, 300 }"
exec_test $1 $2 "Many less common options" exec_test $1 $2 "Many less common options"
#
######## Other Standard LCD/Panels ############## ######## Other Standard LCD/Panels ##############
# #
# ULTRA_LCD # ULTRA_LCD
@ -189,12 +201,6 @@ exec_test $1 $2 "Many less common options"
#opt_set_adv SDSORT_CACHE_NAMES true #opt_set_adv SDSORT_CACHE_NAMES true
#exec_test $1 $2 "Stuff" #exec_test $1 $2 "Stuff"
# #
# Test a full-featured CR-10S config
#
use_example_configs Creality/CR-10S
opt_enable SHOW_CUSTOM_BOOTSCREEN
exec_test $1 $2 "Full-featured CR-10S config"
#
# REPRAPWORLD_KEYPAD # REPRAPWORLD_KEYPAD
# #
# Cant find configuration details to get it to compile # Cant find configuration details to get it to compile
@ -207,7 +213,7 @@ exec_test $1 $2 "Full-featured CR-10S config"
#restore_configs #restore_configs
#opt_enable RA_CONTROL_PANEL PINS_DEBUGGING #opt_enable RA_CONTROL_PANEL PINS_DEBUGGING
#exec_test $1 $2 "Stuff" #exec_test $1 $2 "Stuff"
#
######## I2C LCD/PANELS ############## ######## I2C LCD/PANELS ##############
# #
# !!!ATTENTION!!! # !!!ATTENTION!!!
@ -237,6 +243,7 @@ exec_test $1 $2 "Full-featured CR-10S config"
#restore_configs #restore_configs
#opt_enable LCM1602 #opt_enable LCM1602
#exec_test $1 $2 "Stuff" #exec_test $1 $2 "Stuff"
# #
# Language files test with REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER # Language files test with REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
# #
@ -247,9 +254,14 @@ exec_test $1 $2 "Full-featured CR-10S config"
#restore_configs #restore_configs
#opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT #opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT
#for lang in an bg ca zh_CN zh_TW cz da de el el-gr en es eu fi fr gl hr it jp-kana nl pl pt pt-br ru sk tr uk test; do opt_set LCD_LANGUAGE $lang; echo "compile with language $lang ..."; exec_test $1 $2 "Stuff"; done #for lang in an bg ca zh_CN zh_TW cz da de el el-gr en es eu fi fr gl hr it jp-kana nl pl pt pt-br ru sk tr uk test; do opt_set LCD_LANGUAGE $lang; echo "compile with language $lang ..."; exec_test $1 $2 "Stuff"; done
######## Example Configurations ##############
# #
# Test a full-featured CR-10S config
# #
######## Example Configurations ############## use_example_configs Creality/CR-10S
opt_enable SHOW_CUSTOM_BOOTSCREEN
exec_test $1 $2 "Full-featured CR-10S config"
# #
# BQ Hephestos 2 # BQ Hephestos 2
#restore_configs #restore_configs

5
buildroot/share/tests/start_tests → buildroot/share/tests/run_tests
View File

@ -1,4 +1,7 @@
#!/usr/bin/env bash #!/usr/bin/env bash
#
# run_tests
#
export PATH="$PATH:$( cd "$(dirname "${BASH_SOURCE[0]}")" ; pwd -P )" export PATH="$PATH:$( cd "$(dirname "${BASH_SOURCE[0]}")" ; pwd -P )"
export PATH="$PATH:./buildroot/bin" export PATH="$PATH:./buildroot/bin"
@ -27,7 +30,7 @@ fi
if [[ $2 = "ALL" ]]; then if [[ $2 = "ALL" ]]; then
dir_list=("$(dirname "${BASH_SOURCE[0]}")"/*) dir_list=("$(dirname "${BASH_SOURCE[0]}")"/*)
declare -a tests=(${dir_list[@]/*start_tests/}) declare -a tests=(${dir_list[@]/*run_tests/})
for f in "${tests[@]}"; do for f in "${tests[@]}"; do
env_backup env_backup
testenv=$(basename $f | cut -d"_" -f1) testenv=$(basename $f | cut -d"_" -f1)

16
buildroot/share/tests/teensy35_tests
View File

@ -1,4 +1,7 @@
#!/usr/bin/env bash #!/usr/bin/env bash
#
# Build tests for Teensy 3.5/3.6 (ARM Cortex-M4)
#
# exit on first failure # exit on first failure
set -e set -e
@ -6,10 +9,8 @@ set -e
restore_configs restore_configs
opt_set MOTHERBOARD BOARD_TEENSY35_36 opt_set MOTHERBOARD BOARD_TEENSY35_36
cp Marlin/src/pins/pins_RAMPS.h Marlin/src/pins/pins_RAMPS.h.backup cp Marlin/src/pins/pins_RAMPS.h Marlin/src/pins/pins_RAMPS.h.backup
#
# Test Teensy3.5 with default config
#
exec_test $1 $2 "Teensy3.5 with default config" exec_test $1 $2 "Teensy3.5 with default config"
# #
# Test as many features together as possible # Test as many features together as possible
# #
@ -26,7 +27,8 @@ opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT \
opt_enable_adv ADVANCED_PAUSE_FEATURE LCD_INFO_MENU ARC_SUPPORT BEZIER_CURVE_SUPPORT EXPERIMENTAL_I2CBUS EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES SDCARD_SORT_ALPHA PARK_HEAD_ON_PAUSE opt_enable_adv ADVANCED_PAUSE_FEATURE LCD_INFO_MENU ARC_SUPPORT BEZIER_CURVE_SUPPORT EXPERIMENTAL_I2CBUS EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES SDCARD_SORT_ALPHA PARK_HEAD_ON_PAUSE
opt_set_adv I2C_SLAVE_ADDRESS 63 opt_set_adv I2C_SLAVE_ADDRESS 63
opt_set GRID_MAX_POINTS_X 16 opt_set GRID_MAX_POINTS_X 16
exec_test $1 $2 "As many features together as possible" exec_test $1 $2 "Teensy3.5 with many features"
# #
# Test a Sled Z Probe with Linear leveling # Test a Sled Z Probe with Linear leveling
# #
@ -34,6 +36,7 @@ restore_configs
opt_enable EEPROM_SETTINGS \ opt_enable EEPROM_SETTINGS \
Z_PROBE_SLED AUTO_BED_LEVELING_LINEAR DEBUG_LEVELING_FEATURE Z_PROBE_SLED AUTO_BED_LEVELING_LINEAR DEBUG_LEVELING_FEATURE
exec_test $1 $2 "Sled Z Probe with Linear leveling" exec_test $1 $2 "Sled Z Probe with Linear leveling"
# #
# Test a Servo Probe # Test a Servo Probe
# #
@ -48,12 +51,14 @@ exec_test $1 $2 "Sled Z Probe with Linear leveling"
# opt_enable AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE EEPROM_SETTINGS # opt_enable AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE EEPROM_SETTINGS
# opt_enable_adv EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES # opt_enable_adv EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES
# exec_test $1 $2 "...with AUTO_BED_LEVELING_3POINT, DEBUG_LEVELING_FEATURE, EEPROM_SETTINGS, EEPROM_CHITCHAT, EXTENDED_CAPABILITIES_REPORT, and AUTO_REPORT_TEMPERATURES" # exec_test $1 $2 "...with AUTO_BED_LEVELING_3POINT, DEBUG_LEVELING_FEATURE, EEPROM_SETTINGS, EEPROM_CHITCHAT, EXTENDED_CAPABILITIES_REPORT, and AUTO_REPORT_TEMPERATURES"
# #
# Test MESH_BED_LEVELING feature, with LCD # Test MESH_BED_LEVELING feature, with LCD
# #
restore_configs restore_configs
opt_enable MESH_BED_LEVELING MESH_G28_REST_ORIGIN MANUAL_BED_LEVELING ULTIMAKERCONTROLLER opt_enable MESH_BED_LEVELING MESH_G28_REST_ORIGIN MANUAL_BED_LEVELING ULTIMAKERCONTROLLER
exec_test $1 $2 "MESH_BED_LEVELING feature, with LCD" exec_test $1 $2 "MESH_BED_LEVELING feature, with LCD"
# #
# Mixing Extruder # Mixing Extruder
# #
@ -61,6 +66,7 @@ restore_configs
opt_enable MIXING_EXTRUDER DIRECT_MIXING_IN_G1 opt_enable MIXING_EXTRUDER DIRECT_MIXING_IN_G1
opt_set MIXING_STEPPERS 2 opt_set MIXING_STEPPERS 2
exec_test $1 $2 "Mixing Extruder" exec_test $1 $2 "Mixing Extruder"
# #
# Test SWITCHING_EXTRUDER # Test SWITCHING_EXTRUDER
# #
@ -75,12 +81,14 @@ exec_test $1 $2 "Mixing Extruder"
restore_configs restore_configs
opt_enable COREXY opt_enable COREXY
exec_test $1 $2 "COREXY" exec_test $1 $2 "COREXY"
# #
# Enable COREXZ # Enable COREXZ
# #
restore_configs restore_configs
opt_enable COREXZ opt_enable COREXZ
exec_test $1 $2 "COREXZ" exec_test $1 $2 "COREXZ"
# #
# Enable Z_DUAL_STEPPER_DRIVERS, Z_DUAL_ENDSTOPS # Enable Z_DUAL_STEPPER_DRIVERS, Z_DUAL_ENDSTOPS
# #

Write Preview
Loading…
Cancel
Save