Patch spacing in #3140

Marlin/example_configurations/Felix/Configuration.h

@@ -405,10 +405,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
 #if ENABLED(MESH_BED_LEVELING)
   #define MESH_MIN_X 10
-    #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
+  #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
   #define MESH_MIN_Y 10
   #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
-#define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
+  #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 

Marlin/example_configurations/Felix/Configuration_DUAL.h

@@ -402,10 +402,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
 #if ENABLED(MESH_BED_LEVELING)
   #define MESH_MIN_X 10
-    #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
+  #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
   #define MESH_MIN_Y 10
   #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
-#define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
+  #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 

Marlin/example_configurations/Hephestos/Configuration.h

@@ -415,10 +415,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 
 #if ENABLED(MESH_BED_LEVELING)
   #define MESH_MIN_X 10
-    #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
+  #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
   #define MESH_MIN_Y 10
   #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
-#define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
+  #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 

Marlin/example_configurations/Hephestos_2/Configuration.h

@@ -418,10 +418,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
 #if ENABLED(MESH_BED_LEVELING)
   #define MESH_MIN_X 10
-    #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
+  #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
   #define MESH_MIN_Y 10
   #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
-#define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
+  #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 

Marlin/example_configurations/K8200/Configuration.h

@@ -438,10 +438,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
 #if ENABLED(MESH_BED_LEVELING)
   #define MESH_MIN_X 10
-    #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
+  #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
   #define MESH_MIN_Y 10
   #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
-#define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
+  #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 

Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h

@@ -423,10 +423,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
 #if ENABLED(MESH_BED_LEVELING)
   #define MESH_MIN_X 10
-    #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
+  #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
   #define MESH_MIN_Y 10
   #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
-#define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
+  #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 

Marlin/example_configurations/RigidBot/Configuration.h

@@ -417,10 +417,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
 #if ENABLED(MESH_BED_LEVELING)
   #define MESH_MIN_X 10
-    #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
+  #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
   #define MESH_MIN_Y 10
   #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
-#define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
+  #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 

Marlin/example_configurations/SCARA/Configuration.h

@@ -431,10 +431,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
 #if ENABLED(MESH_BED_LEVELING)
   #define MESH_MIN_X 10
-    #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
+  #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
   #define MESH_MIN_Y 10
   #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
-#define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
+  #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 

Marlin/example_configurations/TAZ4/Configuration.h

@@ -443,10 +443,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
 #if ENABLED(MESH_BED_LEVELING)
   #define MESH_MIN_X 10
-    #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
+  #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
   #define MESH_MIN_Y 10
   #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
-#define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
+  #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 

Marlin/example_configurations/WITBOX/Configuration.h

@@ -415,10 +415,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 
 #if ENABLED(MESH_BED_LEVELING)
   #define MESH_MIN_X 10
-    #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
+  #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
   #define MESH_MIN_Y 10
   #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
-#define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
+  #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 

Marlin/example_configurations/delta/kossel_pro/Configuration.h

@@ -445,10 +445,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
 #if ENABLED(MESH_BED_LEVELING)
   #define MESH_MIN_X 10
-    #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
+  #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
   #define MESH_MIN_Y 10
   #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
-#define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
+  #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 

Marlin/example_configurations/delta/kossel_xl/Configuration.h

@@ -451,10 +451,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
 #if ENABLED(MESH_BED_LEVELING)
   #define MESH_MIN_X 10
-    #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
+  #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
   #define MESH_MIN_Y 10
   #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
-#define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
+  #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 

Marlin/example_configurations/makibox/Configuration.h

@@ -426,10 +426,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
 #if ENABLED(MESH_BED_LEVELING)
   #define MESH_MIN_X 10
-    #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
+  #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
   #define MESH_MIN_Y 10
   #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
-#define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
+  #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 

Marlin/example_configurations/tvrrug/Round2/Configuration.h

@@ -413,10 +413,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 
 #if ENABLED(MESH_BED_LEVELING)
   #define MESH_MIN_X 10
-    #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
+  #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
   #define MESH_MIN_Y 10
   #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
-#define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
+  #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.