Allow weird probe values in G33

Marlin/src/gcode/calibrate/G33.cpp

@@ -190,7 +190,7 @@ static float std_dev_points(float z_pt[NPP + 1], const bool _0p_cal, const bool
  */
 static float calibration_probe(const xy_pos_t &xy, const bool stow) {
   #if HAS_BED_PROBE
-    return probe.probe_at_point(xy, stow ? PROBE_PT_STOW : PROBE_PT_RAISE, 0, true);
+    return probe.probe_at_point(xy, stow ? PROBE_PT_STOW : PROBE_PT_RAISE, 0, true, false);
   #else
     UNUSED(stow);
     return lcd_probe_pt(xy);

Marlin/src/module/probe.cpp

@@ -559,7 +559,7 @@ bool Probe::probe_down_to_z(const float z, const feedRate_t fr_mm_s) {
  *
  * @return The Z position of the bed at the current XY or NAN on error.
  */
-float Probe::run_z_probe() {
+float Probe::run_z_probe(const bool sanity_check/*=true*/) {
 
   if (DEBUGGING(LEVELING)) DEBUG_POS(">>> Probe::run_z_probe", current_position);
 
@@ -572,7 +572,7 @@ float Probe::run_z_probe() {
 
     // Do a first probe at the fast speed
     if (probe_down_to_z(z_probe_low_point, MMM_TO_MMS(Z_PROBE_SPEED_FAST))         // No probe trigger?
-      || current_position.z > -offset.z + _MAX(Z_CLEARANCE_BETWEEN_PROBES, 4) / 2  // Probe triggered too high?
+      || (sanity_check && current_position.z > -offset.z + _MAX(Z_CLEARANCE_BETWEEN_PROBES, 4) / 2)  // Probe triggered too high?
     ) {
       if (DEBUGGING(LEVELING)) {
         DEBUG_ECHOLNPGM("FAST Probe fail!");
@@ -617,7 +617,7 @@ float Probe::run_z_probe() {
     {
       // Probe downward slowly to find the bed
       if (probe_down_to_z(z_probe_low_point, MMM_TO_MMS(Z_PROBE_SPEED_SLOW))      // No probe trigger?
-        || current_position.z > -offset.z + _MAX(Z_CLEARANCE_MULTI_PROBE, 4) / 2  // Probe triggered too high?
+        || (sanity_check && current_position.z > -offset.z + _MAX(Z_CLEARANCE_MULTI_PROBE, 4) / 2)  // Probe triggered too high?
       ) {
         if (DEBUGGING(LEVELING)) {
           DEBUG_ECHOLNPGM("SLOW Probe fail!");
@@ -709,7 +709,7 @@ float Probe::run_z_probe() {
  *   - Raise to the BETWEEN height
  * - Return the probed Z position
  */
-float Probe::probe_at_point(const float &rx, const float &ry, const ProbePtRaise raise_after/*=PROBE_PT_NONE*/, const uint8_t verbose_level/*=0*/, const bool probe_relative/*=true*/) {
+float Probe::probe_at_point(const float &rx, const float &ry, const ProbePtRaise raise_after/*=PROBE_PT_NONE*/, const uint8_t verbose_level/*=0*/, const bool probe_relative/*=true*/, const bool sanity_check/*=true*/) {
   if (DEBUGGING(LEVELING)) {
     DEBUG_ECHOLNPAIR(
       ">>> Probe::probe_at_point(", LOGICAL_X_POSITION(rx), ", ", LOGICAL_Y_POSITION(ry),
@@ -751,7 +751,7 @@ float Probe::probe_at_point(const float &rx, const float &ry, const ProbePtRaise
   do_blocking_move_to(npos);
 
   float measured_z = NAN;
-  if (!deploy()) measured_z = run_z_probe() + offset.z;
+  if (!deploy()) measured_z = run_z_probe(sanity_check) + offset.z;
   if (!isnan(measured_z)) {
     const bool big_raise = raise_after == PROBE_PT_BIG_RAISE;
     if (big_raise || raise_after == PROBE_PT_RAISE)

Marlin/src/module/probe.h

@@ -48,8 +48,8 @@ public:
     #ifdef Z_AFTER_PROBING
       static void move_z_after_probing();
     #endif
-    static float probe_at_point(const float &rx, const float &ry, const ProbePtRaise raise_after=PROBE_PT_NONE, const uint8_t verbose_level=0, const bool probe_relative=true);
-    static inline float probe_at_point(const xy_pos_t &pos, const ProbePtRaise raise_after=PROBE_PT_NONE, const uint8_t verbose_level=0, const bool probe_relative=true) {
+    static float probe_at_point(const float &rx, const float &ry, const ProbePtRaise raise_after=PROBE_PT_NONE, const uint8_t verbose_level=0, const bool probe_relative=true, const bool sanity_check=true);
+    static inline float probe_at_point(const xy_pos_t &pos, const ProbePtRaise raise_after=PROBE_PT_NONE, const uint8_t verbose_level=0, const bool probe_relative=true, const bool sanity_check=true) {
       return probe_at_point(pos.x, pos.y, raise_after, verbose_level, probe_relative);
     }
     #if HAS_HEATED_BED && ENABLED(WAIT_FOR_BED_HEATER)
@@ -164,7 +164,7 @@ public:
 private:
   static bool probe_down_to_z(const float z, const feedRate_t fr_mm_s);
   static void do_z_raise(const float z_raise);
-  static float run_z_probe();
+  static float run_z_probe(const bool sanity_check=true);
 };
 
 extern Probe probe;