Merge pull request #1853 from thinkyhead/dev_version

Set version to "1.0.3 dev"

Marlin/Configuration.h

@@ -40,7 +40,7 @@ Here are some standard links for getting your machine calibrated:
 // User-specified version info of this build to display in [Pronterface, etc] terminal window during
 // startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
 // build by the user have been successfully uploaded into firmware.
-#define STRING_VERSION "1.0.2"
+#define STRING_VERSION "1.0.3 dev"
 #define STRING_URL "reprap.org"
 #define STRING_VERSION_CONFIG_H __DATE__ " " __TIME__ // build date and time
 #define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.

Marlin/configurator/config/Configuration.h

@@ -40,7 +40,7 @@ Here are some standard links for getting your machine calibrated:
 // User-specified version info of this build to display in [Pronterface, etc] terminal window during
 // startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
 // build by the user have been successfully uploaded into firmware.
-#define STRING_VERSION "1.0.2"
+#define STRING_VERSION "1.0.3 dev"
 #define STRING_URL "reprap.org"
 #define STRING_VERSION_CONFIG_H __DATE__ " " __TIME__ // build date and time
 #define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.

Marlin/dogm_lcd_implementation.h

@@ -188,8 +188,8 @@ char lcd_printPGM(const char* str) {
 
 static bool show_splashscreen = true;
 
-static void lcd_implementation_init()
-{
+static void lcd_implementation_init() {
+
   #ifdef LCD_PIN_BL // Enable LCD backlight
     pinMode(LCD_PIN_BL, OUTPUT);
 	  digitalWrite(LCD_PIN_BL, HIGH);
@@ -308,7 +308,6 @@ static void lcd_implementation_status_screen() {
   #if HAS_FAN
     int per = ((fanSpeed + 1) * 100) / 256;
     if (per) {
-
       lcd_print(itostr3(per));
       lcd_print('%');
     }

Marlin/example_configurations/Felix/Configuration.h

@@ -38,7 +38,7 @@ Here are some standard links for getting your machine calibrated:
 // User-specified version info of this build to display in [Pronterface, etc] terminal window during
 // startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
 // build by the user have been successfully uploaded into firmware.
-#define STRING_VERSION "1.0.2"
+#define STRING_VERSION "1.0.3 dev"
 #define STRING_URL "reprap.org"
 #define STRING_VERSION_CONFIG_H __DATE__ " " __TIME__ // build date and time
 #define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.

Marlin/example_configurations/Felix/Configuration_DUAL.h

@@ -38,7 +38,7 @@ Here are some standard links for getting your machine calibrated:
 // User-specified version info of this build to display in [Pronterface, etc] terminal window during
 // startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
 // build by the user have been successfully uploaded into firmware.
-#define STRING_VERSION "1.0.2"
+#define STRING_VERSION "1.0.3 dev"
 #define STRING_URL "reprap.org"
 #define STRING_VERSION_CONFIG_H __DATE__ " " __TIME__ // build date and time
 #define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.

Marlin/example_configurations/Hephestos/Configuration.h

@@ -38,7 +38,7 @@ Here are some standard links for getting your machine calibrated:
 // User-specified version info of this build to display in [Pronterface, etc] terminal window during
 // startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
 // build by the user have been successfully uploaded into firmware.
-#define STRING_VERSION "1.0.2"
+#define STRING_VERSION "1.0.3 dev"
 #define STRING_URL "reprap.org"
 #define STRING_VERSION_CONFIG_H __DATE__ " " __TIME__ // build date and time
 #define STRING_CONFIG_H_AUTHOR "(bq Hephestos)" // Who made the changes.

Marlin/example_configurations/K8200/Configuration.h

@@ -38,7 +38,7 @@ Here are some standard links for getting your machine calibrated:
 // User-specified version info of this build to display in [Pronterface, etc] terminal window during
 // startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
 // build by the user have been successfully uploaded into firmware.
-#define STRING_VERSION "1.0.2"
+#define STRING_VERSION "1.0.3 dev"
 #define STRING_URL "reprap.org"
 #define STRING_VERSION_CONFIG_H __DATE__ " " __TIME__ // build date and time
 #define STRING_CONFIG_H_AUTHOR "(K8200, CONSULitAS)" // Who made the changes.

Marlin/example_configurations/SCARA/Configuration.h

@@ -56,7 +56,7 @@ Here are some standard links for getting your machine calibrated:
 // User-specified version info of this build to display in [Pronterface, etc] terminal window during
 // startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
 // build by the user have been successfully uploaded into firmware.
-#define STRING_VERSION "1.0.2"
+#define STRING_VERSION "1.0.3 dev"
 #define STRING_URL "reprap.org"
 #define STRING_VERSION_CONFIG_H __DATE__ " " __TIME__ // build date and time
 #define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.

Marlin/example_configurations/WITBOX/Configuration.h

@@ -38,7 +38,7 @@ Here are some standard links for getting your machine calibrated:
 // User-specified version info of this build to display in [Pronterface, etc] terminal window during
 // startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
 // build by the user have been successfully uploaded into firmware.
-#define STRING_VERSION "1.0.2"
+#define STRING_VERSION "1.0.3 dev"
 #define STRING_URL "reprap.org"
 #define STRING_VERSION_CONFIG_H __DATE__ " " __TIME__ // build date and time
 #define STRING_CONFIG_H_AUTHOR "(bq Witbox)" // Who made the changes.

Marlin/example_configurations/delta/generic/Configuration.h

@@ -38,7 +38,7 @@ Here are some standard links for getting your machine calibrated:
 // User-specified version info of this build to display in [Pronterface, etc] terminal window during
 // startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
 // build by the user have been successfully uploaded into firmware.
-#define STRING_VERSION "1.0.2"
+#define STRING_VERSION "1.0.3 dev"
 #define STRING_URL "reprap.org"
 #define STRING_VERSION_CONFIG_H __DATE__ " " __TIME__ // build date and time
 #define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.

Marlin/example_configurations/delta/kossel_mini/Configuration.h

@@ -38,7 +38,7 @@ Here are some standard links for getting your machine calibrated:
 // User-specified version info of this build to display in [Pronterface, etc] terminal window during
 // startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
 // build by the user have been successfully uploaded into firmware.
-#define STRING_VERSION "1.0.2"
+#define STRING_VERSION "1.0.3 dev"
 #define STRING_URL "reprap.org"
 #define STRING_VERSION_CONFIG_H __DATE__ " " __TIME__ // build date and time
 #define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.

Marlin/example_configurations/makibox/Configuration.h

@@ -38,7 +38,7 @@ Here are some standard links for getting your machine calibrated:
 // User-specified version info of this build to display in [Pronterface, etc] terminal window during
 // startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
 // build by the user have been successfully uploaded into firmware.
-#define STRING_VERSION "1.0.2"
+#define STRING_VERSION "1.0.3 dev"
 #define STRING_URL "reprap.org"
 #define STRING_VERSION_CONFIG_H __DATE__ " " __TIME__ // build date and time
 #define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.

Marlin/example_configurations/tvrrug/Round2/Configuration.h

@@ -38,7 +38,7 @@ Here are some standard links for getting your machine calibrated:
 // User-specified version info of this build to display in [Pronterface, etc] terminal window during
 // startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
 // build by the user have been successfully uploaded into firmware.
-#define STRING_VERSION "1.0.2"
+#define STRING_VERSION "1.0.3 dev"
 #define STRING_URL "reprap.org"
 #define STRING_VERSION_CONFIG_H __DATE__ " " __TIME__ // build date and time
 #define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.

Marlin/ultralcd.cpp

@@ -968,8 +968,7 @@ static void lcd_control_volumetric_menu() {
   static void lcd_set_contrast() {
     if (encoderPosition != 0) {
       lcd_contrast -= encoderPosition;
-    if (lcd_contrast < 0) lcd_contrast = 0;
-    else if (lcd_contrast > 63) lcd_contrast = 63;
+      lcd_contrast &= 0x3F;
       encoderPosition = 0;
       lcdDrawUpdate = 1;
       u8g.setContrast(lcd_contrast);
@@ -1003,10 +1002,12 @@ static void lcd_control_retract_menu() {
 #endif // FWRETRACT
 
 #if SDCARDDETECT == -1
+
   static void lcd_sd_refresh() {
     card.initsd();
     currentMenuViewOffset = 0;
   }
+
 #endif
 
 static void lcd_sd_updir() {
@@ -1031,11 +1032,12 @@ void lcd_sdcard_menu() {
 
   for (uint16_t i = 0; i < fileCnt; i++) {
     if (_menuItemNr == _lineNr) {
-      #ifndef SDCARD_RATHERRECENTFIRST
-        card.getfilename(i);
-      #else
-        card.getfilename(fileCnt-1-i);
+      card.getfilename(
+        #ifdef SDCARD_RATHERRECENTFIRST
+          fileCnt-1 -
         #endif
+        i
+      );
       if (card.filenameIsDir)
         MENU_ITEM(sddirectory, MSG_CARD_MENU, card.filename, card.longFilename);
       else
@@ -1458,7 +1460,7 @@ void lcd_reset_alert_level() { lcd_status_message_level = 0; }
 
 #ifdef DOGLCD
   void lcd_setcontrast(uint8_t value) {
-    lcd_contrast = value & 63;
+    lcd_contrast = value & 0x3F;
     u8g.setContrast(lcd_contrast);
   }
 #endif

Marlin/ultralcd_implementation_hitachi_HD44780.h

@@ -443,7 +443,7 @@ Possible status screens:
 
 20x4   |01234567890123456789|
        |T000/000D B000/000D |
-       |X+000.0 Y+000.0 Z+000.0|
+       |X000  Y000   Z000.00|
        |F100%  SD100% T--:--|
        |Status line.........|
 
@@ -453,18 +453,19 @@ Possible status screens:
        |F100%  SD100% T--:--|
        |Status line.........|
 */
-static void lcd_implementation_status_screen()
-{
+static void lcd_implementation_status_screen() {
   int tHotend = int(degHotend(0) + 0.5);
   int tTarget = int(degTargetHotend(0) + 0.5);
 
   #if LCD_WIDTH < 20
+
     lcd.setCursor(0, 0);
     lcd.print(itostr3(tHotend));
     lcd.print('/');
     lcd.print(itostr3left(tTarget));
 
     #if EXTRUDERS > 1 || TEMP_SENSOR_BED != 0
+
       // If we have an 2nd extruder or heated bed, show that in the top right corner
       lcd.setCursor(8, 0);
       #if EXTRUDERS > 1
@@ -479,17 +480,18 @@ static void lcd_implementation_status_screen()
       lcd.print(itostr3(tHotend));
       lcd.print('/');
       lcd.print(itostr3left(tTarget));
+
     #endif // EXTRUDERS > 1 || TEMP_SENSOR_BED != 0
 
   #else // LCD_WIDTH > 19
+
     lcd.setCursor(0, 0);
     lcd.print(LCD_STR_THERMOMETER[0]);
     lcd.print(itostr3(tHotend));
     lcd.print('/');
     lcd.print(itostr3left(tTarget));
     lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
-    if (tTarget < 10)
-        lcd.print(' ');
+    if (tTarget < 10) lcd.print(' ');
 
     #if EXTRUDERS > 1 || TEMP_SENSOR_BED != 0
       // If we have an 2nd extruder or heated bed, show that in the top right corner
@@ -507,9 +509,10 @@ static void lcd_implementation_status_screen()
       lcd.print('/');
       lcd.print(itostr3left(tTarget));
       lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
-    if (tTarget < 10)
-        lcd.print(' ');
+      if (tTarget < 10) lcd.print(' ');
+
     #endif  // EXTRUDERS > 1 || TEMP_SENSOR_BED != 0
+
   #endif // LCD_WIDTH > 19
 
   #if LCD_HEIGHT > 2
@@ -524,7 +527,9 @@ static void lcd_implementation_status_screen()
           lcd_printPGM(PSTR("---"));
           lcd.print('%');
       #endif // SDSUPPORT
+
     #else // LCD_WIDTH > 19
+
       #if EXTRUDERS > 1 && TEMP_SENSOR_BED != 0
         // If we both have a 2nd extruder and a heated bed, show the heated bed temp on the 2nd line on the left, as the first line is filled with extruder temps
         tHotend = int(degBed() + 0.5);
@@ -536,8 +541,7 @@ static void lcd_implementation_status_screen()
         lcd.print('/');
         lcd.print(itostr3left(tTarget));
         lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
-    if (tTarget < 10)
-        lcd.print(' ');
+        if (tTarget < 10) lcd.print(' ');
       #else
         lcd.setCursor(0,1);
         lcd.print('X');
@@ -545,19 +549,24 @@ static void lcd_implementation_status_screen()
         lcd_printPGM(PSTR("  Y"));
         lcd.print(ftostr3(current_position[Y_AXIS]));
       #endif // EXTRUDERS > 1 || TEMP_SENSOR_BED != 0
+
     #endif // LCD_WIDTH > 19
+
     lcd.setCursor(LCD_WIDTH - 8, 1);
     lcd.print('Z');
     lcd.print(ftostr32sp(current_position[Z_AXIS] + 0.00001));
+
   #endif // LCD_HEIGHT > 2
 
   #if LCD_HEIGHT > 3
+
     lcd.setCursor(0, 2);
     lcd.print(LCD_STR_FEEDRATE[0]);
     lcd.print(itostr3(feedmultiply));
     lcd.print('%');
-# if LCD_WIDTH > 19
-#  ifdef SDSUPPORT
+
+    #if LCD_WIDTH > 19 && defined(SDSUPPORT)
+
       lcd.setCursor(7, 2);
       lcd_printPGM(PSTR("SD"));
       if (IS_SD_PRINTING)
@@ -565,29 +574,33 @@ static void lcd_implementation_status_screen()
       else
         lcd_printPGM(PSTR("---"));
       lcd.print('%');
-#  endif//SDSUPPORT
-# endif//LCD_WIDTH > 19
+
+    #endif // LCD_WIDTH > 19 && SDSUPPORT
+
     lcd.setCursor(LCD_WIDTH - 6, 2);
     lcd.print(LCD_STR_CLOCK[0]);
-    if(starttime != 0)
-    {
+    if (starttime != 0) {
       uint16_t time = millis()/60000 - starttime/60000;
       lcd.print(itostr2(time/60));
       lcd.print(':');
       lcd.print(itostr2(time%60));
-    }else{
+    }
+    else {
       lcd_printPGM(PSTR("--:--"));
     }
-#endif
 
-  // Status message line at the bottom
+  #endif // LCD_HEIGHT > 3
+
+  /**
+   * Display Progress Bar, Filament display, and/or Status Message on the last line
+   */
+
   lcd.setCursor(0, LCD_HEIGHT - 1);
 
   #ifdef LCD_PROGRESS_BAR
 
     if (card.isFileOpen()) {
-      uint16_t mil = millis(), diff = mil - progressBarTick;
-      if (diff >= PROGRESS_BAR_MSG_TIME || !lcd_status_message[0]) {
+      if (millis() >= progressBarTick + PROGRESS_BAR_MSG_TIME || !lcd_status_message[0]) {
         // draw the progress bar
         int tix = (int)(card.percentDone() * LCD_WIDTH * 3) / 100,
           cel = tix / 3, rem = tix % 3, i = LCD_WIDTH;
@@ -605,11 +618,11 @@ static void lcd_implementation_status_screen()
       }
     } //card.isFileOpen
 
-  #endif //LCD_PROGRESS_BAR
+  #elif defined(FILAMENT_LCD_DISPLAY)
 
-  //Display both Status message line and Filament display on the last line
-  #ifdef FILAMENT_LCD_DISPLAY
-    if (message_millis + 5000 <= millis()) {  //display any status for the first 5 sec after screen is initiated
+    // Show Filament Diameter and Volumetric Multiplier %
+    // After allowing lcd_status_message to show for 5 seconds
+    if (millis() >= message_millis + 5000) {
       lcd_printPGM(PSTR("Dia "));
       lcd.print(ftostr12ns(filament_width_meas));
       lcd_printPGM(PSTR(" V"));
@@ -617,6 +630,7 @@ static void lcd_implementation_status_screen()
   	  lcd.print('%');
   	  return;
     }
+
   #endif // FILAMENT_LCD_DISPLAY
 
   lcd_print(lcd_status_message);