Fix Marlin splash screen logic (#13646)

Marlin/Configuration_adv.h

@@ -964,6 +964,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

Marlin/src/inc/Conditionals_LCD.h

@@ -556,3 +556,7 @@
     #endif
   #endif
 #endif
+
+#if ENABLED(SLIM_LCD_MENUS)
+  #define BOOT_MARLIN_LOGO_SMALL
+#endif

Marlin/src/lcd/dogm/dogm_Bootscreen.h

@@ -29,8 +29,6 @@
 
 #include "../../inc/MarlinConfig.h"
 
-//#define START_BMPHIGH // Costs 399 bytes more flash
-
 #if ENABLED(SHOW_CUSTOM_BOOTSCREEN)
 
   #include "../../../_Bootscreen.h"
@@ -44,7 +42,33 @@
 
 #endif
 
-#if ENABLED(START_BMPHIGH)
+#if ENABLED(BOOT_MARLIN_LOGO_SMALL)
+
+  #define START_BMPWIDTH      56
+
+  const unsigned char start_bmp[] PROGMEM = {
+    B00011111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
+    B01100000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111111,
+    B01000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,
+    B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111111,
+    B10000011,B11001111,B00000000,B00000000,B00001100,B00110000,B00111111,
+    B10000111,B11111111,B10000000,B00000000,B00001100,B00110000,B00011111,
+    B10000110,B01111001,B10000000,B00000000,B00001100,B00000000,B00001111,
+    B10001100,B00110000,B11000111,B10000011,B10001100,B00110000,B11100111,
+    B10001100,B00110000,B11001111,B11000111,B11001100,B00110001,B11110011,
+    B10001100,B00110000,B11011100,B11101100,B11101100,B00110011,B10111001,
+    B10001100,B00110000,B11011000,B01101100,B01101100,B00110011,B00011001,
+    B10001100,B00110000,B11010000,B01101100,B00001100,B00110011,B00011001,
+    B10001100,B00110000,B11011000,B01101100,B00001100,B00110011,B00011001,
+    B10001100,B00110000,B11011100,B01101100,B00001110,B00111011,B00011001,
+    B10001100,B00110000,B11001111,B01111100,B00000111,B10011111,B00011001,
+    B10001100,B00110000,B11000111,B01111100,B00000011,B10001111,B00011001,
+    B01000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000010,
+    B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,
+    B00011111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111000
+  };
+
+#else
 
   #define START_BMPWIDTH      112
 
@@ -89,32 +113,6 @@
     B00000001,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B10000000
   };
 
-#else
-
-  #define START_BMPWIDTH      56
-
-  const unsigned char start_bmp[] PROGMEM = {
-    B00011111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
-    B01100000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111111,
-    B01000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,
-    B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111111,
-    B10000011,B11001111,B00000000,B00000000,B00001100,B00110000,B00111111,
-    B10000111,B11111111,B10000000,B00000000,B00001100,B00110000,B00011111,
-    B10000110,B01111001,B10000000,B00000000,B00001100,B00000000,B00001111,
-    B10001100,B00110000,B11000111,B10000011,B10001100,B00110000,B11100111,
-    B10001100,B00110000,B11001111,B11000111,B11001100,B00110001,B11110011,
-    B10001100,B00110000,B11011100,B11101100,B11101100,B00110011,B10111001,
-    B10001100,B00110000,B11011000,B01101100,B01101100,B00110011,B00011001,
-    B10001100,B00110000,B11010000,B01101100,B00001100,B00110011,B00011001,
-    B10001100,B00110000,B11011000,B01101100,B00001100,B00110011,B00011001,
-    B10001100,B00110000,B11011100,B01101100,B00001110,B00111011,B00011001,
-    B10001100,B00110000,B11001111,B01111100,B00000111,B10011111,B00011001,
-    B10001100,B00110000,B11000111,B01111100,B00000011,B10001111,B00011001,
-    B01000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000010,
-    B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,
-    B00011111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111000
-  };
-
 #endif
 
 #ifndef START_BMP_BYTEWIDTH

Marlin/src/lcd/dogm/ultralcd_DOGM.cpp

@@ -154,29 +154,53 @@ void MarlinUI::set_font(const MarlinFont font_nr) {
       lcd_custom_bootscreen();
     #endif
 
-    constexpr uint8_t offy =
+    // Screen dimensions.
-      #if ENABLED(START_BMPHIGH)
+    //const uint8_t width = u8g.getWidth(), height = u8g.getHeight();
-        (LCD_PIXEL_HEIGHT - (START_BMPHEIGHT)) / 2
+    constexpr uint8_t width = LCD_PIXEL_WIDTH, height = LCD_PIXEL_HEIGHT;
+
+    // Determine text space needed
+    #ifndef STRING_SPLASH_LINE2
+      constexpr uint8_t text_total_height = MENU_FONT_HEIGHT,
+                        text_width_1 = (sizeof(STRING_SPLASH_LINE1) - 1) * (MENU_FONT_WIDTH),
+                        text_width_2 = 0;
     #else
-        MENU_FONT_HEIGHT
+      constexpr uint8_t text_total_height = (MENU_FONT_HEIGHT) * 2,
+                        text_width_1 = (sizeof(STRING_SPLASH_LINE1) - 1) * (MENU_FONT_WIDTH),
+                        text_width_2 = (sizeof(STRING_SPLASH_LINE2) - 1) * (MENU_FONT_WIDTH);
     #endif
-    ;
+    constexpr uint8_t text_max_width = MAX(text_width_1, text_width_2),
+                      rspace = width - (START_BMPWIDTH);
+
+    int8_t offx, offy, txt_base, txt_offx_1, txt_offx_2;
 
-    const uint8_t width = u8g.getWidth(), height = u8g.getHeight(),
+    // Can the text fit to the right of the bitmap?
-                  offx = (width - (START_BMPWIDTH)) / 2;
+    if (text_max_width < rspace) {
+      constexpr uint8_t inter = (width - text_max_width - (START_BMPWIDTH)) / 3; // Evenly distribute horizontal space
+      offx = inter;                             // First the boot logo...
+      offy = (height - (START_BMPHEIGHT)) / 2;  // ...V-aligned in the full height
+      txt_offx_1 = txt_offx_2 = inter + (START_BMPWIDTH) + inter; // Text right of the bitmap
+      txt_base = (height + MENU_FONT_ASCENT + text_total_height - (MENU_FONT_HEIGHT)) / 2; // Text vertical center
+    }
+    else {
+      constexpr uint8_t inter = (height - text_total_height - (START_BMPHEIGHT)) / 3; // Evenly distribute vertical space
+      offy = inter;                             // V-align boot logo proportionally
+      offx = rspace / 2;                        // Center the boot logo in the whole space
+      txt_offx_1 = (width - text_width_1) / 2;  // Text 1 centered
+      txt_offx_2 = (width - text_width_2) / 2;  // Text 2 centered
+      txt_base = offy + START_BMPHEIGHT + offy + text_total_height - (MENU_FONT_DESCENT);   // Even spacing looks best
+    }
+    NOLESS(offx, 0);
+    NOLESS(offy, 0);
 
     u8g.firstPage();
     do {
       u8g.drawBitmapP(offx, offy, (START_BMPWIDTH + 7) / 8, START_BMPHEIGHT, start_bmp);
       set_font(FONT_MENU);
       #ifndef STRING_SPLASH_LINE2
-        const uint8_t txt1X = width - (sizeof(STRING_SPLASH_LINE1) - 1) * (MENU_FONT_WIDTH);
+        u8g.drawStr(txt_offx_1, txt_base, STRING_SPLASH_LINE1);
-        u8g.drawStr(txt1X, (height + MENU_FONT_HEIGHT) / 2, STRING_SPLASH_LINE1);
       #else
-        const uint8_t txt1X = (width - (sizeof(STRING_SPLASH_LINE1) - 1) * (MENU_FONT_WIDTH)) / 2,
+        u8g.drawStr(txt_offx_1, txt_base - (MENU_FONT_HEIGHT), STRING_SPLASH_LINE1);
-                      txt2X = (width - (sizeof(STRING_SPLASH_LINE2) - 1) * (MENU_FONT_WIDTH)) / 2;
+        u8g.drawStr(txt_offx_2, txt_base, STRING_SPLASH_LINE2);
-        u8g.drawStr(txt1X, height - (MENU_FONT_HEIGHT) * 3 / 2, STRING_SPLASH_LINE1);
-        u8g.drawStr(txt2X, height - (MENU_FONT_HEIGHT) * 1 / 2, STRING_SPLASH_LINE2);
       #endif
     } while (u8g.nextPage());
     #ifndef BOOTSCREEN_TIMEOUT

config/default/Configuration_adv.h

@@ -966,6 +966,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/3DFabXYZ/Migbot/Configuration_adv.h

@@ -966,6 +966,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/AlephObjects/TAZ4/Configuration_adv.h

@@ -966,6 +966,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/AliExpress/UM2pExt/Configuration_adv.h

@@ -966,6 +966,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/Anet/A2/Configuration_adv.h

@@ -966,6 +966,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/Anet/A2plus/Configuration_adv.h

@@ -966,6 +966,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/Anet/A6/Configuration_adv.h

@@ -966,6 +966,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/Anet/A8/Configuration_adv.h

@@ -966,6 +966,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/AnyCubic/i3/Configuration_adv.h

@@ -966,6 +966,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/ArmEd/Configuration_adv.h

@@ -970,6 +970,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/BIBO/TouchX/cyclops/Configuration_adv.h

@@ -966,6 +966,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/BIBO/TouchX/default/Configuration_adv.h

@@ -966,6 +966,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/BQ/Hephestos/Configuration_adv.h

@@ -963,6 +963,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/BQ/Hephestos_2/Configuration_adv.h

@@ -971,6 +971,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/BQ/WITBOX/Configuration_adv.h

@@ -963,6 +963,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/Cartesio/Configuration_adv.h

@@ -966,6 +966,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/Creality/CR-10/Configuration_adv.h

@@ -966,6 +966,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/Creality/CR-10S/Configuration_adv.h

@@ -966,6 +966,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/Creality/CR-10_5S/Configuration_adv.h

@@ -966,6 +966,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/Creality/CR-10mini/Configuration_adv.h

@@ -966,6 +966,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/Creality/CR-8/Configuration_adv.h

@@ -966,6 +966,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/Creality/Ender-2/Configuration_adv.h

@@ -963,6 +963,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/Creality/Ender-3/Configuration_adv.h

@@ -963,6 +963,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/Creality/Ender-4/Configuration_adv.h

@@ -966,6 +966,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/Einstart-S/Configuration_adv.h

@@ -966,6 +966,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/Felix/Configuration_adv.h

@@ -966,6 +966,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/FlashForge/CreatorPro/Configuration_adv.h

@@ -962,6 +962,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/FolgerTech/i3-2020/Configuration_adv.h

@@ -966,6 +966,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/Formbot/Raptor/Configuration_adv.h

@@ -966,6 +966,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/Formbot/T_Rex_2+/Configuration_adv.h

@@ -970,6 +970,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/Formbot/T_Rex_3/Configuration_adv.h

@@ -970,6 +970,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/Geeetech/A10M/Configuration_adv.h

@@ -966,6 +966,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/Geeetech/A20M/Configuration_adv.h

@@ -966,6 +966,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/Geeetech/MeCreator2/Configuration_adv.h

@@ -966,6 +966,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h

@@ -966,6 +966,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h

@@ -966,6 +966,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/Infitary/i3-M508/Configuration_adv.h

@@ -966,6 +966,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/JGAurora/A5/Configuration_adv.h

@@ -963,6 +963,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/MakerParts/Configuration_adv.h

@@ -966,6 +966,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/Malyan/M150/Configuration_adv.h

@@ -966,6 +966,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/Malyan/M200/Configuration_adv.h

@@ -966,6 +966,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/Micromake/C1/enhanced/Configuration_adv.h

@@ -966,6 +966,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/Mks/Robin/Configuration_adv.h

@@ -966,6 +966,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/Mks/Sbase/Configuration_adv.h

@@ -967,6 +967,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/RapideLite/RL200/Configuration_adv.h

@@ -966,6 +966,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/RigidBot/Configuration_adv.h

@@ -966,6 +966,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/SCARA/Configuration_adv.h

@@ -963,6 +963,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h

@@ -963,6 +963,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/Sanguinololu/Configuration_adv.h

@@ -966,6 +966,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/TheBorg/Configuration_adv.h

@@ -966,6 +966,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/TinyBoy2/Configuration_adv.h

@@ -966,6 +966,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/Tronxy/X3A/Configuration_adv.h

@@ -966,6 +966,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/Tronxy/X5S-2E/Configuration_adv.h

@@ -966,6 +966,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/UltiMachine/Archim1/Configuration_adv.h

@@ -966,6 +966,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/UltiMachine/Archim2/Configuration_adv.h

@@ -966,6 +966,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/VORONDesign/Configuration_adv.h

@@ -966,6 +966,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/Velleman/K8200/Configuration_adv.h

@@ -979,6 +979,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/Velleman/K8400/Configuration_adv.h

@@ -966,6 +966,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/WASP/PowerWASP/Configuration_adv.h

@@ -966,6 +966,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/Wanhao/Duplicator 6/Configuration_adv.h

@@ -965,6 +965,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/delta/Anycubic/Kossel/Configuration_adv.h

@@ -965,6 +965,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h

@@ -965,6 +965,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/delta/FLSUN/kossel/Configuration_adv.h

@@ -965,6 +965,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h

@@ -965,6 +965,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h

@@ -965,6 +965,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/delta/MKS/SBASE/Configuration_adv.h

@@ -965,6 +965,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/delta/Tevo Little Monster/Configuration_adv.h

@@ -965,6 +965,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/delta/generic/Configuration_adv.h

@@ -965,6 +965,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/delta/kossel_mini/Configuration_adv.h

@@ -964,6 +964,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/delta/kossel_xl/Configuration_adv.h

@@ -965,6 +965,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/gCreate/gMax1.5+/Configuration_adv.h

@@ -966,6 +966,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/makibox/Configuration_adv.h

@@ -966,6 +966,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/tvrrug/Round2/Configuration_adv.h

@@ -966,6 +966,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT

config/examples/wt150/Configuration_adv.h

@@ -967,6 +967,7 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
 
   // Frivolous Game Options
   //#define MARLIN_BRICKOUT