Scott Lahteine
7 years ago
committed by
GitHub
GitHub
33 changed files with 577 additions and 585 deletions
@ -1,171 +1,162 @@ |
|||||
/**
|
/**
|
||||
* Marlin 3D Printer Firmware |
* Marlin 3D Printer Firmware |
||||
* Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* |
* |
||||
* Based on Sprinter and grbl. |
* Based on Sprinter and grbl. |
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm |
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm |
||||
* |
* |
||||
* This program is free software: you can redistribute it and/or modify |
* This program is free software: you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License as published by |
* it under the terms of the GNU General Public License as published by |
||||
* the Free Software Foundation, either version 3 of the License, or |
* the Free Software Foundation, either version 3 of the License, or |
||||
* (at your option) any later version. |
* (at your option) any later version. |
||||
* |
* |
||||
* This program is distributed in the hope that it will be useful, |
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
* GNU General Public License for more details. |
||||
* |
* |
||||
* You should have received a copy of the GNU General Public License |
* You should have received a copy of the GNU General Public License |
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
* |
* |
||||
*/ |
*/ |
||||
|
|
||||
// adapted from I2C/master/master.c example
|
// adapted from I2C/master/master.c example
|
||||
// https://www-users.cs.york.ac.uk/~pcc/MCP/HAPR-Course-web/CMSIS/examples/html/master_8c_source.html
|
// https://www-users.cs.york.ac.uk/~pcc/MCP/HAPR-Course-web/CMSIS/examples/html/master_8c_source.html
|
||||
|
|
||||
|
|
||||
|
|
||||
#ifdef TARGET_LPC1768 |
#ifdef TARGET_LPC1768 |
||||
|
|
||||
#ifdef __cplusplus |
#ifdef __cplusplus |
||||
extern "C" { |
extern "C" { |
||||
#endif |
#endif |
||||
|
|
||||
|
#include <lpc17xx_i2c.h> |
||||
|
#include <lpc17xx_pinsel.h> |
||||
|
#include <lpc17xx_libcfg_default.h> |
||||
|
|
||||
#include <lpc17xx_i2c.h> |
//////////////////////////////////////////////////////////////////////////////////////
|
||||
#include <lpc17xx_pinsel.h> |
|
||||
#include <lpc17xx_libcfg_default.h> |
|
||||
|
|
||||
//////////////////////////////////////////////////////////////////////////////////////
|
// These two routines are exact copies of the lpc17xx_i2c.c routines. Couldn't link to
|
||||
|
// to the lpc17xx_i2c.c routines so had to copy them into this file & rename them.
|
||||
|
|
||||
// These two routines are exact copies of the lpc17xx_i2c.c routines. Couldn't link to
|
static uint32_t _I2C_Start (LPC_I2C_TypeDef *I2Cx) { |
||||
// to the lpc17xx_i2c.c routines so had to copy them into this file & rename them.
|
// Reset STA, STO, SI
|
||||
|
I2Cx->I2CONCLR = I2C_I2CONCLR_SIC|I2C_I2CONCLR_STOC|I2C_I2CONCLR_STAC; |
||||
|
|
||||
static uint32_t _I2C_Start (LPC_I2C_TypeDef *I2Cx) |
// Enter to Master Transmitter mode
|
||||
{ |
I2Cx->I2CONSET = I2C_I2CONSET_STA; |
||||
// Reset STA, STO, SI
|
|
||||
I2Cx->I2CONCLR = I2C_I2CONCLR_SIC|I2C_I2CONCLR_STOC|I2C_I2CONCLR_STAC; |
|
||||
|
|
||||
// Enter to Master Transmitter mode
|
// Wait for complete
|
||||
I2Cx->I2CONSET = I2C_I2CONSET_STA; |
while (!(I2Cx->I2CONSET & I2C_I2CONSET_SI)); |
||||
|
I2Cx->I2CONCLR = I2C_I2CONCLR_STAC; |
||||
|
return (I2Cx->I2STAT & I2C_STAT_CODE_BITMASK); |
||||
|
} |
||||
|
|
||||
// Wait for complete
|
static void _I2C_Stop (LPC_I2C_TypeDef *I2Cx) { |
||||
while (!(I2Cx->I2CONSET & I2C_I2CONSET_SI)); |
/* Make sure start bit is not active */ |
||||
|
if (I2Cx->I2CONSET & I2C_I2CONSET_STA) |
||||
I2Cx->I2CONCLR = I2C_I2CONCLR_STAC; |
I2Cx->I2CONCLR = I2C_I2CONCLR_STAC; |
||||
return (I2Cx->I2STAT & I2C_STAT_CODE_BITMASK); |
|
||||
} |
|
||||
|
|
||||
static void _I2C_Stop (LPC_I2C_TypeDef *I2Cx) |
I2Cx->I2CONSET = I2C_I2CONSET_STO|I2C_I2CONSET_AA; |
||||
{ |
I2Cx->I2CONCLR = I2C_I2CONCLR_SIC; |
||||
|
} |
||||
|
|
||||
/* Make sure start bit is not active */ |
|
||||
if (I2Cx->I2CONSET & I2C_I2CONSET_STA) |
|
||||
{ |
|
||||
I2Cx->I2CONCLR = I2C_I2CONCLR_STAC; |
|
||||
} |
|
||||
|
|
||||
I2Cx->I2CONSET = I2C_I2CONSET_STO|I2C_I2CONSET_AA; |
//////////////////////////////////////////////////////////////////////////////////////
|
||||
|
|
||||
I2Cx->I2CONCLR = I2C_I2CONCLR_SIC; |
|
||||
} |
|
||||
|
|
||||
|
#define USEDI2CDEV_M 1 // use I2C1 controller
|
||||
|
|
||||
//////////////////////////////////////////////////////////////////////////////////////
|
#if (USEDI2CDEV_M == 0) |
||||
|
#define I2CDEV_M LPC_I2C0 |
||||
|
#elif (USEDI2CDEV_M == 1) |
||||
|
#define I2CDEV_M LPC_I2C1 |
||||
|
#elif (USEDI2CDEV_M == 2) |
||||
|
#define I2CDEV_M LPC_I2C2 |
||||
|
#else |
||||
|
#error "Master I2C device not defined!" |
||||
|
#endif |
||||
|
|
||||
|
|
||||
#define USEDI2CDEV_M 1 // use I2C1 controller
|
PINSEL_CFG_Type PinCfg; |
||||
|
I2C_M_SETUP_Type transferMCfg; |
||||
|
|
||||
#if (USEDI2CDEV_M == 0) |
#define I2C_status (LPC_I2C1->I2STAT & I2C_STAT_CODE_BITMASK) |
||||
#define I2CDEV_M LPC_I2C0 |
|
||||
#elif (USEDI2CDEV_M == 1) |
|
||||
#define I2CDEV_M LPC_I2C1 |
|
||||
#elif (USEDI2CDEV_M == 2) |
|
||||
#define I2CDEV_M LPC_I2C2 |
|
||||
#else |
|
||||
#error "Master I2C device not defined!" |
|
||||
#endif |
|
||||
|
|
||||
|
|
||||
PINSEL_CFG_Type PinCfg; |
uint8_t digipot_mcp4451_start(uint8_t sla) { // send slave address and write bit
|
||||
I2C_M_SETUP_Type transferMCfg; |
// Sometimes TX data ACK or NAK status is returned. That mean the start state didn't
|
||||
|
// happen which means only the value of the slave address was send. Keep looping until
|
||||
#define I2C_status (LPC_I2C1->I2STAT & I2C_STAT_CODE_BITMASK) |
// the slave address and write bit are actually sent.
|
||||
|
do{ |
||||
|
_I2C_Stop(I2CDEV_M); // output stop state on I2C bus
|
||||
uint8_t digipot_mcp4451_start(uint8_t sla) { // send slave address and write bit
|
_I2C_Start(I2CDEV_M); // output start state on I2C bus
|
||||
// Sometimes TX data ACK or NAK status is returned. That mean the start state didn't
|
while ((I2C_status != I2C_I2STAT_M_TX_START) |
||||
// happen which means only the value of the slave address was send. Keep looping until
|
&& (I2C_status != I2C_I2STAT_M_TX_RESTART) |
||||
// the slave address and write bit are actually sent.
|
&& (I2C_status != I2C_I2STAT_M_TX_DAT_ACK) |
||||
do{ |
&& (I2C_status != I2C_I2STAT_M_TX_DAT_NACK)); //wait for start to be asserted
|
||||
_I2C_Stop(I2CDEV_M); // output stop state on I2C bus
|
|
||||
_I2C_Start(I2CDEV_M); // output start state on I2C bus
|
|
||||
while ((I2C_status != I2C_I2STAT_M_TX_START) |
|
||||
&& (I2C_status != I2C_I2STAT_M_TX_RESTART) |
|
||||
&& (I2C_status != I2C_I2STAT_M_TX_DAT_ACK) |
|
||||
&& (I2C_status != I2C_I2STAT_M_TX_DAT_NACK)); //wait for start to be asserted
|
|
||||
|
|
||||
LPC_I2C1->I2CONCLR = I2C_I2CONCLR_STAC; // clear start state before tansmitting slave address
|
|
||||
LPC_I2C1->I2DAT = (sla <<1) & I2C_I2DAT_BITMASK; // transmit slave address & write bit
|
|
||||
LPC_I2C1->I2CONSET = I2C_I2CONSET_AA; |
|
||||
LPC_I2C1->I2CONCLR = I2C_I2CONCLR_SIC; |
|
||||
while ((I2C_status != I2C_I2STAT_M_TX_SLAW_ACK) |
|
||||
&& (I2C_status != I2C_I2STAT_M_TX_SLAW_NACK) |
|
||||
&& (I2C_status != I2C_I2STAT_M_TX_DAT_ACK) |
|
||||
&& (I2C_status != I2C_I2STAT_M_TX_DAT_NACK)); //wait for slaw to finish
|
|
||||
}while ( (I2C_status == I2C_I2STAT_M_TX_DAT_ACK) || (I2C_status == I2C_I2STAT_M_TX_DAT_NACK)); |
|
||||
return 1; |
|
||||
} |
|
||||
|
|
||||
|
LPC_I2C1->I2CONCLR = I2C_I2CONCLR_STAC; // clear start state before tansmitting slave address
|
||||
|
LPC_I2C1->I2DAT = (sla <<1) & I2C_I2DAT_BITMASK; // transmit slave address & write bit
|
||||
|
LPC_I2C1->I2CONSET = I2C_I2CONSET_AA; |
||||
|
LPC_I2C1->I2CONCLR = I2C_I2CONCLR_SIC; |
||||
|
while ((I2C_status != I2C_I2STAT_M_TX_SLAW_ACK) |
||||
|
&& (I2C_status != I2C_I2STAT_M_TX_SLAW_NACK) |
||||
|
&& (I2C_status != I2C_I2STAT_M_TX_DAT_ACK) |
||||
|
&& (I2C_status != I2C_I2STAT_M_TX_DAT_NACK)); //wait for slaw to finish
|
||||
|
}while ( (I2C_status == I2C_I2STAT_M_TX_DAT_ACK) || (I2C_status == I2C_I2STAT_M_TX_DAT_NACK)); |
||||
|
return 1; |
||||
|
} |
||||
|
|
||||
|
|
||||
|
void digipot_mcp4451_init(void) { |
||||
|
|
||||
|
/**
|
||||
|
* Init I2C pin connect |
||||
|
*/ |
||||
|
PinCfg.OpenDrain = 0; |
||||
|
PinCfg.Pinmode = 0; |
||||
|
#if ((USEDI2CDEV_M == 0)) |
||||
|
PinCfg.Funcnum = 1; |
||||
|
PinCfg.Pinnum = 27; |
||||
|
PinCfg.Portnum = 0; |
||||
|
PINSEL_ConfigPin(&PinCfg); // SDA0 / D57 AUX-1
|
||||
|
PinCfg.Pinnum = 28; |
||||
|
PINSEL_ConfigPin(&PinCfg); // SCL0 / D58 AUX-1
|
||||
|
#endif |
||||
|
#if ((USEDI2CDEV_M == 1)) |
||||
|
PinCfg.Funcnum = 3; |
||||
|
PinCfg.Pinnum = 0; |
||||
|
PinCfg.Portnum = 0; |
||||
|
PINSEL_ConfigPin(&PinCfg); // SDA1 / D20 SCA
|
||||
|
PinCfg.Pinnum = 1; |
||||
|
PINSEL_ConfigPin(&PinCfg); // SCL1 / D21 SCL
|
||||
|
#endif |
||||
|
#if ((USEDI2CDEV_M == 2)) |
||||
|
PinCfg.Funcnum = 2; |
||||
|
PinCfg.Pinnum = 10; |
||||
|
PinCfg.Portnum = 0; |
||||
|
PINSEL_ConfigPin(&PinCfg); // SDA2 / D38 X_ENABLE_PIN
|
||||
|
PinCfg.Pinnum = 11; |
||||
|
PINSEL_ConfigPin(&PinCfg); // SCL2 / D55 X_DIR_PIN
|
||||
|
#endif |
||||
|
// Initialize I2C peripheral
|
||||
|
I2C_Init(I2CDEV_M, 400000); // hardwired to 400KHz bit rate, 100KHz is the other option
|
||||
|
|
||||
void digipot_mcp4451_init(void) { |
/* Enable Master I2C operation */ |
||||
|
I2C_Cmd(I2CDEV_M, I2C_MASTER_MODE, ENABLE); |
||||
/*
|
} |
||||
* Init I2C pin connect |
|
||||
*/ |
|
||||
PinCfg.OpenDrain = 0; |
|
||||
PinCfg.Pinmode = 0; |
|
||||
#if ((USEDI2CDEV_M == 0)) |
|
||||
PinCfg.Funcnum = 1; |
|
||||
PinCfg.Pinnum = 27; |
|
||||
PinCfg.Portnum = 0; |
|
||||
PINSEL_ConfigPin(&PinCfg); // SDA0 / D57 AUX-1
|
|
||||
PinCfg.Pinnum = 28; |
|
||||
PINSEL_ConfigPin(&PinCfg); // SCL0 / D58 AUX-1
|
|
||||
#endif |
|
||||
#if ((USEDI2CDEV_M == 1)) |
|
||||
PinCfg.Funcnum = 3; |
|
||||
PinCfg.Pinnum = 0; |
|
||||
PinCfg.Portnum = 0; |
|
||||
PINSEL_ConfigPin(&PinCfg); // SDA1 / D20 SCA
|
|
||||
PinCfg.Pinnum = 1; |
|
||||
PINSEL_ConfigPin(&PinCfg); // SCL1 / D21 SCL
|
|
||||
#endif |
|
||||
#if ((USEDI2CDEV_M == 2)) |
|
||||
PinCfg.Funcnum = 2; |
|
||||
PinCfg.Pinnum = 10; |
|
||||
PinCfg.Portnum = 0; |
|
||||
PINSEL_ConfigPin(&PinCfg); // SDA2 / D38 X_ENABLE_PIN
|
|
||||
PinCfg.Pinnum = 11; |
|
||||
PINSEL_ConfigPin(&PinCfg); // SCL2 / D55 X_DIR_PIN
|
|
||||
#endif |
|
||||
// Initialize I2C peripheral
|
|
||||
I2C_Init(I2CDEV_M, 400000); // hardwired to 400KHz bit rate, 100KHz is the other option
|
|
||||
|
|
||||
/* Enable Master I2C operation */ |
|
||||
I2C_Cmd(I2CDEV_M, I2C_MASTER_MODE, ENABLE); |
|
||||
} |
|
||||
|
|
||||
|
|
||||
uint8_t digipot_mcp4451_send_byte(uint8_t data) { |
uint8_t digipot_mcp4451_send_byte(uint8_t data) { |
||||
|
LPC_I2C1->I2DAT = data & I2C_I2DAT_BITMASK; // transmit data
|
||||
|
LPC_I2C1->I2CONSET = I2C_I2CONSET_AA; |
||||
|
LPC_I2C1->I2CONCLR = I2C_I2CONCLR_SIC; |
||||
|
while ((I2C_status != I2C_I2STAT_M_TX_DAT_ACK) && (I2C_status != I2C_I2STAT_M_TX_DAT_NACK)); // wait for xmit to finish
|
||||
|
return 1; |
||||
|
} |
||||
|
|
||||
LPC_I2C1->I2DAT = data & I2C_I2DAT_BITMASK; // transmit data
|
#ifdef __cplusplus |
||||
LPC_I2C1->I2CONSET = I2C_I2CONSET_AA; |
|
||||
LPC_I2C1->I2CONCLR = I2C_I2CONCLR_SIC; |
|
||||
while ((I2C_status != I2C_I2STAT_M_TX_DAT_ACK) && (I2C_status != I2C_I2STAT_M_TX_DAT_NACK)); // wait for xmit to finish
|
|
||||
return 1; |
|
||||
} |
} |
||||
|
|
||||
|
|
||||
#ifdef __cplusplus |
|
||||
} |
|
||||
#endif |
|
||||
#endif |
#endif |
||||
|
|
||||
|
#endif // TARGET_LPC1768
|
||||
|
|||||
Loading…
Reference in new issue