Josh Schroeder
4 years ago
committed by
GitHub
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with
23 additions and
1 deletions
-
Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h
|
|
@ -234,6 +234,28 @@ |
|
|
*/ |
|
|
*/ |
|
|
#if HAS_WIRED_LCD |
|
|
#if HAS_WIRED_LCD |
|
|
#if ENABLED(ANET_FULL_GRAPHICS_LCD) |
|
|
#if ENABLED(ANET_FULL_GRAPHICS_LCD) |
|
|
|
|
|
#error "CAUTION! ANET_FULL_GRAPHICS_LCD requires wiring modifications. See 'pins_BTT_SKR_V1_4.h' for details. Comment out this line to continue." |
|
|
|
|
|
|
|
|
|
|
|
/**
|
|
|
|
|
|
* 1. Cut the tab off the LCD connector so it can be plugged into the "EXP1" connector the other way. |
|
|
|
|
|
* 2. Swap the LCD's +5V (Pin2) and GND (Pin1) wires. (This is the critical part!) |
|
|
|
|
|
* 3. Rewire the CLK Signal (LCD Pin9) to LCD Pin7. (LCD Pin9 remains open because this pin is open drain.) |
|
|
|
|
|
* 4. A wire is needed to connect the Reset switch at J3 (LCD Pin7) to EXP2 (Pin3) on the board. |
|
|
|
|
|
* |
|
|
|
|
|
* !!! If you are unsure, ask for help! Your motherboard may be damaged in some circumstances !!! |
|
|
|
|
|
* |
|
|
|
|
|
* The ANET_FULL_GRAPHICS_LCD connector plug: |
|
|
|
|
|
* |
|
|
|
|
|
* BEFORE AFTER |
|
|
|
|
|
* _____ _____ |
|
|
|
|
|
* GND 1 | 1 2 | 2 5V 5V 1 | 1 2 | 2 GND |
|
|
|
|
|
* CS 3 | 3 4 | 4 BTN_EN2 CS 3 | 3 4 | 4 BTN_EN2 |
|
|
|
|
|
* SID 5 | 5 6 6 BTN_EN1 SID 5 | 5 6 6 BTN_EN1 |
|
|
|
|
|
* open 7 | 7 8 | 8 BTN_ENC CLK 7 | 7 8 | 8 BTN_ENC |
|
|
|
|
|
* CLK 9 | 9 10| 10 Beeper open 9 | 9 10| 10 Beeper |
|
|
|
|
|
* ----- ----- |
|
|
|
|
|
* LCD LCD |
|
|
|
|
|
*/ |
|
|
|
|
|
|
|
|
#define LCD_PINS_RS P1_23 |
|
|
#define LCD_PINS_RS P1_23 |
|
|
|
|
|
|
|
|
|
