Optimize M360

Marlin/src/gcode/host/M360.cpp

@@ -28,16 +28,24 @@
 #include "../../module/motion.h"
 #include "../../module/planner.h"
 
-static void config_prefix(PGM_P const name, PGM_P const pref=nullptr) {
+#if EXTRUDERS
+  #include "../../module/temperature.h"
+#endif
+
+static void config_prefix(PGM_P const name, PGM_P const pref=nullptr, const int8_t ind=-1) {
   SERIAL_ECHOPGM("Config:");
   if (pref) serialprintPGM(pref);
+  if (ind >= 0) { SERIAL_ECHO(int(ind)); SERIAL_CHAR(':'); }
   serialprintPGM(name);
   SERIAL_CHAR(':');
 }
-static void config_line(PGM_P const name, const float val, PGM_P const pref=nullptr) {
-  config_prefix(name, pref);
+static void config_line(PGM_P const name, const float val, PGM_P const pref=nullptr, const int8_t ind=-1) {
+  config_prefix(name, pref, ind);
   SERIAL_ECHOLN(val);
 }
+static void config_line_e(const int8_t e, PGM_P const name, const float val) {
+  config_line(name, val, PSTR("Extr."), e + 1);
+}
 
 /**
  * M360: Report Firmware configuration
@@ -165,24 +173,13 @@ void GcodeSuite::M360() {
   //
   config_line(PSTR("NumExtruder"), EXTRUDERS);
   #if EXTRUDERS
-    #define DIAM_VALUE(N) TERN(NO_VOLUMETRICS, DEFAULT_NOMINAL_FILAMENT_DIA, planner.filament_size[N])
-    #if HAS_LINEAR_E_JERK
-      #define E_JERK_VAL(N) planner.max_e_jerk[E_INDEX_N(N)]
-    #elif HAS_CLASSIC_JERK
-      #define E_JERK_VAL(N) planner.max_jerk.e
-    #else
-      #define E_JERK_VAL(N) DEFAULT_EJERK
-    #endif
-    #define _EXTR_ITEM(N) do{ \
-      PGMSTR(EXTR_STR, "Extr." STRINGIFY(INCREMENT(N)) ":"); \
-      config_line(JERK_STR, E_JERK_VAL(N), EXTR_STR); \
-      config_line(PSTR("MaxSpeed"), planner.settings.max_feedrate_mm_s[E_AXIS_N(N)], EXTR_STR); \
-      config_line(PSTR("Acceleration"), planner.settings.max_acceleration_mm_per_s2[E_AXIS_N(N)], EXTR_STR); \
-      config_line(PSTR("Diameter"), DIAM_VALUE(N), EXTR_STR); \
-      config_line(PSTR("MaxTemp"), (HEATER_##N##_MAXTEMP) - (HOTEND_OVERSHOOT), EXTR_STR); \
-    }while(0)
-
-    REPEAT(EXTRUDERS, _EXTR_ITEM);
+    LOOP_L_N(e, EXTRUDERS) {
+      config_line_e(e, JERK_STR, TERN(HAS_LINEAR_E_JERK, planner.max_e_jerk[E_INDEX_N(e)], TERN(HAS_CLASSIC_JERK, planner.max_jerk.e, DEFAULT_EJERK)));
+      config_line_e(e, PSTR("MaxSpeed"), planner.settings.max_feedrate_mm_s[E_AXIS_N(e)]);
+      config_line_e(e, PSTR("Acceleration"), planner.settings.max_acceleration_mm_per_s2[E_AXIS_N(e)]);
+      config_line_e(e, PSTR("Diameter"), TERN(NO_VOLUMETRICS, DEFAULT_NOMINAL_FILAMENT_DIA, planner.filament_size[e]));
+      config_line_e(e, PSTR("MaxTemp"), thermalManager.heater_maxtemp[e]);
+    }
   #endif
 }