Browse Source

Minor cleanups in Marlin_main.cpp

pull/1/head
Scott Lahteine 8 years ago
parent
commit
c6142aa2a1
  1. 19
      Marlin/Marlin_main.cpp
  2. 3
      Marlin/planner.cpp

19
Marlin/Marlin_main.cpp

@ -1487,7 +1487,7 @@ inline void set_destination_to_current() { memcpy(destination, current_position,
planner.buffer_line(delta[A_AXIS], delta[B_AXIS], delta[C_AXIS], destination[E_AXIS], MMS_SCALED(fr_mm_s ? fr_mm_s : feedrate_mm_s), active_extruder);
set_current_to_destination();
}
#endif
#endif // IS_KINEMATIC
/**
* Plan a move to (X, Y, Z) and set the current_position
@ -1554,16 +1554,12 @@ void do_blocking_move_to(const float &x, const float &y, const float &z, const f
#endif
}
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("<<< do_blocking_move_to");
#endif
#elif IS_SCARA
set_destination_to_current();
// If Z needs to raise, do it before moving XY
if (current_position[Z_AXIS] < z) {
if (destination[Z_AXIS] < z) {
destination[Z_AXIS] = z;
prepare_uninterpolated_move_to_destination(fr_mm_s ? fr_mm_s : homing_feedrate_mm_s[Z_AXIS]);
}
@ -1573,7 +1569,7 @@ void do_blocking_move_to(const float &x, const float &y, const float &z, const f
prepare_uninterpolated_move_to_destination(fr_mm_s ? fr_mm_s : XY_PROBE_FEEDRATE_MM_S);
// If Z needs to lower, do it after moving XY
if (current_position[Z_AXIS] > z) {
if (destination[Z_AXIS] > z) {
destination[Z_AXIS] = z;
prepare_uninterpolated_move_to_destination(fr_mm_s ? fr_mm_s : homing_feedrate_mm_s[Z_AXIS]);
}
@ -1604,6 +1600,10 @@ void do_blocking_move_to(const float &x, const float &y, const float &z, const f
stepper.synchronize();
feedrate_mm_s = old_feedrate_mm_s;
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("<<< do_blocking_move_to");
#endif
}
void do_blocking_move_to_x(const float &x, const float &fr_mm_s/*=0.0*/) {
do_blocking_move_to(x, current_position[Y_AXIS], current_position[Z_AXIS], fr_mm_s);
@ -2846,7 +2846,8 @@ inline void gcode_G4() {
// Move all carriages together linearly until an endstop is hit.
current_position[X_AXIS] = current_position[Y_AXIS] = current_position[Z_AXIS] = (Z_MAX_LENGTH + 10);
planner.buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], homing_feedrate_mm_s[X_AXIS], active_extruder);
feedrate_mm_s = homing_feedrate_mm_s[X_AXIS];
line_to_current_position();
stepper.synchronize();
endstops.hit_on_purpose(); // clear endstop hit flags
@ -9015,7 +9016,7 @@ void stop() {
*/
void setup() {
#ifdef DISABLE_JTAG
#if ENABLED(DISABLE_JTAG)
// Disable JTAG on AT90USB chips to free up pins for IO
MCUCR = 0x80;
MCUCR = 0x80;

3
Marlin/planner.cpp

@ -650,8 +650,7 @@ void Planner::buffer_line(ARG_X, ARG_Y, ARG_Z, const float &e, float fr_mm_s, co
//*/
// DRYRUN ignores all temperature constraints and assures that the extruder is instantly satisfied
if (DEBUGGING(DRYRUN))
position[E_AXIS] = target[E_AXIS];
if (DEBUGGING(DRYRUN)) position[E_AXIS] = target[E_AXIS];
long de = target[E_AXIS] - position[E_AXIS];

Loading…
Cancel
Save