andrey
/
Marlin_FB4S
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

Improve opt_set (etc.) used for tests

vanilla_fb_2.0.x
Scott Lahteine 3 years ago
committed by Scott Lahteine
parent
0e61b4a982
commit
c4fe072751
41 changed files with 229 additions and 475 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 4
      buildroot/bin/opt_enable
  2. 14
      buildroot/bin/opt_set
  3. 2
      buildroot/bin/pins_set
  4. 3
      buildroot/tests/ARMED-tests
  5. 8
      buildroot/tests/BIGTREE_BTT002-tests
  6. 58
      buildroot/tests/BIGTREE_GTR_V1_0-tests
  7. 45
      buildroot/tests/BIGTREE_GTR_V1_0_usb_flash_drive-tests
  8. 25
      buildroot/tests/BIGTREE_SKR_PRO-tests
  9. 27
      buildroot/tests/DUE-tests
  10. 5
      buildroot/tests/FLYF407ZG-tests
  11. 41
      buildroot/tests/FYSETC_F6-tests
  12. 3
      buildroot/tests/FYSETC_S6-tests
  13. 3
      buildroot/tests/LERDGEX-tests
  14. 23
      buildroot/tests/LPC1768-tests
  15. 18
      buildroot/tests/LPC1769-tests
  16. 5
      buildroot/tests/NUCLEO_F767ZI-tests
  17. 22
      buildroot/tests/SAMD51_grandcentral_m4-tests
  18. 3
      buildroot/tests/STM32F070CB_malyan-tests
  19. 9
      buildroot/tests/STM32F103RC_btt-tests
  20. 4
      buildroot/tests/STM32F103RC_btt_USB-tests
  21. 9
      buildroot/tests/STM32F103RC_meeb-tests
  22. 4
      buildroot/tests/STM32F103RE-tests
  23. 7
      buildroot/tests/STM32F103RET6_creality-tests
  24. 10
      buildroot/tests/STM32F103RE_btt-tests
  25. 9
      buildroot/tests/STM32F103RE_btt_USB-tests
  26. 3
      buildroot/tests/STM32F401VE_STEVAL-tests
  27. 23
      buildroot/tests/esp32-tests
  28. 3
      buildroot/tests/linux_native-tests
  29. 16
      buildroot/tests/mega1280-tests
  30. 77
      buildroot/tests/mega2560-tests
  31. 6
      buildroot/tests/mks_robin_lite-tests
  32. 4
      buildroot/tests/mks_robin_mini-tests
  33. 4
      buildroot/tests/mks_robin_nano35-tests
  34. 4
      buildroot/tests/mks_robin_nano35_stm32-tests
  35. 12
      buildroot/tests/mks_robin_pro-tests
  36. 71
      buildroot/tests/rambo-tests
  37. 18
      buildroot/tests/rumba32-tests
  38. 6
      buildroot/tests/sanguino1284p-tests
  39. 9
      buildroot/tests/teensy31-tests
  40. 45
      buildroot/tests/teensy35-tests
  41. 42
      buildroot/tests/teensy41-tests

4
buildroot/bin/opt_enable
View File

@ -7,7 +7,7 @@ SED=$(which gsed || which sed)
for opt in "$@" ; do
# Logic for returning nonzero based on answer here: https://stackoverflow.com/a/15966279/104648
eval "${SED} -i '/\(\/\/\)*[[:blank:]]*\(#define \b${opt}\b\)/{s//\2/;h};\${x;/./{x;q0};x;q9}' Marlin/Configuration.h" ||
eval "${SED} -i '/\(\/\/\)*[[:blank:]]*\(#define \b${opt}\b\)/{s//\2/;h};\${x;/./{x;q0};x;q9}' Marlin/Configuration_adv.h" ||
eval "${SED} -i '/^[[:blank:]]*\(\/\/\)*[[:blank:]]*\(#define \b${opt}\b\)/{s//\2/;h};\${x;/./{x;q0};x;q9}' Marlin/Configuration.h" ||
eval "${SED} -i '/^[[:blank:]]*\(\/\/\)*[[:blank:]]*\(#define \b${opt}\b\)/{s//\2/;h};\${x;/./{x;q0};x;q9}' Marlin/Configuration_adv.h" ||
(echo "ERROR: opt_enable Can't find ${opt}" >&2 && exit 9)
done

14
buildroot/bin/opt_set
View File

@ -5,8 +5,12 @@ set -e
SED=$(which gsed || which sed)
# Logic for returning nonzero based on answer here: https://stackoverflow.com/a/15966279/104648
eval "${SED} -i '/\(\/\/\)*\([[:blank:]]*\)\(#define\s\+\b${1}\b\).*$/{s//\2\3 ${2}/;h};\${x;/./{x;q0};x;q9}' Marlin/Configuration.h" ||
eval "${SED} -i '/\(\/\/\)*\([[:blank:]]*\)\(#define\s\+\b${1}\b\).*$/{s//\2\3 ${2}/;h};\${x;/./{x;q0};x;q9}' Marlin/Configuration_adv.h" ||
eval "echo '#define ${@}' >>Marlin/Configuration_adv.h" ||
(echo "ERROR: opt_set Can't set or add ${1}" >&2 && exit 9)
ARGC=$#
while [[ $# > 1 ]]; do
# Logic for returning nonzero based on answer here: https://stackoverflow.com/a/15966279/104648
eval "${SED} -i '/^[[:blank:]]*\(\/\/\)*\([[:blank:]]*\)\(#define\s\+\b${1}\b\).*$/{s//\2\3 ${2}/;h};\${x;/./{x;q0};x;q9}' Marlin/Configuration.h" ||
eval "${SED} -i '/^[[:blank:]]*\(\/\/\)*\([[:blank:]]*\)\(#define\s\+\b${1}\b\).*$/{s//\2\3 ${2}/;h};\${x;/./{x;q0};x;q9}' Marlin/Configuration_adv.h" ||
eval "echo '#define ${1} ${2}' >>Marlin/Configuration.h" ||
(echo "ERROR: opt_set Can't set or add ${1}" >&2 && exit 9)
shift 2
done

2
buildroot/bin/pins_set
View File

@ -7,5 +7,5 @@ PIN=$2
VAL=$3
SED=$(which gsed || which sed)
eval "${SED} -i '/\(\/\/\)*\(#define \+${PIN}\b\).*$/{s//\2 ${VAL}/;h};\${x;/./{x;q0};x;q9}' Marlin/src/pins/$DIR/pins_${NAM}.h" ||
eval "${SED} -i '/^[[:blank:]]*\(\/\/\)*[[:blank:]]*\(#define \+${PIN}\b\).*$/{s//\2 ${VAL}/;h};\${x;/./{x;q0};x;q9}' Marlin/src/pins/$DIR/pins_${NAM}.h" ||
(echo "ERROR: pins_set Can't find ${PIN}" >&2 && exit 9)

3
buildroot/tests/ARMED-tests
View File

@ -11,8 +11,7 @@ set -e
#
restore_configs
use_example_configs ArmEd
opt_set X_DRIVER_TYPE TMC2130
opt_set Y_DRIVER_TYPE TMC2208
opt_set X_DRIVER_TYPE TMC2130 Y_DRIVER_TYPE TMC2208
exec_test $1 $2 "ArmEd Example Configuration with mixed TMC Drivers" "$3"
# clean up

8
buildroot/tests/BIGTREE_BTT002-tests
View File

@ -10,10 +10,10 @@ set -e
# Build with the default configurations
#
restore_configs
opt_set MOTHERBOARD BOARD_BTT_BTT002_V1_0
opt_set SERIAL_PORT 1
opt_set X_DRIVER_TYPE TMC2209
opt_set Y_DRIVER_TYPE TMC2130
opt_set MOTHERBOARD BOARD_BTT_BTT002_V1_0 \
SERIAL_PORT 1 \
X_DRIVER_TYPE TMC2209 \
Y_DRIVER_TYPE TMC2130
exec_test $1 $2 "BigTreeTech BTT002 Default Configuration plus TMC steppers" "$3"
# clean up

58
buildroot/tests/BIGTREE_GTR_V1_0-tests
View File

@ -7,54 +7,24 @@
set -e
restore_configs
opt_set MOTHERBOARD BOARD_BTT_GTR_V1_0
opt_set SERIAL_PORT -1
opt_set EXTRUDERS 8
opt_set TEMP_SENSOR_1 1
opt_set TEMP_SENSOR_2 1
opt_set TEMP_SENSOR_3 1
opt_set TEMP_SENSOR_4 1
opt_set TEMP_SENSOR_5 1
opt_set TEMP_SENSOR_6 1
opt_set TEMP_SENSOR_7 1
opt_set MOTHERBOARD BOARD_BTT_GTR_V1_0 SERIAL_PORT -1 \
EXTRUDERS 8 TEMP_SENSOR_1 1 TEMP_SENSOR_2 1 TEMP_SENSOR_3 1 TEMP_SENSOR_4 1 TEMP_SENSOR_5 1 TEMP_SENSOR_6 1 TEMP_SENSOR_7 1
# Not necessary to enable auto-fan for all extruders to hit problematic code paths
opt_set E0_AUTO_FAN_PIN PC10
opt_set E1_AUTO_FAN_PIN PC11
opt_set E2_AUTO_FAN_PIN PC12
opt_set X_DRIVER_TYPE TMC2208
opt_set Y_DRIVER_TYPE TMC2130
opt_set NEOPIXEL_PIN PF13
opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER BLTOUCH NEOPIXEL_LED Z_SAFE_HOMING
opt_enable FILAMENT_RUNOUT_SENSOR NOZZLE_PARK_FEATURE ADVANCED_PAUSE_FEATURE
opt_set FIL_RUNOUT_PIN 3
opt_set FIL_RUNOUT2_PIN 4
opt_set FIL_RUNOUT3_PIN 5
opt_set FIL_RUNOUT4_PIN 6
opt_set FIL_RUNOUT5_PIN 7
opt_set FIL_RUNOUT6_PIN 8
opt_set FIL_RUNOUT7_PIN 9
opt_set FIL_RUNOUT8_PIN 10
opt_set FIL_RUNOUT4_STATE HIGH
opt_enable FIL_RUNOUT4_PULLUP
opt_set FIL_RUNOUT8_STATE HIGH
opt_enable FIL_RUNOUT8_PULLUP
exec_test $1 $2 "BigTreeTech GTR 8 Extruders with Auto-Fan, Mixed TMC Drivers, and Runout Sensors with distinct states" "$3"
opt_set E0_AUTO_FAN_PIN PC10 E1_AUTO_FAN_PIN PC11 E2_AUTO_FAN_PIN PC12 NEOPIXEL_PIN PF13 \
X_DRIVER_TYPE TMC2208 Y_DRIVER_TYPE TMC2130 \
FIL_RUNOUT_PIN 3 FIL_RUNOUT2_PIN 4 FIL_RUNOUT3_PIN 5 FIL_RUNOUT4_PIN 6 FIL_RUNOUT5_PIN 7 FIL_RUNOUT6_PIN 8 FIL_RUNOUT7_PIN 9 FIL_RUNOUT8_PIN 10 \
FIL_RUNOUT4_STATE HIGH FIL_RUNOUT8_STATE HIGH
opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER BLTOUCH NEOPIXEL_LED Z_SAFE_HOMING NOZZLE_PARK_FEATURE ADVANCED_PAUSE_FEATURE \
FILAMENT_RUNOUT_SENSOR FIL_RUNOUT4_PULLUP FIL_RUNOUT8_PULLUP
exec_test $1 $2 "BigTreeTech GTR | 8 Extruders | Auto-Fan | Mixed TMC Drivers | Runout Sensors w/ distinct states" "$3"
restore_configs
opt_set MOTHERBOARD BOARD_BTT_GTR_V1_0
opt_set SERIAL_PORT -1
opt_set EXTRUDERS 6
opt_set TEMP_SENSOR_1 1
opt_set TEMP_SENSOR_2 1
opt_set TEMP_SENSOR_3 1
opt_set TEMP_SENSOR_4 1
opt_set TEMP_SENSOR_5 1
opt_set NUM_Z_STEPPER_DRIVERS 3
opt_set DEFAULT_Kp_LIST "{ 22.2, 20.0, 21.0, 19.0, 18.0, 17.0 }"
opt_set DEFAULT_Ki_LIST "{ 1.08 }"
opt_set DEFAULT_Kd_LIST "{ 114.0, 112.0, 110.0, 108.0 }"
opt_set MOTHERBOARD BOARD_BTT_GTR_V1_0 SERIAL_PORT -1 \
EXTRUDERS 6 TEMP_SENSOR_1 1 TEMP_SENSOR_2 1 TEMP_SENSOR_3 1 TEMP_SENSOR_4 1 TEMP_SENSOR_5 1 \
NUM_Z_STEPPER_DRIVERS 3 \
DEFAULT_Kp_LIST '{ 22.2, 20.0, 21.0, 19.0, 18.0, 17.0 }' DEFAULT_Ki_LIST '{ 1.08 }' DEFAULT_Kd_LIST '{ 114.0, 112.0, 110.0, 108.0 }'
opt_enable TOOLCHANGE_FILAMENT_SWAP TOOLCHANGE_MIGRATION_FEATURE TOOLCHANGE_FS_INIT_BEFORE_SWAP TOOLCHANGE_FS_PRIME_FIRST_USED PID_PARAMS_PER_HOTEND
exec_test $1 $2 "BigTreeTech GTR 6 Extruders Triple Z" "$3"
exec_test $1 $2 "BigTreeTech GTR | 6 Extruders | Triple Z" "$3"
# clean up
restore_configs

45
buildroot/tests/BIGTREE_GTR_V1_0_usb_flash_drive-tests
View File

@ -7,41 +7,18 @@
set -e
restore_configs
opt_set MOTHERBOARD BOARD_BTT_GTR_V1_0
opt_set SERIAL_PORT 3
opt_set EXTRUDERS 8
opt_set TEMP_SENSOR_1 1
opt_set TEMP_SENSOR_2 1
opt_set TEMP_SENSOR_3 1
opt_set TEMP_SENSOR_4 1
opt_set TEMP_SENSOR_5 1
opt_set TEMP_SENSOR_6 1
opt_set TEMP_SENSOR_7 1
opt_set SDSUPPORT
opt_set USB_FLASH_DRIVE_SUPPORT
opt_set USE_OTG_USB_HOST
opt_set MOTHERBOARD BOARD_BTT_GTR_V1_0 SERIAL_PORT 3 \
EXTRUDERS 8 TEMP_SENSOR_1 1 TEMP_SENSOR_2 1 TEMP_SENSOR_3 1 TEMP_SENSOR_4 1 TEMP_SENSOR_5 1 TEMP_SENSOR_6 1 TEMP_SENSOR_7 1
opt_enable SDSUPPORT USB_FLASH_DRIVE_SUPPORT USE_OTG_USB_HOST \
REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER BLTOUCH NEOPIXEL_LED Z_SAFE_HOMING \
FILAMENT_RUNOUT_SENSOR NOZZLE_PARK_FEATURE ADVANCED_PAUSE_FEATURE
# Not necessary to enable auto-fan for all extruders to hit problematic code paths
opt_set E0_AUTO_FAN_PIN PC10
opt_set E1_AUTO_FAN_PIN PC11
opt_set E2_AUTO_FAN_PIN PC12
opt_set X_DRIVER_TYPE TMC2208
opt_set Y_DRIVER_TYPE TMC2130
opt_set NEOPIXEL_PIN PF13
opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER BLTOUCH NEOPIXEL_LED Z_SAFE_HOMING
opt_enable FILAMENT_RUNOUT_SENSOR NOZZLE_PARK_FEATURE ADVANCED_PAUSE_FEATURE
opt_set FIL_RUNOUT_PIN 3
opt_set FIL_RUNOUT2_PIN 4
opt_set FIL_RUNOUT3_PIN 5
opt_set FIL_RUNOUT4_PIN 6
opt_set FIL_RUNOUT5_PIN 7
opt_set FIL_RUNOUT6_PIN 8
opt_set FIL_RUNOUT7_PIN 9
opt_set FIL_RUNOUT8_PIN 10
opt_set FIL_RUNOUT4_STATE HIGH
opt_enable FIL_RUNOUT4_PULLUP
opt_set FIL_RUNOUT8_STATE HIGH
opt_enable FIL_RUNOUT8_PULLUP
exec_test $1 $2 "BigTreeTech GTR + OTG USB Flash Drive + Extruders with Auto-Fan, Mixed TMC Drivers, and Runout Sensors with distinct states" "$3"
opt_set E0_AUTO_FAN_PIN PC10 E1_AUTO_FAN_PIN PC11 E2_AUTO_FAN_PIN PC12 NEOPIXEL_PIN PF13 \
X_DRIVER_TYPE TMC2208 Y_DRIVER_TYPE TMC2130 \
FIL_RUNOUT_PIN 3 FIL_RUNOUT2_PIN 4 FIL_RUNOUT3_PIN 5 FIL_RUNOUT4_PIN 6 FIL_RUNOUT5_PIN 7 FIL_RUNOUT6_PIN 8 FIL_RUNOUT7_PIN 9 FIL_RUNOUT8_PIN 10 \
FIL_RUNOUT4_STATE HIGH FIL_RUNOUT8_STATE HIGH
opt_enable FIL_RUNOUT4_PULLUP FIL_RUNOUT8_PULLUP
exec_test $1 $2 "GTT GTR | OTG USB Flash Drive | 8 Extruders | Auto-Fan | Mixed TMC Drivers | Runout Sensors (distinct)" "$3"
# clean up
restore_configs

25
buildroot/tests/BIGTREE_SKR_PRO-tests
View File

@ -10,31 +10,22 @@ set -e
# Build with the default configurations
#
restore_configs
opt_set MOTHERBOARD BOARD_BTT_SKR_PRO_V1_1
opt_set SERIAL_PORT 1
opt_set MOTHERBOARD BOARD_BTT_SKR_PRO_V1_1 SERIAL_PORT 1
exec_test $1 $2 "BigTreeTech SKR Pro Default Configuration" "$3"
restore_configs
opt_set MOTHERBOARD BOARD_BTT_SKR_PRO_V1_1
opt_set SERIAL_PORT -1
opt_set EXTRUDERS 3
opt_set TEMP_SENSOR_1 1
opt_set TEMP_SENSOR_2 1
opt_set E0_AUTO_FAN_PIN PC10
opt_set E1_AUTO_FAN_PIN PC11
opt_set E2_AUTO_FAN_PIN PC12
opt_set X_DRIVER_TYPE TMC2209
opt_set Y_DRIVER_TYPE TMC2130
opt_set MOTHERBOARD BOARD_BTT_SKR_PRO_V1_1 SERIAL_PORT -1 \
EXTRUDERS 3 TEMP_SENSOR_1 1 TEMP_SENSOR_2 1 \
E0_AUTO_FAN_PIN PC10 E1_AUTO_FAN_PIN PC11 E2_AUTO_FAN_PIN PC12 \
X_DRIVER_TYPE TMC2209 Y_DRIVER_TYPE TMC2130
opt_enable BLTOUCH EEPROM_SETTINGS AUTO_BED_LEVELING_3POINT Z_SAFE_HOMING PINS_DEBUGGING
exec_test $1 $2 "BigTreeTech SKR Pro 3 Extruders, Auto-Fan, BLTOUCH, mixed TMC drivers" "$3"
restore_configs
opt_set MOTHERBOARD BOARD_BTT_SKR_PRO_V1_1
opt_set SERIAL_PORT -1
opt_set MOTHERBOARD BOARD_BTT_SKR_PRO_V1_1 SERIAL_PORT -1 \
CUTTER_POWER_UNIT PERCENT \
SPINDLE_LASER_PWM_PIN HEATER_1_PIN SPINDLE_LASER_ENA_PIN HEATER_2_PIN
opt_enable LASER_FEATURE REPRAP_DISCOUNT_SMART_CONTROLLER
opt_set CUTTER_POWER_UNIT PERCENT
opt_add SPINDLE_LASER_PWM_PIN HEATER_1_PIN
opt_add SPINDLE_LASER_ENA_PIN HEATER_2_PIN
exec_test $1 $2 "Laser, LCD, PERCENT power unit" "$3"
# clean up

27
buildroot/tests/DUE-tests
View File

@ -7,12 +7,12 @@
set -e
restore_configs
opt_set LCD_LANGUAGE bg
opt_set MOTHERBOARD BOARD_RAMPS4DUE_EFB
opt_set TEMP_SENSOR_0 -2
opt_set TEMP_SENSOR_BED 2
opt_set GRID_MAX_POINTS_X 16
opt_set FANMUX0_PIN 53
opt_set MOTHERBOARD BOARD_RAMPS4DUE_EFB \
LCD_LANGUAGE bg \
TEMP_SENSOR_0 -2 TEMP_SENSOR_BED 2 \
GRID_MAX_POINTS_X 16 \
E0_AUTO_FAN_PIN 8 FANMUX0_PIN 53 EXTRUDER_AUTO_FAN_SPEED 100 \
TEMP_SENSOR_CHAMBER 3 TEMP_CHAMBER_PIN 6 HEATER_CHAMBER_PIN 45
opt_enable S_CURVE_ACCELERATION EEPROM_SETTINGS GCODE_MACROS \
FIX_MOUNTED_PROBE Z_SAFE_HOMING CODEPENDENT_XY_HOMING \
ASSISTED_TRAMMING ASSISTED_TRAMMING_WIZARD REPORT_TRAMMING_MM ASSISTED_TRAMMING_WAIT_POSITION \
@ -28,23 +28,17 @@ opt_enable S_CURVE_ACCELERATION EEPROM_SETTINGS GCODE_MACROS \
PIDTEMPBED SLOW_PWM_HEATERS THERMAL_PROTECTION_CHAMBER \
PINS_DEBUGGING MAX7219_DEBUG M114_DETAIL \
EXTENSIBLE_UI
opt_add EXTUI_EXAMPLE
opt_set E0_AUTO_FAN_PIN 8
opt_set EXTRUDER_AUTO_FAN_SPEED 100
opt_set TEMP_SENSOR_CHAMBER 3
opt_add TEMP_CHAMBER_PIN 6
opt_set HEATER_CHAMBER_PIN 45
opt_add EXTUI_EXAMPLE
exec_test $1 $2 "RAMPS4DUE_EFB with ABL (Bilinear), ExtUI, S-Curve, many options." "$3"
#
# RADDS with BLTouch, ABL(B), 3 x Z auto-align
#
restore_configs
opt_set MOTHERBOARD BOARD_RADDS
opt_set MOTHERBOARD BOARD_RADDS NUM_Z_STEPPER_DRIVERS 3
opt_enable USE_XMAX_PLUG USE_YMAX_PLUG ENDSTOPPULLUPS BLTOUCH AUTO_BED_LEVELING_BILINEAR \
Z_STEPPER_AUTO_ALIGN Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS Z_SAFE_HOMING
#TOUCH_UI_FTDI_EVE LCD_ALEPHOBJECTS_CLCD_UI OTHER_PIN_LAYOUT
opt_set NUM_Z_STEPPER_DRIVERS 3
pins_set ramps/RAMPS X_MAX_PIN -1
pins_set ramps/RAMPS Y_MAX_PIN -1
exec_test $1 $2 "RADDS with ABL (Bilinear), Triple Z Axis, Z_STEPPER_AUTO_ALIGN" "$3"
@ -53,9 +47,6 @@ exec_test $1 $2 "RADDS with ABL (Bilinear), Triple Z Axis, Z_STEPPER_AUTO_ALIGN"
# Test SWITCHING_EXTRUDER
#
restore_configs
opt_set LCD_LANGUAGE fi
opt_set MOTHERBOARD BOARD_RAMPS4DUE_EEF
opt_set EXTRUDERS 2
opt_set NUM_SERVOS 1
opt_set MOTHERBOARD BOARD_RAMPS4DUE_EEF LCD_LANGUAGE fi EXTRUDERS 2 NUM_SERVOS 1
opt_enable SWITCHING_EXTRUDER ULTIMAKERCONTROLLER BEEP_ON_FEEDRATE_CHANGE POWER_LOSS_RECOVERY
exec_test $1 $2 "RAMPS4DUE_EEF with SWITCHING_EXTRUDER, POWER_LOSS_RECOVERY" "$3"

5
buildroot/tests/FLYF407ZG-tests
View File

@ -8,10 +8,7 @@ set -e
# Build examples
restore_configs
opt_set MOTHERBOARD BOARD_FLYF407ZG
opt_set SERIAL_PORT -1
opt_set X_DRIVER_TYPE TMC2208
opt_set Y_DRIVER_TYPE TMC2130
opt_set MOTHERBOARD BOARD_FLYF407ZG SERIAL_PORT -1 X_DRIVER_TYPE TMC2208 Y_DRIVER_TYPE TMC2130
exec_test $1 $2 "FLYF407ZG Default Config with mixed TMC Drivers" "$3"
# cleanup

41
buildroot/tests/FYSETC_F6-tests
View File

@ -18,34 +18,24 @@ exec_test $1 $2 "FYSETC F6 1.3 with DGUS" "$3"
# Delta Config (generic) + UBL + ALLEN_KEY + EEPROM_SETTINGS + OLED_PANEL_TINYBOY2
#
use_example_configs delta/generic
opt_set MOTHERBOARD BOARD_FYSETC_F6_13
opt_set MOTHERBOARD BOARD_FYSETC_F6_13 \
LCD_LANGUAGE ko_KR \
X_DRIVER_TYPE L6470 Y_DRIVER_TYPE L6470 Z_DRIVER_TYPE L6470 \
L6470_CHAIN_SCK_PIN 53 L6470_CHAIN_MISO_PIN 49 L6470_CHAIN_MOSI_PIN 40 L6470_CHAIN_SS_PIN 42 \
'ENABLE_RESET_L64XX_CHIPS(V)' NOOP
opt_enable RESTORE_LEVELING_AFTER_G28 EEPROM_SETTINGS EEPROM_CHITCHAT \
Z_PROBE_ALLEN_KEY AUTO_BED_LEVELING_UBL \
OLED_PANEL_TINYBOY2 MESH_EDIT_GFX_OVERLAY DELTA_CALIBRATION_MENU
opt_set LCD_LANGUAGE ko_KR
opt_set X_DRIVER_TYPE L6470
opt_set Y_DRIVER_TYPE L6470
opt_set Z_DRIVER_TYPE L6470
opt_add L6470_CHAIN_SCK_PIN 53
opt_add L6470_CHAIN_MISO_PIN 49
opt_add L6470_CHAIN_MOSI_PIN 40
opt_add L6470_CHAIN_SS_PIN 42
opt_add "ENABLE_RESET_L64XX_CHIPS(V) NOOP"
exec_test $1 $2 "DELTA, RAMPS, L6470, UBL, Allen Key, EEPROM, OLED_PANEL_TINYBOY2..." "$3"
#
# Test mixed TMC config
#
restore_configs
opt_set MOTHERBOARD BOARD_FYSETC_F6_13
opt_set LCD_LANGUAGE vi
opt_set LCD_LANGUAGE_2 fr
opt_set X_DRIVER_TYPE TMC2160
opt_set Y_DRIVER_TYPE TMC5160
opt_set Z_DRIVER_TYPE TMC2208_STANDALONE
opt_set E0_DRIVER_TYPE TMC2130
opt_set X_MIN_ENDSTOP_INVERTING true
opt_set Y_MIN_ENDSTOP_INVERTING true
opt_set MOTHERBOARD BOARD_FYSETC_F6_13 \
LCD_LANGUAGE vi LCD_LANGUAGE_2 fr \
X_DRIVER_TYPE TMC2160 Y_DRIVER_TYPE TMC5160 Z_DRIVER_TYPE TMC2208_STANDALONE E0_DRIVER_TYPE TMC2130 \
X_MIN_ENDSTOP_INVERTING true Y_MIN_ENDSTOP_INVERTING true
opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER \
MARLIN_BRICKOUT MARLIN_INVADERS MARLIN_SNAKE \
MONITOR_DRIVER_STATUS STEALTHCHOP_XY STEALTHCHOP_Z STEALTHCHOP_E HYBRID_THRESHOLD \
@ -63,17 +53,14 @@ exec_test $1 $2 "RAMPS 1.3 | DELTA | FLSUN AC Config" "$3"
# SCARA with Mixed TMC
#
use_example_configs SCARA/Morgan
opt_set MOTHERBOARD BOARD_FYSETC_F6_13
opt_set LCD_LANGUAGE es
opt_set MOTHERBOARD BOARD_FYSETC_F6_13 \
LCD_LANGUAGE es \
X_MAX_ENDSTOP_INVERTING false \
X_DRIVER_TYPE TMC2209 Y_DRIVER_TYPE TMC2130 Z_DRIVER_TYPE TMC2130_STANDALONE E0_DRIVER_TYPE TMC2660 \
X_HARDWARE_SERIAL Serial2
opt_enable USE_ZMIN_PLUG FIX_MOUNTED_PROBE AUTO_BED_LEVELING_BILINEAR PAUSE_BEFORE_DEPLOY_STOW \
FYSETC_242_OLED_12864 EEPROM_SETTINGS EEPROM_CHITCHAT M114_DETAIL Z_SAFE_HOMING \
STEALTHCHOP_XY STEALTHCHOP_Z STEALTHCHOP_E HYBRID_THRESHOLD SENSORLESS_HOMING SQUARE_WAVE_STEPPING
opt_set X_MAX_ENDSTOP_INVERTING false
opt_set X_DRIVER_TYPE TMC2209
opt_set Y_DRIVER_TYPE TMC2130
opt_set Z_DRIVER_TYPE TMC2130_STANDALONE
opt_set E0_DRIVER_TYPE TMC2660
opt_add X_HARDWARE_SERIAL Serial2
exec_test $1 $2 "FYSETC_F6 | SCARA | Mixed TMC | EEPROM" "$3"
# clean up

3
buildroot/tests/FYSETC_S6-tests
View File

@ -10,8 +10,7 @@ set -e
restore_configs
use_example_configs FYSETC/S6
opt_enable MEATPACK
opt_set Y_DRIVER_TYPE TMC2209
opt_set Z_DRIVER_TYPE TMC2130
opt_set Y_DRIVER_TYPE TMC2209 Z_DRIVER_TYPE TMC2130
exec_test $1 $2 "FYSETC S6 Example" "$3"
# cleanup

3
buildroot/tests/LERDGEX-tests
View File

@ -10,8 +10,7 @@ set -e
# Build with the default configurations
#
restore_configs
opt_set MOTHERBOARD BOARD_LERDGE_X
opt_set SERIAL_PORT 1
opt_set MOTHERBOARD BOARD_LERDGE_X SERIAL_PORT 1
exec_test $1 $2 "LERDGE X with Default Configuration" "$3"
# clean up

23
buildroot/tests/LPC1768-tests
View File

@ -14,9 +14,8 @@ set -e
#exec_test $1 $2 "Default Configuration" "$3"
restore_configs
opt_set MOTHERBOARD BOARD_RAMPS_14_RE_ARM_EFB
opt_set MOTHERBOARD BOARD_RAMPS_14_RE_ARM_EFB NEOPIXEL_PIN P1_16
opt_enable VIKI2 SDSUPPORT SDCARD_READONLY SERIAL_PORT_2 NEOPIXEL_LED
opt_set NEOPIXEL_PIN P1_16
exec_test $1 $2 "ReARM EFB VIKI2, SDSUPPORT, 2 Serial ports (USB CDC + UART0), NeoPixel" "$3"
#restore_configs
@ -24,19 +23,18 @@ exec_test $1 $2 "ReARM EFB VIKI2, SDSUPPORT, 2 Serial ports (USB CDC + UART0), N
#exec_test $1 $2 "MKS SBASE Example Config" "$3"
restore_configs
opt_set MOTHERBOARD BOARD_MKS_SBASE
opt_set EXTRUDERS 2
opt_set TEMP_SENSOR_1 1
opt_set NUM_SERVOS 2
opt_set SERVO_DELAY "{ 300, 300 }"
opt_set MOTHERBOARD BOARD_MKS_SBASE \
EXTRUDERS 2 TEMP_SENSOR_1 1 \
NUM_SERVOS 2 SERVO_DELAY '{ 300, 300 }'
opt_enable SWITCHING_NOZZLE SWITCHING_NOZZLE_E1_SERVO_NR ULTIMAKERCONTROLLER
exec_test $1 $2 "MKS SBASE with SWITCHING_NOZZLE" "$3"
restore_configs
opt_set MOTHERBOARD BOARD_RAMPS_14_RE_ARM_EEB
opt_set EXTRUDERS 2
opt_set TEMP_SENSOR_1 -1
opt_set TEMP_SENSOR_BED 5
opt_set MOTHERBOARD BOARD_RAMPS_14_RE_ARM_EEB \
EXTRUDERS 2 TEMP_SENSOR_1 -1 TEMP_SENSOR_BED 5 \
GRID_MAX_POINTS_X 16 \
NOZZLE_TO_PROBE_OFFSET '{ 0, 0, 0 }' \
NOZZLE_CLEAN_MIN_TEMP 170
opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER ADAPTIVE_FAN_SLOWING NO_FAN_SLOWING_IN_PID_TUNING \
FILAMENT_WIDTH_SENSOR FILAMENT_LCD_DISPLAY PID_EXTRUSION_SCALING SOUND_MENU_ITEM \
NOZZLE_AS_PROBE AUTO_BED_LEVELING_BILINEAR PREHEAT_BEFORE_LEVELING G29_RETRY_AND_RECOVER Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \
@ -46,9 +44,6 @@ opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER ADAPTIVE_FAN_SLOWING NO
HOST_KEEPALIVE_FEATURE HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT \
LCD_INFO_MENU ARC_SUPPORT BEZIER_CURVE_SUPPORT EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES \
SDSUPPORT SDCARD_SORT_ALPHA AUTO_REPORT_SD_STATUS EMERGENCY_PARSER
opt_set GRID_MAX_POINTS_X 16
opt_set NOZZLE_TO_PROBE_OFFSET "{ 0, 0, 0 }"
opt_set NOZZLE_CLEAN_MIN_TEMP 170
exec_test $1 $2 "Re-ARM with NOZZLE_AS_PROBE and many features." "$3"
# clean up

18
buildroot/tests/LPC1769-tests
View File

@ -13,17 +13,15 @@ use_example_configs Azteeg/X5GT
exec_test $1 $2 "Azteeg X5GT Example Configuration" "$3"
restore_configs
opt_set MOTHERBOARD BOARD_SMOOTHIEBOARD
opt_set EXTRUDERS 2
opt_set TEMP_SENSOR_1 -1
opt_set TEMP_SENSOR_BED 5
opt_set MOTHERBOARD BOARD_SMOOTHIEBOARD \
EXTRUDERS 2 TEMP_SENSOR_1 -1 TEMP_SENSOR_BED 5 \
GRID_MAX_POINTS_X 16
opt_enable TFTGLCD_PANEL_SPI SDSUPPORT ADAPTIVE_FAN_SLOWING NO_FAN_SLOWING_IN_PID_TUNING \
FIX_MOUNTED_PROBE AUTO_BED_LEVELING_BILINEAR G29_RETRY_AND_RECOVER Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \
BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET LEVEL_CORNERS_USE_PROBE LEVEL_CORNERS_VERIFY_RAISED \
PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE SLOW_PWM_HEATERS PIDTEMPBED EEPROM_SETTINGS INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT \
Z_SAFE_HOMING ADVANCED_PAUSE_FEATURE PARK_HEAD_ON_PAUSE \
LCD_INFO_MENU ARC_SUPPORT BEZIER_CURVE_SUPPORT EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES SDCARD_SORT_ALPHA EMERGENCY_PARSER
opt_set GRID_MAX_POINTS_X 16
exec_test $1 $2 "Smoothieboard with TFTGLCD_PANEL_SPI and many features" "$3"
#restore_configs
@ -36,17 +34,13 @@ exec_test $1 $2 "Smoothieboard with TFTGLCD_PANEL_SPI and many features" "$3"
# SD_ABORT_ON_ENDSTOP_HIT ADVANCED_OK GCODE_MACROS \
# VOLUMETRIC_DEFAULT_ON NO_WORKSPACE_OFFSETS \
# EXTRA_FAN_SPEED FWRETRACT MENU_ADDAUTOSTART SDCARD_SORT_ALPHA
#opt_set FAN_MIN_PWM 50
#opt_set FAN_KICKSTART_TIME 100
#opt_set XY_FREQUENCY_LIMIT 15
#opt_set FAN_MIN_PWM 50 FAN_KICKSTART_TIME 100 XY_FREQUENCY_LIMIT 15
#exec_test $1 $2 "Azteeg X5 MINI WIFI Many less common options" "$3"
restore_configs
use_example_configs delta/generic
opt_set MOTHERBOARD BOARD_COHESION3D_REMIX
opt_set X_DRIVER_TYPE TMC2130
opt_set Y_DRIVER_TYPE TMC2130
opt_set Z_DRIVER_TYPE TMC2130
opt_set MOTHERBOARD BOARD_COHESION3D_REMIX \
X_DRIVER_TYPE TMC2130 Y_DRIVER_TYPE TMC2130 Z_DRIVER_TYPE TMC2130
opt_enable AUTO_BED_LEVELING_BILINEAR EEPROM_SETTINGS EEPROM_CHITCHAT MECHANICAL_GANTRY_CALIBRATION \
TMC_USE_SW_SPI MONITOR_DRIVER_STATUS STEALTHCHOP_XY STEALTHCHOP_Z HYBRID_THRESHOLD \
SENSORLESS_PROBING Z_SAFE_HOMING X_STALL_SENSITIVITY Y_STALL_SENSITIVITY Z_STALL_SENSITIVITY TMC_DEBUG \

5
buildroot/tests/NUCLEO_F767ZI-tests
View File

@ -10,11 +10,8 @@ set -e
# Build with the default configurations
#
restore_configs
opt_set MOTHERBOARD BOARD_NUCLEO_F767ZI
opt_set SERIAL_PORT -1
opt_set MOTHERBOARD BOARD_NUCLEO_F767ZI SERIAL_PORT -1 X_DRIVER_TYPE TMC2209 Y_DRIVER_TYPE TMC2208
opt_enable BLTOUCH Z_SAFE_HOMING SPEAKER SOFTWARE_DRIVER_ENABLE
opt_set X_DRIVER_TYPE TMC2209
opt_set Y_DRIVER_TYPE TMC2208
exec_test $1 $2 "Mixed timer usage" "$3"
# clean up

22
buildroot/tests/SAMD51_grandcentral_m4-tests
View File

@ -10,20 +10,14 @@ set -e
# Build with the default configurations
#
restore_configs
opt_set SERIAL_PORT -1
opt_set MOTHERBOARD BOARD_AGCM4_RAMPS_144
opt_set TEMP_SENSOR_0 11
opt_set TEMP_SENSOR_BED 11
opt_set X_DRIVER_TYPE TMC2209
opt_set Y_DRIVER_TYPE TMC2209
opt_set Z_DRIVER_TYPE TMC2209
opt_set Z2_DRIVER_TYPE TMC2209
opt_set E0_DRIVER_TYPE TMC2209
opt_set RESTORE_LEVELING_AFTER_G28 false
opt_set LCD_LANGUAGE it
opt_set NUM_Z_STEPPER_DRIVERS 2
opt_set HOMING_BUMP_MM "{ 0, 0, 0 }"
opt_set SDCARD_CONNECTION LCD
opt_set MOTHERBOARD BOARD_AGCM4_RAMPS_144 SERIAL_PORT -1 \
TEMP_SENSOR_0 11 TEMP_SENSOR_BED 11 \
X_DRIVER_TYPE TMC2209 Y_DRIVER_TYPE TMC2209 Z_DRIVER_TYPE TMC2209 Z2_DRIVER_TYPE TMC2209 E0_DRIVER_TYPE TMC2209 \
RESTORE_LEVELING_AFTER_G28 false \
LCD_LANGUAGE it \
SDCARD_CONNECTION LCD \
NUM_Z_STEPPER_DRIVERS 2 \
HOMING_BUMP_MM '{ 0, 0, 0 }'
opt_enable ENDSTOP_INTERRUPTS_FEATURE S_CURVE_ACCELERATION BLTOUCH Z_MIN_PROBE_REPEATABILITY_TEST \
FILAMENT_RUNOUT_SENSOR G26_MESH_VALIDATION MESH_EDIT_GFX_OVERLAY Z_SAFE_HOMING \
EEPROM_SETTINGS NOZZLE_PARK_FEATURE SDSUPPORT SD_CHECK_AND_RETRY \

3
buildroot/tests/STM32F070CB_malyan-tests
View File

@ -7,8 +7,7 @@
set -e
restore_configs
opt_set MOTHERBOARD BOARD_MALYAN_M200_V2
opt_set SERIAL_PORT -1
opt_set MOTHERBOARD BOARD_MALYAN_M200_V2 SERIAL_PORT -1
exec_test $1 $2 "Malyan M200 v2 Default Config" "$3"
# cleanup

9
buildroot/tests/STM32F103RC_btt-tests
View File

@ -10,13 +10,8 @@ set -e
# Build with the default configurations
#
restore_configs
opt_set MOTHERBOARD BOARD_BTT_SKR_MINI_E3_V1_0
opt_set SERIAL_PORT 1
opt_set SERIAL_PORT_2 -1
opt_set X_DRIVER_TYPE TMC2209
opt_set Y_DRIVER_TYPE TMC2209
opt_set Z_DRIVER_TYPE TMC2209
opt_set E0_DRIVER_TYPE TMC2209
opt_set MOTHERBOARD BOARD_BTT_SKR_MINI_E3_V1_0 SERIAL_PORT 1 SERIAL_PORT_2 -1 \
X_DRIVER_TYPE TMC2209 Y_DRIVER_TYPE TMC2209 Z_DRIVER_TYPE TMC2209 E0_DRIVER_TYPE TMC2209
opt_enable PINS_DEBUGGING Z_IDLE_HEIGHT
exec_test $1 $2 "BigTreeTech SKR Mini E3 1.0 - Basic Config with TMC2209 HW Serial" "$3"

4
buildroot/tests/STM32F103RC_btt_USB-tests
View File

@ -10,9 +10,7 @@ set -e
# Build with the default configurations
#
restore_configs
opt_set MOTHERBOARD BOARD_BTT_SKR_MINI_V1_1
opt_set SERIAL_PORT 1
opt_set SERIAL_PORT_2 -1
opt_set MOTHERBOARD BOARD_BTT_SKR_MINI_V1_1 SERIAL_PORT 1 SERIAL_PORT_2 -1
exec_test $1 $2 "BigTreeTech SKR Mini v1.1 - Basic Configuration" "$3"
# clean up

9
buildroot/tests/STM32F103RC_meeb-tests
View File

@ -10,13 +10,8 @@ set -e
# Build with the default configurations
#
restore_configs
opt_set MOTHERBOARD BOARD_CCROBOT_MEEB_3DP
opt_set SERIAL_PORT 1
opt_set SERIAL_PORT_2 -1
opt_set X_DRIVER_TYPE TMC2208
opt_set Y_DRIVER_TYPE TMC2208
opt_set Z_DRIVER_TYPE TMC2208
opt_set E0_DRIVER_TYPE TMC2208
opt_set MOTHERBOARD BOARD_CCROBOT_MEEB_3DP SERIAL_PORT 1 SERIAL_PORT_2 -1 \
X_DRIVER_TYPE TMC2208 Y_DRIVER_TYPE TMC2208 Z_DRIVER_TYPE TMC2208 E0_DRIVER_TYPE TMC2208
exec_test $1 $2 "MEEB_3DP - Basic Config with TMC2208 SW Serial" "$3"
# clean up

4
buildroot/tests/STM32F103RE-tests
View File

@ -10,9 +10,7 @@ set -e
# Build with the default configurations
#
restore_configs
opt_set MOTHERBOARD BOARD_STM32F103RE
opt_set EXTRUDERS 2
opt_set SERIAL_PORT -1
opt_set MOTHERBOARD BOARD_STM32F103RE SERIAL_PORT -1 EXTRUDERS 2
opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT \
PAREN_COMMENTS GCODE_MOTION_MODES SINGLENOZZLE TOOLCHANGE_FILAMENT_SWAP TOOLCHANGE_PARK \
BAUD_RATE_GCODE GCODE_MACROS NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE

7
buildroot/tests/STM32F103RET6_creality-tests
View File

@ -19,11 +19,10 @@ opt_add SDCARD_EEPROM_EMULATION
exec_test $1 $2 "Ender 3 v2, SD EEPROM, w/o CLASSIC_JERK" "$3"
restore_configs
opt_set SERIAL_PORT 1
opt_set MOTHERBOARD BOARD_CREALITY_V452
opt_set MOTHERBOARD BOARD_CREALITY_V452 SERIAL_PORT 1
opt_disable NOZZLE_TO_PROBE_OFFSET
opt_enable NOZZLE_AS_PROBE Z_SAFE_HOMING Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
opt_enable PROBE_ACTIVATION_SWITCH PROBE_TARE PROBE_TARE_ONLY_WHILE_INACTIVE
opt_enable NOZZLE_AS_PROBE Z_SAFE_HOMING Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN \
PROBE_ACTIVATION_SWITCH PROBE_TARE PROBE_TARE_ONLY_WHILE_INACTIVE
exec_test $1 $2 "Creality V4.5.2 PROBE_ACTIVATION_SWITCH, Probe Tare" "$3"
# clean up

10
buildroot/tests/STM32F103RE_btt-tests
View File

@ -10,12 +10,10 @@ set -e
# Build with the default configurations
#
restore_configs
opt_set MOTHERBOARD BOARD_BTT_SKR_E3_DIP
opt_set SERIAL_PORT 1
opt_set SERIAL_PORT_2 -1
opt_set X_DRIVER_TYPE TMC2209
opt_set Y_DRIVER_TYPE TMC2130
exec_test $1 $2 "BigTreeTech SKR E3 DIP v1.0 - Basic Config with mixed TMC Drivers" "$3"
opt_set MOTHERBOARD BOARD_BTT_SKR_E3_DIP \
SERIAL_PORT 1 SERIAL_PORT_2 -1 \
X_DRIVER_TYPE TMC2209 Y_DRIVER_TYPE TMC2130
exec_test $1 $2 "BTT SKR E3 DIP 1.0 | Mixed TMC Drivers" "$3"
# clean up
restore_configs

9
buildroot/tests/STM32F103RE_btt_USB-tests
View File

@ -10,16 +10,11 @@ set -e
# Build with the default configurations
#
restore_configs
opt_set MOTHERBOARD BOARD_BTT_SKR_E3_DIP
opt_set SERIAL_PORT 1
opt_set SERIAL_PORT_2 -1
opt_set MOTHERBOARD BOARD_BTT_SKR_E3_DIP SERIAL_PORT 1 SERIAL_PORT_2 -1
exec_test $1 $2 "BigTreeTech SKR E3 DIP v1.0 - Basic Configuration" "$3"
restore_configs
opt_set MOTHERBOARD BOARD_BTT_SKR_CR6
opt_set SERIAL_PORT -1
opt_set SERIAL_PORT_2 2
opt_set TEMP_SENSOR_BED 1
opt_set MOTHERBOARD BOARD_BTT_SKR_CR6 SERIAL_PORT -1 SERIAL_PORT_2 2 TEMP_SENSOR_BED 1
opt_enable CR10_STOCKDISPLAY \
NOZZLE_AS_PROBE Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN Z_SAFE_HOMING \
PROBE_ACTIVATION_SWITCH PROBE_TARE PROBE_TARE_ONLY_WHILE_INACTIVE \

3
buildroot/tests/STM32F401VE_STEVAL-tests
View File

@ -8,8 +8,7 @@ set -e
# Build examples
restore_configs
opt_set MOTHERBOARD BOARD_STEVAL_3DP001V1
opt_set SERIAL_PORT -1
opt_set MOTHERBOARD BOARD_STEVAL_3DP001V1 SERIAL_PORT -1
exec_test $1 $2 "STM32F401VE_STEVAL Default Config" "$3"
# cleanup

23
buildroot/tests/esp32-tests
View File

@ -10,30 +10,19 @@ set -e
# Build with the default configurations
#
restore_configs
opt_set MOTHERBOARD BOARD_ESPRESSIF_ESP32
opt_set MOTHERBOARD BOARD_ESPRESSIF_ESP32 TX_BUFFER_SIZE 64 \
WIFI_SSID '"ssid"' WIFI_PWD '"password"'
opt_enable WIFISUPPORT WEBSUPPORT GCODE_MACROS BAUD_RATE_GCODE M115_GEOMETRY_REPORT REPETIER_GCODE_M360
opt_add WIFI_SSID "\"ssid\""
opt_add WIFI_PWD "\"password\""
opt_set TX_BUFFER_SIZE 64
exec_test $1 $2 "ESP32 with WIFISUPPORT and WEBSUPPORT" "$3"
#
# Build with TMC drivers using hardware serial
#
restore_configs
opt_set MOTHERBOARD BOARD_ESPRESSIF_ESP32
opt_set X_DRIVER_TYPE TMC2209
opt_set Y_DRIVER_TYPE TMC2208
opt_set Z_DRIVER_TYPE TMC2209
opt_set E0_DRIVER_TYPE TMC2209
opt_set X_HARDWARE_SERIAL Serial1
opt_set Y_HARDWARE_SERIAL Serial1
opt_set Z_HARDWARE_SERIAL Serial1
opt_set E0_HARDWARE_SERIAL Serial1
opt_set X_SLAVE_ADDRESS 0
opt_set Y_SLAVE_ADDRESS 1
opt_set Z_SLAVE_ADDRESS 2
opt_set E0_SLAVE_ADDRESS 3
opt_set MOTHERBOARD BOARD_ESPRESSIF_ESP32 \
X_DRIVER_TYPE TMC2209 Y_DRIVER_TYPE TMC2208 Z_DRIVER_TYPE TMC2209 E0_DRIVER_TYPE TMC2209 \
X_HARDWARE_SERIAL Serial1 Y_HARDWARE_SERIAL Serial1 Z_HARDWARE_SERIAL Serial1 E0_HARDWARE_SERIAL Serial1 \
X_SLAVE_ADDRESS 0 Y_SLAVE_ADDRESS 1 Z_SLAVE_ADDRESS 2 E0_SLAVE_ADDRESS 3
opt_enable HOTEND_IDLE_TIMEOUT SOFTWARE_DRIVER_ENABLE
exec_test $1 $2 "ESP32, TMC HW Serial, Hotend Idle" "$3"

3
buildroot/tests/linux_native-tests
View File

@ -10,8 +10,7 @@ set -e
# Build with the default configurations
#
restore_configs
opt_set MOTHERBOARD BOARD_LINUX_RAMPS
opt_set TEMP_SENSOR_BED 1
opt_set MOTHERBOARD BOARD_LINUX_RAMPS TEMP_SENSOR_BED 1
opt_enable PIDTEMPBED EEPROM_SETTINGS BAUD_RATE_GCODE
exec_test $1 $2 "Linux with EEPROM" "$3"

16
buildroot/tests/mega1280-tests
View File

@ -16,29 +16,25 @@ set -e
# Test MESH_BED_LEVELING feature, with LCD
#
restore_configs
opt_set LCD_LANGUAGE an
opt_set LCD_LANGUAGE an \
POWER_MONITOR_CURRENT_PIN 14 POWER_MONITOR_VOLTAGE_PIN 15 \
CLOSED_LOOP_ENABLE_PIN 44 CLOSED_LOOP_MOVE_COMPLETE_PIN 45
opt_enable SPINDLE_FEATURE ULTIMAKERCONTROLLER LCD_BED_LEVELING \
EEPROM_SETTINGS EEPROM_BOOT_SILENT EEPROM_AUTO_INIT \
SENSORLESS_BACKOFF_MM HOMING_BACKOFF_POST_MM HOME_Y_BEFORE_X CODEPENDENT_XY_HOMING \
MESH_BED_LEVELING ENABLE_LEVELING_FADE_HEIGHT MESH_G28_REST_ORIGIN \
G26_MESH_VALIDATION MESH_EDIT_MENU GCODE_QUOTED_STRINGS \
EXTERNAL_CLOSED_LOOP_CONTROLLER POWER_MONITOR_CURRENT POWER_MONITOR_VOLTAGE
opt_set POWER_MONITOR_CURRENT_PIN 14
opt_set POWER_MONITOR_VOLTAGE_PIN 15
opt_set CLOSED_LOOP_ENABLE_PIN 44
opt_set CLOSED_LOOP_MOVE_COMPLETE_PIN 45
exec_test $1 $2 "Spindle, MESH_BED_LEVELING, closed loop, Power Monitor, and LCD" "$3"
#
# Test DUAL_X_CARRIAGE
#
restore_configs
opt_set MOTHERBOARD BOARD_ZRIB_V52
opt_set LCD_LANGUAGE pt
opt_set EXTRUDERS 2
opt_set TEMP_SENSOR_1 1
opt_set MOTHERBOARD BOARD_ZRIB_V52 \
LCD_LANGUAGE pt REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 \
EXTRUDERS 2 TEMP_SENSOR_1 1
opt_enable USE_XMAX_PLUG DUAL_X_CARRIAGE REPRAPWORLD_KEYPAD
opt_set REPRAPWORLD_KEYPAD_MOVE_STEP 10.0
exec_test $1 $2 "ZRIB_V52 | DUAL_X_CARRIAGE" "$3"
#

77
buildroot/tests/mega2560-tests
View File

@ -16,17 +16,10 @@ set -e
# Test a probeless build of AUTO_BED_LEVELING_UBL, with lots of extruders
#
use_example_configs AnimationExample
opt_set SHOW_CUSTOM_BOOTSCREEN
opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO
opt_set LCD_LANGUAGE fr
opt_set EXTRUDERS 5
opt_set TEMP_SENSOR_1 1
opt_set TEMP_SENSOR_2 5
opt_set TEMP_SENSOR_3 20
opt_set TEMP_SENSOR_4 1000
opt_set TEMP_SENSOR_BED 1
opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO LCD_LANGUAGE fr \
EXTRUDERS 5 TEMP_SENSOR_1 1 TEMP_SENSOR_2 5 TEMP_SENSOR_3 20 TEMP_SENSOR_4 1000 TEMP_SENSOR_BED 1
opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 DEBUG_LEVELING_FEATURE G26_MESH_VALIDATION ENABLE_LEVELING_FADE_HEIGHT SKEW_CORRECTION \
REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER LIGHTWEIGHT_UI STATUS_MESSAGE_SCROLLING BOOT_MARLIN_LOGO_SMALL \
REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER LIGHTWEIGHT_UI STATUS_MESSAGE_SCROLLING SHOW_CUSTOM_BOOTSCREEN BOOT_MARLIN_LOGO_SMALL \
SDSUPPORT SDCARD_SORT_ALPHA USB_FLASH_DRIVE_SUPPORT AUTO_REPORT_SD_STATUS SCROLL_LONG_FILENAMES CANCEL_OBJECTS SOUND_MENU_ITEM \
EEPROM_SETTINGS EEPROM_CHITCHAT GCODE_MACROS CUSTOM_USER_MENUS \
MULTI_NOZZLE_DUPLICATION CLASSIC_JERK LIN_ADVANCE EXTRA_LIN_ADVANCE_K QUICK_HOME \
@ -38,26 +31,18 @@ exec_test $1 $2 "Azteeg X3 Pro | EXTRUDERS 5 | RRDFGSC | UBL | LIN_ADVANCE ..."
# Add a Sled Z Probe, use UBL Cartesian moves, use Japanese language
#
use_example_configs AnimationExample
opt_set SHOW_CUSTOM_BOOTSCREEN
opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO
opt_set LCD_LANGUAGE fr
opt_set EXTRUDERS 5
opt_set TEMP_SENSOR_1 1
opt_set TEMP_SENSOR_2 5
opt_set TEMP_SENSOR_3 20
opt_set TEMP_SENSOR_4 1000
opt_set TEMP_SENSOR_BED 1
opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 DEBUG_LEVELING_FEATURE G26_MESH_VALIDATION ENABLE_LEVELING_FADE_HEIGHT SKEW_CORRECTION \
REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER LIGHTWEIGHT_UI STATUS_MESSAGE_SCROLLING BOOT_MARLIN_LOGO_SMALL \
SDSUPPORT SDCARD_SORT_ALPHA USB_FLASH_DRIVE_SUPPORT SCROLL_LONG_FILENAMES CANCEL_OBJECTS NO_SD_AUTOSTART \
opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO LCD_LANGUAGE jp_kana \
EXTRUDERS 5 TEMP_SENSOR_1 1 TEMP_SENSOR_2 5 TEMP_SENSOR_3 20 TEMP_SENSOR_4 1000 TEMP_SENSOR_BED 1
opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER LIGHTWEIGHT_UI SHOW_CUSTOM_BOOTSCREEN BOOT_MARLIN_LOGO_SMALL \
LCD_SET_PROGRESS_MANUALLY PRINT_PROGRESS_SHOW_DECIMALS SHOW_REMAINING_TIME STATUS_MESSAGE_SCROLLING SCROLL_LONG_FILENAMES \
SDSUPPORT SDCARD_SORT_ALPHA NO_SD_AUTOSTART USB_FLASH_DRIVE_SUPPORT CANCEL_OBJECTS \
Z_PROBE_SLED AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 DEBUG_LEVELING_FEATURE G26_MESH_VALIDATION ENABLE_LEVELING_FADE_HEIGHT \
EEPROM_SETTINGS EEPROM_CHITCHAT GCODE_MACROS CUSTOM_USER_MENUS \
MULTI_NOZZLE_DUPLICATION CLASSIC_JERK LIN_ADVANCE QUICK_HOME \
LCD_SET_PROGRESS_MANUALLY PRINT_PROGRESS_SHOW_DECIMALS SHOW_REMAINING_TIME \
BABYSTEPPING BABYSTEP_XY NANODLP_Z_SYNC I2C_POSITION_ENCODERS M114_DETAIL \
Z_PROBE_SLED SKEW_CORRECTION SKEW_CORRECTION_FOR_Z SKEW_CORRECTION_GCODE
opt_set LCD_LANGUAGE jp_kana
NANODLP_Z_SYNC I2C_POSITION_ENCODERS M114_DETAIL \
SKEW_CORRECTION SKEW_CORRECTION_FOR_Z SKEW_CORRECTION_GCODE \
BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET DOUBLECLICK_FOR_Z_BABYSTEPPING BABYSTEP_HOTEND_Z_OFFSET BABYSTEP_DISPLAY_TOTAL
opt_disable SEGMENT_LEVELED_MOVES
opt_enable BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET DOUBLECLICK_FOR_Z_BABYSTEPPING BABYSTEP_HOTEND_Z_OFFSET BABYSTEP_DISPLAY_TOTAL M114_DETAIL
exec_test $1 $2 "Azteeg X3 Pro | EXTRUDERS 5 | RRDFGSC | UBL | LIN_ADVANCE | Sled Probe | Skew | JP-Kana | Babystep offsets ..." "$3"
@ -65,25 +50,16 @@ exec_test $1 $2 "Azteeg X3 Pro | EXTRUDERS 5 | RRDFGSC | UBL | LIN_ADVANCE | Sle
# 5 runout sensors with distinct states
#
restore_configs
opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO
opt_set EXTRUDERS 5
opt_set NUM_SERVOS 1
opt_set TEMP_SENSOR_1 1
opt_set TEMP_SENSOR_2 1
opt_set TEMP_SENSOR_3 1
opt_set TEMP_SENSOR_4 1
opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO NUM_SERVOS 1 \
EXTRUDERS 5 TEMP_SENSOR_1 1 TEMP_SENSOR_2 1 TEMP_SENSOR_3 1 TEMP_SENSOR_4 1 \
NUM_RUNOUT_SENSORS 5 FIL_RUNOUT2_PIN 44 FIL_RUNOUT3_PIN 45 FIL_RUNOUT4_PIN 46 FIL_RUNOUT5_PIN 47 \
FIL_RUNOUT3_STATE HIGH
opt_enable VIKI2 BOOT_MARLIN_LOGO_ANIMATED SDSUPPORT AUTO_REPORT_SD_STATUS \
Z_PROBE_SERVO_NR Z_SERVO_ANGLES DEACTIVATE_SERVOS_AFTER_MOVE AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE \
EEPROM_SETTINGS EEPROM_CHITCHAT M114_DETAIL \
NO_VOLUMETRICS EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES AUTOTEMP G38_PROBE_TARGET JOYSTICK \
DIRECT_STEPPING DETECT_BROKEN_ENDSTOP \
FILAMENT_RUNOUT_SENSOR NOZZLE_PARK_FEATURE ADVANCED_PAUSE_FEATURE Z_SAFE_HOMING FIL_RUNOUT3_PULLUP
opt_set NUM_RUNOUT_SENSORS 5
opt_set FIL_RUNOUT2_PIN 44
opt_set FIL_RUNOUT3_PIN 45
opt_set FIL_RUNOUT3_STATE HIGH
opt_set FIL_RUNOUT4_PIN 46
opt_set FIL_RUNOUT5_PIN 47
exec_test $1 $2 "Multiple runout sensors (x5) | Distinct runout states" "$3"
@ -91,27 +67,19 @@ exec_test $1 $2 "Multiple runout sensors (x5) | Distinct runout states" "$3"
# Mixing Extruder with 5 steppers, Greek
#
restore_configs
opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO
opt_set LCD_LANGUAGE el_gr
opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO MIXING_STEPPERS 5 LCD_LANGUAGE ru \
NUM_RUNOUT_SENSORS E_STEPPERS FIL_RUNOUT2_PIN 16 FIL_RUNOUT3_PIN 17 FIL_RUNOUT4_PIN 4 FIL_RUNOUT5_PIN 5
opt_enable MIXING_EXTRUDER GRADIENT_MIX GRADIENT_VTOOL CR10_STOCKDISPLAY \
USE_CONTROLLER_FAN CONTROLLER_FAN_EDITABLE CONTROLLER_FAN_IGNORE_Z \
FILAMENT_RUNOUT_SENSOR ADVANCED_PAUSE_FEATURE NOZZLE_PARK_FEATURE
opt_set MIXING_STEPPERS 5
opt_set NUM_RUNOUT_SENSORS E_STEPPERS
opt_set FIL_RUNOUT2_PIN 16
opt_set FIL_RUNOUT3_PIN 17
opt_set FIL_RUNOUT4_PIN 4
opt_set FIL_RUNOUT5_PIN 5
opt_set LCD_LANGUAGE ru
exec_test $1 $2 "Azteeg X3 | Mixing Extruder (x5) | Gradient Mix | Greek" "$3"
#
# Test SPEAKER with BOARD_BQ_ZUM_MEGA_3D and BQ_LCD_SMART_CONTROLLER
#
#restore_configs
#opt_set MOTHERBOARD BOARD_BQ_ZUM_MEGA_3D
#opt_set LCD_FEEDBACK_FREQUENCY_DURATION_MS 10
#opt_set LCD_FEEDBACK_FREQUENCY_HZ 100
#opt_set MOTHERBOARD BOARD_BQ_ZUM_MEGA_3D \
# LCD_FEEDBACK_FREQUENCY_DURATION_MS 10 LCD_FEEDBACK_FREQUENCY_HZ 100
#opt_enable BQ_LCD_SMART_CONTROLLER SPEAKER
#
@ -153,10 +121,7 @@ exec_test $1 $2 "Azteeg X3 | Mixing Extruder (x5) | Gradient Mix | Greek" "$3"
#
#restore_configs
#opt_enable G3D_PANEL SDSUPPORT SDCARD_SORT_ALPHA STATUS_MESSAGE_SCROLLING SCROLL_LONG_FILENAMES
#opt_set SDSORT_GCODE true
#opt_set SDSORT_USES_RAM true
#opt_set SDSORT_USES_STACK true
#opt_set SDSORT_CACHE_NAMES true
#opt_set SDSORT_GCODE true SDSORT_USES_RAM true SDSORT_USES_STACK true SDSORT_CACHE_NAMES true
#exec_test $1 $2 "Stuff" "$3"
#
# REPRAPWORLD_KEYPAD

6
buildroot/tests/mks_robin_lite-tests
View File

@ -7,10 +7,8 @@
set -e
restore_configs
opt_set MOTHERBOARD BOARD_MKS_ROBIN_LITE
opt_set SERIAL_PORT 1
opt_enable EEPROM_SETTINGS
opt_enable SDSUPPORT
opt_set MOTHERBOARD BOARD_MKS_ROBIN_LITE SERIAL_PORT 1
opt_enable EEPROM_SETTINGS SDSUPPORT
exec_test $1 $2 "Default Configuration with Fallback SD EEPROM" "$3"
# cleanup

4
buildroot/tests/mks_robin_mini-tests
View File

@ -8,9 +8,7 @@
set -e
use_example_configs Mks/Robin
opt_set MOTHERBOARD BOARD_MKS_ROBIN_MINI
opt_set EXTRUDERS 1
opt_set TEMP_SENSOR_1 0
opt_set MOTHERBOARD BOARD_MKS_ROBIN_MINI EXTRUDERS 1 TEMP_SENSOR_1 0
exec_test $1 $2 "MKS Robin mini" "$3"
# cleanup

4
buildroot/tests/mks_robin_nano35-tests
View File

@ -49,11 +49,9 @@ exec_test $1 $2 "MKS Robin v2 nano New Color UI 480x320 SPI" "$3"
# (Robin v2 nano has no FSMC interface)
#
use_example_configs Mks/Robin
opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2
opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2 X_DRIVER_TYPE TMC2209 Y_DRIVER_TYPE TMC2209
opt_disable TFT_INTERFACE_FSMC TFT_COLOR_UI TOUCH_SCREEN TFT_RES_320x240
opt_enable TFT_INTERFACE_SPI TFT_LVGL_UI TFT_RES_480x320
opt_set X_DRIVER_TYPE TMC2209
opt_set Y_DRIVER_TYPE TMC2209
exec_test $1 $2 "MKS Robin v2 nano LVGL SPI + TMC" "$3"
#

4
buildroot/tests/mks_robin_nano35_stm32-tests
View File

@ -58,11 +58,9 @@ exec_test $1 $2 "MKS Robin v2 nano New Color UI 480x320 SPI" "$3"
# (Robin v2 nano has no FSMC interface)
#
# use_example_configs Mks/Robin
# opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2
# opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2 X_DRIVER_TYPE TMC2209 Y_DRIVER_TYPE TMC2209
# opt_disable TFT_INTERFACE_FSMC TFT_COLOR_UI TOUCH_SCREEN TFT_RES_320x240
# opt_enable TFT_INTERFACE_SPI TFT_LVGL_UI TFT_RES_480x320
# opt_set X_DRIVER_TYPE TMC2209
# opt_set Y_DRIVER_TYPE TMC2209
# exec_test $1 $2 "MKS Robin v2 nano LVGL SPI + TMC" "$3"
# cleanup

12
buildroot/tests/mks_robin_pro-tests
View File

@ -8,13 +8,11 @@ set -e
use_example_configs Mks/Robin_Pro
opt_enable EMERGENCY_PARSER
opt_set SERIAL_PORT 3
opt_disable SERIAL_PORT_2
opt_set SDCARD_CONNECTION LCD
opt_set X_DRIVER_TYPE TMC2209
opt_set Y_DRIVER_TYPE TMC2130
opt_set TEMP_SENSOR_BED 1
opt_disable THERMAL_PROTECTION_HOTENDS
opt_set SERIAL_PORT 3 \
SDCARD_CONNECTION LCD \
X_DRIVER_TYPE TMC2209 Y_DRIVER_TYPE TMC2130 \
TEMP_SENSOR_BED 1
opt_disable SERIAL_PORT_2 THERMAL_PROTECTION_HOTENDS
exec_test $1 $2 "MKS Robin Pro, TMC Drivers, no thermal protection" "$3"
# cleanup

71
buildroot/tests/rambo-tests
View File

@ -10,22 +10,14 @@ set -e
# Lots of options - Formerly the first Mega2560 test
#
restore_configs
opt_set MOTHERBOARD BOARD_RAMBO
opt_set EXTRUDERS 2
opt_set TEMP_SENSOR_0 -2
opt_set TEMP_SENSOR_1 1
opt_set TEMP_SENSOR_BED 2
opt_set TEMP_SENSOR_PROBE 1
opt_add TEMP_PROBE_PIN 12
opt_set TEMP_SENSOR_CHAMBER 3
opt_add TEMP_CHAMBER_PIN 3
opt_add HEATER_CHAMBER_PIN 45
opt_set GRID_MAX_POINTS_X 16
opt_set FANMUX0_PIN 53
opt_set Z_HOME_DIR 1
opt_enable USE_ZMAX_PLUG
opt_set MOTHERBOARD BOARD_RAMBO \
EXTRUDERS 2 TEMP_SENSOR_0 -2 TEMP_SENSOR_1 1 TEMP_SENSOR_BED 2 \
TEMP_SENSOR_PROBE 1 TEMP_PROBE_PIN 12 \
TEMP_SENSOR_CHAMBER 3 TEMP_CHAMBER_PIN 3 HEATER_CHAMBER_PIN 45 \
Z_HOME_DIR 1 GRID_MAX_POINTS_X 16 \
FANMUX0_PIN 53
opt_disable USE_ZMIN_PLUG Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN USE_WATCHDOG
opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER LCD_PROGRESS_BAR LCD_PROGRESS_BAR_TEST \
opt_enable USE_ZMAX_PLUG REPRAP_DISCOUNT_SMART_CONTROLLER LCD_PROGRESS_BAR LCD_PROGRESS_BAR_TEST \
FIX_MOUNTED_PROBE CODEPENDENT_XY_HOMING PIDTEMPBED PROBE_TEMP_COMPENSATION \
PREHEAT_BEFORE_PROBING PROBING_HEATERS_OFF PROBING_FANS_OFF PROBING_STEPPERS_OFF WAIT_FOR_BED_HEATER \
EEPROM_SETTINGS SDSUPPORT SD_REPRINT_LAST_SELECTED_FILE BINARY_FILE_TRANSFER \
@ -50,12 +42,10 @@ exec_test $1 $2 "RAMBO | EXTRUDERS 2 | CHAR LCD + SD | FIX Probe | ABL-Linear |
# Full size Rambo Dual Endstop CNC
#
restore_configs
opt_set MOTHERBOARD BOARD_RAMBO
opt_set EXTRUDERS 0
opt_set TEMP_SENSOR_0 999
opt_set DUMMY_THERMISTOR_999_VALUE 170
opt_set DIGIPOT_MOTOR_CURRENT '{ 120, 120, 120, 120, 120 }'
opt_set LEVEL_CORNERS_LEVELING_ORDER '{ LF, RF }'
opt_set MOTHERBOARD BOARD_RAMBO \
EXTRUDERS 0 TEMP_SENSOR_0 999 DUMMY_THERMISTOR_999_VALUE 170 \
DIGIPOT_MOTOR_CURRENT '{ 120, 120, 120, 120, 120 }' \
LEVEL_CORNERS_LEVELING_ORDER '{ LF, RF }'
opt_enable USE_XMAX_PLUG USE_YMAX_PLUG USE_ZMAX_PLUG \
REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER REVERSE_ENCODER_DIRECTION SDSUPPORT EEPROM_SETTINGS \
S_CURVE_ACCELERATION X_DUAL_STEPPER_DRIVERS X_DUAL_ENDSTOPS Y_DUAL_STEPPER_DRIVERS Y_DUAL_ENDSTOPS \
@ -68,9 +58,7 @@ exec_test $1 $2 "Rambo CNC Configuration" "$3"
# Rambo heated bed only
#
restore_configs
opt_set MOTHERBOARD BOARD_RAMBO
opt_set EXTRUDERS 0
opt_set TEMP_SENSOR_BED 1
opt_set MOTHERBOARD BOARD_RAMBO EXTRUDERS 0 TEMP_SENSOR_BED 1
opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
exec_test $1 $2 "Rambo heated bed only" "$3"
@ -78,18 +66,18 @@ exec_test $1 $2 "Rambo heated bed only" "$3"
# Build with the default configurations
#
restore_configs
opt_set MOTHERBOARD BOARD_EINSY_RAMBO
opt_set X_DRIVER_TYPE TMC2130
opt_set Y_DRIVER_TYPE TMC2130
opt_set Z_DRIVER_TYPE TMC2130
opt_set E0_DRIVER_TYPE TMC2130
opt_set MOTHERBOARD BOARD_EINSY_RAMBO \
X_DRIVER_TYPE TMC2130 Y_DRIVER_TYPE TMC2130 Z_DRIVER_TYPE TMC2130 E0_DRIVER_TYPE TMC2130
exec_test $1 $2 "Einsy RAMBo with TMC2130" "$3"
#
# Test MINIRAMBO with PWM_MOTOR_CURRENT and many features
#
restore_configs
opt_set MOTHERBOARD BOARD_MINIRAMBO
opt_set MOTHERBOARD BOARD_MINIRAMBO \
CONTROLLERFAN_SPEED_IDLE 128 \
PWM_MOTOR_CURRENT '{ 1300, 1300, 1250 }' \
I2C_SLAVE_ADDRESS 63
opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER \
SDSUPPORT PCA9632 SOUND_MENU_ITEM GCODE_REPEAT_MARKERS \
AUTO_BED_LEVELING_BILINEAR PROBE_MANUALLY LCD_BED_LEVELING G26_MESH_VALIDATION MESH_EDIT_MENU \
@ -98,23 +86,23 @@ opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CO
NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE \
ADVANCED_PAUSE_FEATURE PARK_HEAD_ON_PAUSE ADVANCED_PAUSE_CONTINUOUS_PURGE FILAMENT_LOAD_UNLOAD_GCODES \
PRINTCOUNTER SERVICE_NAME_1 SERVICE_INTERVAL_1 M114_DETAIL
opt_set CONTROLLERFAN_SPEED_IDLE 128
opt_add M100_FREE_MEMORY_DUMPER
opt_add M100_FREE_MEMORY_CORRUPTOR
opt_set PWM_MOTOR_CURRENT "{ 1300, 1300, 1250 }"
opt_set I2C_SLAVE_ADDRESS 63
exec_test $1 $2 "MINIRAMBO | RRDGFSC | M100 | PWM_MOTOR_CURRENT | PRINTCOUNTER | Advanced Pause ..." "$3"
#
# Test many less common options
#
restore_configs
opt_set MOTHERBOARD BOARD_RAMBO
opt_set TEMP_SENSOR_0 -2
opt_set DIGIPOT_I2C_NUM_CHANNELS 5
opt_set LCD_LANGUAGE it
opt_set MIXING_STEPPERS 2
opt_set SERVO_DELAY "{ 300, 300, 300 }"
opt_set MOTHERBOARD BOARD_RAMBO \
TEMP_SENSOR_0 -2 \
DIGIPOT_I2C_NUM_CHANNELS 5 \
LCD_LANGUAGE it \
MIXING_STEPPERS 2 \
SERVO_DELAY '{ 300, 300, 300 }' \
CONTROLLER_FAN_PIN X_MAX_PIN FILWIDTH_PIN 5 \
FAN_MIN_PWM 50 FAN_KICKSTART_TIME 100 \
XY_FREQUENCY_LIMIT 15
opt_enable COREYX USE_XMAX_PLUG MIXING_EXTRUDER GRADIENT_MIX \
BABYSTEPPING BABYSTEP_DISPLAY_TOTAL FILAMENT_LCD_DISPLAY \
REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER MENU_ADDAUTOSTART SDSUPPORT SDCARD_SORT_ALPHA \
@ -124,11 +112,6 @@ opt_enable COREYX USE_XMAX_PLUG MIXING_EXTRUDER GRADIENT_MIX \
SD_ABORT_ON_ENDSTOP_HIT HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT ADVANCED_OK M114_DETAIL \
VOLUMETRIC_DEFAULT_ON NO_WORKSPACE_OFFSETS EXTRA_FAN_SPEED FWRETRACT \
USE_CONTROLLER_FAN CONTROLLER_FAN_EDITABLE CONTROLLER_FAN_USE_Z_ONLY
opt_set CONTROLLER_FAN_PIN X_MAX_PIN
opt_set FAN_MIN_PWM 50
opt_set FAN_KICKSTART_TIME 100
opt_set XY_FREQUENCY_LIMIT 15
opt_add FILWIDTH_PIN 5
exec_test $1 $2 "Rambo | CoreXY, Gradient Mix | Endstop Int. | Home Y > X | FW Retract ..." "$3"
# clean up

18
buildroot/tests/rumba32-tests
View File

@ -8,31 +8,23 @@ set -e
# Build examples
restore_configs
opt_set MOTHERBOARD BOARD_RUMBA32_V1_0
opt_set SERIAL_PORT -1
opt_set MOTHERBOARD BOARD_RUMBA32_V1_0 SERIAL_PORT -1 \
TEMP_SENSOR_BED 1 X_DRIVER_TYPE TMC2130
opt_disable PIDTEMP
opt_enable PIDTEMPBED
opt_set TEMP_SENSOR_BED 1
opt_disable THERMAL_PROTECTION_BED
opt_set X_DRIVER_TYPE TMC2130
exec_test $1 $2 "RUMBA32 V1.0 with TMC2130, PID Bed, and bed thermal protection disabled" "$3"
# Build examples
restore_configs
opt_set MOTHERBOARD BOARD_RUMBA32_V1_1
opt_set SERIAL_PORT -1
opt_set MOTHERBOARD BOARD_RUMBA32_V1_1 SERIAL_PORT -1 \
TEMP_SENSOR_BED 1 X_DRIVER_TYPE TMC2130 Y_DRIVER_TYPE TMC2208
opt_enable PIDTEMPBED EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
opt_set TEMP_SENSOR_BED 1
opt_set X_DRIVER_TYPE TMC2130
opt_set Y_DRIVER_TYPE TMC2208
exec_test $1 $2 "RUMBA32 V1.1 with TMC2130, TMC2208, PID Bed, EEPROM settings, and graphic LCD controller" "$3"
# Build examples
restore_configs
opt_set MOTHERBOARD BOARD_RUMBA32_MKS
opt_set SERIAL_PORT -1
opt_set X_DRIVER_TYPE TMC2130
opt_set Y_DRIVER_TYPE TMC2208
opt_set MOTHERBOARD BOARD_RUMBA32_MKS SERIAL_PORT -1 X_DRIVER_TYPE TMC2130 Y_DRIVER_TYPE TMC2208
exec_test $1 $2 "RUMBA32 MKS Default Config with Mixed TMC Drivers" "$3"
# cleanup

6
buildroot/tests/sanguino1284p-tests
View File

@ -10,10 +10,10 @@ set -e
# Start with default configurations...
#
restore_configs
opt_set MOTHERBOARD BOARD_SANGUINOLOLU_12
opt_set LCD_LANGUAGE de
opt_set MOTHERBOARD BOARD_SANGUINOLOLU_12 \
LCD_LANGUAGE de \
CONTROLLER_FAN_PIN 27
opt_enable MINIPANEL USE_CONTROLLER_FAN CONTROLLER_FAN_EDITABLE
opt_set CONTROLLER_FAN_PIN 27
exec_test $1 $2 "Default Configuration | MINIPANAL | CONTROLLER_FAN" "$3"
#

9
buildroot/tests/teensy31-tests
View File

@ -22,9 +22,10 @@ exec_test $1 $2 "Teensy3.1 with Zero Endstops" "$3"
# Test many features together
#
restore_configs
opt_set MOTHERBOARD BOARD_TEENSY31_32
opt_set TEMP_SENSOR_0 1
opt_set TEMP_SENSOR_BED 1
opt_set MOTHERBOARD BOARD_TEENSY31_32 \
TEMP_SENSOR_0 1 TEMP_SENSOR_BED 1 \
I2C_SLAVE_ADDRESS 63 \
GRID_MAX_POINTS_X 16
opt_enable EEPROM_SETTINGS FILAMENT_WIDTH_SENSOR CALIBRATION_GCODE BAUD_RATE_GCODE \
FIX_MOUNTED_PROBE Z_SAFE_HOMING AUTO_BED_LEVELING_BILINEAR DEBUG_LEVELING_FEATURE Z_MIN_PROBE_REPEATABILITY_TEST \
BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET PRINTCOUNTER SLOW_PWM_HEATERS PIDTEMPBED \
@ -33,6 +34,4 @@ opt_enable EEPROM_SETTINGS FILAMENT_WIDTH_SENSOR CALIBRATION_GCODE BAUD_RATE_GCO
ARC_SUPPORT BEZIER_CURVE_SUPPORT EXPERIMENTAL_I2CBUS EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES \
PHOTO_GCODE PHOTO_POSITION PHOTO_SWITCH_POSITION PHOTO_SWITCH_MS PHOTO_DELAY_MS PHOTO_RETRACT_MM \
HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT
opt_set I2C_SLAVE_ADDRESS 63
opt_set GRID_MAX_POINTS_X 16
exec_test $1 $2 "Teensy3.1 with many features" "$3"

45
buildroot/tests/teensy35-tests
View File

@ -14,11 +14,10 @@ exec_test $1 $2 "Teensy3.5 with default config" "$3"
# Test as many features together as possible
#
restore_configs
opt_set MOTHERBOARD BOARD_TEENSY35_36
opt_set EXTRUDERS 2
opt_set TEMP_SENSOR_0 1
opt_set TEMP_SENSOR_1 5
opt_set TEMP_SENSOR_BED 1
opt_set MOTHERBOARD BOARD_TEENSY35_36 \
EXTRUDERS 2 TEMP_SENSOR_0 1 TEMP_SENSOR_1 5 TEMP_SENSOR_BED 1 \
I2C_SLAVE_ADDRESS 63 \
GRID_MAX_POINTS_X 16
opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER LCD_INFO_MENU SDSUPPORT SDCARD_SORT_ALPHA \
FILAMENT_WIDTH_SENSOR FILAMENT_LCD_DISPLAY CALIBRATION_GCODE BAUD_RATE_GCODE SOUND_MENU_ITEM \
FIX_MOUNTED_PROBE Z_SAFE_HOMING AUTO_BED_LEVELING_BILINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \
@ -27,8 +26,6 @@ opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER LCD_INFO_MENU SDSUPPORT
ADVANCED_PAUSE_FEATURE ARC_SUPPORT BEZIER_CURVE_SUPPORT EXPERIMENTAL_I2CBUS EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES PARK_HEAD_ON_PAUSE \
PHOTO_GCODE PHOTO_POSITION PHOTO_SWITCH_POSITION PHOTO_SWITCH_MS PHOTO_DELAY_MS PHOTO_RETRACT_MM \
HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT
opt_set I2C_SLAVE_ADDRESS 63
opt_set GRID_MAX_POINTS_X 16
exec_test $1 $2 "Teensy3.5 with many features" "$3"
#
@ -43,10 +40,9 @@ exec_test $1 $2 "Sled Z Probe with Linear leveling" "$3"
# Test a Servo Probe
#
# restore_configs
# opt_set MOTHERBOARD BOARD_TEENSY35_36
# opt_set MOTHERBOARD BOARD_TEENSY35_36 NUM_SERVOS 1
# opt_enable Z_PROBE_SERVO_NR Z_SERVO_ANGLES DEACTIVATE_SERVOS_AFTER_MOVE \
# AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE EEPROM_SETTINGS
# opt_set NUM_SERVOS 1
# exec_test $1 $2 "Servo Probe"
#
# ...with AUTO_BED_LEVELING_3POINT, DEBUG_LEVELING_FEATURE, EEPROM_SETTINGS, EEPROM_CHITCHAT, EXTENDED_CAPABILITIES_REPORT, and AUTO_REPORT_TEMPERATURES
@ -59,28 +55,23 @@ exec_test $1 $2 "Sled Z Probe with Linear leveling" "$3"
# Test MAGNETIC_PARKING_EXTRUDER with LCD
#
restore_configs
opt_set MOTHERBOARD BOARD_TEENSY35_36
opt_set EXTRUDERS 2
opt_set TEMP_SENSOR_1 1
opt_enable MAGNETIC_PARKING_EXTRUDER ULTIMAKERCONTROLLER
opt_set MOTHERBOARD BOARD_TEENSY35_36 EXTRUDERS 2 TEMP_SENSOR_1 1 SOL0_PIN 29
opt_enable PARKING_EXTRUDER ULTIMAKERCONTROLLER
exec_test $1 $2 "MAGNETIC_PARKING_EXTRUDER with LCD" "$3"
#
# Mixing Extruder
#
restore_configs
opt_set MOTHERBOARD BOARD_TEENSY35_36
opt_set MOTHERBOARD BOARD_TEENSY35_36 MIXING_STEPPERS 2
opt_enable MIXING_EXTRUDER DIRECT_MIXING_IN_G1 GRADIENT_MIX GRADIENT_VTOOL REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
opt_set MIXING_STEPPERS 2
exec_test $1 $2 "Mixing Extruder" "$3"
#
# Test SWITCHING_EXTRUDER
#
# restore_configs
# opt_set MOTHERBOARD BOARD_TEENSY35_36
# opt_set EXTRUDERS 2
# opt_set NUM_SERVOS 1
# opt_set MOTHERBOARD BOARD_TEENSY35_36 EXTRUDERS 2 NUM_SERVOS 1
# opt_enable SWITCHING_EXTRUDER ULTIMAKERCONTROLLER
# exec_test $1 $2 "SWITCHING_EXTRUDER"
@ -88,15 +79,11 @@ exec_test $1 $2 "Mixing Extruder" "$3"
# Enable COREXY
#
restore_configs
opt_set MOTHERBOARD BOARD_TEENSY35_36
opt_enable COREXY
opt_set X_DRIVER_TYPE TMC5160
opt_set Y_DRIVER_TYPE TMC5160
opt_set X_MIN_ENDSTOP_INVERTING true
opt_set Y_MIN_ENDSTOP_INVERTING true
opt_add X_CS_PIN 46
opt_add Y_CS_PIN 47
opt_enable USE_ZMIN_PLUG MONITOR_DRIVER_STATUS SENSORLESS_HOMING
opt_set MOTHERBOARD BOARD_TEENSY35_36 \
X_DRIVER_TYPE TMC5160 Y_DRIVER_TYPE TMC5160 \
X_MIN_ENDSTOP_INVERTING true Y_MIN_ENDSTOP_INVERTING true \
X_CS_PIN 46 Y_CS_PIN 47
opt_enable COREXY USE_ZMIN_PLUG MONITOR_DRIVER_STATUS SENSORLESS_HOMING
exec_test $1 $2 "Teensy 3.5/3.6 COREXY" "$3"
#
@ -111,11 +98,9 @@ exec_test $1 $2 "Teensy 3.5/3.6 COREXZ" "$3"
# Enable Dual Z with Dual Z endstops
#
restore_configs
opt_set MOTHERBOARD BOARD_TEENSY35_36
opt_set NUM_Z_STEPPER_DRIVERS 2
opt_set MOTHERBOARD BOARD_TEENSY35_36 NUM_Z_STEPPER_DRIVERS 2 Z2_MAX_PIN 2
opt_enable Z_MULTI_ENDSTOPS USE_XMAX_PLUG
pins_set ramps/RAMPS X_MAX_PIN -1
opt_add Z2_MAX_PIN 2
exec_test $1 $2 "Dual Z with Dual Z endstops" "$3"
# Clean up

42
buildroot/tests/teensy41-tests
View File

@ -14,11 +14,10 @@ exec_test $1 $2 "Teensy4.1 with default config" "$3"
# Test as many features together as possible
#
restore_configs
opt_set MOTHERBOARD BOARD_TEENSY41
opt_set EXTRUDERS 2
opt_set TEMP_SENSOR_0 1
opt_set TEMP_SENSOR_1 5
opt_set TEMP_SENSOR_BED 1
opt_set MOTHERBOARD BOARD_TEENSY41 \
EXTRUDERS 2 TEMP_SENSOR_0 1 TEMP_SENSOR_1 5 TEMP_SENSOR_BED 1 \
I2C_SLAVE_ADDRESS 63 \
GRID_MAX_POINTS_X 16
opt_enable EXTENSIBLE_UI LCD_INFO_MENU SDSUPPORT SDCARD_SORT_ALPHA \
FILAMENT_LCD_DISPLAY CALIBRATION_GCODE BAUD_RATE_GCODE \
FIX_MOUNTED_PROBE Z_SAFE_HOMING AUTO_BED_LEVELING_BILINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \
@ -28,8 +27,6 @@ opt_enable EXTENSIBLE_UI LCD_INFO_MENU SDSUPPORT SDCARD_SORT_ALPHA \
PHOTO_GCODE PHOTO_POSITION PHOTO_SWITCH_POSITION PHOTO_SWITCH_MS PHOTO_DELAY_MS PHOTO_RETRACT_MM \
HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT
opt_add EXTUI_EXAMPLE
opt_set I2C_SLAVE_ADDRESS 63
opt_set GRID_MAX_POINTS_X 16
exec_test $1 $2 "Teensy4.1 with many features" "$3"
#
@ -60,10 +57,8 @@ exec_test $1 $2 "Sled Z Probe with Linear leveling" "$3"
# Test MAGNETIC_PARKING_EXTRUDER with no LCD
#
restore_configs
opt_set MOTHERBOARD BOARD_TEENSY41
opt_set EXTRUDERS 2
opt_set TEMP_SENSOR_1 1
opt_set SERIAL_PORT_2 -2
opt_set MOTHERBOARD BOARD_TEENSY41 SERIAL_PORT_2 -2 \
EXTRUDERS 2 TEMP_SENSOR_1 1
opt_enable EEPROM_SETTINGS MAGNETIC_PARKING_EXTRUDER
exec_test $1 $2 "Ethernet, EEPROM, Magnetic Parking Extruder, No LCD" "$3"
@ -71,18 +66,15 @@ exec_test $1 $2 "Ethernet, EEPROM, Magnetic Parking Extruder, No LCD" "$3"
# Mixing Extruder
#
restore_configs
opt_set MOTHERBOARD BOARD_TEENSY41
opt_set MOTHERBOARD BOARD_TEENSY41 MIXING_STEPPERS 2
opt_enable MIXING_EXTRUDER DIRECT_MIXING_IN_G1 GRADIENT_MIX GRADIENT_VTOOL
opt_set MIXING_STEPPERS 2
exec_test $1 $2 "Mixing Extruder" "$3"
#
# Test SWITCHING_EXTRUDER
#
# restore_configs
# opt_set MOTHERBOARD BOARD_TEENSY41
# opt_set EXTRUDERS 2
# opt_set NUM_SERVOS 1
# opt_set MOTHERBOARD BOARD_TEENSY41 EXTRUDERS 2 NUM_SERVOS 1
# opt_enable SWITCHING_EXTRUDER ULTIMAKERCONTROLLER
# exec_test $1 $2 "SWITCHING_EXTRUDER" "$3"
@ -90,15 +82,11 @@ exec_test $1 $2 "Mixing Extruder" "$3"
# Enable COREXY
#
restore_configs
opt_set MOTHERBOARD BOARD_TEENSY41
opt_enable COREXY
opt_set X_DRIVER_TYPE TMC5160
opt_set Y_DRIVER_TYPE TMC5160
opt_set X_MIN_ENDSTOP_INVERTING true
opt_set Y_MIN_ENDSTOP_INVERTING true
opt_add X_CS_PIN 46
opt_add Y_CS_PIN 47
opt_enable USE_ZMIN_PLUG MONITOR_DRIVER_STATUS SENSORLESS_HOMING
opt_set MOTHERBOARD BOARD_TEENSY41 \
X_DRIVER_TYPE TMC5160 Y_DRIVER_TYPE TMC5160 \
X_MIN_ENDSTOP_INVERTING true Y_MIN_ENDSTOP_INVERTING true \
X_CS_PIN 46 Y_CS_PIN 47
opt_enable COREXY USE_ZMIN_PLUG MONITOR_DRIVER_STATUS SENSORLESS_HOMING
exec_test $1 $2 "Teensy 4.0/4.1 COREXY" "$3"
#
@ -113,11 +101,9 @@ exec_test $1 $2 "Teensy 4.0/4.1 COREXZ" "$3"
# Enable Dual Z with Dual Z endstops
#
restore_configs
opt_set MOTHERBOARD BOARD_TEENSY41
opt_set MOTHERBOARD BOARD_TEENSY41 NUM_Z_STEPPER_DRIVERS 2 Z2_MAX_PIN 2
opt_enable Z_MULTI_ENDSTOPS USE_XMAX_PLUG
opt_set NUM_Z_STEPPER_DRIVERS 2
pins_set ramps/RAMPS X_MAX_PIN -1
opt_add Z2_MAX_PIN 2
exec_test $1 $2 "Dual Z with Dual Z endstops" "$3"
# Clean up

Write Preview
Loading…
Cancel
Save