🎨 Rename all/no axis enums

Marlin/src/core/types.h

@@ -54,7 +54,7 @@ enum AxisEnum : uint8_t {
   X_HEAD, Y_HEAD, Z_HEAD,
   E0_AXIS = E_AXIS,
   E1_AXIS, E2_AXIS, E3_AXIS, E4_AXIS, E5_AXIS, E6_AXIS, E7_AXIS,
-  ALL_AXES_MASK = 0xFE, NO_AXIS_MASK = 0xFF
+  ALL_AXES_ENUM = 0xFE, NO_AXIS_ENUM = 0xFF
 };
 
 //

Marlin/src/gcode/calibrate/M852.cpp

@@ -86,7 +86,7 @@ void GcodeSuite::M852() {
 
   // When skew is changed the current position changes
   if (setval) {
-    set_current_from_steppers_for_axis(ALL_AXES_MASK);
+    set_current_from_steppers_for_axis(ALL_AXES_ENUM);
     sync_plan_position();
     report_current_position();
   }

Marlin/src/gcode/probe/G38.cpp

@@ -38,7 +38,7 @@ inline void G38_single_probe(const uint8_t move_value) {
   planner.synchronize();
   G38_move = 0;
   endstops.hit_on_purpose();
-  set_current_from_steppers_for_axis(ALL_AXES_MASK);
+  set_current_from_steppers_for_axis(ALL_AXES_ENUM);
   sync_plan_position();
 }
 

Marlin/src/lcd/marlinui.cpp

@@ -684,7 +684,7 @@ void MarlinUI::quick_feedback(const bool clear_buttons/*=true*/) {
   #if ENABLED(MULTI_E_MANUAL)
     int8_t ManualMove::e_index = 0;
   #endif
-  AxisEnum ManualMove::axis = NO_AXIS_MASK;
+  AxisEnum ManualMove::axis = NO_AXIS_ENUM;
 
   /**
    * If a manual move has been posted and its time has arrived, and if the planner
@@ -695,7 +695,7 @@ void MarlinUI::quick_feedback(const bool clear_buttons/*=true*/) {
    *
    * To post a manual move:
    *   - Update current_position to the new place you want to go.
-   *   - Set manual_move.axis to an axis like X_AXIS. Use ALL_AXES_MASK for diagonal moves.
+   *   - Set manual_move.axis to an axis like X_AXIS. Use ALL_AXES_ENUM for diagonal moves.
    *   - Set manual_move.start_time to a point in the future (in ms) when the move should be done.
    *
    * For kinematic machines:
@@ -710,7 +710,7 @@ void MarlinUI::quick_feedback(const bool clear_buttons/*=true*/) {
     if (processing) return;   // Prevent re-entry from idle() calls
 
     // Add a manual move to the queue?
-    if (axis != NO_AXIS_MASK && ELAPSED(millis(), start_time) && !planner.is_full()) {
+    if (axis != NO_AXIS_ENUM && ELAPSED(millis(), start_time) && !planner.is_full()) {
 
       const feedRate_t fr_mm_s = (axis <= E_AXIS) ? manual_feedrate_mm_s[axis] : XY_PROBE_FEEDRATE_MM_S;
 
@@ -722,7 +722,7 @@ void MarlinUI::quick_feedback(const bool clear_buttons/*=true*/) {
         #endif
 
         // Apply a linear offset to a single axis
-        if (axis == ALL_AXES_MASK)
+        if (axis == ALL_AXES_ENUM)
           destination = all_axes_destination;
         else if (axis <= XYZE) {
           destination = current_position;
@@ -731,7 +731,7 @@ void MarlinUI::quick_feedback(const bool clear_buttons/*=true*/) {
 
         // Reset for the next move
         offset = 0;
-        axis = NO_AXIS_MASK;
+        axis = NO_AXIS_ENUM;
 
         // DELTA and SCARA machines use segmented moves, which could fill the planner during the call to
         // move_to_destination. This will cause idle() to be called, which can then call this function while the
@@ -748,7 +748,7 @@ void MarlinUI::quick_feedback(const bool clear_buttons/*=true*/) {
 
         //SERIAL_ECHOLNPAIR("Add planner.move with Axis ", AS_CHAR(axis_codes[axis]), " at FR ", fr_mm_s);
 
-        axis = NO_AXIS_MASK;
+        axis = NO_AXIS_ENUM;
 
       #endif
     }

Marlin/src/lcd/menu/menu_bed_leveling.cpp

@@ -206,7 +206,7 @@
 #if ENABLED(MESH_EDIT_MENU)
 
   inline void refresh_planner() {
-    set_current_from_steppers_for_axis(ALL_AXES_MASK);
+    set_current_from_steppers_for_axis(ALL_AXES_ENUM);
     sync_plan_position();
   }
 

Marlin/src/lcd/menu/menu_ubl.cpp

@@ -430,7 +430,7 @@ void ubl_map_move_to_xy() {
 
   // Use the built-in manual move handler to move to the mesh point.
   ui.manual_move.set_destination(xy);
-  ui.manual_move.soon(ALL_AXES_MASK);
+  ui.manual_move.soon(ALL_AXES_ENUM);
 }
 
 inline int32_t grid_index(const uint8_t x, const uint8_t y) {

Marlin/src/module/motion.cpp

@@ -282,7 +282,7 @@ void report_current_position_projected() {
 void quickstop_stepper() {
   planner.quick_stop();
   planner.synchronize();
-  set_current_from_steppers_for_axis(ALL_AXES_MASK);
+  set_current_from_steppers_for_axis(ALL_AXES_ENUM);
   sync_plan_position();
 }
 
@@ -360,7 +360,7 @@ void set_current_from_steppers_for_axis(const AxisEnum axis) {
     planner.unapply_modifiers(pos, true);
   #endif
 
-  if (axis == ALL_AXES_MASK)
+  if (axis == ALL_AXES_ENUM)
     current_position = pos;
   else
     current_position[axis] = pos[axis];