BUZZ cleanup (#14760)

Marlin/src/feature/pause.cpp

@@ -54,7 +54,11 @@
 #endif
 
 #include "../lcd/ultralcd.h"
+
+#if HAS_BUZZER
   #include "../libs/buzzer.h"
+#endif
+
 #include "../libs/nozzle.h"
 #include "pause.h"
 

Marlin/src/lcd/menu/game/brickout.cpp

@@ -79,7 +79,7 @@ void BrickoutGame::game_screen() {
       }
       // Did the ball go below the bottom?
       else if (newy > BTOF(LCD_PIXEL_HEIGHT)) {
-        BUZZ(500, 75);
+        _BUZZ(500, 75);
         if (--bdat.balls_left) reset_ball(); else game_state = 0;
         break; // done
       }

Marlin/src/lcd/menu/game/game.h

@@ -28,7 +28,7 @@
 
 //#define MUTE_GAMES
 
-#ifdef MUTE_GAMES
+#if ENABLED(MUTE_GAMES) || !HAS_BUZZER
   #define _BUZZ(D,F) NOOP
 #else
   #define _BUZZ(D,F) BUZZ(D,F)

Marlin/src/lcd/menu/menu.cpp

@@ -31,7 +31,9 @@
 #include "../../module/printcounter.h"
 #include "../../gcode/queue.h"
 #include "../../sd/cardreader.h"
+#if HAS_BUZZER
   #include "../../libs/buzzer.h"
+#endif
 
 #if ENABLED(EEPROM_SETTINGS)
   #include "../../module/configuration_store.h"
@@ -346,6 +348,7 @@ void scroll_screen(const uint8_t limit, const bool is_menu) {
     encoderTopLine = encoderLine;
 }
 
+#if HAS_BUZZER
   void MarlinUI::completion_feedback(const bool good/*=true*/) {
     if (good) {
       BUZZ(100, 659);
@@ -353,6 +356,7 @@ void MarlinUI::completion_feedback(const bool good/*=true*/) {
     }
     else BUZZ(20, 440);
   }
+#endif
 
 #if HAS_LINE_TO_Z
 
@@ -433,8 +437,18 @@ void MarlinUI::completion_feedback(const bool good/*=true*/) {
 #endif
 
 #if ENABLED(EEPROM_SETTINGS)
-  void lcd_store_settings()   { ui.completion_feedback(settings.save()); }
-  void lcd_load_settings()    { ui.completion_feedback(settings.load()); }
+  void lcd_store_settings() {
+    const bool saved = settings.save();
+    #if HAS_BUZZER
+      ui.completion_feedback(saved);
+    #endif
+  }
+  void lcd_load_settings() {
+    const bool loaded = settings.load();
+    #if HAS_BUZZER
+      ui.completion_feedback(loaded);
+    #endif
+  }
 #endif
 
 void _lcd_draw_homing() {

Marlin/src/lcd/menu/menu_advanced.cpp

@@ -603,7 +603,12 @@ void menu_backlash();
     static void lcd_init_eeprom_confirm() {
       do_select_screen(
         PSTR(MSG_BUTTON_INIT), PSTR(MSG_BUTTON_CANCEL),
-        []{ ui.completion_feedback(settings.init_eeprom()); },
+        []{
+          const bool inited = settings.init_eeprom();
+          #if HAS_BUZZER
+            ui.completion_feedback(inited);
+          #endif
+        },
         ui.goto_previous_screen,
         PSTR(MSG_INIT_EEPROM), nullptr, PSTR("?")
       );
@@ -698,8 +703,11 @@ void menu_advanced_settings() {
       //
       // Toggle the SD Firmware Update state in EEPROM
       //
-      const bool new_state = !settings.sd_update_status();
-      ui.completion_feedback(settings.set_sd_update_status(new_state));
+      const bool new_state = !settings.sd_update_status(),
+                 didset = settings.set_sd_update_status(new_state);
+      #if HAS_BUZZER
+        ui.completion_feedback(didset);
+      #endif
       ui.return_to_status();
       if (new_state) LCD_MESSAGEPGM(MSG_RESET_PRINTER); else ui.reset_status();
     });

Marlin/src/lcd/menu/menu_bed_leveling.cpp

@@ -77,7 +77,9 @@
         ui.synchronize(PSTR(MSG_LEVEL_BED_DONE));
       #endif
       ui.goto_previous_screen_no_defer();
+      #if HAS_BUZZER
         ui.completion_feedback();
+      #endif
     }
     if (ui.should_draw()) draw_menu_item_static(LCD_HEIGHT >= 4 ? 1 : 0, PSTR(MSG_LEVEL_BED_DONE));
     ui.refresh(LCDVIEW_CALL_REDRAW_NEXT);

Marlin/src/lcd/menu/menu_configuration.cpp

@@ -56,7 +56,9 @@ void menu_advanced_settings();
 
 static void lcd_factory_settings() {
   settings.reset();
+  #if HAS_BUZZER
     ui.completion_feedback();
+  #endif
 }
 
 #if ENABLED(LCD_PROGRESS_BAR_TEST)

Marlin/src/lcd/menu/menu_custom.cpp

@@ -39,7 +39,7 @@
 
 void _lcd_user_gcode(PGM_P const cmd) {
   queue.inject_P(cmd);
-  #if ENABLED(USER_SCRIPT_AUDIBLE_FEEDBACK)
+  #if ENABLED(USER_SCRIPT_AUDIBLE_FEEDBACK) && HAS_BUZZER
     ui.completion_feedback();
   #endif
   #if ENABLED(USER_SCRIPT_RETURN)

Marlin/src/lcd/menu/menu_service.cpp

@@ -38,7 +38,9 @@ inline void _menu_service(const int index, PGM_P const name) {
     PSTR(MSG_BUTTON_RESET), PSTR(MSG_BUTTON_CANCEL),
     []{
       print_job_timer.resetServiceInterval(index);
-      ui.completion_feedback(true);
+      #if HAS_BUZZER
+        ui.completion_feedback();
+      #endif
       ui.reset_status();
       ui.return_to_status();
     },

Marlin/src/lcd/ultralcd.cpp

@@ -562,7 +562,7 @@ void MarlinUI::status_screen() {
     if (old_frm != new_frm) {
       feedrate_percentage = new_frm;
       encoderPosition = 0;
-      #if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+      #if HAS_BUZZER && ENABLED(BEEP_ON_FEEDRATE_CHANGE)
         static millis_t next_beep;
         #ifndef GOT_MS
           const millis_t ms = millis();
@@ -608,8 +608,10 @@ void MarlinUI::quick_feedback(const bool clear_buttons/*=true*/) {
     UNUSED(clear_buttons);
   #endif
 
-  // Buzz and wait. The delay is needed for buttons to settle!
+  #if HAS_BUZZER
+    // Buzz and wait. Is the delay needed for buttons to settle?
     buzz(LCD_FEEDBACK_FREQUENCY_DURATION_MS, LCD_FEEDBACK_FREQUENCY_HZ);
+  #endif
 
   #if HAS_LCD_MENU
     #if ENABLED(LCD_USE_I2C_BUZZER)

Marlin/src/lcd/ultralcd.h

@@ -258,15 +258,15 @@ public:
     #endif
   }
 
+  #if HAS_BUZZER
     static inline void buzz(const long duration, const uint16_t freq) {
       #if ENABLED(LCD_USE_I2C_BUZZER)
         lcd.buzz(duration, freq);
       #elif PIN_EXISTS(BEEPER)
         buzzer.tone(duration, freq);
-    #else
-      UNUSED(duration); UNUSED(freq);
       #endif
     }
+  #endif
 
   // LCD implementations
   static void clear_lcd();
@@ -355,7 +355,9 @@ public:
       #endif
 
       static void quick_feedback(const bool clear_buttons=true);
+      #if HAS_BUZZER
         static void completion_feedback(const bool good=true);
+      #endif
 
       #if DISABLED(LIGHTWEIGHT_UI)
         static void draw_status_message(const bool blink);
@@ -466,7 +468,11 @@ public:
     #endif
 
     #if ENABLED(G26_MESH_VALIDATION)
-      static inline void chirp() { buzz(LCD_FEEDBACK_FREQUENCY_DURATION_MS, LCD_FEEDBACK_FREQUENCY_HZ); }
+      static inline void chirp() {
+        #if HAS_BUZZER
+          buzz(LCD_FEEDBACK_FREQUENCY_DURATION_MS, LCD_FEEDBACK_FREQUENCY_HZ);
+        #endif
+      }
     #endif
 
     #if ENABLED(AUTO_BED_LEVELING_UBL)

Marlin/src/module/temperature.cpp

@@ -68,7 +68,7 @@
   #include "tool_change.h"
 #endif
 
-#if HAS_BUZZER
+#if HAS_BUZZER && PIN_EXISTS(BEEPER)
   #include "../libs/buzzer.h"
 #endif