🩹 Fix non-PWM cutter compile (#23169)

Marlin/src/feature/spindle_laser.h

@@ -41,18 +41,10 @@
 #define PCT_TO_PWM(X) ((X) * 255 / 100)
 #define PCT_TO_SERVO(X) ((X) * 180 / 100)
 
-#ifndef SPEED_POWER_INTERCEPT
-  #define SPEED_POWER_INTERCEPT 0
-#endif
-
 // #define _MAP(N,S1,S2,D1,D2) ((N)*_MAX((D2)-(D1),0)/_MAX((S2)-(S1),1)+(D1))
 
 class SpindleLaser {
 public:
-  static constexpr float
-    min_pct = TERN(CUTTER_POWER_RELATIVE, 0, TERN(SPINDLE_FEATURE, round(100.0f * (SPEED_POWER_MIN) / (SPEED_POWER_MAX)), SPEED_POWER_MIN)),
-    max_pct = TERN(SPINDLE_FEATURE, 100, SPEED_POWER_MAX);
-
   static const inline uint8_t pct_to_ocr(const_float_t pct) { return uint8_t(PCT_TO_PWM(pct)); }
 
   // cpower = configured values (e.g., SPEED_POWER_MAX)
@@ -158,6 +150,9 @@ public:
     }
 
     static inline cutter_power_t power_to_range(const cutter_power_t pwr, const uint8_t pwrUnit) {
+      static constexpr float
+        min_pct = TERN(CUTTER_POWER_RELATIVE, 0, TERN(SPINDLE_FEATURE, round(100.0f * (SPEED_POWER_MIN) / (SPEED_POWER_MAX)), SPEED_POWER_MIN)),
+        max_pct = TERN(SPINDLE_FEATURE, 100, SPEED_POWER_MAX);
       if (pwr <= 0) return 0;
       cutter_power_t upwr;
       switch (pwrUnit) {
@@ -186,6 +181,7 @@ public:
       }
       return upwr;
     }
+
   #endif // SPINDLE_LASER_USE_PWM
 
   /**

Marlin/src/feature/spindle_laser_types.h

@@ -28,12 +28,34 @@
 
 #include "../inc/MarlinConfigPre.h"
 
+#define MSG_CUTTER(M) _MSG_CUTTER(M)
+
+#ifndef SPEED_POWER_INTERCEPT
+  #define SPEED_POWER_INTERCEPT 0
+#endif
 #if ENABLED(SPINDLE_FEATURE)
   #define _MSG_CUTTER(M) MSG_SPINDLE_##M
+  #ifndef SPEED_POWER_MIN
+    #define SPEED_POWER_MIN      5000
+  #endif
+  #ifndef SPEED_POWER_MAX
+    #define SPEED_POWER_MAX     30000
+  #endif
+  #ifndef SPEED_POWER_STARTUP
+    #define SPEED_POWER_STARTUP 25000
+  #endif
 #else
   #define _MSG_CUTTER(M) MSG_LASER_##M
+  #ifndef SPEED_POWER_MIN
+    #define SPEED_POWER_MIN         0
+  #endif
+  #ifndef SPEED_POWER_MAX
+    #define SPEED_POWER_MAX       255
+  #endif
+  #ifndef SPEED_POWER_STARTUP
+    #define SPEED_POWER_STARTUP   255
+  #endif
 #endif
-#define MSG_CUTTER(M) _MSG_CUTTER(M)
 
 typedef IF<(SPEED_POWER_MAX > 255), uint16_t, uint8_t>::type cutter_cpower_t;
 

Marlin/src/gcode/control/M3-M5.cpp

@@ -66,6 +66,7 @@
  *  PWM duty cycle goes from 0 (off) to 255 (always on).
  */
 void GcodeSuite::M3_M4(const bool is_M4) {
+  #if EITHER(SPINDLE_LASER_USE_PWM, SPINDLE_SERVO)
     auto get_s_power = [] {
       if (parser.seenval('S')) {
         const float spwr = parser.value_float();
@@ -81,6 +82,7 @@ void GcodeSuite::M3_M4(const bool is_M4) {
         cutter.unitPower = cutter.cpwr_to_upwr(SPEED_POWER_STARTUP);
       return cutter.unitPower;
     };
+  #endif
 
   #if ENABLED(LASER_POWER_INLINE)
     if (parser.seen('I') == DISABLED(LASER_POWER_INLINE_INVERT)) {

buildroot/tests/mega1280

@@ -27,6 +27,12 @@ opt_enable SPINDLE_FEATURE ULTIMAKERCONTROLLER LCD_BED_LEVELING \
            EXTERNAL_CLOSED_LOOP_CONTROLLER POWER_MONITOR_CURRENT POWER_MONITOR_VOLTAGE
 exec_test $1 $2 "Spindle, MESH_BED_LEVELING, closed loop, Power Monitor, and LCD" "$3"
 
+#
+# ...and without PWM
+#
+opt_disable SPINDLE_LASER_USE_PWM
+exec_test $1 $2 "(No PWM)" "$3"
+
 #
 # Test DUAL_X_CARRIAGE
 #