[2.0.x] Add pin configuration for Fysetc F6 (#11932)

6 years ago · d016b572e3
3 changed files with 197 additions and 0 deletions
--- a/Marlin/src/core/boards.h
+++ b/Marlin/src/core/boards.h
@ -84,6 +84,7 @@
 #define BOARD_TRIGORILLA_14     443   // TriGorilla Anycubic version 1.4 based on RAMPS EFB
 #define BOARD_RAMPS_ENDER_4     243   // Creality: Ender-4, CR-8
 #define BOARD_GT2560_V3         76    // Geeetech A10
+#define BOARD_FYSETC_F6_13      541   // Fysetc F6

 //
 // Other ATmega1280, ATmega2560
--- a/Marlin/src/pins/pins.h
+++ b/Marlin/src/pins/pins.h
@ -152,6 +152,8 @@
  #include "pins_RAMPS_ENDER_4.h"     // ATmega2560                                 env:megaatmega2560
 #elif MB(GT2560_V3)
  #include "pins_GT2560_V3.h"         // ATmega2560                                 env:megaatmega2560
+#elif MB(FYSETC_F6_13)
+  #include "pins_FYSETC_F6_13.h"      // ATmega2560                                 env:megaatmega2560

 //
 // Other ATmega1280, ATmega2560
--- a/Marlin/src/pins/pins_FYSETC_F6_13.h
+++ b/Marlin/src/pins/pins_FYSETC_F6_13.h
@ -0,0 +1,194 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2018 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+//
+// Fysetc F6 pin assignments
+//
+
+#ifndef __AVR_ATmega2560__
+  #error "Oops!  Make sure you have 'FYSETC_F6' selected from the 'Tools -> Boards' menu."
+#endif
+
+#ifndef BOARD_NAME
+  #define BOARD_NAME "FYSETC_F6_13"
+#endif
+
+//
+// Limit Switches
+//
+#define X_MIN_PIN          63
+#define X_MAX_PIN          64
+#define Y_MIN_PIN          14
+#define Y_MAX_PIN          15
+#define Z_MIN_PIN          12
+#define Z_MAX_PIN           9
+
+#ifndef FIL_RUNOUT_PIN
+  #define FIL_RUNOUT_PIN   10
+#endif
+
+//
+// Z Probe (when not Z_MIN_PIN)
+//
+#ifndef Z_MIN_PROBE_PIN
+  #define Z_MIN_PROBE_PIN   9   // Servos pin
+#endif
+
+//
+// Steppers
+//
+#define X_STEP_PIN         54
+#define X_DIR_PIN          55
+#define X_ENABLE_PIN       38
+#ifndef X_CS_PIN
+  #define X_CS_PIN         70
+#endif
+
+#define Y_STEP_PIN         60
+#define Y_DIR_PIN          61
+#define Y_ENABLE_PIN       56
+#ifndef Y_CS_PIN
+  #define Y_CS_PIN         39
+#endif
+
+#define Z_STEP_PIN         43
+#define Z_DIR_PIN          48
+#define Z_ENABLE_PIN       58
+#ifndef Z_CS_PIN
+  #define Z_CS_PIN         74
+#endif
+
+#define E0_STEP_PIN        26
+#define E0_DIR_PIN         28
+#define E0_ENABLE_PIN      24
+#ifndef E0_CS_PIN
+  #define E0_CS_PIN        47
+#endif
+
+#define E1_STEP_PIN        36
+#define E1_DIR_PIN         34
+#define E1_ENABLE_PIN      30
+#ifndef E1_CS_PIN
+  #define E1_CS_PIN        32
+#endif
+
+#define E2_STEP_PIN        59
+#define E2_DIR_PIN         57
+#define E2_ENABLE_PIN      40
+#ifndef E2_CS_PIN
+  #define E2_CS_PIN        42
+#endif
+
+//
+// Sensorless homing DIAG pin is not directly connected to the MCU. Close
+// the jumper next to the limit switch socket when using sensorless homing.
+//
+
+#define X_TMC2130_DIAG     -1
+#define Y_TMC2130_DIAG     -1
+#define Z_TMC2130_DIAG     -1
+#define E0_TMC2130_DIAG    -1
+#define E1_TMC2130_DIAG    -1
+#define E2_TMC2130_DIAG    -1
+
+#if HAS_DRIVER(TMC2208)
+  // Software serial
+  #define X_SERIAL_RX_PIN  71
+  #define X_SERIAL_TX_PIN  72
+  #define Y_SERIAL_RX_PIN  73
+  #define Y_SERIAL_TX_PIN  75
+  #define Z_SERIAL_RX_PIN  78
+  #define Z_SERIAL_TX_PIN  79
+  #define E0_SERIAL_RX_PIN 76
+  #define E0_SERIAL_TX_PIN 77
+  #define E1_SERIAL_RX_PIN 80
+  #define E1_SERIAL_TX_PIN 81
+  #define E2_SERIAL_RX_PIN 22
+  #define E2_SERIAL_TX_PIN 83
+#endif
+
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN         12   // Analog Input
+#define TEMP_1_PIN         13   // Analog Input
+#define TEMP_2_PIN         14   // Analog Input
+#define TEMP_BED_PIN       15   // Analog Input
+
+#ifndef FILWIDTH_PIN
+  #define FILWIDTH_PIN      9   // Analog Input on X+ endstop
+#endif
+
+//
+// Heaters / Fans
+//
+#define HEATER_0_PIN        5
+#define HEATER_1_PIN        6
+#define HEATER_2_PIN        7
+#define HEATER_BED_PIN      8
+
+#define FAN_PIN            44
+#define FAN1_PIN           45
+#define FAN2_PIN           46
+
+//
+// Misc. Functions
+//
+#define SDSS               53
+#define LED_PIN            13
+#define KILL_PIN           41
+
+#ifndef PS_ON_PIN
+  #define PS_ON_PIN        11   // Servos pin
+#endif
+
+#ifndef RGB_LED_R_PIN
+  #define RGB_LED_R_PIN     3
+#endif
+#ifndef RGB_LED_G_PIN
+  #define RGB_LED_G_PIN     4
+#endif
+#ifndef RGB_LED_B_PIN
+  #define RGB_LED_B_PIN     9
+#endif
+#ifndef RGB_LED_W_PIN
+  #define RGB_LED_W_PIN    -1
+#endif
+
+//
+// LCDs and Controllers
+//
+#define BEEPER_PIN         37
+#define SD_DETECT_PIN      49
+
+#define LCD_PINS_RS        16
+#define LCD_PINS_ENABLE    17
+#define LCD_PINS_D4        23
+#define LCD_PINS_D5        25
+#define LCD_PINS_D6        27
+#define LCD_PINS_D7        29
+
+#if ENABLED(NEWPANEL)
+  #define BTN_EN1          31
+  #define BTN_EN2          33
+  #define BTN_ENC          35
+#endif