Browse Source

Comment, spacing cleanup

vanilla_fb_2.0.x
Scott Lahteine 4 years ago
parent
commit
b643a07b66
  1. 2
      Marlin/src/HAL/STM32/eeprom_flash.cpp
  2. 2
      Marlin/src/HAL/STM32/fast_pwm.cpp
  3. 6
      Marlin/src/HAL/STM32F1/watchdog.cpp
  4. 8
      Marlin/src/HAL/STM32F1/watchdog.h
  5. 2
      Marlin/src/gcode/control/M3-M5.cpp
  6. 5
      Marlin/src/inc/Conditionals_LCD.h
  7. 11
      Marlin/src/inc/SanityCheck.h
  8. 2
      Marlin/src/lcd/extui/lib/dgus/fysetc/DGUSDisplayDef.cpp
  9. 2
      Marlin/src/lcd/extui/lib/dgus/fysetc/DGUSDisplayDef.h
  10. 2
      Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h
  11. 6
      buildroot/share/PlatformIO/scripts/common-cxxflags.py

2
Marlin/src/HAL/STM32/eeprom_flash.cpp

@ -113,7 +113,7 @@ bool PersistentStore::access_start() {
// This must be the first time since power on that we have accessed the storage, or someone
// loaded and called write_data and never called access_finish.
// Lets go looking for the slot that holds our configuration.
if (eeprom_data_written) DEBUG_ECHOLN("Dangling EEPROM write_data");
if (eeprom_data_written) DEBUG_ECHOLNPGM("Dangling EEPROM write_data");
uint32_t address = FLASH_ADDRESS_START;
while (address <= FLASH_ADDRESS_END) {
uint32_t address_value = (*(__IO uint32_t*)address);

2
Marlin/src/HAL/STM32/fast_pwm.cpp

@ -32,7 +32,7 @@ void set_pwm_frequency(const pin_t pin, int f_desired) {
PinName pin_name = digitalPinToPinName(pin);
TIM_TypeDef *Instance = (TIM_TypeDef *)pinmap_peripheral(pin_name, PinMap_PWM); // Get HAL timer instance
LOOP_S_L_N(i, 0, NUM_HARDWARE_TIMERS) // Protect used timers
if (timer_instance[i] && timer_instance[i]->getHandle()->Instance == Instance)
return;

6
Marlin/src/HAL/STM32F1/watchdog.cpp

@ -34,9 +34,7 @@
#include "watchdog.h"
/**
* The watchdog clock is 40Khz. We need a 4 seconds interval, so use a /256 preescaler and
* 625 reload value (counts down to 0)
* use 1250 for 8 seconds
* The watchdog clock is 40Khz. So for a 4s or 8s interval use a /256 preescaler and 625 or 1250 reload value (counts down to 0).
*/
#define STM32F1_WD_RELOAD TERN(WATCHDOG_DURATION_8S, 1250, 625) // 4 or 8 second timeout
@ -56,7 +54,7 @@ void watchdogSetup() {
*
* @return No return
*
* @details The watchdog clock is 40Khz. We need a 4 seconds interval, so use a /256 preescaler and 625 reload value (counts down to 0)
* @details The watchdog clock is 40Khz. So for a 4s or 8s interval use a /256 preescaler and 625 or 1250 reload value (counts down to 0).
*/
void watchdog_init() {
#if DISABLED(DISABLE_WATCHDOG_INIT)

8
Marlin/src/HAL/STM32F1/watchdog.h

@ -27,11 +27,9 @@
#include <libmaple/iwdg.h>
// Arduino STM32F1 core now has watchdog support
// Initialize watchdog with a 4 second countdown time
// Initialize watchdog with a 4 or 8 second countdown time
void watchdog_init();
// Reset watchdog. MUST be called at least every 4 seconds after the
// first watchdog_init or STM32F1 will reset.
// Reset watchdog. MUST be called every 4 or 8 seconds after the
// first watchdog_init or the STM32F1 will reset.
void HAL_watchdog_refresh();

2
Marlin/src/gcode/control/M3-M5.cpp

@ -113,7 +113,7 @@ void GcodeSuite::M3_M4(const bool is_M4) {
else
cutter.set_power(cutter.upower_to_ocr(get_s_power()));
#elif ENABLED(SPINDLE_SERVO)
cutter.set_power(get_s_power());
cutter.set_power(get_s_power());
#else
cutter.set_enabled(true);
#endif

5
Marlin/src/inc/Conditionals_LCD.h

@ -675,6 +675,10 @@
#define HAS_BED_PROBE 1
#endif
#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
#undef PROBE_MANUALLY
#endif
#if ANY(HAS_BED_PROBE, PROBE_MANUALLY, MESH_BED_LEVELING)
#define PROBE_SELECTED 1
#endif
@ -747,6 +751,7 @@
#define HAS_PROBING_PROCEDURE 1
#endif
#if !HAS_LEVELING
#undef PROBE_MANUALLY
#undef RESTORE_LEVELING_AFTER_G28
#endif

11
Marlin/src/inc/SanityCheck.h

@ -1382,9 +1382,6 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
* Unified Bed Leveling
*/
// Hide PROBE_MANUALLY from the rest of the code
#undef PROBE_MANUALLY
#if IS_SCARA
#error "AUTO_BED_LEVELING_UBL does not yet support SCARA printers."
#elif DISABLED(EEPROM_SETTINGS)
@ -1410,13 +1407,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
#elif ENABLED(MESH_BED_LEVELING)
// Hide PROBE_MANUALLY from the rest of the code
#undef PROBE_MANUALLY
/**
* Mesh Bed Leveling
*/
// Mesh Bed Leveling
#if ENABLED(DELTA)
#error "MESH_BED_LEVELING is not compatible with DELTA printers."
#elif GRID_MAX_POINTS_X > 9 || GRID_MAX_POINTS_Y > 9

2
Marlin/src/lcd/extui/lib/dgus/fysetc/DGUSDisplayDef.cpp

@ -26,7 +26,7 @@
#if ENABLED(DGUS_LCD_UI_FYSETC)
#include "../DGUSDisplayDef.h"
#include "DGUSDisplayDef.h"
#include "../DGUSDisplay.h"
#include "../DGUSScreenHandler.h"

2
Marlin/src/lcd/extui/lib/dgus/fysetc/DGUSDisplayDef.h

@ -21,6 +21,8 @@
*/
#pragma once
#include "../DGUSDisplayDef.h"
enum DGUSLCD_Screens : uint8_t {
DGUSLCD_SCREEN_BOOT = 0,
DGUSLCD_SCREEN_MAIN = 1,

2
Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h

@ -256,7 +256,7 @@
* ----- -----
* LCD LCD
*/
#define LCD_PINS_RS P1_23
#define BTN_EN1 P1_20

6
buildroot/share/PlatformIO/scripts/common-cxxflags.py

@ -13,10 +13,10 @@ env.Append(CXXFLAGS=[
# Useful for JTAG debugging
#
# It will separe release and debug build folders.
# It useful when we need keep two live versions: one debug, for debugging,
# It will separe release and debug build folders.
# It useful when we need keep two live versions: one debug, for debugging,
# other release, for flashing.
# Without this, PIO will recompile everything twice for any small change.
#
#
if env.GetBuildType() == "debug":
env['BUILD_DIR'] = '$PROJECT_BUILD_DIR/$PIOENV/debug'

Loading…
Cancel
Save