Victor Oliveira
4 years ago
committed by
Scott Lahteine
Scott Lahteine
14 changed files with 1090 additions and 10 deletions
@ -0,0 +1,423 @@ |
|||||
|
/*
|
||||
|
******************************************************************************* |
||||
|
* Copyright (c) 2020, STMicroelectronics |
||||
|
* All rights reserved. |
||||
|
* |
||||
|
* This software component is licensed by ST under BSD 3-Clause license, |
||||
|
* the "License"; You may not use this file except in compliance with the |
||||
|
* License. You may obtain a copy of the License at: |
||||
|
* opensource.org/licenses/BSD-3-Clause |
||||
|
* |
||||
|
******************************************************************************* |
||||
|
* Automatically generated from STM32F103R(F-G)Tx.xml |
||||
|
*/ |
||||
|
#include "Arduino.h" |
||||
|
#include "PeripheralPins.h" |
||||
|
|
||||
|
/* =====
|
||||
|
* Note: Commented lines are alternative possibilities which are not used per default. |
||||
|
* If you change them, you will have to know what you do |
||||
|
* ===== |
||||
|
*/ |
||||
|
|
||||
|
//*** ADC ***
|
||||
|
|
||||
|
#ifdef HAL_ADC_MODULE_ENABLED |
||||
|
WEAK const PinMap PinMap_ADC[] = { |
||||
|
{PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0
|
||||
|
// {PA_0, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC2_IN0
|
||||
|
#if defined(STM32F103xE) || defined(STM32F103xG) |
||||
|
// {PA_0, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC3_IN0
|
||||
|
#endif |
||||
|
{PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1
|
||||
|
// {PA_1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC2_IN1
|
||||
|
#if defined(STM32F103xE) || defined(STM32F103xG) |
||||
|
// {PA_1, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC3_IN1
|
||||
|
#endif |
||||
|
{PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2
|
||||
|
// {PA_2, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC2_IN2
|
||||
|
#if defined(STM32F103xE) || defined(STM32F103xG) |
||||
|
// {PA_2, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC3_IN2
|
||||
|
#endif |
||||
|
{PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3
|
||||
|
// {PA_3, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC2_IN3
|
||||
|
#if defined(STM32F103xE) || defined(STM32F103xG) |
||||
|
// {PA_3, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC3_IN3
|
||||
|
#endif |
||||
|
{PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4
|
||||
|
// {PA_4, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC2_IN4
|
||||
|
{PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5
|
||||
|
// {PA_5, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC2_IN5
|
||||
|
{PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6
|
||||
|
// {PA_6, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC2_IN6
|
||||
|
{PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7
|
||||
|
// {PA_7, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC2_IN7
|
||||
|
{PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8
|
||||
|
// {PB_0, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC2_IN8
|
||||
|
{PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9
|
||||
|
// {PB_1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC2_IN9
|
||||
|
{PC_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10
|
||||
|
// {PC_0, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC2_IN10
|
||||
|
#if defined(STM32F103xE) || defined(STM32F103xG) |
||||
|
// {PC_0, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC3_IN10
|
||||
|
#endif |
||||
|
{PC_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11
|
||||
|
// {PC_1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC2_IN11
|
||||
|
#if defined(STM32F103xE) || defined(STM32F103xG) |
||||
|
// {PC_1, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC3_IN11
|
||||
|
#endif |
||||
|
{PC_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12
|
||||
|
// {PC_2, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC2_IN12
|
||||
|
#if defined(STM32F103xE) || defined(STM32F103xG) |
||||
|
// {PC_2, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC3_IN12
|
||||
|
#endif |
||||
|
{PC_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13
|
||||
|
// {PC_3, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC2_IN13
|
||||
|
#if defined(STM32F103xE) || defined(STM32F103xG) |
||||
|
// {PC_3, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC3_IN13
|
||||
|
#endif |
||||
|
{PC_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14
|
||||
|
// {PC_4, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC2_IN14
|
||||
|
{PC_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15
|
||||
|
// {PC_5, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC2_IN15
|
||||
|
{NC, NP, 0} |
||||
|
}; |
||||
|
#endif |
||||
|
|
||||
|
//*** DAC ***
|
||||
|
|
||||
|
#if defined(STM32F103xE) || defined(STM32F103xG) |
||||
|
#ifdef HAL_DAC_MODULE_ENABLED |
||||
|
WEAK const PinMap PinMap_DAC[] = { |
||||
|
{PA_4, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC_OUT1
|
||||
|
{PA_5, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // DAC_OUT2
|
||||
|
{NC, NP, 0} |
||||
|
}; |
||||
|
#endif |
||||
|
#endif |
||||
|
|
||||
|
//*** I2C ***
|
||||
|
|
||||
|
#ifdef HAL_I2C_MODULE_ENABLED |
||||
|
WEAK const PinMap PinMap_I2C_SDA[] = { |
||||
|
{PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, AFIO_NONE)}, |
||||
|
{PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, AFIO_I2C1_ENABLE)}, |
||||
|
#if defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) |
||||
|
{PB_11, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, AFIO_NONE)}, |
||||
|
#endif |
||||
|
{NC, NP, 0} |
||||
|
}; |
||||
|
#endif |
||||
|
|
||||
|
#ifdef HAL_I2C_MODULE_ENABLED |
||||
|
WEAK const PinMap PinMap_I2C_SCL[] = { |
||||
|
{PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, AFIO_NONE)}, |
||||
|
{PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, AFIO_I2C1_ENABLE)}, |
||||
|
#if defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) |
||||
|
{PB_10, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, AFIO_NONE)}, |
||||
|
#endif |
||||
|
{NC, NP, 0} |
||||
|
}; |
||||
|
#endif |
||||
|
|
||||
|
//*** PWM ***
|
||||
|
|
||||
|
#ifdef HAL_TIM_MODULE_ENABLED |
||||
|
WEAK const PinMap PinMap_PWM[] = { |
||||
|
{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM2_CH1
|
||||
|
// {PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_PARTIAL_2, 1, 0)}, // TIM2_CH1
|
||||
|
#if defined(STM32F103xE) || defined(STM32F103xG) |
||||
|
// {PA_0, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM5_CH1
|
||||
|
#endif |
||||
|
{PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 2, 0)}, // TIM2_CH2
|
||||
|
// {PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_PARTIAL_2, 2, 0)}, // TIM2_CH2
|
||||
|
#if defined(STM32F103xE) || defined(STM32F103xG) |
||||
|
// {PA_1, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 2, 0)}, // TIM5_CH2
|
||||
|
#endif |
||||
|
{PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 3, 0)}, // TIM2_CH3
|
||||
|
// {PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_PARTIAL_1, 3, 0)}, // TIM2_CH3
|
||||
|
#if defined(STM32F103xG) |
||||
|
// {PA_2, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 3, 0)}, // TIM5_CH3
|
||||
|
#endif |
||||
|
#if defined(STM32F103xE) || defined(STM32F103xG) |
||||
|
// {PA_2, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM9_CH1
|
||||
|
#endif |
||||
|
// {PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_PARTIAL_1, 4, 0)}, // TIM2_CH4
|
||||
|
#if defined(STM32F103xE) || defined(STM32F103xG) |
||||
|
{PA_3, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 4, 0)}, // TIM5_CH4
|
||||
|
#else |
||||
|
{PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 4, 0)}, // TIM2_CH4
|
||||
|
#endif |
||||
|
#if defined(STM32F103xG) |
||||
|
// {PA_3, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 2, 0)}, // TIM9_CH2
|
||||
|
#endif |
||||
|
{PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM3_CH1
|
||||
|
#if defined(STM32F103xG) |
||||
|
// {PA_6, TIM13, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM13_CH1
|
||||
|
#endif |
||||
|
// {PA_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 2, 0)}, // TIM3_CH2
|
||||
|
#if defined(STM32F103xE) || defined(STM32F103xG) |
||||
|
{PA_7, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 1)}, // TIM8_CH1N
|
||||
|
#else |
||||
|
{PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_PARTIAL, 1, 1)}, // TIM1_CH1N
|
||||
|
#endif |
||||
|
#if defined(STM32F103xG) |
||||
|
// {PA_7, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM14_CH1
|
||||
|
#endif |
||||
|
{PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM1_CH1
|
||||
|
// {PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_PARTIAL, 1, 0)}, // TIM1_CH1
|
||||
|
{PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 2, 0)}, // TIM1_CH2
|
||||
|
// {PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_PARTIAL, 2, 0)}, // TIM1_CH2
|
||||
|
{PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 3, 0)}, // TIM1_CH3
|
||||
|
// {PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_PARTIAL, 3, 0)}, // TIM1_CH3
|
||||
|
{PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 4, 0)}, // TIM1_CH4
|
||||
|
// {PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_PARTIAL, 4, 0)}, // TIM1_CH4
|
||||
|
{PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_PARTIAL_1, 1, 0)}, // TIM2_CH1
|
||||
|
// {PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_ENABLE, 1, 0)}, // TIM2_CH1
|
||||
|
// {PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_PARTIAL, 2, 1)}, // TIM1_CH2N
|
||||
|
{PB_0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 3, 0)}, // TIM3_CH3
|
||||
|
// {PB_0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM3_PARTIAL, 3, 0)}, // TIM3_CH3
|
||||
|
#if defined(STM32F103xE) || defined(STM32F103xG) |
||||
|
// {PB_0, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 2, 1)}, // TIM8_CH2N
|
||||
|
#endif |
||||
|
{PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_PARTIAL, 3, 1)}, // TIM1_CH3N
|
||||
|
// {PB_1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 4, 0)}, // TIM3_CH4
|
||||
|
// {PB_1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM3_PARTIAL, 4, 0)}, // TIM3_CH4
|
||||
|
#if defined(STM32F103xE) || defined(STM32F103xG) |
||||
|
// {PB_1, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 3, 1)}, // TIM8_CH3N
|
||||
|
#endif |
||||
|
{PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_PARTIAL_1, 2, 0)}, // TIM2_CH2
|
||||
|
// {PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_ENABLE, 2, 0)}, // TIM2_CH2
|
||||
|
{PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM3_PARTIAL, 1, 0)}, // TIM3_CH1
|
||||
|
{PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM3_PARTIAL, 2, 0)}, // TIM3_CH2
|
||||
|
#if defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) |
||||
|
{PB_6, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM4_CH1
|
||||
|
{PB_7, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 2, 0)}, // TIM4_CH2
|
||||
|
{PB_8, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 3, 0)}, // TIM4_CH3
|
||||
|
{PB_9, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 4, 0)}, // TIM4_CH4
|
||||
|
#endif |
||||
|
#if defined(STM32F103xG) |
||||
|
// {PB_8, TIM10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM10_CH1
|
||||
|
#endif |
||||
|
#if defined(STM32F103xG) |
||||
|
// {PB_9, TIM11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM11_CH1
|
||||
|
#endif |
||||
|
{PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_PARTIAL_2, 3, 0)}, // TIM2_CH3
|
||||
|
// {PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_ENABLE, 3, 0)}, // TIM2_CH3
|
||||
|
{PB_11, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_PARTIAL_2, 4, 0)}, // TIM2_CH4
|
||||
|
// {PB_11, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_ENABLE, 4, 0)}, // TIM2_CH4
|
||||
|
{PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 1)}, // TIM1_CH1N
|
||||
|
{PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 2, 1)}, // TIM1_CH2N
|
||||
|
#if defined(STM32F103xG) |
||||
|
// {PB_14, TIM12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM12_CH1
|
||||
|
#endif |
||||
|
{PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 3, 1)}, // TIM1_CH3N
|
||||
|
#if defined(STM32F103xG) |
||||
|
// {PB_15, TIM12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 2, 0)}, // TIM12_CH2
|
||||
|
#endif |
||||
|
{PC_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM3_ENABLE, 1, 0)}, // TIM3_CH1
|
||||
|
#if defined(STM32F103xE) || defined(STM32F103xG) |
||||
|
// {PC_6, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM8_CH1
|
||||
|
#endif |
||||
|
{PC_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM3_ENABLE, 2, 0)}, // TIM3_CH2
|
||||
|
#if defined(STM32F103xE) || defined(STM32F103xG) |
||||
|
// {PC_7, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 2, 0)}, // TIM8_CH2
|
||||
|
#endif |
||||
|
#if defined(STM32F103xE) || defined(STM32F103xG) |
||||
|
{PC_8, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 3, 0)}, // TIM8_CH3
|
||||
|
#else |
||||
|
{PC_8, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM3_ENABLE, 3, 0)}, // TIM3_CH3
|
||||
|
#endif |
||||
|
{PC_9, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM3_ENABLE, 4, 0)}, // TIM3_CH4
|
||||
|
#if defined(STM32F103xE) || defined(STM32F103xG) |
||||
|
// {PC_9, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 4, 0)}, // TIM8_CH4
|
||||
|
#endif |
||||
|
{NC, NP, 0} |
||||
|
}; |
||||
|
#endif |
||||
|
|
||||
|
//*** SERIAL ***
|
||||
|
|
||||
|
#ifdef HAL_UART_MODULE_ENABLED |
||||
|
WEAK const PinMap PinMap_UART_TX[] = { |
||||
|
{PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, |
||||
|
{PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, |
||||
|
{PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_USART1_ENABLE)}, |
||||
|
#if defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) |
||||
|
{PB_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, |
||||
|
#endif |
||||
|
#if defined(STM32F103xE) || defined(STM32F103xG) |
||||
|
{PC_10, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, |
||||
|
#endif |
||||
|
#if defined(STM32F103xB) |
||||
|
{PC_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_USART3_PARTIAL)}, |
||||
|
#endif |
||||
|
#if defined(STM32F103xE) || defined(STM32F103xG) |
||||
|
{PC_12, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, |
||||
|
#endif |
||||
|
{NC, NP, 0} |
||||
|
}; |
||||
|
#endif |
||||
|
|
||||
|
#ifdef HAL_UART_MODULE_ENABLED |
||||
|
WEAK const PinMap PinMap_UART_RX[] = { |
||||
|
{PA_3, USART2, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, AFIO_NONE)}, |
||||
|
{PA_10, USART1, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, AFIO_NONE)}, |
||||
|
{PB_7, USART1, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, AFIO_USART1_ENABLE)}, |
||||
|
#if defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) |
||||
|
{PB_11, USART3, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, AFIO_NONE)}, |
||||
|
#endif |
||||
|
#if defined(STM32F103xE) || defined(STM32F103xG) |
||||
|
{PC_11, UART4, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, AFIO_NONE)}, |
||||
|
#endif |
||||
|
#if defined(STM32F103xB) |
||||
|
{PC_11, USART3, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, AFIO_USART3_PARTIAL)}, |
||||
|
#endif |
||||
|
#if defined(STM32F103xE) || defined(STM32F103xG) |
||||
|
{PD_2, UART5, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, AFIO_NONE)}, |
||||
|
#endif |
||||
|
{NC, NP, 0} |
||||
|
}; |
||||
|
#endif |
||||
|
|
||||
|
#ifdef HAL_UART_MODULE_ENABLED |
||||
|
WEAK const PinMap PinMap_UART_RTS[] = { |
||||
|
{PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, |
||||
|
{PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, |
||||
|
#if defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) |
||||
|
{PB_14, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, |
||||
|
{PB_14, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_USART3_PARTIAL)}, |
||||
|
#endif |
||||
|
{NC, NP, 0} |
||||
|
}; |
||||
|
#endif |
||||
|
|
||||
|
#ifdef HAL_UART_MODULE_ENABLED |
||||
|
WEAK const PinMap PinMap_UART_CTS[] = { |
||||
|
{PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, |
||||
|
{PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, |
||||
|
#if defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) |
||||
|
{PB_13, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, |
||||
|
{PB_13, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_USART3_PARTIAL)}, |
||||
|
#endif |
||||
|
{NC, NP, 0} |
||||
|
}; |
||||
|
#endif |
||||
|
|
||||
|
//*** SPI ***
|
||||
|
|
||||
|
#ifdef HAL_SPI_MODULE_ENABLED |
||||
|
WEAK const PinMap PinMap_SPI_MOSI[] = { |
||||
|
{PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, |
||||
|
#if defined(STM32F103xE) || defined(STM32F103xG) |
||||
|
{PB_5, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, |
||||
|
#else |
||||
|
{PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_SPI1_ENABLE)}, |
||||
|
#endif |
||||
|
#if defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) |
||||
|
{PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, |
||||
|
#endif |
||||
|
{NC, NP, 0} |
||||
|
}; |
||||
|
#endif |
||||
|
|
||||
|
#ifdef HAL_SPI_MODULE_ENABLED |
||||
|
WEAK const PinMap PinMap_SPI_MISO[] = { |
||||
|
{PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, |
||||
|
#if defined(STM32F103xE) || defined(STM32F103xG) |
||||
|
{PB_4, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, |
||||
|
#else |
||||
|
{PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_SPI1_ENABLE)}, |
||||
|
#endif |
||||
|
#if defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) |
||||
|
{PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, |
||||
|
#endif |
||||
|
{NC, NP, 0} |
||||
|
}; |
||||
|
#endif |
||||
|
|
||||
|
#ifdef HAL_SPI_MODULE_ENABLED |
||||
|
WEAK const PinMap PinMap_SPI_SCLK[] = { |
||||
|
{PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, |
||||
|
#if defined(STM32F103xE) || defined(STM32F103xG) |
||||
|
{PB_3, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, |
||||
|
#else |
||||
|
{PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_SPI1_ENABLE)}, |
||||
|
#endif |
||||
|
#if defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) |
||||
|
{PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, |
||||
|
#endif |
||||
|
{NC, NP, 0} |
||||
|
}; |
||||
|
#endif |
||||
|
|
||||
|
#ifdef HAL_SPI_MODULE_ENABLED |
||||
|
WEAK const PinMap PinMap_SPI_SSEL[] = { |
||||
|
{PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, |
||||
|
#if defined(STM32F103xE) || defined(STM32F103xG) |
||||
|
{PA_15, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, |
||||
|
#else |
||||
|
{PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_SPI1_ENABLE)}, |
||||
|
#endif |
||||
|
#if defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) |
||||
|
{PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, |
||||
|
#endif |
||||
|
{NC, NP, 0} |
||||
|
}; |
||||
|
#endif |
||||
|
|
||||
|
//*** CAN ***
|
||||
|
|
||||
|
#ifdef HAL_CAN_MODULE_ENABLED |
||||
|
WEAK const PinMap PinMap_CAN_RD[] = { |
||||
|
{PA_11, CAN1, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, AFIO_NONE)}, |
||||
|
{PB_8, CAN1, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, AFIO_CAN1_2)}, |
||||
|
{NC, NP, 0} |
||||
|
}; |
||||
|
#endif |
||||
|
|
||||
|
#ifdef HAL_CAN_MODULE_ENABLED |
||||
|
WEAK const PinMap PinMap_CAN_TD[] = { |
||||
|
{PA_12, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, AFIO_NONE)}, |
||||
|
{PB_9, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, AFIO_CAN1_2)}, |
||||
|
{NC, NP, 0} |
||||
|
}; |
||||
|
#endif |
||||
|
|
||||
|
//*** No ETHERNET ***
|
||||
|
|
||||
|
//*** No QUADSPI ***
|
||||
|
|
||||
|
//*** USB ***
|
||||
|
|
||||
|
#ifdef HAL_PCD_MODULE_ENABLED |
||||
|
WEAK const PinMap PinMap_USB[] = { |
||||
|
{PA_11, USB, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, AFIO_NONE)}, // USB_DM
|
||||
|
{PA_12, USB, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, AFIO_NONE)}, // USB_DP
|
||||
|
{NC, NP, 0} |
||||
|
}; |
||||
|
#endif |
||||
|
|
||||
|
//*** No USB_OTG_FS ***
|
||||
|
|
||||
|
//*** No USB_OTG_HS ***
|
||||
|
|
||||
|
//*** SD ***
|
||||
|
|
||||
|
#if defined(STM32F103xE) || defined(STM32F103xG) |
||||
|
#ifdef HAL_SD_MODULE_ENABLED |
||||
|
WEAK const PinMap PinMap_SD[] = { |
||||
|
{PB_8, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, // SDIO_D4
|
||||
|
{PB_9, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, // SDIO_D5
|
||||
|
{PC_6, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, // SDIO_D6
|
||||
|
{PC_7, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, // SDIO_D7
|
||||
|
{PC_8, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, // SDIO_D0
|
||||
|
{PC_9, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, // SDIO_D1
|
||||
|
{PC_10, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, // SDIO_D2
|
||||
|
{PC_11, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, // SDIO_D3
|
||||
|
{PC_12, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, AFIO_NONE)}, // SDIO_CK
|
||||
|
{PD_2, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, AFIO_NONE)}, // SDIO_CMD
|
||||
|
{NC, NP, 0} |
||||
|
}; |
||||
|
#endif |
||||
|
#endif |
||||
@ -0,0 +1,30 @@ |
|||||
|
/* SYS_WKUP */ |
||||
|
#ifdef PWR_WAKEUP_PIN1 |
||||
|
SYS_WKUP1 = PA_0, |
||||
|
#endif |
||||
|
#ifdef PWR_WAKEUP_PIN2 |
||||
|
SYS_WKUP2 = NC, |
||||
|
#endif |
||||
|
#ifdef PWR_WAKEUP_PIN3 |
||||
|
SYS_WKUP3 = NC, |
||||
|
#endif |
||||
|
#ifdef PWR_WAKEUP_PIN4 |
||||
|
SYS_WKUP4 = NC, |
||||
|
#endif |
||||
|
#ifdef PWR_WAKEUP_PIN5 |
||||
|
SYS_WKUP5 = NC, |
||||
|
#endif |
||||
|
#ifdef PWR_WAKEUP_PIN6 |
||||
|
SYS_WKUP6 = NC, |
||||
|
#endif |
||||
|
#ifdef PWR_WAKEUP_PIN7 |
||||
|
SYS_WKUP7 = NC, |
||||
|
#endif |
||||
|
#ifdef PWR_WAKEUP_PIN8 |
||||
|
SYS_WKUP8 = NC, |
||||
|
#endif |
||||
|
/* USB */ |
||||
|
#ifdef USBCON |
||||
|
USB_DM = PA_11, |
||||
|
USB_DP = PA_12, |
||||
|
#endif |
||||
@ -0,0 +1,200 @@ |
|||||
|
/* |
||||
|
****************************************************************************** |
||||
|
** |
||||
|
|
||||
|
** File : LinkerScript.ld |
||||
|
** |
||||
|
** Author : Auto-generated by STM32CubeIDE |
||||
|
** |
||||
|
** Abstract : Linker script for STM32F103R(8/B/C/ETx Device from STM32F1 series |
||||
|
** 64/128/256/512Kbytes FLASH |
||||
|
** 20/20/48/64Kbytes RAM |
||||
|
** |
||||
|
** Set heap size, stack size and stack location according |
||||
|
** to application requirements. |
||||
|
** |
||||
|
** Set memory bank area and size if external memory is used. |
||||
|
** |
||||
|
** Target : STMicroelectronics STM32 |
||||
|
** |
||||
|
** Distribution: The file is distributed as is without any warranty |
||||
|
** of any kind. |
||||
|
** |
||||
|
***************************************************************************** |
||||
|
** @attention |
||||
|
** |
||||
|
** <h2><center>© COPYRIGHT(c) 2019 STMicroelectronics</center></h2> |
||||
|
** |
||||
|
** Redistribution and use in source and binary forms, with or without modification, |
||||
|
** are permitted provided that the following conditions are met: |
||||
|
** 1. Redistributions of source code must retain the above copyright notice, |
||||
|
** this list of conditions and the following disclaimer. |
||||
|
** 2. Redistributions in binary form must reproduce the above copyright notice, |
||||
|
** this list of conditions and the following disclaimer in the documentation |
||||
|
** and/or other materials provided with the distribution. |
||||
|
** 3. Neither the name of STMicroelectronics nor the names of its contributors |
||||
|
** may be used to endorse or promote products derived from this software |
||||
|
** without specific prior written permission. |
||||
|
** |
||||
|
** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
||||
|
** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
||||
|
** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
||||
|
** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE |
||||
|
** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
||||
|
** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR |
||||
|
** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
||||
|
** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, |
||||
|
** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
||||
|
** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
||||
|
** |
||||
|
***************************************************************************** |
||||
|
*/ |
||||
|
|
||||
|
/* Entry Point */ |
||||
|
ENTRY(Reset_Handler) |
||||
|
|
||||
|
/* Highest address of the user mode stack */ |
||||
|
_estack = 0x20000000 + LD_MAX_DATA_SIZE; /* end of "RAM" Ram type memory */ |
||||
|
_Min_Heap_Size = 0x200; /* required amount of heap */ |
||||
|
_Min_Stack_Size = 0x400; /* required amount of stack */ |
||||
|
|
||||
|
/* Memories definition */ |
||||
|
MEMORY |
||||
|
{ |
||||
|
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = LD_MAX_DATA_SIZE |
||||
|
FLASH (rx) : ORIGIN = 0x8000000 + LD_FLASH_OFFSET, LENGTH = LD_MAX_SIZE - LD_FLASH_OFFSET |
||||
|
} |
||||
|
|
||||
|
/* Sections */ |
||||
|
SECTIONS |
||||
|
{ |
||||
|
/* The startup code into "FLASH" Rom type memory */ |
||||
|
.isr_vector : |
||||
|
{ |
||||
|
. = ALIGN(4); |
||||
|
KEEP(*(.isr_vector)) /* Startup code */ |
||||
|
. = ALIGN(4); |
||||
|
} >FLASH |
||||
|
|
||||
|
/* The program code and other data into "FLASH" Rom type memory */ |
||||
|
.text : |
||||
|
{ |
||||
|
. = ALIGN(4); |
||||
|
*(.text) /* .text sections (code) */ |
||||
|
*(.text*) /* .text* sections (code) */ |
||||
|
*(.glue_7) /* glue arm to thumb code */ |
||||
|
*(.glue_7t) /* glue thumb to arm code */ |
||||
|
*(.eh_frame) |
||||
|
|
||||
|
KEEP (*(.init)) |
||||
|
KEEP (*(.fini)) |
||||
|
|
||||
|
. = ALIGN(4); |
||||
|
_etext = .; /* define a global symbols at end of code */ |
||||
|
} >FLASH |
||||
|
|
||||
|
/* Constant data into "FLASH" Rom type memory */ |
||||
|
.rodata : |
||||
|
{ |
||||
|
. = ALIGN(4); |
||||
|
*(.rodata) /* .rodata sections (constants, strings, etc.) */ |
||||
|
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */ |
||||
|
. = ALIGN(4); |
||||
|
} >FLASH |
||||
|
|
||||
|
.ARM.extab : { |
||||
|
. = ALIGN(4); |
||||
|
*(.ARM.extab* .gnu.linkonce.armextab.*) |
||||
|
. = ALIGN(4); |
||||
|
} >FLASH |
||||
|
.ARM : { |
||||
|
. = ALIGN(4); |
||||
|
__exidx_start = .; |
||||
|
*(.ARM.exidx*) |
||||
|
__exidx_end = .; |
||||
|
. = ALIGN(4); |
||||
|
} >FLASH |
||||
|
|
||||
|
.preinit_array : |
||||
|
{ |
||||
|
. = ALIGN(4); |
||||
|
PROVIDE_HIDDEN (__preinit_array_start = .); |
||||
|
KEEP (*(.preinit_array*)) |
||||
|
PROVIDE_HIDDEN (__preinit_array_end = .); |
||||
|
. = ALIGN(4); |
||||
|
} >FLASH |
||||
|
.init_array : |
||||
|
{ |
||||
|
. = ALIGN(4); |
||||
|
PROVIDE_HIDDEN (__init_array_start = .); |
||||
|
KEEP (*(SORT(.init_array.*))) |
||||
|
KEEP (*(.init_array*)) |
||||
|
PROVIDE_HIDDEN (__init_array_end = .); |
||||
|
. = ALIGN(4); |
||||
|
} >FLASH |
||||
|
.fini_array : |
||||
|
{ |
||||
|
. = ALIGN(4); |
||||
|
PROVIDE_HIDDEN (__fini_array_start = .); |
||||
|
KEEP (*(SORT(.fini_array.*))) |
||||
|
KEEP (*(.fini_array*)) |
||||
|
PROVIDE_HIDDEN (__fini_array_end = .); |
||||
|
. = ALIGN(4); |
||||
|
} >FLASH |
||||
|
|
||||
|
/* Used by the startup to initialize data */ |
||||
|
_sidata = LOADADDR(.data); |
||||
|
|
||||
|
/* Initialized data sections into "RAM" Ram type memory */ |
||||
|
.data : |
||||
|
{ |
||||
|
. = ALIGN(4); |
||||
|
_sdata = .; /* create a global symbol at data start */ |
||||
|
*(.data) /* .data sections */ |
||||
|
*(.data*) /* .data* sections */ |
||||
|
|
||||
|
. = ALIGN(4); |
||||
|
_edata = .; /* define a global symbol at data end */ |
||||
|
} >RAM AT> FLASH |
||||
|
|
||||
|
|
||||
|
/* Uninitialized data section into "RAM" Ram type memory */ |
||||
|
. = ALIGN(4); |
||||
|
.bss : |
||||
|
{ |
||||
|
/* This is used by the startup in order to initialize the .bss secion */ |
||||
|
_sbss = .; /* define a global symbol at bss start */ |
||||
|
__bss_start__ = _sbss; |
||||
|
*(.bss) |
||||
|
*(.bss*) |
||||
|
*(COMMON) |
||||
|
|
||||
|
. = ALIGN(4); |
||||
|
_ebss = .; /* define a global symbol at bss end */ |
||||
|
__bss_end__ = _ebss; |
||||
|
} >RAM |
||||
|
|
||||
|
/* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */ |
||||
|
._user_heap_stack : |
||||
|
{ |
||||
|
. = ALIGN(8); |
||||
|
PROVIDE ( end = . ); |
||||
|
PROVIDE ( _end = . ); |
||||
|
. = . + _Min_Heap_Size; |
||||
|
. = . + _Min_Stack_Size; |
||||
|
. = ALIGN(8); |
||||
|
} >RAM |
||||
|
|
||||
|
|
||||
|
|
||||
|
/* Remove information from the compiler libraries */ |
||||
|
/DISCARD/ : |
||||
|
{ |
||||
|
libc.a ( * ) |
||||
|
libm.a ( * ) |
||||
|
libgcc.a ( * ) |
||||
|
} |
||||
|
|
||||
|
.ARM.attributes 0 : { *(.ARM.attributes) } |
||||
|
} |
||||
|
|
||||
@ -0,0 +1,152 @@ |
|||||
|
/*
|
||||
|
Copyright (c) 2011 Arduino. All right reserved. |
||||
|
|
||||
|
This library is free software; you can redistribute it and/or |
||||
|
modify it under the terms of the GNU Lesser General Public |
||||
|
License as published by the Free Software Foundation; either |
||||
|
version 2.1 of the License, or (at your option) any later version. |
||||
|
|
||||
|
This library is distributed in the hope that it will be useful, |
||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. |
||||
|
See the GNU Lesser General Public License for more details. |
||||
|
|
||||
|
You should have received a copy of the GNU Lesser General Public |
||||
|
License along with this library; if not, write to the Free Software |
||||
|
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
||||
|
*/ |
||||
|
|
||||
|
#include "pins_arduino.h" |
||||
|
|
||||
|
#ifdef __cplusplus |
||||
|
extern "C" { |
||||
|
#endif |
||||
|
|
||||
|
const PinName digitalPin[] = { |
||||
|
PA_0, |
||||
|
PA_1, |
||||
|
PA_2, |
||||
|
PA_3, |
||||
|
PA_4, |
||||
|
PA_5, |
||||
|
PA_6, |
||||
|
PA_7, |
||||
|
PA_8, |
||||
|
PA_9, // RXD
|
||||
|
PA_10, // TXD
|
||||
|
PA_11, // USB D-
|
||||
|
PA_12, // USB D+
|
||||
|
PA_13, // JTDI
|
||||
|
PA_14, // JTCK
|
||||
|
PA_15, |
||||
|
PB_0, |
||||
|
PB_1, |
||||
|
PB_2, |
||||
|
PB_3, // JTDO
|
||||
|
PB_4, // JTRST
|
||||
|
PB_5, |
||||
|
PB_6, |
||||
|
PB_7, |
||||
|
PB_8, |
||||
|
PB_9, |
||||
|
PB_10, |
||||
|
PB_11, // LED
|
||||
|
PB_12, |
||||
|
PB_13, |
||||
|
PB_14, |
||||
|
PB_15, |
||||
|
PC_0, |
||||
|
PC_1, |
||||
|
PC_2, |
||||
|
PC_3, |
||||
|
PC_4, |
||||
|
PC_5, |
||||
|
PC_6, |
||||
|
PC_7, |
||||
|
PC_8, |
||||
|
PC_9, |
||||
|
PC_10, |
||||
|
PC_11, |
||||
|
PC_12, |
||||
|
PC_13, |
||||
|
PC_14, // OSC32_1
|
||||
|
PC_15, // OSC32_2
|
||||
|
PD_0, // OSCIN
|
||||
|
PD_1, // OSCOUT
|
||||
|
PD_2 |
||||
|
}; |
||||
|
|
||||
|
// Analog (Ax) pin number array
|
||||
|
const uint32_t analogInputPin[] = { |
||||
|
0, // A0, PA0
|
||||
|
1, // A1, PA1
|
||||
|
2, // A2, PA2
|
||||
|
3, // A3, PA3
|
||||
|
4, // A4, PA4
|
||||
|
5, // A5, PA5
|
||||
|
6, // A6, PA6
|
||||
|
7, // A7, PA7
|
||||
|
16, // A8, PB0
|
||||
|
17, // A9, PB1
|
||||
|
32, // A10, PC0
|
||||
|
33, // A11, PC1
|
||||
|
34, // A12, PC2
|
||||
|
35, // A13, PC3
|
||||
|
36, // A14, PC4
|
||||
|
37 // A15, PC5
|
||||
|
}; |
||||
|
|
||||
|
#ifdef __cplusplus |
||||
|
} |
||||
|
#endif |
||||
|
|
||||
|
// ----------------------------------------------------------------------------
|
||||
|
|
||||
|
#ifdef __cplusplus |
||||
|
extern "C" { |
||||
|
#endif |
||||
|
|
||||
|
/**
|
||||
|
* @brief System Clock Configuration |
||||
|
* @param None |
||||
|
* @retval None |
||||
|
*/ |
||||
|
WEAK void SystemClock_Config(void) |
||||
|
{ |
||||
|
RCC_OscInitTypeDef RCC_OscInitStruct = {}; |
||||
|
RCC_ClkInitTypeDef RCC_ClkInitStruct = {}; |
||||
|
RCC_PeriphCLKInitTypeDef PeriphClkInit = {}; |
||||
|
|
||||
|
/* Initializes the CPU, AHB and APB busses clocks */ |
||||
|
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; |
||||
|
RCC_OscInitStruct.HSEState = RCC_HSE_ON; |
||||
|
RCC_OscInitStruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1; |
||||
|
RCC_OscInitStruct.HSIState = RCC_HSI_ON; |
||||
|
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; |
||||
|
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; |
||||
|
RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL9; |
||||
|
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) { |
||||
|
Error_Handler(); |
||||
|
} |
||||
|
/* Initializes the CPU, AHB and APB busses clocks */ |
||||
|
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK |
||||
|
| RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2; |
||||
|
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; |
||||
|
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; |
||||
|
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; |
||||
|
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; |
||||
|
|
||||
|
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK) { |
||||
|
Error_Handler(); |
||||
|
} |
||||
|
PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_USB; |
||||
|
PeriphClkInit.AdcClockSelection = RCC_ADCPCLK2_DIV6; |
||||
|
PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_PLL_DIV1_5; |
||||
|
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK) { |
||||
|
Error_Handler(); |
||||
|
} |
||||
|
} |
||||
|
|
||||
|
#ifdef __cplusplus |
||||
|
} |
||||
|
#endif |
||||
@ -0,0 +1,161 @@ |
|||||
|
/*
|
||||
|
Copyright (c) 2011 Arduino. All right reserved. |
||||
|
|
||||
|
This library is free software; you can redistribute it and/or |
||||
|
modify it under the terms of the GNU Lesser General Public |
||||
|
License as published by the Free Software Foundation; either |
||||
|
version 2.1 of the License, or (at your option) any later version. |
||||
|
|
||||
|
This library is distributed in the hope that it will be useful, |
||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. |
||||
|
See the GNU Lesser General Public License for more details. |
||||
|
|
||||
|
You should have received a copy of the GNU Lesser General Public |
||||
|
License along with this library; if not, write to the Free Software |
||||
|
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
||||
|
*/ |
||||
|
|
||||
|
#ifndef _VARIANT_ARDUINO_STM32_ |
||||
|
#define _VARIANT_ARDUINO_STM32_ |
||||
|
|
||||
|
#ifdef __cplusplus |
||||
|
extern "C" { |
||||
|
#endif // __cplusplus
|
||||
|
|
||||
|
|
||||
|
// * = F103R8-B-C-D-E-F-G
|
||||
|
// ** = F103RC-D-E-F-G
|
||||
|
// | DIGITAL | ANALOG | USART | TWI | SPI | SPECIAL |
|
||||
|
// |---------|----------------|--------------------------|-----------|-----------------------|-----------|
|
||||
|
#define PA0 PIN_A0 // | 0 | A0 | | | | |
|
||||
|
#define PA1 PIN_A1 // | 1 | A1 | | | | |
|
||||
|
#define PA2 PIN_A2 // | 2 | A2 | USART2_TX | | | |
|
||||
|
#define PA3 PIN_A3 // | 2 | A2, DAC_OUT1** | USART2_RX | | | |
|
||||
|
#define PA4 PIN_A4 // | 4 | A4, DAC_OUT2** | | | SPI1_SS | |
|
||||
|
#define PA5 PIN_A5 // | 5 | A5 | | | SPI1_SCK | |
|
||||
|
#define PA6 PIN_A6 // | 6 | A6 | | | SPI1_MISO | |
|
||||
|
#define PA7 PIN_A7 // | 7 | A7 | | | SPI1_MOSI | |
|
||||
|
#define PA8 8 // | 8 | | | | | |
|
||||
|
#define PA9 9 // | 9 | | USART1_TX | | | |
|
||||
|
#define PA10 10 // | 10 | | USART1_RX | | | |
|
||||
|
#define PA11 11 // | 11 | | | | | USB_DM |
|
||||
|
#define PA12 12 // | 12 | | | | | USB_DP |
|
||||
|
#define PA13 13 // | 13 | | | | | SWD_SWDIO |
|
||||
|
#define PA14 14 // | 14 | | | | | SWD_SWCLK |
|
||||
|
#define PA15 15 // | 15 | | | | SPI1_SS/SPI3_SS** | |
|
||||
|
// |---------|----------------|--------------------------|-----------|-----------------------|-----------|
|
||||
|
#define PB0 PIN_A8 // | 16 | A8 | | | | |
|
||||
|
#define PB1 PIN_A9 // | 17 | A9 | | | | |
|
||||
|
#define PB2 18 // | 18 | | | | | BOOT1 |
|
||||
|
#define PB3 19 // | 19 | | | | SPI1_SCK/SPI3_SCK** | |
|
||||
|
#define PB4 20 // | 20 | | | | SPI1_MISO/SPI3_MISO** | |
|
||||
|
#define PB5 21 // | 21 | | | | SPI1_MOSI/SPI3_MOSI** | |
|
||||
|
#define PB6 22 // | 22 | | USART1_TX | TWI1_SCL | | |
|
||||
|
#define PB7 23 // | 23 | | USART1_RX | TWI1_SDA | | |
|
||||
|
#define PB8 24 // | 24 | | | TWI1_SCL | | |
|
||||
|
#define PB9 25 // | 25 | | | TWI1_SDA | | |
|
||||
|
#define PB10 26 // | 26 | | USART3_TX* | TWI2_SCL* | | |
|
||||
|
#define PB11 27 // | 27 | | USART3_RX* | TWI2_SDA* | | |
|
||||
|
#define PB12 28 // | 28 | | | | SPI2_SS* | |
|
||||
|
#define PB13 29 // | 29 | | | | SPI2_SCK* | |
|
||||
|
#define PB14 30 // | 30 | | | | SPI2_MISO* | |
|
||||
|
#define PB15 31 // | 31 | | | | SPI2_MOSI* | |
|
||||
|
// |---------|----------------|--------------------------|-----------|-----------------------|-----------|
|
||||
|
#define PC0 PIN_A10 // | 32 | A10 | | | | |
|
||||
|
#define PC1 PIN_A11 // | 33 | A11 | | | | |
|
||||
|
#define PC2 PIN_A12 // | 34 | A12 | | | | |
|
||||
|
#define PC3 PIN_A13 // | 35 | A13 | | | | |
|
||||
|
#define PC4 PIN_A14 // | 36 | A14 | | | | |
|
||||
|
#define PC5 PIN_A15 // | 37 | A15 | | | | |
|
||||
|
#define PC6 38 // | 38 | | | | | |
|
||||
|
#define PC7 39 // | 39 | | | | | |
|
||||
|
#define PC8 40 // | 40 | | | | | |
|
||||
|
#define PC9 41 // | 41 | | | | | |
|
||||
|
#define PC10 42 // | 42 | | USART3_TX*/UART4_TX** | | | |
|
||||
|
#define PC11 43 // | 43 | | USART3_RX*/UART4_RX** | | | |
|
||||
|
#define PC12 44 // | 44 | | UART5_TX** | | | |
|
||||
|
#define PC13 45 // | 45 | | | | | |
|
||||
|
#define PC14 46 // | 46 | | | | | OSC32_IN |
|
||||
|
#define PC15 47 // | 47 | | | | | OSC32_OUT |
|
||||
|
// |---------|----------------|--------------------------|-----------|-----------------------|-----------|
|
||||
|
#define PD0 48 // | 48 | | | | | OSC_IN |
|
||||
|
#define PD1 49 // | 48 | | | | | OSC_OUT |
|
||||
|
#define PD2 50 // | 50 | | UART5_RX** | | | |
|
||||
|
// |---------|----------------|--------------------------|-----------|-----------------------|-----------|
|
||||
|
|
||||
|
// This must be a literal
|
||||
|
#define NUM_DIGITAL_PINS 51 |
||||
|
// This must be a literal with a value less than or equal to to MAX_ANALOG_INPUTS
|
||||
|
#define NUM_ANALOG_INPUTS 16 |
||||
|
|
||||
|
// On-board LED pin number
|
||||
|
#ifndef LED_BUILTIN |
||||
|
#define LED_BUILTIN PB11 |
||||
|
#endif |
||||
|
#define LED_GREEN LED_BUILTIN |
||||
|
|
||||
|
// On-board user button
|
||||
|
#ifndef USER_BTN |
||||
|
#define USER_BTN PC13 |
||||
|
#endif |
||||
|
|
||||
|
// Override default Arduino configuration
|
||||
|
// SPI Definitions
|
||||
|
#define PIN_SPI_SS PA4 |
||||
|
#define PIN_SPI_MOSI PA7 |
||||
|
#define PIN_SPI_MISO PA6 |
||||
|
#define PIN_SPI_SCK PA5 |
||||
|
|
||||
|
// I2C Definitions
|
||||
|
#define PIN_WIRE_SDA PB7 |
||||
|
#define PIN_WIRE_SCL PB6 |
||||
|
|
||||
|
// Timer Definitions
|
||||
|
#ifndef TIMER_TONE |
||||
|
#define TIMER_TONE TIM3 |
||||
|
#endif |
||||
|
#ifndef TIMER_SERVO |
||||
|
#define TIMER_SERVO TIM2 |
||||
|
#endif |
||||
|
// UART Definitions
|
||||
|
// Define here Serial instance number to map on Serial generic name
|
||||
|
#define SERIAL_UART_INSTANCE 1 |
||||
|
|
||||
|
// Default pin used for 'Serial1' instance
|
||||
|
#define PIN_SERIAL_RX PA10 |
||||
|
#define PIN_SERIAL_TX PA9 |
||||
|
|
||||
|
/* Extra HAL modules */ |
||||
|
#if defined(STM32F103xE) || defined(STM32F103xG) |
||||
|
#define HAL_DAC_MODULE_ENABLED |
||||
|
#endif |
||||
|
|
||||
|
#ifdef __cplusplus |
||||
|
} // extern "C"
|
||||
|
#endif |
||||
|
/*----------------------------------------------------------------------------
|
||||
|
* Arduino objects - C++ only |
||||
|
*----------------------------------------------------------------------------*/ |
||||
|
|
||||
|
#ifdef __cplusplus |
||||
|
// These serial port names are intended to allow libraries and architecture-neutral
|
||||
|
// sketches to automatically default to the correct port name for a particular type
|
||||
|
// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
|
||||
|
// the first hardware serial port whose RX/TX pins are not dedicated to another use.
|
||||
|
//
|
||||
|
// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor
|
||||
|
//
|
||||
|
// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial
|
||||
|
//
|
||||
|
// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library
|
||||
|
//
|
||||
|
// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins.
|
||||
|
//
|
||||
|
// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX
|
||||
|
// pins are NOT connected to anything by default.
|
||||
|
#define SERIAL_PORT_MONITOR Serial |
||||
|
#define SERIAL_PORT_HARDWARE Serial1 |
||||
|
#endif |
||||
|
|
||||
|
#endif /* _VARIANT_ARDUINO_STM32_ */ |
||||
@ -0,0 +1,17 @@ |
|||||
|
#!/usr/bin/env bash |
||||
|
# |
||||
|
# Build tests for STM32F103RC BigTreeTech (SKR Mini v1.1) |
||||
|
# |
||||
|
|
||||
|
# exit on first failure |
||||
|
set -e |
||||
|
|
||||
|
# |
||||
|
# Build with the default configurations |
||||
|
# |
||||
|
restore_configs |
||||
|
opt_set MOTHERBOARD BOARD_BTT_SKR_MINI_V1_1 SERIAL_PORT 1 SERIAL_PORT_2 -1 |
||||
|
exec_test $1 $2 "BigTreeTech SKR Mini v1.1 - Basic Configuration" "$3" |
||||
|
|
||||
|
# clean up |
||||
|
restore_configs |
||||
@ -0,0 +1,20 @@ |
|||||
|
#!/usr/bin/env bash |
||||
|
# |
||||
|
# Build tests for STM32F103RC BigTreeTech (SKR Mini E3) |
||||
|
# |
||||
|
|
||||
|
# exit on first failure |
||||
|
set -e |
||||
|
|
||||
|
# |
||||
|
# Build with the default configurations |
||||
|
# |
||||
|
restore_configs |
||||
|
opt_set MOTHERBOARD BOARD_BTT_SKR_MINI_E3_V1_0 SERIAL_PORT 1 SERIAL_PORT_2 -1 \ |
||||
|
X_DRIVER_TYPE TMC2209 Y_DRIVER_TYPE TMC2209 Z_DRIVER_TYPE TMC2209 E0_DRIVER_TYPE TMC2209 |
||||
|
opt_enable PINS_DEBUGGING Z_IDLE_HEIGHT |
||||
|
|
||||
|
exec_test $1 $2 "BigTreeTech SKR Mini E3 1.0 - Basic Config with TMC2209 HW Serial" "$3" |
||||
|
|
||||
|
# clean up |
||||
|
restore_configs |
||||
Loading…
Reference in new issue