Merge pull request #3759 from thinkyhead/rc_more_printcounter

Printcounter bugfix and some new features

Marlin/Configuration.h

@@ -755,6 +755,19 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define ABS_PREHEAT_HPB_TEMP 110
 #define ABS_PREHEAT_FAN_SPEED 0   // Insert Value between 0 and 255
 
+//
+// Print job timer
+//
+// Enable this option to automatically start and stop the
+// print job timer when M104 and M109 commands are received.
+//
+// In all cases the timer can be started and stopped using
+// the following commands:
+//
+// - M75  - Start the print job timer
+// - M76  - Pause the print job timer
+// - M77  - Stop the print job timer
+#define PRINTJOB_TIMER_AUTOSTART
 
 //
 // Print Counter

Marlin/Marlin_main.cpp

@@ -4248,30 +4248,27 @@ inline void gcode_M42() {
 /**
  * M75: Start print timer
  */
-inline void gcode_M75() {
-  print_job_timer.start();
-}
+inline void gcode_M75() { print_job_timer.start(); }
 
 /**
  * M76: Pause print timer
  */
-inline void gcode_M76() {
-  print_job_timer.pause();
-}
+inline void gcode_M76() { print_job_timer.pause(); }
 
 /**
  * M77: Stop print timer
  */
-inline void gcode_M77() {
-  print_job_timer.stop();
-}
+inline void gcode_M77() { print_job_timer.stop(); }
 
 #if ENABLED(PRINTCOUNTER)
   /*+
    * M78: Show print statistics
    */
   inline void gcode_M78() {
-    print_job_timer.showStats();
+    // "M78 S78" will reset the statistics
+    if (code_seen('S') && code_value_short() == 78)
+      print_job_timer.initStats();
+    else print_job_timer.showStats();
   }
 #endif
 
@@ -4290,6 +4287,7 @@ inline void gcode_M104() {
         thermalManager.setTargetHotend(temp == 0.0 ? 0.0 : temp + duplicate_extruder_temp_offset, 1);
     #endif
 
+    #if ENABLED(PRINTJOB_TIMER_AUTOSTART)
       /**
        * We use half EXTRUDE_MINTEMP here to allow nozzles to be put into hot
        * stand by mode, for instance in a dual extruder setup, without affecting
@@ -4305,6 +4303,7 @@ inline void gcode_M104() {
        * will not restart.
        */
       else print_job_timer.start();
+    #endif
 
     if (temp > thermalManager.degHotend(target_extruder)) LCD_MESSAGEPGM(MSG_HEATING);
   }
@@ -4443,6 +4442,7 @@ inline void gcode_M109() {
         thermalManager.setTargetHotend(temp == 0.0 ? 0.0 : temp + duplicate_extruder_temp_offset, 1);
     #endif
 
+    #if ENABLED(PRINTJOB_TIMER_AUTOSTART)
       /**
        * We use half EXTRUDE_MINTEMP here to allow nozzles to be put into hot
        * stand by mode, for instance in a dual extruder setup, without affecting
@@ -4458,6 +4458,7 @@ inline void gcode_M109() {
        * will not restart.
        */
       else print_job_timer.start();
+    #endif
 
     if (temp > thermalManager.degHotend(target_extruder)) LCD_MESSAGEPGM(MSG_HEATING);
   }

Marlin/example_configurations/Felix/Configuration.h

@@ -738,6 +738,19 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define ABS_PREHEAT_HPB_TEMP 100
 #define ABS_PREHEAT_FAN_SPEED 255   // Insert Value between 0 and 255
 
+//
+// Print job timer
+//
+// Enable this option to automatically start and stop the
+// print job timer when M104 and M109 commands are received.
+//
+// In all cases the timer can be started and stopped using
+// the following commands:
+//
+// - M75  - Start the print job timer
+// - M76  - Pause the print job timer
+// - M77  - Stop the print job timer
+#define PRINTJOB_TIMER_AUTOSTART
 
 //
 // Print Counter

Marlin/example_configurations/Hephestos/Configuration.h

@@ -747,6 +747,19 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 #define ABS_PREHEAT_HPB_TEMP 100
 #define ABS_PREHEAT_FAN_SPEED 255   // Insert Value between 0 and 255
 
+//
+// Print job timer
+//
+// Enable this option to automatically start and stop the
+// print job timer when M104 and M109 commands are received.
+//
+// In all cases the timer can be started and stopped using
+// the following commands:
+//
+// - M75  - Start the print job timer
+// - M76  - Pause the print job timer
+// - M77  - Stop the print job timer
+#define PRINTJOB_TIMER_AUTOSTART
 
 //
 // Print Counter

Marlin/example_configurations/Hephestos_2/Configuration.h

@@ -749,6 +749,19 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define ABS_PREHEAT_HPB_TEMP    110
 #define ABS_PREHEAT_FAN_SPEED   0   // Insert Value between 0 and 255
 
+//
+// Print job timer
+//
+// Enable this option to automatically start and stop the
+// print job timer when M104 and M109 commands are received.
+//
+// In all cases the timer can be started and stopped using
+// the following commands:
+//
+// - M75  - Start the print job timer
+// - M76  - Pause the print job timer
+// - M77  - Stop the print job timer
+#define PRINTJOB_TIMER_AUTOSTART
 
 //
 // Print Counter

Marlin/example_configurations/K8200/Configuration.h

@@ -772,6 +772,19 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define ABS_PREHEAT_HPB_TEMP 60 // K8200: set back to 110 if you have an upgraded heatbed power supply
 #define ABS_PREHEAT_FAN_SPEED 0   // Insert Value between 0 and 255
 
+//
+// Print job timer
+//
+// Enable this option to automatically start and stop the
+// print job timer when M104 and M109 commands are received.
+//
+// In all cases the timer can be started and stopped using
+// the following commands:
+//
+// - M75  - Start the print job timer
+// - M76  - Pause the print job timer
+// - M77  - Stop the print job timer
+#define PRINTJOB_TIMER_AUTOSTART
 
 //
 // Print Counter

Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h

@@ -755,6 +755,19 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define ABS_PREHEAT_HPB_TEMP 110
 #define ABS_PREHEAT_FAN_SPEED 0   // Insert Value between 0 and 255
 
+//
+// Print job timer
+//
+// Enable this option to automatically start and stop the
+// print job timer when M104 and M109 commands are received.
+//
+// In all cases the timer can be started and stopped using
+// the following commands:
+//
+// - M75  - Start the print job timer
+// - M76  - Pause the print job timer
+// - M77  - Stop the print job timer
+#define PRINTJOB_TIMER_AUTOSTART
 
 //
 // Print Counter

Marlin/example_configurations/RigidBot/Configuration.h

@@ -750,6 +750,19 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define ABS_PREHEAT_HPB_TEMP 110
 #define ABS_PREHEAT_FAN_SPEED 255   // Insert Value between 0 and 255
 
+//
+// Print job timer
+//
+// Enable this option to automatically start and stop the
+// print job timer when M104 and M109 commands are received.
+//
+// In all cases the timer can be started and stopped using
+// the following commands:
+//
+// - M75  - Start the print job timer
+// - M76  - Pause the print job timer
+// - M77  - Stop the print job timer
+#define PRINTJOB_TIMER_AUTOSTART
 
 //
 // Print Counter

Marlin/example_configurations/SCARA/Configuration.h

@@ -763,6 +763,19 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define ABS_PREHEAT_HPB_TEMP 100
 #define ABS_PREHEAT_FAN_SPEED 255   // Insert Value between 0 and 255
 
+//
+// Print job timer
+//
+// Enable this option to automatically start and stop the
+// print job timer when M104 and M109 commands are received.
+//
+// In all cases the timer can be started and stopped using
+// the following commands:
+//
+// - M75  - Start the print job timer
+// - M76  - Pause the print job timer
+// - M77  - Stop the print job timer
+#define PRINTJOB_TIMER_AUTOSTART
 
 //
 // Print Counter

Marlin/example_configurations/TAZ4/Configuration.h

@@ -776,6 +776,19 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define ABS_PREHEAT_HPB_TEMP 110
 #define ABS_PREHEAT_FAN_SPEED 0   // Insert Value between 0 and 255
 
+//
+// Print job timer
+//
+// Enable this option to automatically start and stop the
+// print job timer when M104 and M109 commands are received.
+//
+// In all cases the timer can be started and stopped using
+// the following commands:
+//
+// - M75  - Start the print job timer
+// - M76  - Pause the print job timer
+// - M77  - Stop the print job timer
+#define PRINTJOB_TIMER_AUTOSTART
 
 //
 // Print Counter

Marlin/example_configurations/WITBOX/Configuration.h

@@ -747,6 +747,19 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 #define ABS_PREHEAT_HPB_TEMP 100
 #define ABS_PREHEAT_FAN_SPEED 255   // Insert Value between 0 and 255
 
+//
+// Print job timer
+//
+// Enable this option to automatically start and stop the
+// print job timer when M104 and M109 commands are received.
+//
+// In all cases the timer can be started and stopped using
+// the following commands:
+//
+// - M75  - Start the print job timer
+// - M76  - Pause the print job timer
+// - M77  - Stop the print job timer
+#define PRINTJOB_TIMER_AUTOSTART
 
 //
 // Print Counter

Marlin/example_configurations/adafruit/ST7565/Configuration.h

@@ -755,6 +755,19 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define ABS_PREHEAT_HPB_TEMP 110
 #define ABS_PREHEAT_FAN_SPEED 0   // Insert Value between 0 and 255
 
+//
+// Print job timer
+//
+// Enable this option to automatically start and stop the
+// print job timer when M104 and M109 commands are received.
+//
+// In all cases the timer can be started and stopped using
+// the following commands:
+//
+// - M75  - Start the print job timer
+// - M76  - Pause the print job timer
+// - M77  - Stop the print job timer
+#define PRINTJOB_TIMER_AUTOSTART
 
 //
 // Print Counter

Marlin/example_configurations/delta/biv2.5/Configuration.h

@@ -884,6 +884,19 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 #define ABS_PREHEAT_HPB_TEMP 100
 #define ABS_PREHEAT_FAN_SPEED 255   // Insert Value between 0 and 255
 
+//
+// Print job timer
+//
+// Enable this option to automatically start and stop the
+// print job timer when M104 and M109 commands are received.
+//
+// In all cases the timer can be started and stopped using
+// the following commands:
+//
+// - M75  - Start the print job timer
+// - M76  - Pause the print job timer
+// - M77  - Stop the print job timer
+#define PRINTJOB_TIMER_AUTOSTART
 
 //
 // Print Counter

Marlin/example_configurations/delta/generic/Configuration.h

@@ -884,6 +884,19 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 #define ABS_PREHEAT_HPB_TEMP 100
 #define ABS_PREHEAT_FAN_SPEED 255   // Insert Value between 0 and 255
 
+//
+// Print job timer
+//
+// Enable this option to automatically start and stop the
+// print job timer when M104 and M109 commands are received.
+//
+// In all cases the timer can be started and stopped using
+// the following commands:
+//
+// - M75  - Start the print job timer
+// - M76  - Pause the print job timer
+// - M77  - Stop the print job timer
+#define PRINTJOB_TIMER_AUTOSTART
 
 //
 // Print Counter

Marlin/example_configurations/delta/kossel_mini/Configuration.h

@@ -888,6 +888,19 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define ABS_PREHEAT_HPB_TEMP 100
 #define ABS_PREHEAT_FAN_SPEED 255   // Insert Value between 0 and 255
 
+//
+// Print job timer
+//
+// Enable this option to automatically start and stop the
+// print job timer when M104 and M109 commands are received.
+//
+// In all cases the timer can be started and stopped using
+// the following commands:
+//
+// - M75  - Start the print job timer
+// - M76  - Pause the print job timer
+// - M77  - Stop the print job timer
+#define PRINTJOB_TIMER_AUTOSTART
 
 //
 // Print Counter

Marlin/example_configurations/delta/kossel_pro/Configuration.h

@@ -881,6 +881,19 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define ABS_PREHEAT_HPB_TEMP 100
 #define ABS_PREHEAT_FAN_SPEED 255   // Insert Value between 0 and 255
 
+//
+// Print job timer
+//
+// Enable this option to automatically start and stop the
+// print job timer when M104 and M109 commands are received.
+//
+// In all cases the timer can be started and stopped using
+// the following commands:
+//
+// - M75  - Start the print job timer
+// - M76  - Pause the print job timer
+// - M77  - Stop the print job timer
+#define PRINTJOB_TIMER_AUTOSTART
 
 //
 // Print Counter

Marlin/example_configurations/delta/kossel_xl/Configuration.h

@@ -889,6 +889,19 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define ABS_PREHEAT_HPB_TEMP 100
 #define ABS_PREHEAT_FAN_SPEED 255   // Insert Value between 0 and 255
 
+//
+// Print job timer
+//
+// Enable this option to automatically start and stop the
+// print job timer when M104 and M109 commands are received.
+//
+// In all cases the timer can be started and stopped using
+// the following commands:
+//
+// - M75  - Start the print job timer
+// - M76  - Pause the print job timer
+// - M77  - Stop the print job timer
+#define PRINTJOB_TIMER_AUTOSTART
 
 //
 // Print Counter

Marlin/example_configurations/makibox/Configuration.h

@@ -758,6 +758,19 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define ABS_PREHEAT_HPB_TEMP 100
 #define ABS_PREHEAT_FAN_SPEED 255   // Insert Value between 0 and 255
 
+//
+// Print job timer
+//
+// Enable this option to automatically start and stop the
+// print job timer when M104 and M109 commands are received.
+//
+// In all cases the timer can be started and stopped using
+// the following commands:
+//
+// - M75  - Start the print job timer
+// - M76  - Pause the print job timer
+// - M77  - Stop the print job timer
+#define PRINTJOB_TIMER_AUTOSTART
 
 //
 // Print Counter

Marlin/example_configurations/tvrrug/Round2/Configuration.h

@@ -749,6 +749,19 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 #define ABS_PREHEAT_HPB_TEMP 100
 #define ABS_PREHEAT_FAN_SPEED 255   // Insert Value between 0 and 255
 
+//
+// Print job timer
+//
+// Enable this option to automatically start and stop the
+// print job timer when M104 and M109 commands are received.
+//
+// In all cases the timer can be started and stopped using
+// the following commands:
+//
+// - M75  - Start the print job timer
+// - M76  - Pause the print job timer
+// - M77  - Stop the print job timer
+#define PRINTJOB_TIMER_AUTOSTART
 
 //
 // Print Counter

Marlin/printcounter.cpp

@@ -149,7 +149,9 @@ void PrintCounter::stop() {
     PrintCounter::debug(PSTR("stop"));
   #endif
 
+  if (!this->isRunning()) return;
   super::stop();
+
   this->data.finishedPrints++;
   this->data.printTime += this->deltaDuration();
   this->saveStats();