mks-viva
5 years ago
committed by
GitHub
GitHub
7 changed files with 460 additions and 0 deletions
@ -0,0 +1,178 @@ |
|||||
|
/**
|
||||
|
* Marlin 3D Printer Firmware |
||||
|
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
|
* |
||||
|
* Based on Sprinter and grbl. |
||||
|
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm |
||||
|
* |
||||
|
* This program is free software: you can redistribute it and/or modify |
||||
|
* it under the terms of the GNU General Public License as published by |
||||
|
* the Free Software Foundation, either version 3 of the License, or |
||||
|
* (at your option) any later version. |
||||
|
* |
||||
|
* This program is distributed in the hope that it will be useful, |
||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
|
* GNU General Public License for more details. |
||||
|
* |
||||
|
* You should have received a copy of the GNU General Public License |
||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
|
* |
||||
|
*/ |
||||
|
#pragma once |
||||
|
|
||||
|
/**
|
||||
|
* MKS Robin E3D (STM32F103RCT6) board pin assignments |
||||
|
*/ |
||||
|
|
||||
|
#ifndef __STM32F1__ |
||||
|
#error "Oops! Select an STM32F1 board in 'Tools > Board.'" |
||||
|
#elif HOTENDS > 1 || E_STEPPERS > 1 |
||||
|
#error "MKS Robin E3D supports up to 1 hotends / E-steppers. Comment out this line to continue." |
||||
|
#endif |
||||
|
|
||||
|
#ifndef BOARD_INFO_NAME |
||||
|
#define BOARD_INFO_NAME "MKS Robin E3D" |
||||
|
#endif |
||||
|
#define BOARD_WEBSITE_URL "github.com/makerbase-mks" |
||||
|
|
||||
|
//#define DISABLE_DEBUG
|
||||
|
#define DISABLE_JTAG |
||||
|
#define ENABLE_SPI2 |
||||
|
|
||||
|
//
|
||||
|
// Servos
|
||||
|
//
|
||||
|
#define SERVO0_PIN PA3 |
||||
|
|
||||
|
//
|
||||
|
// Limit Switches
|
||||
|
//
|
||||
|
#define X_STOP_PIN PA12 |
||||
|
#define Y_STOP_PIN PA11 |
||||
|
#define Z_MIN_PIN PC6 |
||||
|
#define Z_MAX_PIN PB1 |
||||
|
|
||||
|
//
|
||||
|
// Steppers
|
||||
|
//
|
||||
|
#define X_STEP_PIN PC0 |
||||
|
#define X_DIR_PIN PB2 |
||||
|
#define X_ENABLE_PIN PC13 |
||||
|
|
||||
|
#define Y_STEP_PIN PC2 |
||||
|
#define Y_DIR_PIN PB9 |
||||
|
#define Y_ENABLE_PIN PB12 |
||||
|
|
||||
|
#define Z_STEP_PIN PB7 |
||||
|
#define Z_DIR_PIN PB6 |
||||
|
#define Z_ENABLE_PIN PB8 |
||||
|
|
||||
|
#define E0_STEP_PIN PB4 |
||||
|
#define E0_DIR_PIN PB3 |
||||
|
#define E0_ENABLE_PIN PB5 |
||||
|
|
||||
|
#if HAS_TMC220x |
||||
|
/**
|
||||
|
* TMC2208/TMC2209 stepper drivers |
||||
|
* |
||||
|
* Hardware serial communication ports. |
||||
|
* If undefined software serial is used according to the pins below |
||||
|
*/ |
||||
|
//#define X_HARDWARE_SERIAL Serial1
|
||||
|
//#define Y_HARDWARE_SERIAL Serial1
|
||||
|
//#define Z_HARDWARE_SERIAL Serial1
|
||||
|
//#define E0_HARDWARE_SERIAL Serial1
|
||||
|
|
||||
|
//
|
||||
|
// Software serial
|
||||
|
//
|
||||
|
#define X_SERIAL_TX_PIN PC7 |
||||
|
#define X_SERIAL_RX_PIN PC7 |
||||
|
|
||||
|
#define Y_SERIAL_TX_PIN PD2 |
||||
|
#define Y_SERIAL_RX_PIN PD2 |
||||
|
|
||||
|
#define Z_SERIAL_TX_PIN PC12 |
||||
|
#define Z_SERIAL_RX_PIN PC12 |
||||
|
|
||||
|
#define E0_SERIAL_TX_PIN PC11 |
||||
|
#define E0_SERIAL_RX_PIN PC11 |
||||
|
|
||||
|
// Reduce baud rate to improve software serial reliability
|
||||
|
#define TMC_BAUD_RATE 19200 |
||||
|
#endif |
||||
|
|
||||
|
//
|
||||
|
// Heaters 0,1 / Fans / Bed
|
||||
|
//
|
||||
|
#define HEATER_0_PIN PC9 |
||||
|
#define FAN_PIN PA8 |
||||
|
#define HEATER_BED_PIN PC8 |
||||
|
|
||||
|
//
|
||||
|
// Temperature Sensors
|
||||
|
//
|
||||
|
#define TEMP_BED_PIN PA1 //TB
|
||||
|
#define TEMP_0_PIN PA0 //TH1
|
||||
|
|
||||
|
#define FIL_RUNOUT_PIN PB10 // MT_DET
|
||||
|
|
||||
|
//
|
||||
|
// LCD Pins
|
||||
|
//
|
||||
|
#if HAS_SPI_LCD |
||||
|
|
||||
|
#define BEEPER_PIN PC1 |
||||
|
#define BTN_ENC PC3 |
||||
|
#define LCD_PINS_ENABLE PA4 |
||||
|
#define LCD_PINS_RS PA5 |
||||
|
#define BTN_EN1 PB11 |
||||
|
#define BTN_EN2 PB0 |
||||
|
|
||||
|
// MKS MINI12864 and MKS LCD12864B; If using MKS LCD12864A (Need to remove RPK2 resistor)
|
||||
|
#if ENABLED(MKS_MINI_12864) |
||||
|
|
||||
|
#define LCD_BACKLIGHT_PIN -1 |
||||
|
#define LCD_RESET_PIN -1 |
||||
|
#define DOGLCD_A0 PC4 |
||||
|
#define DOGLCD_CS PA7 |
||||
|
#define DOGLCD_SCK PB13 |
||||
|
#define DOGLCD_MOSI PB15 |
||||
|
|
||||
|
// Required for MKS_MINI_12864 with this board
|
||||
|
#define MKS_LCD12864B |
||||
|
#undef SHOW_BOOTSCREEN |
||||
|
|
||||
|
#else // !MKS_MINI_12864
|
||||
|
|
||||
|
#define LCD_PINS_D4 PA6 |
||||
|
#if ENABLED(ULTIPANEL) |
||||
|
#define LCD_PINS_D5 PA7 |
||||
|
#define LCD_PINS_D6 PC4 |
||||
|
#define LCD_PINS_D7 PC5 |
||||
|
#endif |
||||
|
|
||||
|
#endif // !MKS_MINI_12864
|
||||
|
|
||||
|
#endif // HAS_SPI_LCD
|
||||
|
|
||||
|
//
|
||||
|
// SD Card
|
||||
|
//
|
||||
|
#define ENABLE_SPI2 |
||||
|
#define SD_DETECT_PIN PC10 |
||||
|
#define SCK_PIN PB13 |
||||
|
#define MISO_PIN PB14 |
||||
|
#define MOSI_PIN PB15 |
||||
|
#define SS_PIN PA15 |
||||
|
|
||||
|
#ifndef ST7920_DELAY_1 |
||||
|
#define ST7920_DELAY_1 DELAY_NS(125) |
||||
|
#endif |
||||
|
#ifndef ST7920_DELAY_2 |
||||
|
#define ST7920_DELAY_2 DELAY_NS(125) |
||||
|
#endif |
||||
|
#ifndef ST7920_DELAY_3 |
||||
|
#define ST7920_DELAY_3 DELAY_NS(125) |
||||
|
#endif |
||||
@ -0,0 +1,205 @@ |
|||||
|
/**
|
||||
|
* Marlin 3D Printer Firmware |
||||
|
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
|
* |
||||
|
* Based on Sprinter and grbl. |
||||
|
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm |
||||
|
* |
||||
|
* This program is free software: you can redistribute it and/or modify |
||||
|
* it under the terms of the GNU General Public License as published by |
||||
|
* the Free Software Foundation, either version 3 of the License, or |
||||
|
* (at your option) any later version. |
||||
|
* |
||||
|
* This program is distributed in the hope that it will be useful, |
||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
|
* GNU General Public License for more details. |
||||
|
* |
||||
|
* You should have received a copy of the GNU General Public License |
||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
|
* |
||||
|
*/ |
||||
|
#pragma once |
||||
|
|
||||
|
/**
|
||||
|
* MKS Robin E3D (STM32F103RCT6) board pin assignments |
||||
|
*/ |
||||
|
|
||||
|
#ifndef __STM32F1__ |
||||
|
#error "Oops! Select an STM32F1 board in 'Tools > Board.'" |
||||
|
#elif HOTENDS > 1 || E_STEPPERS > 1 |
||||
|
#error "MKS Robin E3D supports up to 1 hotends / E-steppers. Comment out this line to continue." |
||||
|
#endif |
||||
|
|
||||
|
#ifndef BOARD_INFO_NAME |
||||
|
#define BOARD_INFO_NAME "MKS Robin E3D" |
||||
|
#endif |
||||
|
#define BOARD_WEBSITE_URL "github.com/makerbase-mks" |
||||
|
|
||||
|
//#define DISABLE_DEBUG
|
||||
|
#define DISABLE_JTAG |
||||
|
#define ENABLE_SPI2 |
||||
|
|
||||
|
//
|
||||
|
// Servos
|
||||
|
//
|
||||
|
#define SERVO0_PIN PA3 |
||||
|
|
||||
|
//
|
||||
|
// Limit Switches
|
||||
|
//
|
||||
|
#define X_STOP_PIN PA12 |
||||
|
#define Y_STOP_PIN PA11 |
||||
|
#define Z_MIN_PIN PC6 |
||||
|
#define Z_MAX_PIN PB1 |
||||
|
|
||||
|
//
|
||||
|
// Steppers
|
||||
|
//
|
||||
|
#define X_STEP_PIN PC0 |
||||
|
#define X_DIR_PIN PB2 |
||||
|
#define X_ENABLE_PIN PC13 |
||||
|
#ifndef X_CS_PIN |
||||
|
#define X_CS_PIN PC7 |
||||
|
#endif |
||||
|
|
||||
|
#define Y_STEP_PIN PC2 |
||||
|
#define Y_DIR_PIN PB9 |
||||
|
#define Y_ENABLE_PIN PB12 |
||||
|
#ifndef Y_CS_PIN |
||||
|
#define Y_CS_PIN PD2 |
||||
|
#endif |
||||
|
|
||||
|
#define Z_STEP_PIN PB7 |
||||
|
#define Z_DIR_PIN PB6 |
||||
|
#define Z_ENABLE_PIN PB8 |
||||
|
#ifndef Z_CS_PIN |
||||
|
#define Z_CS_PIN PC12 |
||||
|
#endif |
||||
|
|
||||
|
#define E0_STEP_PIN PB4 |
||||
|
#define E0_DIR_PIN PB3 |
||||
|
#define E0_ENABLE_PIN PB5 |
||||
|
#ifndef E0_CS_PIN |
||||
|
#define E0_CS_PIN PC11 |
||||
|
#endif |
||||
|
|
||||
|
//
|
||||
|
// Software SPI pins for TMC2130 stepper drivers
|
||||
|
//
|
||||
|
#if ENABLED(TMC_USE_SW_SPI) |
||||
|
#ifndef TMC_SW_MOSI |
||||
|
#define TMC_SW_MOSI PB15 |
||||
|
#endif |
||||
|
#ifndef TMC_SW_MISO |
||||
|
#define TMC_SW_MISO PB14 |
||||
|
#endif |
||||
|
#ifndef TMC_SW_SCK |
||||
|
#define TMC_SW_SCK PB13 |
||||
|
#endif |
||||
|
#endif |
||||
|
|
||||
|
#if HAS_TMC220x |
||||
|
/**
|
||||
|
* TMC2208/TMC2209 stepper drivers |
||||
|
* |
||||
|
* Hardware serial communication ports. |
||||
|
* If undefined software serial is used according to the pins below |
||||
|
*/ |
||||
|
//#define X_HARDWARE_SERIAL Serial1
|
||||
|
//#define Y_HARDWARE_SERIAL Serial1
|
||||
|
//#define Z_HARDWARE_SERIAL Serial1
|
||||
|
//#define E0_HARDWARE_SERIAL Serial1
|
||||
|
|
||||
|
//
|
||||
|
// Software serial
|
||||
|
//
|
||||
|
#define X_SERIAL_TX_PIN PC7 |
||||
|
#define X_SERIAL_RX_PIN PC7 |
||||
|
|
||||
|
#define Y_SERIAL_TX_PIN PD2 |
||||
|
#define Y_SERIAL_RX_PIN PD2 |
||||
|
|
||||
|
#define Z_SERIAL_TX_PIN PC12 |
||||
|
#define Z_SERIAL_RX_PIN PC12 |
||||
|
|
||||
|
#define E0_SERIAL_TX_PIN PC11 |
||||
|
#define E0_SERIAL_RX_PIN PC11 |
||||
|
|
||||
|
// Reduce baud rate to improve software serial reliability
|
||||
|
#define TMC_BAUD_RATE 19200 |
||||
|
#endif |
||||
|
|
||||
|
//
|
||||
|
// Heaters 0,1 / Fans / Bed
|
||||
|
//
|
||||
|
#define HEATER_0_PIN PC9 |
||||
|
#define FAN_PIN PA8 |
||||
|
#define HEATER_BED_PIN PC8 |
||||
|
|
||||
|
//
|
||||
|
// Temperature Sensors
|
||||
|
//
|
||||
|
#define TEMP_BED_PIN PA1 //TB
|
||||
|
#define TEMP_0_PIN PA0 //TH1
|
||||
|
|
||||
|
#define FIL_RUNOUT_PIN PB10 // MT_DET
|
||||
|
|
||||
|
//
|
||||
|
// LCD Pins
|
||||
|
//
|
||||
|
#if HAS_SPI_LCD |
||||
|
|
||||
|
#define BEEPER_PIN PC1 |
||||
|
#define BTN_ENC PC3 |
||||
|
#define LCD_PINS_ENABLE PA4 |
||||
|
#define LCD_PINS_RS PA5 |
||||
|
#define BTN_EN1 PB11 |
||||
|
#define BTN_EN2 PB0 |
||||
|
|
||||
|
// MKS MINI12864 and MKS LCD12864B; If using MKS LCD12864A (Need to remove RPK2 resistor)
|
||||
|
#if ENABLED(MKS_MINI_12864) |
||||
|
|
||||
|
#define LCD_BACKLIGHT_PIN -1 |
||||
|
#define LCD_RESET_PIN -1 |
||||
|
#define DOGLCD_A0 PC4 |
||||
|
#define DOGLCD_CS PA7 |
||||
|
#define DOGLCD_SCK PB13 |
||||
|
#define DOGLCD_MOSI PB15 |
||||
|
|
||||
|
// Required for MKS_MINI_12864 with this board
|
||||
|
#define MKS_LCD12864B |
||||
|
#undef SHOW_BOOTSCREEN |
||||
|
|
||||
|
#else // !MKS_MINI_12864
|
||||
|
|
||||
|
#define LCD_PINS_D4 PA6 |
||||
|
#if ENABLED(ULTIPANEL) |
||||
|
#define LCD_PINS_D5 PA7 |
||||
|
#define LCD_PINS_D6 PC4 |
||||
|
#define LCD_PINS_D7 PC5 |
||||
|
#endif |
||||
|
|
||||
|
#endif // !MKS_MINI_12864
|
||||
|
|
||||
|
#endif // HAS_SPI_LCD
|
||||
|
|
||||
|
//
|
||||
|
// SD Card
|
||||
|
//
|
||||
|
#define ENABLE_SPI2 |
||||
|
#define SD_DETECT_PIN PC10 |
||||
|
#define SCK_PIN PB13 |
||||
|
#define MISO_PIN PB14 |
||||
|
#define MOSI_PIN PB15 |
||||
|
#define SS_PIN PA15 |
||||
|
|
||||
|
#ifndef ST7920_DELAY_1 |
||||
|
#define ST7920_DELAY_1 DELAY_NS(125) |
||||
|
#endif |
||||
|
#ifndef ST7920_DELAY_2 |
||||
|
#define ST7920_DELAY_2 DELAY_NS(125) |
||||
|
#endif |
||||
|
#ifndef ST7920_DELAY_3 |
||||
|
#define ST7920_DELAY_3 DELAY_NS(125) |
||||
|
#endif |
||||
@ -0,0 +1,14 @@ |
|||||
|
MEMORY |
||||
|
{ |
||||
|
ram (rwx) : ORIGIN = 0x20000000, LENGTH = 48K - 40 |
||||
|
rom (rx) : ORIGIN = 0x08005000, LENGTH = 256K - 20K |
||||
|
} |
||||
|
|
||||
|
/* Provide memory region aliases for common.inc */ |
||||
|
REGION_ALIAS("REGION_TEXT", rom); |
||||
|
REGION_ALIAS("REGION_DATA", ram); |
||||
|
REGION_ALIAS("REGION_BSS", ram); |
||||
|
REGION_ALIAS("REGION_RODATA", rom); |
||||
|
|
||||
|
/* Let common.inc handle the real work. */ |
||||
|
INCLUDE common.inc |
||||
@ -0,0 +1,40 @@ |
|||||
|
import os |
||||
|
Import("env") |
||||
|
|
||||
|
# Relocate firmware from 0x08000000 to 0x08005000 |
||||
|
for define in env['CPPDEFINES']: |
||||
|
if define[0] == "VECT_TAB_ADDR": |
||||
|
env['CPPDEFINES'].remove(define) |
||||
|
env['CPPDEFINES'].append(("VECT_TAB_ADDR", "0x08005000")) |
||||
|
|
||||
|
custom_ld_script = os.path.abspath("buildroot/share/PlatformIO/ldscripts/mks_robin_e3.ld") |
||||
|
for i, flag in enumerate(env["LINKFLAGS"]): |
||||
|
if "-Wl,-T" in flag: |
||||
|
env["LINKFLAGS"][i] = "-Wl,-T" + custom_ld_script |
||||
|
elif flag == "-T": |
||||
|
env["LINKFLAGS"][i + 1] = custom_ld_script |
||||
|
|
||||
|
|
||||
|
# Encrypt ${PROGNAME}.bin and save it as 'mksLite.bin' |
||||
|
def encrypt(source, target, env): |
||||
|
import sys |
||||
|
|
||||
|
key = [0xA3, 0xBD, 0xAD, 0x0D, 0x41, 0x11, 0xBB, 0x8D, 0xDC, 0x80, 0x2D, 0xD0, 0xD2, 0xC4, 0x9B, 0x1E, 0x26, 0xEB, 0xE3, 0x33, 0x4A, 0x15, 0xE4, 0x0A, 0xB3, 0xB1, 0x3C, 0x93, 0xBB, 0xAF, 0xF7, 0x3E] |
||||
|
|
||||
|
firmware = open(target[0].path, "rb") |
||||
|
robin = open(target[0].dir.path +'/Robin_e3.bin', "wb") |
||||
|
length = os.path.getsize(target[0].path) |
||||
|
position = 0 |
||||
|
try: |
||||
|
while position < length: |
||||
|
byte = firmware.read(1) |
||||
|
if position >= 320 and position < 31040: |
||||
|
byte = chr(ord(byte) ^ key[position & 31]) |
||||
|
if sys.version_info[0] > 2: |
||||
|
byte = bytes(byte, 'latin1') |
||||
|
robin.write(byte) |
||||
|
position += 1 |
||||
|
finally: |
||||
|
firmware.close() |
||||
|
robin.close() |
||||
|
env.AddPostAction("$BUILD_DIR/${PROGNAME}.bin", encrypt); |
||||
Loading…
Reference in new issue