Browse Source

Fix for M109 and M190 cooldown

Also removes the re-definition of now inside M190's while loop
pull/1/head
gralco 9 years ago
committed by Scott Lahteine
parent
commit
c218db136a
  1. 38
      Marlin/Marlin_main.cpp

38
Marlin/Marlin_main.cpp

@ -4242,12 +4242,11 @@ inline void gcode_M105() {
* Rxxx Wait for extruder(s) to reach temperature. Waits when heating and cooling.
*/
inline void gcode_M109() {
bool no_wait_for_cooling = true;
if (setTargetedHotend(109)) return;
if (DEBUGGING(DRYRUN)) return;
no_wait_for_cooling = code_seen('S');
bool no_wait_for_cooling = code_seen('S');
if (no_wait_for_cooling || code_seen('R')) {
float temp = code_value();
setTargetHotend(temp, target_extruder);
@ -4282,12 +4281,14 @@ inline void gcode_M109() {
if (code_seen('B')) autotemp_max = code_value();
#endif
// Exit if the temperature is above target and not waiting for cooling
if (no_wait_for_cooling && !isHeatingHotend(target_extruder)) return;
bool wants_to_cool = isCoolingHotend(target_extruder);
// Exit if S<lower>, continue if S<higher>, R<lower>, or R<higher>
if (no_wait_for_cooling && wants_to_cool) return;
// Prevents a wait-forever situation if R is misused i.e. M109 R0
// Try to calculate a ballpark safe margin by halving EXTRUDE_MINTEMP
if (degTargetHotend(target_extruder) < (EXTRUDE_MINTEMP)/2) return;
if (wants_to_cool && degTargetHotend(target_extruder) < (EXTRUDE_MINTEMP)/2) return;
#ifdef TEMP_RESIDENCY_TIME
millis_t residency_start_ms = 0;
@ -4295,12 +4296,12 @@ inline void gcode_M109() {
#define TEMP_CONDITIONS (!residency_start_ms || PENDING(now, residency_start_ms + (TEMP_RESIDENCY_TIME) * 1000UL))
#else
// Loop until the temperature is very close target
#define TEMP_CONDITIONS (isHeatingHotend(target_extruder))
#define TEMP_CONDITIONS (wants_to_cool ? isCoolingHotend(target_extruder) : isHeatingHotend(target_extruder))
#endif //TEMP_RESIDENCY_TIME
cancel_heatup = false;
millis_t now = millis(), next_temp_ms = now + 1000UL;
while (!cancel_heatup && TEMP_CONDITIONS) {
millis_t now, next_temp_ms = 0;
do {
now = millis();
if (ELAPSED(now, next_temp_ms)) { //Print temp & remaining time every 1s while waiting
next_temp_ms = now + 1000UL;
@ -4326,7 +4327,7 @@ inline void gcode_M109() {
#ifdef TEMP_RESIDENCY_TIME
float temp_diff = labs(degHotend(target_extruder) - degTargetHotend(target_extruder));
float temp_diff = fabs(degTargetHotend(target_extruder) - degHotend(target_extruder));
if (!residency_start_ms) {
// Start the TEMP_RESIDENCY_TIME timer when we reach target temp for the first time.
@ -4339,7 +4340,7 @@ inline void gcode_M109() {
#endif //TEMP_RESIDENCY_TIME
} // while(!cancel_heatup && TEMP_CONDITIONS)
} while (!cancel_heatup && TEMP_CONDITIONS);
LCD_MESSAGEPGM(MSG_HEATING_COMPLETE);
}
@ -4355,15 +4356,18 @@ inline void gcode_M109() {
LCD_MESSAGEPGM(MSG_BED_HEATING);
bool no_wait_for_cooling = code_seen('S');
if (no_wait_for_cooling || code_seen('R'))
setTargetBed(code_value());
if (no_wait_for_cooling || code_seen('R')) setTargetBed(code_value());
bool wants_to_cool = isCoolingBed();
// Exit if the temperature is above target and not waiting for cooling
if (no_wait_for_cooling && !isHeatingBed()) return;
// Exit if S<lower>, continue if S<higher>, R<lower>, or R<higher>
if (no_wait_for_cooling && wants_to_cool) return;
cancel_heatup = false;
millis_t now = millis(), next_temp_ms = now + 1000UL;
while (!cancel_heatup && isHeatingBed()) {
millis_t next_temp_ms = 0;
// Wait for temperature to come close enough
do {
millis_t now = millis();
if (ELAPSED(now, next_temp_ms)) { //Print Temp Reading every 1 second while heating up.
next_temp_ms = now + 1000UL;
@ -4372,7 +4376,7 @@ inline void gcode_M109() {
}
idle();
refresh_cmd_timeout(); // to prevent stepper_inactive_time from running out
}
} while (!cancel_heatup && (wants_to_cool ? isCoolingBed() : isHeatingBed()));
LCD_MESSAGEPGM(MSG_BED_DONE);
}

Loading…
Cancel
Save