Keith Bennett
4 years ago
committed by
Scott Lahteine
Scott Lahteine
13 changed files with 578 additions and 527 deletions
@ -0,0 +1,26 @@ |
|||||
|
/**
|
||||
|
* Marlin 3D Printer Firmware |
||||
|
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
|
* |
||||
|
* Based on Sprinter and grbl. |
||||
|
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm |
||||
|
* |
||||
|
* This program is free software: you can redistribute it and/or modify |
||||
|
* it under the terms of the GNU General Public License as published by |
||||
|
* the Free Software Foundation, either version 3 of the License, or |
||||
|
* (at your option) any later version. |
||||
|
* |
||||
|
* This program is distributed in the hope that it will be useful, |
||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
|
* GNU General Public License for more details. |
||||
|
* |
||||
|
* You should have received a copy of the GNU General Public License |
||||
|
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
|
* |
||||
|
*/ |
||||
|
#pragma once |
||||
|
|
||||
|
#define BOARD_INFO_NAME "BTT OCTOPUS V1.1" |
||||
|
|
||||
|
#include "pins_BTT_OCTOPUS_V1_common.h" |
||||
@ -0,0 +1,526 @@ |
|||||
|
/**
|
||||
|
* Marlin 3D Printer Firmware |
||||
|
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
|
* |
||||
|
* Based on Sprinter and grbl. |
||||
|
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm |
||||
|
* |
||||
|
* This program is free software: you can redistribute it and/or modify |
||||
|
* it under the terms of the GNU General Public License as published by |
||||
|
* the Free Software Foundation, either version 3 of the License, or |
||||
|
* (at your option) any later version. |
||||
|
* |
||||
|
* This program is distributed in the hope that it will be useful, |
||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
|
* GNU General Public License for more details. |
||||
|
* |
||||
|
* You should have received a copy of the GNU General Public License |
||||
|
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
|
* |
||||
|
*/ |
||||
|
#pragma once |
||||
|
|
||||
|
#include "env_validate.h" |
||||
|
|
||||
|
// Onboard I2C EEPROM
|
||||
|
#define I2C_EEPROM |
||||
|
#define MARLIN_EEPROM_SIZE 0x8000 // 32KB (24C32A)
|
||||
|
#define I2C_SCL_PIN PB8 |
||||
|
#define I2C_SDA_PIN PB9 |
||||
|
|
||||
|
// USB Flash Drive support
|
||||
|
#define HAS_OTG_USB_HOST_SUPPORT |
||||
|
|
||||
|
// Avoid conflict with TIMER_TONE
|
||||
|
#define STEP_TIMER 10 |
||||
|
|
||||
|
//
|
||||
|
// Servos
|
||||
|
#define SERVO0_PIN PB6 |
||||
|
|
||||
|
//
|
||||
|
// Misc. Functions
|
||||
|
//
|
||||
|
#define LED_PIN PA13 |
||||
|
|
||||
|
//
|
||||
|
// Trinamic Stallguard pins
|
||||
|
//
|
||||
|
#define X_DIAG_PIN PG6 // X-STOP
|
||||
|
#define Y_DIAG_PIN PG9 // Y-STOP
|
||||
|
#define Z_DIAG_PIN PG10 // Z-STOP
|
||||
|
#define Z2_DIAG_PIN PG11 // Z2-STOP
|
||||
|
#define E0_DIAG_PIN PG12 // E0DET
|
||||
|
#define E1_DIAG_PIN PG13 // E1DET
|
||||
|
#define E2_DIAG_PIN PG14 // E2DET
|
||||
|
#define E3_DIAG_PIN PG15 // E3DET
|
||||
|
|
||||
|
// Z Probe (when not Z_MIN_PIN)
|
||||
|
//
|
||||
|
#ifndef Z_MIN_PROBE_PIN |
||||
|
#define Z_MIN_PROBE_PIN PB7 |
||||
|
#endif |
||||
|
|
||||
|
//
|
||||
|
// Limit Switches
|
||||
|
//
|
||||
|
#ifdef X_STALL_SENSITIVITY |
||||
|
#define X_STOP_PIN X_DIAG_PIN |
||||
|
#if X_HOME_TO_MIN |
||||
|
#define X_MAX_PIN E0_DIAG_PIN // E0DET
|
||||
|
#else |
||||
|
#define X_MIN_PIN E0_DIAG_PIN // E0DET
|
||||
|
#endif |
||||
|
#elif ENABLED(X_DUAL_ENDSTOPS) |
||||
|
#ifndef X_MIN_PIN |
||||
|
#define X_MIN_PIN X_DIAG_PIN // X-STOP
|
||||
|
#endif |
||||
|
#ifndef X_MAX_PIN |
||||
|
#define X_MAX_PIN E0_DIAG_PIN // E0DET
|
||||
|
#endif |
||||
|
#else |
||||
|
#define X_STOP_PIN X_DIAG_PIN // X-STOP
|
||||
|
#endif |
||||
|
|
||||
|
#ifdef Y_STALL_SENSITIVITY |
||||
|
#define Y_STOP_PIN Y_DIAG_PIN |
||||
|
#if Y_HOME_TO_MIN |
||||
|
#define Y_MAX_PIN E1_DIAG_PIN // E1DET
|
||||
|
#else |
||||
|
#define Y_MIN_PIN E1_DIAG_PIN // E1DET
|
||||
|
#endif |
||||
|
#elif ENABLED(Y_DUAL_ENDSTOPS) |
||||
|
#ifndef Y_MIN_PIN |
||||
|
#define Y_MIN_PIN Y_DIAG_PIN // Y-STOP
|
||||
|
#endif |
||||
|
#ifndef Y_MAX_PIN |
||||
|
#define Y_MAX_PIN E1_DIAG_PIN // E1DET
|
||||
|
#endif |
||||
|
#else |
||||
|
#define Y_STOP_PIN Y_DIAG_PIN // Y-STOP
|
||||
|
#endif |
||||
|
|
||||
|
#ifdef Z_STALL_SENSITIVITY |
||||
|
#define Z_STOP_PIN Z_DIAG_PIN |
||||
|
#if Z_HOME_TO_MIN |
||||
|
#define Z_MAX_PIN E2_DIAG_PIN // PWRDET
|
||||
|
#else |
||||
|
#define Z_MIN_PIN E2_DIAG_PIN // PWRDET
|
||||
|
#endif |
||||
|
#elif ENABLED(Z_MULTI_ENDSTOPS) |
||||
|
#ifndef Z_MIN_PIN |
||||
|
#define Z_MIN_PIN Z_DIAG_PIN // Z-STOP
|
||||
|
#endif |
||||
|
#ifndef Z_MAX_PIN |
||||
|
#define Z_MAX_PIN E2_DIAG_PIN // PWRDET
|
||||
|
#endif |
||||
|
#else |
||||
|
#define Z_STOP_PIN Z_DIAG_PIN // Z-STOP
|
||||
|
#endif |
||||
|
|
||||
|
//
|
||||
|
// Filament Runout Sensor
|
||||
|
//
|
||||
|
#define FIL_RUNOUT_PIN PG12 // E0DET
|
||||
|
#define FIL_RUNOUT2_PIN PG13 // E1DET
|
||||
|
#define FIL_RUNOUT3_PIN PG14 // E2DET
|
||||
|
#define FIL_RUNOUT4_PIN PG15 // E3DET
|
||||
|
|
||||
|
//
|
||||
|
// Power Supply Control
|
||||
|
//
|
||||
|
#ifndef PS_ON_PIN |
||||
|
#define PS_ON_PIN PE11 // PS-ON
|
||||
|
#endif |
||||
|
|
||||
|
//
|
||||
|
// Power Loss Detection
|
||||
|
//
|
||||
|
#ifndef POWER_LOSS_PIN |
||||
|
#define POWER_LOSS_PIN PC0 // PWRDET
|
||||
|
#endif |
||||
|
|
||||
|
//
|
||||
|
// NeoPixel LED
|
||||
|
//
|
||||
|
#ifndef NEOPIXEL_PIN |
||||
|
#define NEOPIXEL_PIN PB0 |
||||
|
#endif |
||||
|
|
||||
|
//
|
||||
|
// Steppers
|
||||
|
//
|
||||
|
#define X_STEP_PIN PF13 // MOTOR 0
|
||||
|
#define X_DIR_PIN PF12 |
||||
|
#define X_ENABLE_PIN PF14 |
||||
|
#ifndef X_CS_PIN |
||||
|
#define X_CS_PIN PC4 |
||||
|
#endif |
||||
|
|
||||
|
#define Y_STEP_PIN PG0 // MOTOR 1
|
||||
|
#define Y_DIR_PIN PG1 |
||||
|
#define Y_ENABLE_PIN PF15 |
||||
|
#ifndef Y_CS_PIN |
||||
|
#define Y_CS_PIN PD11 |
||||
|
#endif |
||||
|
|
||||
|
#define Z_STEP_PIN PF11 // MOTOR 2
|
||||
|
#define Z_DIR_PIN PG3 |
||||
|
#define Z_ENABLE_PIN PG5 |
||||
|
#ifndef Z_CS_PIN |
||||
|
#define Z_CS_PIN PC6 |
||||
|
#endif |
||||
|
|
||||
|
#define Z2_STEP_PIN PG4 // MOTOR 3
|
||||
|
#define Z2_DIR_PIN PC1 |
||||
|
#define Z2_ENABLE_PIN PA0 |
||||
|
#ifndef Z2_CS_PIN |
||||
|
#define Z2_CS_PIN PC7 |
||||
|
#endif |
||||
|
|
||||
|
#define E0_STEP_PIN PF9 // MOTOR 4
|
||||
|
#define E0_DIR_PIN PF10 |
||||
|
#define E0_ENABLE_PIN PG2 |
||||
|
#ifndef E0_CS_PIN |
||||
|
#define E0_CS_PIN PF2 |
||||
|
#endif |
||||
|
|
||||
|
#define E1_STEP_PIN PC13 // MOTOR 5
|
||||
|
#define E1_DIR_PIN PF0 |
||||
|
#define E1_ENABLE_PIN PF1 |
||||
|
#ifndef E1_CS_PIN |
||||
|
#define E1_CS_PIN PE4 |
||||
|
#endif |
||||
|
|
||||
|
#define E2_STEP_PIN PE2 // MOTOR 6
|
||||
|
#define E2_DIR_PIN PE3 |
||||
|
#define E2_ENABLE_PIN PD4 |
||||
|
#ifndef E2_CS_PIN |
||||
|
|
||||
|
#define E2_CS_PIN PE1 |
||||
|
#endif |
||||
|
|
||||
|
#define E3_STEP_PIN PE6 // MOTOR 7
|
||||
|
#define E3_DIR_PIN PA14 |
||||
|
#define E3_ENABLE_PIN PE0 |
||||
|
#ifndef E3_CS_PIN |
||||
|
#define E3_CS_PIN PD3 |
||||
|
#endif |
||||
|
|
||||
|
//
|
||||
|
// Temperature Sensors
|
||||
|
//
|
||||
|
#define TEMP_BED_PIN PF3 // TB
|
||||
|
#if TEMP_SENSOR_0 == 20 |
||||
|
#define TEMP_0_PIN PF8 // PT100 Connector
|
||||
|
#else |
||||
|
#define TEMP_0_PIN PF4 // TH0
|
||||
|
#endif |
||||
|
#define TEMP_1_PIN PF5 // TH1
|
||||
|
#define TEMP_2_PIN PF6 // TH2
|
||||
|
#define TEMP_3_PIN PF7 // TH3
|
||||
|
|
||||
|
//
|
||||
|
// Heaters / Fans
|
||||
|
//
|
||||
|
#define HEATER_BED_PIN PA1 // Hotbed
|
||||
|
#define HEATER_0_PIN PA2 // Heater0
|
||||
|
#define HEATER_1_PIN PA3 // Heater1
|
||||
|
#define HEATER_2_PIN PB10 // Heater2
|
||||
|
#define HEATER_3_PIN PB11 // Heater3
|
||||
|
|
||||
|
#define FAN_PIN PA8 // Fan0
|
||||
|
#define FAN1_PIN PE5 // Fan1
|
||||
|
#define FAN2_PIN PD12 // Fan2
|
||||
|
#define FAN3_PIN PD13 // Fan3
|
||||
|
#define FAN4_PIN PD14 // Fan4
|
||||
|
#define FAN5_PIN PD15 // Fan5
|
||||
|
|
||||
|
//
|
||||
|
// SD Support
|
||||
|
//
|
||||
|
#ifndef SDCARD_CONNECTION |
||||
|
#if HAS_WIRED_LCD |
||||
|
#define SDCARD_CONNECTION LCD |
||||
|
#else |
||||
|
#define SDCARD_CONNECTION ONBOARD |
||||
|
#endif |
||||
|
#endif |
||||
|
|
||||
|
//
|
||||
|
// Software SPI pins for TMC2130 stepper drivers
|
||||
|
//
|
||||
|
#if ENABLED(TMC_USE_SW_SPI) |
||||
|
#ifndef TMC_SW_MOSI |
||||
|
#define TMC_SW_MOSI PA7 |
||||
|
#endif |
||||
|
#ifndef TMC_SW_MISO |
||||
|
#define TMC_SW_MISO PA6 |
||||
|
#endif |
||||
|
#ifndef TMC_SW_SCK |
||||
|
#define TMC_SW_SCK PA5 |
||||
|
#endif |
||||
|
#endif |
||||
|
|
||||
|
#if HAS_TMC_UART |
||||
|
/**
|
||||
|
* TMC2208/TMC2209 stepper drivers |
||||
|
* |
||||
|
* Hardware serial communication ports. |
||||
|
* If undefined software serial is used according to the pins below |
||||
|
*/ |
||||
|
//#define X_HARDWARE_SERIAL Serial1
|
||||
|
//#define X2_HARDWARE_SERIAL Serial1
|
||||
|
//#define Y_HARDWARE_SERIAL Serial1
|
||||
|
//#define Y2_HARDWARE_SERIAL Serial1
|
||||
|
//#define Z_HARDWARE_SERIAL Serial1
|
||||
|
//#define Z2_HARDWARE_SERIAL Serial1
|
||||
|
//#define E0_HARDWARE_SERIAL Serial1
|
||||
|
//#define E1_HARDWARE_SERIAL Serial1
|
||||
|
//#define E2_HARDWARE_SERIAL Serial1
|
||||
|
//#define E3_HARDWARE_SERIAL Serial1
|
||||
|
//#define E4_HARDWARE_SERIAL Serial1
|
||||
|
|
||||
|
//
|
||||
|
// Software serial
|
||||
|
//
|
||||
|
#define X_SERIAL_TX_PIN PC4 |
||||
|
#define X_SERIAL_RX_PIN PC4 |
||||
|
|
||||
|
#define Y_SERIAL_TX_PIN PD11 |
||||
|
#define Y_SERIAL_RX_PIN PD11 |
||||
|
|
||||
|
#define Z_SERIAL_TX_PIN PC6 |
||||
|
#define Z_SERIAL_RX_PIN PC6 |
||||
|
|
||||
|
#define Z2_SERIAL_TX_PIN PC7 |
||||
|
#define Z2_SERIAL_RX_PIN PC7 |
||||
|
|
||||
|
#define E0_SERIAL_TX_PIN PF2 |
||||
|
#define E0_SERIAL_RX_PIN PF2 |
||||
|
|
||||
|
#define E1_SERIAL_TX_PIN PE4 |
||||
|
#define E1_SERIAL_RX_PIN PE4 |
||||
|
|
||||
|
#define E2_SERIAL_TX_PIN PE1 |
||||
|
#define E2_SERIAL_RX_PIN PE1 |
||||
|
|
||||
|
#define E3_SERIAL_TX_PIN PD3 |
||||
|
#define E3_SERIAL_RX_PIN PD3 |
||||
|
|
||||
|
// Reduce baud rate to improve software serial reliability
|
||||
|
#define TMC_BAUD_RATE 19200 |
||||
|
#endif |
||||
|
|
||||
|
/**
|
||||
|
* ______ ______ |
||||
|
* NC | 1 2 | GND 5V | 1 2 | GND |
||||
|
* RESET | 3 4 | PC15 (SD_DETECT) (LCD_D7) PE15 | 3 4 | PE14 (LCD_D6) |
||||
|
* (MOSI) PA7 | 5 6 PB1 (BTN_EN2) (LCD_D5) PE13 | 5 6 PE12 (LCD_D4) |
||||
|
* (SD_SS) PA4 | 7 8 | PB2 (BTN_EN1) (LCD_RS) PE10 | 7 8 | PE9 (LCD_EN) |
||||
|
* (SCK) PA5 | 9 10 | PA6 (MISO) (BTN_ENC) PE7 | 9 10 | PE8 (BEEPER) |
||||
|
* ------ ----- |
||||
|
* EXP2 EXP1 |
||||
|
*/ |
||||
|
|
||||
|
#define EXP1_03_PIN PE15 |
||||
|
#define EXP1_04_PIN PE14 |
||||
|
#define EXP1_05_PIN PE13 |
||||
|
#define EXP1_06_PIN PE12 |
||||
|
#define EXP1_07_PIN PE10 |
||||
|
#define EXP1_08_PIN PE9 |
||||
|
#define EXP1_09_PIN PE7 |
||||
|
#define EXP1_10_PIN PE8 |
||||
|
|
||||
|
#define EXP2_03_PIN -1 |
||||
|
#define EXP2_04_PIN PC15 |
||||
|
#define EXP2_05_PIN PA7 |
||||
|
#define EXP2_06_PIN PB2 |
||||
|
#define EXP2_07_PIN PA4 |
||||
|
#define EXP2_08_PIN PB1 |
||||
|
#define EXP2_09_PIN PA5 |
||||
|
#define EXP2_10_PIN PA6 |
||||
|
|
||||
|
//
|
||||
|
// Onboard SD card
|
||||
|
// Must use soft SPI because Marlin's default hardware SPI is tied to LCD's EXP2
|
||||
|
//
|
||||
|
#if SD_CONNECTION_IS(ONBOARD) |
||||
|
#define SDIO_SUPPORT // Use SDIO for onboard SD
|
||||
|
#ifndef SD_DETECT_STATE |
||||
|
#define SD_DETECT_STATE HIGH |
||||
|
#elif SD_DETECT_STATE == LOW |
||||
|
#error "BOARD_BTT_OCTOPUS_V1_0 onboard SD requires SD_DETECT_STATE set to HIGH." |
||||
|
#endif |
||||
|
#define SD_DETECT_PIN PC14 |
||||
|
#elif SD_CONNECTION_IS(LCD) |
||||
|
|
||||
|
#define CUSTOM_SPI_PINS |
||||
|
#define SDSS PA4 |
||||
|
#define SD_SS_PIN SDSS |
||||
|
#define SD_SCK_PIN PA5 |
||||
|
#define SD_MISO_PIN PA6 |
||||
|
#define SD_MOSI_PIN PA7 |
||||
|
#define SD_DETECT_PIN PC15 |
||||
|
|
||||
|
#elif SD_CONNECTION_IS(CUSTOM_CABLE) |
||||
|
#error "CUSTOM_CABLE is not a supported SDCARD_CONNECTION for this board" |
||||
|
#endif |
||||
|
|
||||
|
#if ENABLED(BTT_MOTOR_EXPANSION) |
||||
|
/**
|
||||
|
* ______ ______ |
||||
|
* NC | 1 2 | GND NC | 1 2 | GND |
||||
|
* NC | 3 4 | M1EN M2EN | 3 4 | M3EN |
||||
|
* M1STP | 5 6 M1DIR M1RX | 5 6 M1DIAG |
||||
|
* M2DIR | 7 8 | M2STP M2RX | 7 8 | M2DIAG |
||||
|
* M3DIR | 9 10 | M3STP M3RX | 9 10 | M3DIAG |
||||
|
* ------ ------ |
||||
|
* EXP2 EXP1 |
||||
|
*/ |
||||
|
|
||||
|
// M1 on Driver Expansion Module
|
||||
|
#define E4_STEP_PIN EXP2_05_PIN |
||||
|
#define E4_DIR_PIN EXP2_06_PIN |
||||
|
#define E4_ENABLE_PIN EXP2_04_PIN |
||||
|
#define E4_DIAG_PIN EXP1_06_PIN |
||||
|
#define E4_CS_PIN EXP1_05_PIN |
||||
|
#if HAS_TMC_UART |
||||
|
#define E4_SERIAL_TX_PIN EXP1_05_PIN |
||||
|
#define E4_SERIAL_RX_PIN EXP1_05_PIN |
||||
|
#endif |
||||
|
|
||||
|
// M2 on Driver Expansion Module
|
||||
|
#define E5_STEP_PIN EXP2_08_PIN |
||||
|
#define E5_DIR_PIN EXP2_07_PIN |
||||
|
#define E5_ENABLE_PIN EXP1_03_PIN |
||||
|
#define E5_DIAG_PIN EXP1_08_PIN |
||||
|
#define E5_CS_PIN EXP1_07_PIN |
||||
|
#if HAS_TMC_UART |
||||
|
#define E5_SERIAL_TX_PIN EXP1_07_PIN |
||||
|
#define E5_SERIAL_RX_PIN EXP1_07_PIN |
||||
|
#endif |
||||
|
|
||||
|
// M3 on Driver Expansion Module
|
||||
|
#define E6_STEP_PIN EXP2_10_PIN |
||||
|
#define E6_DIR_PIN EXP2_09_PIN |
||||
|
#define E6_ENABLE_PIN EXP1_04_PIN |
||||
|
#define E6_DIAG_PIN EXP1_10_PIN |
||||
|
#define E6_CS_PIN EXP1_09_PIN |
||||
|
#if HAS_TMC_UART |
||||
|
#define E6_SERIAL_TX_PIN EXP1_09_PIN |
||||
|
#define E6_SERIAL_RX_PIN EXP1_09_PIN |
||||
|
#endif |
||||
|
|
||||
|
#endif // BTT_MOTOR_EXPANSION
|
||||
|
|
||||
|
//
|
||||
|
// LCDs and Controllers
|
||||
|
//
|
||||
|
#if IS_TFTGLCD_PANEL |
||||
|
|
||||
|
#if ENABLED(TFTGLCD_PANEL_SPI) |
||||
|
#define TFTGLCD_CS EXP2_08_PIN |
||||
|
#endif |
||||
|
|
||||
|
#elif HAS_WIRED_LCD |
||||
|
|
||||
|
#define BEEPER_PIN EXP1_10_PIN |
||||
|
#define BTN_ENC EXP1_09_PIN |
||||
|
|
||||
|
#if ENABLED(CR10_STOCKDISPLAY) |
||||
|
|
||||
|
#define LCD_PINS_RS EXP1_04_PIN |
||||
|
|
||||
|
#define BTN_EN1 EXP1_08_PIN |
||||
|
#define BTN_EN2 EXP1_06_PIN |
||||
|
|
||||
|
#define LCD_PINS_ENABLE EXP1_03_PIN |
||||
|
#define LCD_PINS_D4 EXP1_05_PIN |
||||
|
|
||||
|
// CR10_STOCKDISPLAY default timing is too fast
|
||||
|
#undef BOARD_ST7920_DELAY_1 |
||||
|
#undef BOARD_ST7920_DELAY_2 |
||||
|
#undef BOARD_ST7920_DELAY_3 |
||||
|
|
||||
|
#else |
||||
|
|
||||
|
#define LCD_PINS_RS EXP1_07_PIN |
||||
|
|
||||
|
#define BTN_EN1 EXP2_08_PIN |
||||
|
#define BTN_EN2 EXP2_06_PIN |
||||
|
|
||||
|
#define LCD_PINS_ENABLE EXP1_08_PIN |
||||
|
#define LCD_PINS_D4 EXP1_06_PIN |
||||
|
|
||||
|
#if ENABLED(FYSETC_MINI_12864) |
||||
|
#define DOGLCD_CS EXP1_08_PIN |
||||
|
#define DOGLCD_A0 EXP1_07_PIN |
||||
|
//#define LCD_BACKLIGHT_PIN -1
|
||||
|
#define LCD_RESET_PIN EXP1_06_PIN // Must be high or open for LCD to operate normally.
|
||||
|
#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0) |
||||
|
#ifndef RGB_LED_R_PIN |
||||
|
#define RGB_LED_R_PIN EXP1_05_PIN |
||||
|
#endif |
||||
|
#ifndef RGB_LED_G_PIN |
||||
|
#define RGB_LED_G_PIN EXP1_04_PIN |
||||
|
#endif |
||||
|
#ifndef RGB_LED_B_PIN |
||||
|
#define RGB_LED_B_PIN EXP1_03_PIN |
||||
|
#endif |
||||
|
#elif ENABLED(FYSETC_MINI_12864_2_1) |
||||
|
#define NEOPIXEL_PIN EXP1_05_PIN |
||||
|
#endif |
||||
|
#endif // !FYSETC_MINI_12864
|
||||
|
|
||||
|
#if IS_ULTIPANEL |
||||
|
#define LCD_PINS_D5 EXP1_05_PIN |
||||
|
#define LCD_PINS_D6 EXP1_04_PIN |
||||
|
#define LCD_PINS_D7 EXP1_03_PIN |
||||
|
|
||||
|
#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) |
||||
|
#define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder
|
||||
|
#endif |
||||
|
|
||||
|
#endif |
||||
|
|
||||
|
#endif |
||||
|
#endif // HAS_WIRED_LCD
|
||||
|
|
||||
|
// Alter timing for graphical display
|
||||
|
#if HAS_MARLINUI_U8GLIB |
||||
|
#ifndef BOARD_ST7920_DELAY_1 |
||||
|
#define BOARD_ST7920_DELAY_1 DELAY_NS(120) // DELAY_NS(96)
|
||||
|
#endif |
||||
|
#ifndef BOARD_ST7920_DELAY_2 |
||||
|
#define BOARD_ST7920_DELAY_2 DELAY_NS(80) // DELAY_NS(48)
|
||||
|
#endif |
||||
|
#ifndef BOARD_ST7920_DELAY_3 |
||||
|
#define BOARD_ST7920_DELAY_3 DELAY_NS(580) // DELAY_NS(600)
|
||||
|
#endif |
||||
|
#endif |
||||
|
|
||||
|
//
|
||||
|
// WIFI
|
||||
|
//
|
||||
|
|
||||
|
/**
|
||||
|
* ------- |
||||
|
* GND | 9 | | 8 | 3.3V |
||||
|
* (ESP-CS) PB12 | 10 | | 7 | PB15 (ESP-MOSI) |
||||
|
* 3.3V | 11 | | 6 | PB14 (ESP-MISO) |
||||
|
* (ESP-IO0) PD7 | 12 | | 5 | PB13 (ESP-CLK) |
||||
|
* (ESP-IO4) PD10 | 13 | | 4 | NC |
||||
|
* NC | 14 | | 3 | PE15 (ESP-EN) |
||||
|
* (ESP-RX) PD8 | 15 | | 2 | NC |
||||
|
* (ESP-TX) PD9 | 16 | | 1 | PE14 (ESP-RST) |
||||
|
* ------- |
||||
|
* WIFI |
||||
|
*/ |
||||
|
#define ESP_WIFI_MODULE_COM 3 // Must also set either SERIAL_PORT or SERIAL_PORT_2 to this
|
||||
|
#define ESP_WIFI_MODULE_BAUDRATE BAUDRATE // Must use same BAUDRATE as SERIAL_PORT & SERIAL_PORT_2
|
||||
|
#define ESP_WIFI_MODULE_RESET_PIN PG7 |
||||
|
#define ESP_WIFI_MODULE_ENABLE_PIN PG8 |
||||
|
#define ESP_WIFI_MODULE_GPIO0_PIN PD7 |
||||
|
#define ESP_WIFI_MODULE_GPIO4_PIN PD10 |
||||
Loading…
Reference in new issue