diff --git a/Marlin/pins.h b/Marlin/pins.h
index 8133f4db5b..548d44fdf7 100644
--- a/Marlin/pins.h
+++ b/Marlin/pins.h
@@ -42,12 +42,34 @@
#elif MB(RAMPS_OLD)
#include "pins_RAMPS_OLD.h"
#elif MB(RAMPS_13_EFB)
- #include "pins_RAMPS_13_EFB.h"
-#elif MB(RAMPS_13_EEB) || MB(RAMPS_13_EFF) || MB(RAMPS_13_EEF) || MB(RAMPS_13_SF)
+ #define IS_RAMPS_EFB
+ #include "pins_RAMPS_13.h"
+#elif MB(RAMPS_13_EEB)
+ #define IS_RAMPS_EEB
+ #include "pins_RAMPS_13.h"
+#elif MB(RAMPS_13_EFF)
+ #define IS_RAMPS_EFF
+ #include "pins_RAMPS_13.h"
+#elif MB(RAMPS_13_EEF)
+ #define IS_RAMPS_EEF
+ #include "pins_RAMPS_13.h"
+#elif MB(RAMPS_13_SF)
+ #define IS_RAMPS_SF
#include "pins_RAMPS_13.h"
#elif MB(RAMPS_14_EFB)
- #include "pins_RAMPS_14_EFB.h"
-#elif MB(RAMPS_14_EEB) || MB(RAMPS_14_EFF) || MB(RAMPS_14_EEF) || MB(RAMPS_14_SF)
+ #define IS_RAMPS_EFB
+ #include "pins_RAMPS_14.h"
+#elif MB(RAMPS_14_EEB)
+ #define IS_RAMPS_EEB
+ #include "pins_RAMPS_14.h"
+#elif MB(RAMPS_14_EFF)
+ #define IS_RAMPS_EFF
+ #include "pins_RAMPS_14.h"
+#elif MB(RAMPS_14_EEF)
+ #define IS_RAMPS_EEF
+ #include "pins_RAMPS_14.h"
+#elif MB(RAMPS_14_SF)
+ #define IS_RAMPS_SF
#include "pins_RAMPS_14.h"
#elif MB(GEN6)
#include "pins_GEN6.h"
diff --git a/Marlin/pins_FELIX2.h b/Marlin/pins_FELIX2.h
index 16ad9f4f7f..d164f99c7c 100644
--- a/Marlin/pins_FELIX2.h
+++ b/Marlin/pins_FELIX2.h
@@ -32,7 +32,7 @@
#define HI_VOLT_PIN_D 7
-#include "pins_RAMPS_14_EFB.h"
+#include "pins_RAMPS_14.h"
#undef SDPOWER
#define SDPOWER 1
diff --git a/Marlin/pins_MKS_13.h b/Marlin/pins_MKS_13.h
index e536d870b0..eee34dd6f3 100644
--- a/Marlin/pins_MKS_13.h
+++ b/Marlin/pins_MKS_13.h
@@ -37,7 +37,7 @@
#define HI_VOLT_PIN_D 7
-#include "pins_RAMPS_14_EFB.h"
+#include "pins_RAMPS_14.h"
#if ENABLED(VIKI2) || ENABLED(miniVIKI)
/**
diff --git a/Marlin/pins_MKS_BASE.h b/Marlin/pins_MKS_BASE.h
index 583f82b1dc..92895b1d73 100644
--- a/Marlin/pins_MKS_BASE.h
+++ b/Marlin/pins_MKS_BASE.h
@@ -32,4 +32,4 @@
#define HI_VOLT_PIN_D 7
-#include "pins_RAMPS_14_EFB.h"
\ No newline at end of file
+#include "pins_RAMPS_14.h"
\ No newline at end of file
diff --git a/Marlin/pins_RAMPS_13_EFB.h b/Marlin/pins_RAMPS_13_EFB.h
deleted file mode 100644
index 80e2927293..0000000000
--- a/Marlin/pins_RAMPS_13_EFB.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see .
- *
- */
-
-/**
- * Arduino Mega with RAMPS v1.3 pin assignments
- *
- * RAMPS_13_EFB (Extruder, Fan, Bed)
- */
-
-#define BOARD_NAME "RAMPS 1.3 EFB"
-
-#define IS_RAMPS_13
-#include "pins_RAMPS_14_EFB.h"
diff --git a/Marlin/pins_RAMPS_14.h b/Marlin/pins_RAMPS_14.h
index 2077438220..7cb89e9962 100644
--- a/Marlin/pins_RAMPS_14.h
+++ b/Marlin/pins_RAMPS_14.h
@@ -151,30 +151,25 @@
#define HI_VOLT_PIN_A 10
#endif
-#if ENABLED(IS_RAMPS_EFB) // Hotend, Fan, Bed
+#if ENABLED(IS_RAMPS_EFB) // Hotend, Fan, Bed
#define HEATER_0_PIN HI_VOLT_PIN_A
#define FAN_PIN HI_VOLT_PIN_B
#define HEATER_BED_PIN HI_VOLT_PIN_C
- #if EXTRUDERS == 1
- #define FAN1_PIN HI_VOLT_PIN_D
- #else
- #define HEATER_1_PIN HI_VOLT_PIN_D
- #endif
-#elif MB(RAMPS_13_EEF) || MB(RAMPS_14_EEF) // Hotend, Hotend, Fan
+#elif ENABLED(IS_RAMPS_EEF) // Hotend, Hotend, Fan
#define HEATER_0_PIN HI_VOLT_PIN_A
#define HEATER_1_PIN HI_VOLT_PIN_B
#define FAN_PIN HI_VOLT_PIN_C
-#elif MB(RAMPS_13_EEB) || MB(RAMPS_14_EEB) // Hotend, Hotend, Bed
+#elif ENABLED(IS_RAMPS_EEB) // Hotend, Hotend, Bed
#define HEATER_0_PIN HI_VOLT_PIN_A
#define HEATER_1_PIN HI_VOLT_PIN_B
#define HEATER_BED_PIN HI_VOLT_PIN_C
#define FAN_PIN 4 // IO pin. Buffer needed
-#elif MB(RAMPS_13_EFF) || MB(RAMPS_14_EFF) // Hotend, Fan, Fan (EFF is reversed?)
+#elif ENABLED(IS_RAMPS_EFF) // Hotend, Fan, Fan (EFF is reversed?)
#define HEATER_0_PIN HI_VOLT_PIN_C
#define FAN_PIN HI_VOLT_PIN_B
#define FAN1_PIN HI_VOLT_PIN_A
#define CONTROLLERFAN_PIN -1
-#elif MB(RAMPS_13_SF) || MB(RAMPS_14_SF) // Spindle, Fan
+#elif ENABLED(IS_RAMPS_SF) // Spindle, Fan
#define FAN_PIN HI_VOLT_PIN_C
#else // Non-specific are "EFB" by legacy
#define HEATER_0_PIN HI_VOLT_PIN_A
diff --git a/Marlin/pins_RAMPS_14_EFB.h b/Marlin/pins_RAMPS_14_EFB.h
deleted file mode 100644
index b7282ea561..0000000000
--- a/Marlin/pins_RAMPS_14_EFB.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see .
- *
- */
-
-/**
- * Arduino Mega with RAMPS v1.4 pin assignments
- *
- * RAMPS_14_EFB (Extruder, Fan, Bed)
- */
-
-#ifndef BOARD_NAME
- #define BOARD_NAME "RAMPS 1.4 EFB"
-#endif
-
-#define IS_RAMPS_EFB
-#include "pins_RAMPS_14.h"
diff --git a/Marlin/pins_SAINSMART_2IN1.h b/Marlin/pins_SAINSMART_2IN1.h
index cc74c910a3..c032d4d6fe 100644
--- a/Marlin/pins_SAINSMART_2IN1.h
+++ b/Marlin/pins_SAINSMART_2IN1.h
@@ -30,8 +30,9 @@
#define BOARD_NAME "Sainsmart"
-#define HI_VOLT_PIN_A 9
-#define HI_VOLT_PIN_B 7 // PART FAN in front of board next to Extruder heat
-#define HI_VOLT_PIN_D 10
+#define HI_VOLT_PIN_A 9 // E
+#define HI_VOLT_PIN_B 7 // F PART FAN in front of board next to Extruder heat
+ // HI_VOLT_PIN_C 8 // B
+#define HI_VOLT_PIN_D 10 // F / E
-#include "pins_RAMPS_14_EFB.h"
+#include "pins_RAMPS_14.h"