andrey
/
Marlin_FB4S
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

Edit digipot currents via LCD, save to EEPROM

pull/1/head
dot-bob 8 years ago
committed by Scott Lahteine
parent
3c7bfe798d
commit
b3c36c98fd
6 changed files with 164 additions and 51 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Unified View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 72
      Marlin/configuration_store.cpp
  2. 4
      Marlin/pins_MINIRAMBO.h
  3. 4
      Marlin/pins_ULTIMAIN_2.h
  4. 77
      Marlin/stepper.cpp
  5. 20
      Marlin/stepper.h
  6. 24
      Marlin/ultralcd.cpp

72
Marlin/configuration_store.cpp
View File

@ -36,13 +36,13 @@
* *
*/ */
#define EEPROM_VERSION "V38" #define EEPROM_VERSION "V39"
// Change EEPROM version if these are changed: // Change EEPROM version if these are changed:
#define EEPROM_OFFSET 100 #define EEPROM_OFFSET 100
/** /**
* V38 EEPROM Layout: * V39 EEPROM Layout:
* *
* 100 Version (char x4) * 100 Version (char x4)
* 104 EEPROM CRC16 (uint16_t) * 104 EEPROM CRC16 (uint16_t)
@ -140,24 +140,29 @@
* 534 M200 T D filament_size (float x5) (T0..3) * 534 M200 T D filament_size (float x5) (T0..3)
* *
* HAVE_TMC2130: 20 bytes * HAVE_TMC2130: 20 bytes
* 554 M906 X stepperX current (uint16_t) * 554 M906 X Stepper X current (uint16_t)
* 556 M906 Y stepperY current (uint16_t) * 556 M906 Y Stepper Y current (uint16_t)
* 558 M906 Z stepperZ current (uint16_t) * 558 M906 Z Stepper Z current (uint16_t)
* 560 M906 X2 stepperX2 current (uint16_t) * 560 M906 X2 Stepper X2 current (uint16_t)
* 562 M906 Y2 stepperY2 current (uint16_t) * 562 M906 Y2 Stepper Y2 current (uint16_t)
* 564 M906 Z2 stepperZ2 current (uint16_t) * 564 M906 Z2 Stepper Z2 current (uint16_t)
* 566 M906 E0 stepperE0 current (uint16_t) * 566 M906 E0 Stepper E0 current (uint16_t)
* 568 M906 E1 stepperE1 current (uint16_t) * 568 M906 E1 Stepper E1 current (uint16_t)
* 570 M906 E2 stepperE2 current (uint16_t) * 570 M906 E2 Stepper E2 current (uint16_t)
* 572 M906 E3 stepperE3 current (uint16_t) * 572 M906 E3 Stepper E3 current (uint16_t)
* 576 M906 E4 stepperE4 current (uint16_t) * 576 M906 E4 Stepper E4 current (uint16_t)
* *
* LIN_ADVANCE: 8 bytes * LIN_ADVANCE: 8 bytes
* 580 M900 K extruder_advance_k (float) * 580 M900 K extruder_advance_k (float)
* 584 M900 WHD advance_ed_ratio (float) * 584 M900 WHD advance_ed_ratio (float)
* *
* 588 Minimum end-point * HAS_MOTOR_CURRENT_PWM:
* 1909 (588 + 36 + 9 + 288 + 988) Maximum end-point * 588 M907 X Stepper XY current (uint32_t)
* 592 M907 Z Stepper Z current (uint32_t)
* 596 M907 E Stepper E current (uint32_t)
*
* 600 Minimum end-point
* 1921 (600 + 36 + 9 + 288 + 988) Maximum end-point
* *
* ======================================================================== * ========================================================================
* meshes_begin (between max and min end-point, directly above) * meshes_begin (between max and min end-point, directly above)
@ -177,6 +182,7 @@ MarlinSettings settings;
#include "planner.h" #include "planner.h"
#include "temperature.h" #include "temperature.h"
#include "ultralcd.h" #include "ultralcd.h"
#include "stepper.h"
#if ENABLED(INCH_MODE_SUPPORT) || (ENABLED(ULTIPANEL) && ENABLED(TEMPERATURE_UNITS_SUPPORT)) #if ENABLED(INCH_MODE_SUPPORT) || (ENABLED(ULTIPANEL) && ENABLED(TEMPERATURE_UNITS_SUPPORT))
#include "gcode.h" #include "gcode.h"
@ -238,6 +244,10 @@ void MarlinSettings::postprocess() {
refresh_bed_level(); refresh_bed_level();
//set_bed_leveling_enabled(leveling_is_on); //set_bed_leveling_enabled(leveling_is_on);
#endif #endif
#if HAS_MOTOR_CURRENT_PWM
stepper.refresh_motor_power();
#endif
} }
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
@ -626,6 +636,13 @@ void MarlinSettings::postprocess() {
EEPROM_WRITE(dummy); EEPROM_WRITE(dummy);
#endif #endif
#if HAS_MOTOR_CURRENT_PWM
for (uint8_t q = 3; q--;) EEPROM_WRITE(stepper.motor_current_setting[q]);
#else
const uint32_t dummyui32 = 0;
for (uint8_t q = 3; q--;) EEPROM_WRITE(dummyui32);
#endif
if (!eeprom_error) { if (!eeprom_error) {
const int eeprom_size = eeprom_index; const int eeprom_size = eeprom_index;
@ -979,6 +996,13 @@ void MarlinSettings::postprocess() {
EEPROM_READ(dummy); EEPROM_READ(dummy);
#endif #endif
#if HAS_MOTOR_CURRENT_PWM
for (uint8_t q = 3; q--;) EEPROM_READ(stepper.motor_current_setting[q]);
#else
uint32_t dummyui32;
for (uint8_t q = 3; q--;) EEPROM_READ(dummyui32);
#endif
if (working_crc == stored_crc) { if (working_crc == stored_crc) {
postprocess(); postprocess();
SERIAL_ECHO_START(); SERIAL_ECHO_START();
@ -1309,6 +1333,12 @@ void MarlinSettings::reset() {
planner.advance_ed_ratio = LIN_ADVANCE_E_D_RATIO; planner.advance_ed_ratio = LIN_ADVANCE_E_D_RATIO;
#endif #endif
#if HAS_MOTOR_CURRENT_PWM
uint32_t tmp_motor_current_setting[3] = PWM_MOTOR_CURRENT;
for (uint8_t q = 3; q--;)
stepper.digipot_current(q, (stepper.motor_current_setting[q] = tmp_motor_current_setting[q]));
#endif
#if ENABLED(AUTO_BED_LEVELING_UBL) #if ENABLED(AUTO_BED_LEVELING_UBL)
ubl.reset(); ubl.reset();
#endif #endif
@ -1788,6 +1818,18 @@ void MarlinSettings::reset() {
SERIAL_ECHOPAIR(" M900 K", planner.extruder_advance_k); SERIAL_ECHOPAIR(" M900 K", planner.extruder_advance_k);
SERIAL_ECHOLNPAIR(" R", planner.advance_ed_ratio); SERIAL_ECHOLNPAIR(" R", planner.advance_ed_ratio);
#endif #endif
#if HAS_MOTOR_CURRENT_PWM
CONFIG_ECHO_START;
if (!forReplay) {
SERIAL_ECHOLNPGM("Stepper motor currents:");
CONFIG_ECHO_START;
}
SERIAL_ECHOPAIR(" M907 X", stepper.motor_current_setting[0]);
SERIAL_ECHOPAIR(" Z", stepper.motor_current_setting[1]);
SERIAL_ECHOPAIR(" E", stepper.motor_current_setting[2]);
SERIAL_EOL();
#endif
} }
#endif // !DISABLE_M503 #endif // !DISABLE_M503

4
Marlin/pins_MINIRAMBO.h
View File

@ -85,7 +85,9 @@
#define MOTOR_CURRENT_PWM_Z_PIN 45 #define MOTOR_CURRENT_PWM_Z_PIN 45
#define MOTOR_CURRENT_PWM_E_PIN 44 #define MOTOR_CURRENT_PWM_E_PIN 44
// Motor current PWM conversion, PWM value = MotorCurrentSetting * 255 / range // Motor current PWM conversion, PWM value = MotorCurrentSetting * 255 / range
#define MOTOR_CURRENT_PWM_RANGE 2000 #ifndef MOTOR_CURRENT_PWM_RANGE
#define MOTOR_CURRENT_PWM_RANGE 2000
#endif
#define DEFAULT_PWM_MOTOR_CURRENT {1300, 1300, 1250} #define DEFAULT_PWM_MOTOR_CURRENT {1300, 1300, 1250}
// //

4
Marlin/pins_ULTIMAIN_2.h
View File

@ -74,7 +74,9 @@
#define MOTOR_CURRENT_PWM_Z_PIN 45 #define MOTOR_CURRENT_PWM_Z_PIN 45
#define MOTOR_CURRENT_PWM_E_PIN 46 #define MOTOR_CURRENT_PWM_E_PIN 46
// Motor current PWM conversion, PWM value = MotorCurrentSetting * 255 / range // Motor current PWM conversion, PWM value = MotorCurrentSetting * 255 / range
#define MOTOR_CURRENT_PWM_RANGE 2000 #ifndef MOTOR_CURRENT_PWM_RANGE
#define MOTOR_CURRENT_PWM_RANGE 2000
#endif
#define DEFAULT_PWM_MOTOR_CURRENT {1300, 1300, 1250} #define DEFAULT_PWM_MOTOR_CURRENT {1300, 1300, 1250}
// //

77
Marlin/stepper.cpp
View File

@ -72,6 +72,10 @@ block_t* Stepper::current_block = NULL; // A pointer to the block currently bei
bool Stepper::performing_homing = false; bool Stepper::performing_homing = false;
#endif #endif
#if HAS_MOTOR_CURRENT_PWM
uint32_t Stepper::motor_current_setting[3] = PWM_MOTOR_CURRENT;
#endif
// private: // private:
uint8_t Stepper::last_direction_bits = 0; // The next stepping-bits to be output uint8_t Stepper::last_direction_bits = 0; // The next stepping-bits to be output
@ -1457,34 +1461,29 @@ void Stepper::report_positions() {
#endif // HAS_DIGIPOTSS #endif // HAS_DIGIPOTSS
#if HAS_DIGIPOTSS || HAS_MOTOR_CURRENT_PWM #if HAS_MOTOR_CURRENT_PWM
void Stepper::digipot_init() { void Stepper::refresh_motor_power() {
#if HAS_DIGIPOTSS for (uint8_t i = 0; i < COUNT(motor_current_setting); ++i) {
static const uint8_t digipot_motor_current[] = DIGIPOT_MOTOR_CURRENT; switch (i) {
SPI.begin();
SET_OUTPUT(DIGIPOTSS_PIN);
for (uint8_t i = 0; i < COUNT(digipot_motor_current); i++) {
//digitalPotWrite(digipot_ch[i], digipot_motor_current[i]);
digipot_current(i, digipot_motor_current[i]);
}
#elif HAS_MOTOR_CURRENT_PWM
#if PIN_EXISTS(MOTOR_CURRENT_PWM_XY) #if PIN_EXISTS(MOTOR_CURRENT_PWM_XY)
SET_OUTPUT(MOTOR_CURRENT_PWM_XY_PIN); case 0:
digipot_current(0, motor_current_setting[0]);
#endif #endif
#if PIN_EXISTS(MOTOR_CURRENT_PWM_Z) #if PIN_EXISTS(MOTOR_CURRENT_PWM_Z)
SET_OUTPUT(MOTOR_CURRENT_PWM_Z_PIN); case 1:
digipot_current(1, motor_current_setting[1]);
#endif #endif
#if PIN_EXISTS(MOTOR_CURRENT_PWM_E) #if PIN_EXISTS(MOTOR_CURRENT_PWM_E)
SET_OUTPUT(MOTOR_CURRENT_PWM_E_PIN); case 2:
digipot_current(2, motor_current_setting[2]);
#endif
//Set timer5 to 31khz so the PWM of the motor power is as constant as possible. (removes a buzzing noise)
TCCR5B = (TCCR5B & ~(_BV(CS50) | _BV(CS51) | _BV(CS52))) | _BV(CS50);
#endif #endif
digipot_current(i, motor_current_setting[i]);
default: break;
} }
}
}
#endif // HAS_MOTOR_CURRENT_PWM
#if HAS_DIGIPOTSS || HAS_MOTOR_CURRENT_PWM
void Stepper::digipot_current(const uint8_t driver, const int current) { void Stepper::digipot_current(const uint8_t driver, const int current) {
@ -1494,6 +1493,10 @@ void Stepper::report_positions() {
digitalPotWrite(digipot_ch[driver], current); digitalPotWrite(digipot_ch[driver], current);
#elif HAS_MOTOR_CURRENT_PWM #elif HAS_MOTOR_CURRENT_PWM
if (WITHIN(driver, 0, 2))
motor_current_setting[driver] = current; // update motor_current_setting
#define _WRITE_CURRENT_PWM(P) analogWrite(MOTOR_CURRENT_PWM_## P ##_PIN, 255L * current / (MOTOR_CURRENT_PWM_RANGE)) #define _WRITE_CURRENT_PWM(P) analogWrite(MOTOR_CURRENT_PWM_## P ##_PIN, 255L * current / (MOTOR_CURRENT_PWM_RANGE))
switch (driver) { switch (driver) {
#if PIN_EXISTS(MOTOR_CURRENT_PWM_XY) #if PIN_EXISTS(MOTOR_CURRENT_PWM_XY)
@ -1509,6 +1512,40 @@ void Stepper::report_positions() {
#endif #endif
} }
void Stepper::digipot_init() {
#if HAS_DIGIPOTSS
static const uint8_t digipot_motor_current[] = DIGIPOT_MOTOR_CURRENT;
SPI.begin();
SET_OUTPUT(DIGIPOTSS_PIN);
for (uint8_t i = 0; i < COUNT(digipot_motor_current); i++) {
//digitalPotWrite(digipot_ch[i], digipot_motor_current[i]);
digipot_current(i, digipot_motor_current[i]);
}
#elif HAS_MOTOR_CURRENT_PWM
#if PIN_EXISTS(MOTOR_CURRENT_PWM_XY)
SET_OUTPUT(MOTOR_CURRENT_PWM_XY_PIN);
#endif
#if PIN_EXISTS(MOTOR_CURRENT_PWM_Z)
SET_OUTPUT(MOTOR_CURRENT_PWM_Z_PIN);
#endif
#if PIN_EXISTS(MOTOR_CURRENT_PWM_E)
SET_OUTPUT(MOTOR_CURRENT_PWM_E_PIN);
#endif
refresh_motor_power();
// Set Timer5 to 31khz so the PWM of the motor power is as constant as possible. (removes a buzzing noise)
SET_CS5(PRESCALER_1);
#endif
}
#endif #endif
#if HAS_MICROSTEPS #if HAS_MICROSTEPS

20
Marlin/stepper.h
View File

@ -91,6 +91,13 @@ class Stepper {
static bool performing_homing; static bool performing_homing;
#endif #endif
#if HAS_MOTOR_CURRENT_PWM
#ifndef PWM_MOTOR_CURRENT
#define PWM_MOTOR_CURRENT DEFAULT_PWM_MOTOR_CURRENT
#endif
static uint32_t motor_current_setting[3];
#endif
private: private:
static uint8_t last_direction_bits; // The next stepping-bits to be output static uint8_t last_direction_bits; // The next stepping-bits to be output
@ -132,13 +139,6 @@ class Stepper {
static volatile long endstops_trigsteps[XYZ]; static volatile long endstops_trigsteps[XYZ];
static volatile long endstops_stepsTotal, endstops_stepsDone; static volatile long endstops_stepsTotal, endstops_stepsDone;
#if HAS_MOTOR_CURRENT_PWM
#ifndef PWM_MOTOR_CURRENT
#define PWM_MOTOR_CURRENT DEFAULT_PWM_MOTOR_CURRENT
#endif
static constexpr int motor_current_setting[3] = PWM_MOTOR_CURRENT;
#endif
// //
// Positions of stepper motors, in step units // Positions of stepper motors, in step units
// //
@ -279,6 +279,10 @@ class Stepper {
return endstops_trigsteps[axis] * planner.steps_to_mm[axis]; return endstops_trigsteps[axis] * planner.steps_to_mm[axis];
} }
#if HAS_MOTOR_CURRENT_PWM
static void refresh_motor_power();
#endif
private: private:
static FORCE_INLINE unsigned short calc_timer(unsigned short step_rate) { static FORCE_INLINE unsigned short calc_timer(unsigned short step_rate) {
@ -380,7 +384,9 @@ class Stepper {
// SERIAL_ECHOLN(current_block->final_advance/256.0); // SERIAL_ECHOLN(current_block->final_advance/256.0);
} }
#if HAS_DIGIPOTSS || HAS_MOTOR_CURRENT_PWM
static void digipot_init(); static void digipot_init();
#endif
#if HAS_MICROSTEPS #if HAS_MICROSTEPS
static void microstep_init(); static void microstep_init();

24
Marlin/ultralcd.cpp
View File

@ -1249,6 +1249,7 @@ void kill_screen(const char* lcd_msg) {
* *
*/ */
#if ENABLED(DAC_STEPPER_CURRENT) #if ENABLED(DAC_STEPPER_CURRENT)
void dac_driver_getValues() { LOOP_XYZE(i) driverPercent[i] = dac_current_get_percent((AxisEnum)i); } void dac_driver_getValues() { LOOP_XYZE(i) driverPercent[i] = dac_current_get_percent((AxisEnum)i); }
void dac_driver_commit() { dac_current_set_percents(driverPercent); } void dac_driver_commit() { dac_current_set_percents(driverPercent); }
@ -1266,7 +1267,27 @@ void kill_screen(const char* lcd_msg) {
MENU_ITEM(function, MSG_DAC_EEPROM_WRITE, dac_driver_eeprom_write); MENU_ITEM(function, MSG_DAC_EEPROM_WRITE, dac_driver_eeprom_write);
END_MENU(); END_MENU();
} }
#endif // DAC_STEPPER_CURRENT
#if HAS_MOTOR_CURRENT_PWM
void lcd_pwm_menu() {
START_MENU();
MENU_BACK(MSG_CONTROL);
#if PIN_EXISTS(MOTOR_CURRENT_PWM_XY)
MENU_ITEM_EDIT_CALLBACK(long5, MSG_X MSG_Y, &stepper.motor_current_setting[0], 100, 2000, Stepper::refresh_motor_power);
#endif #endif
#if PIN_EXISTS(MOTOR_CURRENT_PWM_Z)
MENU_ITEM_EDIT_CALLBACK(long5, MSG_Z, &stepper.motor_current_setting[1], 100, 2000, Stepper::refresh_motor_power);
#endif
#if PIN_EXISTS(MOTOR_CURRENT_PWM_E)
MENU_ITEM_EDIT_CALLBACK(long5, MSG_E, &stepper.motor_current_setting[2], 100, 2000, Stepper::refresh_motor_power);
#endif
END_MENU();
}
#endif // HAS_MOTOR_CURRENT_PWM
constexpr int16_t heater_maxtemp[HOTENDS] = ARRAY_BY_HOTENDS(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP, HEATER_3_MAXTEMP, HEATER_4_MAXTEMP); constexpr int16_t heater_maxtemp[HOTENDS] = ARRAY_BY_HOTENDS(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP, HEATER_3_MAXTEMP, HEATER_4_MAXTEMP);
@ -2894,6 +2915,9 @@ void kill_screen(const char* lcd_msg) {
#if ENABLED(DAC_STEPPER_CURRENT) #if ENABLED(DAC_STEPPER_CURRENT)
MENU_ITEM(submenu, MSG_DRIVE_STRENGTH, lcd_dac_menu); MENU_ITEM(submenu, MSG_DRIVE_STRENGTH, lcd_dac_menu);
#endif #endif
#if HAS_MOTOR_CURRENT_PWM
MENU_ITEM(submenu, MSG_DRIVE_STRENGTH, lcd_pwm_menu);
#endif
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
MENU_ITEM(submenu, MSG_BLTOUCH, bltouch_menu); MENU_ITEM(submenu, MSG_BLTOUCH, bltouch_menu);

Write Preview
Loading…
Cancel
Save