石立枫
4 years ago
committed by
GitHub
GitHub
7 changed files with 219 additions and 1 deletions
@ -0,0 +1,172 @@ |
|||||
|
/**
|
||||
|
* Marlin 3D Printer Firmware |
||||
|
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
|
* |
||||
|
* Based on Sprinter and grbl. |
||||
|
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm |
||||
|
* |
||||
|
* This program is free software: you can redistribute it and/or modify |
||||
|
* it under the terms of the GNU General Public License as published by |
||||
|
* the Free Software Foundation, either version 3 of the License, or |
||||
|
* (at your option) any later version. |
||||
|
* |
||||
|
* This program is distributed in the hope that it will be useful, |
||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
|
* GNU General Public License for more details. |
||||
|
* |
||||
|
* You should have received a copy of the GNU General Public License |
||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
|
* |
||||
|
*/ |
||||
|
#pragma once |
||||
|
|
||||
|
#ifndef __STM32F1__ |
||||
|
#error "Oops! Select an STM32F1 board in 'Tools > Board.'" |
||||
|
#endif |
||||
|
|
||||
|
#define BOARD_INFO_NAME "FLY_MINI" |
||||
|
#define BOARD_WEBSITE_URL "github.com/FLYmaker" |
||||
|
#define DISABLE_JTAG |
||||
|
|
||||
|
//
|
||||
|
// Flash EEPROM Emulation
|
||||
|
//
|
||||
|
#define FLASH_EEPROM_EMULATION |
||||
|
#define EEPROM_PAGE_SIZE 0x800 // 2KB
|
||||
|
#define EEPROM_START_ADDRESS (0x8000000 + 256 * 1024 - 2 * EEPROM_PAGE_SIZE) // 256K firmware space
|
||||
|
#define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE |
||||
|
|
||||
|
//
|
||||
|
// Servos
|
||||
|
//
|
||||
|
#define SERVO0_PIN PA8 |
||||
|
|
||||
|
//
|
||||
|
// Limit Switches
|
||||
|
//
|
||||
|
#define X_MIN_PIN PC12 |
||||
|
#define X_MAX_PIN PC11 |
||||
|
#define Y_MIN_PIN PC10 |
||||
|
#define Y_MAX_PIN PA15 |
||||
|
#define Z_MIN_PIN PA14 |
||||
|
#define Z_MAX_PIN PA13 |
||||
|
|
||||
|
//
|
||||
|
// Steppers
|
||||
|
//
|
||||
|
#define X_STEP_PIN PB1 |
||||
|
#define X_DIR_PIN PB2 |
||||
|
#define X_ENABLE_PIN PB10 |
||||
|
#ifndef X_CS_PIN |
||||
|
#define X_CS_PIN PB0 |
||||
|
#endif |
||||
|
|
||||
|
#define Y_STEP_PIN PA2 |
||||
|
#define Y_DIR_PIN PC4 |
||||
|
#define Y_ENABLE_PIN PC5 |
||||
|
#ifndef Y_CS_PIN |
||||
|
#define Y_CS_PIN PA7 |
||||
|
#endif |
||||
|
|
||||
|
#define Z_STEP_PIN PA3 |
||||
|
#define Z_DIR_PIN PA5 |
||||
|
#define Z_ENABLE_PIN PA6 |
||||
|
#ifndef Z_CS_PIN |
||||
|
#define Z_CS_PIN PA4 |
||||
|
#endif |
||||
|
|
||||
|
#define E0_STEP_PIN PA1 |
||||
|
#define E0_DIR_PIN PC3 |
||||
|
#define E0_ENABLE_PIN PA0 |
||||
|
#ifndef E0_CS_PIN |
||||
|
#define E0_CS_PIN PC2 |
||||
|
#endif |
||||
|
|
||||
|
#if ENABLED(TMC_USE_SW_SPI) |
||||
|
#ifndef TMC_SW_MOSI |
||||
|
#define TMC_SW_MOSI PB15 |
||||
|
#endif |
||||
|
#ifndef TMC_SW_MISO |
||||
|
#define TMC_SW_MISO PB14 |
||||
|
#endif |
||||
|
#ifndef TMC_SW_SCK |
||||
|
#define TMC_SW_SCK PB13 |
||||
|
#endif |
||||
|
#endif |
||||
|
|
||||
|
#if HAS_TMC_UART |
||||
|
//
|
||||
|
// Software serial
|
||||
|
//
|
||||
|
#define X_SERIAL_TX_PIN PB0 |
||||
|
#define X_SERIAL_RX_PIN PB0 |
||||
|
#define Y_SERIAL_TX_PIN PA7 |
||||
|
#define Y_SERIAL_RX_PIN PA7 |
||||
|
#define Z_SERIAL_TX_PIN PA4 |
||||
|
#define Z_SERIAL_RX_PIN PA4 |
||||
|
#define E0_SERIAL_TX_PIN PC2 |
||||
|
#define E0_SERIAL_RX_PIN PC2 |
||||
|
#endif |
||||
|
|
||||
|
//
|
||||
|
// Heaters / Fans
|
||||
|
//
|
||||
|
#define HEATER_0_PIN PC6 |
||||
|
#define HEATER_BED_PIN PC7 |
||||
|
#ifndef FAN_PIN |
||||
|
#define FAN_PIN PC8 |
||||
|
#endif |
||||
|
#define FAN1_PIN PC9 |
||||
|
|
||||
|
//
|
||||
|
// Temperature Sensors
|
||||
|
//
|
||||
|
#define TEMP_BED_PIN PC0 // Analog Input
|
||||
|
#define TEMP_0_PIN PC1 // Analog Input
|
||||
|
|
||||
|
//
|
||||
|
// LCD Pins
|
||||
|
//
|
||||
|
|
||||
|
//
|
||||
|
// LCD / Controller
|
||||
|
//
|
||||
|
#define ENABLE_SPI2 |
||||
|
#define SS_PIN PB12 |
||||
|
#define SCK_PIN PB13 |
||||
|
#define MISO_PIN PB14 |
||||
|
#define MOSI_PIN PB15 |
||||
|
|
||||
|
#define SDSS SS_PIN |
||||
|
#define SD_DETECT_PIN PB11 |
||||
|
|
||||
|
#define BEEPER_PIN PC14 |
||||
|
|
||||
|
#define LCD_PINS_RS PB8 |
||||
|
#define LCD_PINS_ENABLE PB9 |
||||
|
#define LCD_PINS_D4 PB7 |
||||
|
#define LCD_PINS_D5 PB6 |
||||
|
#define LCD_PINS_D6 PB5 |
||||
|
#define LCD_PINS_D7 PB4 |
||||
|
|
||||
|
#define BTN_EN1 PD2 |
||||
|
#define BTN_EN2 PB3 |
||||
|
#define BTN_ENC PC13 |
||||
|
|
||||
|
//
|
||||
|
// Filament runout
|
||||
|
//
|
||||
|
|
||||
|
//
|
||||
|
// ST7920 Delays
|
||||
|
//
|
||||
|
#ifndef ST7920_DELAY_1 |
||||
|
#define ST7920_DELAY_1 DELAY_NS(96) |
||||
|
#endif |
||||
|
#ifndef ST7920_DELAY_2 |
||||
|
#define ST7920_DELAY_2 DELAY_NS(48) |
||||
|
#endif |
||||
|
#ifndef ST7920_DELAY_3 |
||||
|
#define ST7920_DELAY_3 DELAY_NS(715) |
||||
|
#endif |
||||
@ -0,0 +1,14 @@ |
|||||
|
MEMORY |
||||
|
{ |
||||
|
ram (rwx) : ORIGIN = 0x20000000, LENGTH = 48K - 40 |
||||
|
rom (rx) : ORIGIN = 0x08005000, LENGTH = 256K - 20K - 4K |
||||
|
} |
||||
|
|
||||
|
/* Provide memory region aliases for common.inc */ |
||||
|
REGION_ALIAS("REGION_TEXT", rom); |
||||
|
REGION_ALIAS("REGION_DATA", ram); |
||||
|
REGION_ALIAS("REGION_BSS", ram); |
||||
|
REGION_ALIAS("REGION_RODATA", rom); |
||||
|
|
||||
|
/* Let common.inc handle the real work. */ |
||||
|
INCLUDE common.inc |
||||
@ -0,0 +1,16 @@ |
|||||
|
import os |
||||
|
Import("env") |
||||
|
|
||||
|
# Relocate firmware from 0x08000000 to 0x08005000 |
||||
|
for define in env['CPPDEFINES']: |
||||
|
if define[0] == "VECT_TAB_ADDR": |
||||
|
env['CPPDEFINES'].remove(define) |
||||
|
env['CPPDEFINES'].append(("VECT_TAB_ADDR", "0x08005000")) |
||||
|
|
||||
|
custom_ld_script = os.path.abspath("buildroot/share/PlatformIO/ldscripts/fly_mini.ld") |
||||
|
for i, flag in enumerate(env["LINKFLAGS"]): |
||||
|
if "-Wl,-T" in flag: |
||||
|
env["LINKFLAGS"][i] = "-Wl,-T" + custom_ld_script |
||||
|
elif flag == "-T": |
||||
|
env["LINKFLAGS"][i + 1] = custom_ld_script |
||||
|
|
||||
Loading…
Reference in new issue