Set flags for RAMPS "type" in pins.h

Marlin/pins.h

@@ -42,12 +42,34 @@
 #elif MB(RAMPS_OLD)
   #include "pins_RAMPS_OLD.h"
 #elif MB(RAMPS_13_EFB)
-  #include "pins_RAMPS_13_EFB.h"
-#elif MB(RAMPS_13_EEB) || MB(RAMPS_13_EFF) || MB(RAMPS_13_EEF) || MB(RAMPS_13_SF)
+  #define IS_RAMPS_EFB
+  #include "pins_RAMPS_13.h"
+#elif MB(RAMPS_13_EEB)
+  #define IS_RAMPS_EEB
+  #include "pins_RAMPS_13.h"
+#elif MB(RAMPS_13_EFF)
+  #define IS_RAMPS_EFF
+  #include "pins_RAMPS_13.h"
+#elif MB(RAMPS_13_EEF)
+  #define IS_RAMPS_EEF
+  #include "pins_RAMPS_13.h"
+#elif MB(RAMPS_13_SF)
+  #define IS_RAMPS_SF
   #include "pins_RAMPS_13.h"
 #elif MB(RAMPS_14_EFB)
-  #include "pins_RAMPS_14_EFB.h"
-#elif MB(RAMPS_14_EEB) || MB(RAMPS_14_EFF) || MB(RAMPS_14_EEF) || MB(RAMPS_14_SF)
+  #define IS_RAMPS_EFB
+  #include "pins_RAMPS_14.h"
+#elif MB(RAMPS_14_EEB)
+  #define IS_RAMPS_EEB
+  #include "pins_RAMPS_14.h"
+#elif MB(RAMPS_14_EFF)
+  #define IS_RAMPS_EFF
+  #include "pins_RAMPS_14.h"
+#elif MB(RAMPS_14_EEF)
+  #define IS_RAMPS_EEF
+  #include "pins_RAMPS_14.h"
+#elif MB(RAMPS_14_SF)
+  #define IS_RAMPS_SF
   #include "pins_RAMPS_14.h"
 #elif MB(GEN6)
   #include "pins_GEN6.h"

Marlin/pins_FELIX2.h

@@ -32,7 +32,7 @@
 
 #define HI_VOLT_PIN_D 7
 
-#include "pins_RAMPS_14_EFB.h"
+#include "pins_RAMPS_14.h"
 
 #undef SDPOWER
 #define SDPOWER             1

Marlin/pins_MKS_13.h

@@ -37,7 +37,7 @@
 
 #define HI_VOLT_PIN_D 7
 
-#include "pins_RAMPS_14_EFB.h"
+#include "pins_RAMPS_14.h"
 
 #if ENABLED(VIKI2) || ENABLED(miniVIKI)
   /**

Marlin/pins_MKS_BASE.h

@@ -32,4 +32,4 @@
 
 #define HI_VOLT_PIN_D 7
 
-#include "pins_RAMPS_14_EFB.h"
+#include "pins_RAMPS_14.h"

Marlin/pins_RAMPS_13_EFB.h

@@ -1,32 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-/**
- * Arduino Mega with RAMPS v1.3 pin assignments
- *
- *  RAMPS_13_EFB (Extruder, Fan, Bed)
- */
-
-#define BOARD_NAME "RAMPS 1.3 EFB"
-
-#define IS_RAMPS_13
-#include "pins_RAMPS_14_EFB.h"

Marlin/pins_RAMPS_14.h

@@ -151,30 +151,25 @@
   #define HI_VOLT_PIN_A 10
 #endif
 
-#if ENABLED(IS_RAMPS_EFB)                   // Hotend, Fan, Bed
+#if ENABLED(IS_RAMPS_EFB)                      // Hotend, Fan, Bed
   #define HEATER_0_PIN   HI_VOLT_PIN_A
   #define FAN_PIN        HI_VOLT_PIN_B
   #define HEATER_BED_PIN HI_VOLT_PIN_C
-  #if EXTRUDERS == 1
-    #define FAN1_PIN     HI_VOLT_PIN_D
-  #else
-    #define HEATER_1_PIN HI_VOLT_PIN_D
-  #endif
-#elif MB(RAMPS_13_EEF) || MB(RAMPS_14_EEF)  // Hotend, Hotend, Fan
+#elif ENABLED(IS_RAMPS_EEF)                    // Hotend, Hotend, Fan
   #define HEATER_0_PIN   HI_VOLT_PIN_A
   #define HEATER_1_PIN   HI_VOLT_PIN_B
   #define FAN_PIN        HI_VOLT_PIN_C
-#elif MB(RAMPS_13_EEB) || MB(RAMPS_14_EEB)  // Hotend, Hotend, Bed
+#elif ENABLED(IS_RAMPS_EEB)                    // Hotend, Hotend, Bed
   #define HEATER_0_PIN   HI_VOLT_PIN_A
   #define HEATER_1_PIN   HI_VOLT_PIN_B
   #define HEATER_BED_PIN HI_VOLT_PIN_C
   #define FAN_PIN 4 // IO pin. Buffer needed
-#elif MB(RAMPS_13_EFF) || MB(RAMPS_14_EFF)  // Hotend, Fan, Fan (EFF is reversed?)
+#elif ENABLED(IS_RAMPS_EFF)                    // Hotend, Fan, Fan (EFF is reversed?)
   #define HEATER_0_PIN   HI_VOLT_PIN_C
   #define FAN_PIN        HI_VOLT_PIN_B
   #define FAN1_PIN       HI_VOLT_PIN_A
   #define CONTROLLERFAN_PIN  -1
-#elif MB(RAMPS_13_SF) || MB(RAMPS_14_SF)    // Spindle, Fan
+#elif ENABLED(IS_RAMPS_SF)                     // Spindle, Fan
   #define FAN_PIN        HI_VOLT_PIN_C
 #else                                          // Non-specific are "EFB" by legacy
   #define HEATER_0_PIN   HI_VOLT_PIN_A

Marlin/pins_RAMPS_14_EFB.h

@@ -1,34 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-/**
- * Arduino Mega with RAMPS v1.4 pin assignments
- *
- *  RAMPS_14_EFB (Extruder, Fan, Bed)
- */
-
-#ifndef BOARD_NAME
-  #define BOARD_NAME "RAMPS 1.4 EFB"
-#endif
-
-#define IS_RAMPS_EFB
-#include "pins_RAMPS_14.h"

Marlin/pins_SAINSMART_2IN1.h

@@ -30,8 +30,9 @@
 
 #define BOARD_NAME "Sainsmart"
 
-#define HI_VOLT_PIN_A  9
-#define HI_VOLT_PIN_B  7 // PART FAN in front of board next to Extruder heat
-#define HI_VOLT_PIN_D 10
+#define HI_VOLT_PIN_A  9 // E
+#define HI_VOLT_PIN_B  7 // F PART FAN in front of board next to Extruder heat
+     // HI_VOLT_PIN_C  8 // B
+#define HI_VOLT_PIN_D 10 // F / E
 
-#include "pins_RAMPS_14_EFB.h"
+#include "pins_RAMPS_14.h"